Jump to content
urikedr

Antminer s17, s17+

Recommended Posts

Нет, с дядей и инетом там все в порядке. 

Share this post


Link to post
Share on other sites

такое впечатление что стоит на найсе

Share this post


Link to post
Share on other sites
21 минуту назад, adv сказал:

такое впечатление что стоит на найсе

судя по графику это slushpool

Share this post


Link to post
Share on other sites
6 часов назад, knyshaleksandr6 сказал:

Нет, с дядей и инетом там все в порядке. 

 

Это они Вам так сказали?

12 часов назад, knyshaleksandr6 сказал:

на некоторых из них постоянно происходит перезагрузка

 

Не на одном, а на нескольких..так не бывает из-за "все нормально"

Share this post


Link to post
Share on other sites
1 час назад, kip102 сказал:

судя по графику это slushpool

На Слаше очень много  теряется из-за отключения майнера хотя бы на минуту-две, а восстанавливается потом 20-30 минут.

 

@knyshaleksandr6 я пока бы свалил со Слаша пока не будет решена проблема такого "рваного" хешрейта.

По проблеме: что происходит когда майнер уходит со Слаша ? Переходит на запасной пул или вообще не майнит? Это можно в морде увидеть.

Если вообще не майнит, то дело либо в интернете (что очень странно), либо в питании (может такое быть, но тоже странно, чтоб так часто, БП гавно, что ли), либо сами асики барахлят. Чудес не бывает. Исключайте по одному.

Share this post


Link to post
Share on other sites

Было подобное. Вылечилось обновлением прошивки. 

Share this post


Link to post
Share on other sites

Есть ванная с имерсионкой, в ней 4 S17Pro, два асика посадил на одну фазу, два на другую. На каждую фазу поставил по стабилизатору Ресанта 13,5квт. Асики работают в режиме Нормал и через разное время (2-3 часа) хешрейт падает до нуля то у одного, то у другого асика. Прикрепил логи, если кто умеет их читать, подскажите в чем проблема.

log1.txt log2.txt log3.txt

Share this post


Link to post
Share on other sites
2019-09-28 09:30:35 power_api.c:63:check_voltage: target_vol = 18.20, actural_vol = 0.00, more than 0.5v diff.
2019-09-28 09:30:36 driver-btm-api.c:191:set_miner_status: ERROR_POWER_LOST
2019-09-28 09:30:36 driver-btm-api.c:132:stop_mining: stop mining: power set failed!
2019-09-28 09:30:36 thread.c:714:cancel_check_miner_status_thread: cancel thread
2019-09-28 09:30:36 thread.c:688:cancel_temperature_monitor_thread: cancel thread
2019-09-28 09:30:36 thread.c:698:cancel_read_nonce_reg_thread: cancel thread
2019-09-28 09:30:36 driver-btm-api.c:118:killall_hashboard: ****power off hashboard****

что-то с питанием у вас похоже, вольтаж в 0 упал.

Share this post


Link to post
Share on other sites

У этих, и T17,  есть реальная, постоянная, проблема с блоками питания.

Мы всех наших покупателей об этом предупреждаем.

В продаже, в России, у кого нибудь, не видел блоки питания для этих аппаратов, только ремонт, не быстро, и не дёшево.

BITMAIN их поштучно не продаёт.

Share this post


Link to post
Share on other sites
21.07.2019 в 12:58, isazon4ik сказал:

Ещё бы найти кто ремонтирует

Тоже на одном S17 Pro умерла плата

asicfox.com.ua

одна из лучших компаний по ремонту и продаже 

Share this post


Link to post
Share on other sites
06.10.2019 в 23:47, FORMOSAPLUS сказал:

У этих, и T17,  есть реальная, постоянная, проблема с блоками питания.

Мы всех наших покупателей об этом предупреждаем.

В продаже, в России, у кого нибудь, не видел блоки питания для этих аппаратов, только ремонт, не быстро, и не дёшево.

BITMAIN их поштучно не продаёт.

продают, зайди на сайт Bitmain

Share this post


Link to post
Share on other sites
1 час назад, Norskiy сказал:

продают, зайди на сайт Bitmain

Вот теперь продают.

Узнали наверно что другие производители блоков питания сейчас тоже запускают производство этих блоков.

Правильно было бы для BITMAIN их начать продавать с началом выпуска этих аппаратов.

Теперь у владельцев этих аппаратов проблем с заменой блока питания проблем будет меньше.

Блок питания можно купить здесь.

https://shop.bitmain.com/product/detail?pid=0002019072316001724716dkNtX50679

 

Share this post


Link to post
Share on other sites
6 минут назад, FORMOSAPLUS сказал:

Вот теперь продают.

Их продают уже как несколько месяцев

Share this post


Link to post
Share on other sites
07.10.2019 в 04:47, FORMOSAPLUS сказал:

В продаже, в России, у кого нибудь, не видел блоки питания для этих аппаратов, только ремонт, не быстро, и не дёшево.

Плохо смотрел, хотя из Китая, да не видно. В Москве из наличия цены в районе 20 т.р.

Share this post


Link to post
Share on other sites
2 часа назад, mild сказал:

Плохо смотрел, хотя из Китая, да не видно. В Москве из наличия цены в районе 20 т.р.

Реально не видно из Китая, но я не с горы смотрю что есть в России, а через интернет.

Вы бы контакт дали ТС в личку где купить можно из наличия в Москве.

12 часов назад, mild сказал:

Их продают уже как несколько месяцев

Да, верно, но только оптом, а теперь уже и розницу сделали.

Share this post


Link to post
Share on other sites

Друзья, всем доброго времени суток! 2 с17 про, о которых я писал ранее вышли из строя, из за перегрева (было жарко на балконе, не уследил). Успешно заменили на новые по гарантии. Не прошло и 3 месяцев я снова столкнулся с проблемой. При запуске на некоторых платах либо частично, либо полностью не видит чипы. Пример гол:

 

2020-02-07 22:03:59 driver/power_api.c:269:set_iic_power_by_voltage: now setting voltage to : 21.000000 
2020-02-07 22:04:00 driver/driver-hash-chip.c:32:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2020-02-07 22:04:00 driver/driver-hash-chip.c:32:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2020-02-07 22:04:00 driver/driver-hash-chip.c:32:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2020-02-07 22:04:00 driver/uart.c:64:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-02-07 22:04:10 driver/driver-btm-api.c:1107:check_asic_number_with_power_on: Chain[0]: find 47 asic, times 0
2020-02-07 22:04:21 driver/driver-btm-api.c:1107:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 1
2020-02-07 22:04:32 driver/driver-btm-api.c:1107:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2020-02-07 22:04:43 driver/driver-btm-api.c:1107:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2020-02-07 22:04:53 driver/driver-btm-api.c:1107:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2020-02-07 22:04:53 driver/driver-btm-api.c:1119:check_asic_number_with_power_on: Chain 1 only find 0 asic, will power off hash board 1
2020-02-07 22:05:06 driver/driver-btm-api.c:1107:check_asic_number_with_power_on: Chain[2]: find 48 asic, times 0
2020-02-07 22:05:06 driver/driver-btm-api.c:801:set_order_clock: chain[0]: set order clock, stragegy 3
2020-02-07 22:05:06 driver/driver-btm-api.c:801:set_order_clock: chain[2]: set order clock, stragegy 3
2020-02-07 22:05:10 driver/driver-hash-chip.c:143:set_clock_delay_control: core_data = 0x34
2020-02-07 22:05:10 voltage[0] = 1870
2020-02-07 22:05:10 voltage[2] = 1870

 

Странно, но время от времени они могут запуститься, потом снова не распознаются. Находятся асики на балконе, температура колеблится от -5 до +15 в зависимости от температуры на улице. Стоят они в шумоподавляющем боксе. Так как они иногда запускаются, считаю что это глюк, и плата не повреждена. Гарантии уже на них нет. Чищу регулрно, сильно не пылятся. Юзал оригинальную прошивку долго, глюк появился на ней, Потом ставил от ниша и мскмайнер, результатов не дало. Может кто сталкивался с такой проблемой?

 

Share this post


Link to post
Share on other sites

И ещё один вопрос, на pool.btc.com работает норм, ошибок почти нет. на найс хеш профит выше, но выдаёт кучу ошибок и температура сипов и плат повышается примерно на 25%. 

 

Пробовал настраивать на разные серверы, на европе больше всего ошибок, более стабильно работает на американском. 

 

пробавал и стандартный stratum+tcp://sha256.usa.nicehash.com:3334

и модернизированный stratum+tcp://sha256asicboost.usa.nicehash.com:3334#xnsub 

 

Толку нет, везде кучу ошибок. Они время от времени прекращаются, потом опять прут. 

На 4 с17 про одно и то же, кто нибудь юзал найсхеш на с17?

Снимок экрана 2020-02-02 в 20.37.57.png

Share this post


Link to post
Share on other sites

По поводу найса разобрался, в службе поддержки посоветовали стратум сервер stratum+tcp://sha256asicboost.eu.nicehash.com:3368 и всё заработало почти без ошибок. Интересно почему на самом пуле рекомендуют использовать сервер, на котором куча ошибок.

Share this post


Link to post
Share on other sites
2020-03-29 18:31:19 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-29 18:31:21 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-29 18:31:21 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-29 18:31:21 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-29 18:31:21 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-29 18:31:23 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-29 18:31:23 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-29 18:31:23 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-29 18:31:23 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-29 18:31:23 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-29 18:31:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-29 18:31:24 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-29 18:31:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-29 18:31:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-29 18:31:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-29 18:31:26 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-29 18:31:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-29 18:31:26 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-29 18:31:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-29 18:31:27 thread.c:577:check_temperature: over max temp, pcb temp 74 (max 80), chip temp 88(max 100) pcb temp rise 1 (max 10) chip temp rise 211 (max 20)
2020-03-29 18:31:27 driver-btm-api.c:194:set_miner_status: ERROR_TEMP_TOO_HIGH
2020-03-29 18:31:27 driver-btm-api.c:135:stop_mining: stop mining: over max temp
2020-03-29 18:31:27 thread.c:818:cancel_temperature_monitor_thread: cancel thread
2020-03-29 18:31:27 thread.c:844:cancel_check_system_status_thread: cancel thread
2020-03-29 18:31:27 thread.c:833:cancel_read_nonce_reg_thread: cancel thread
2020-03-29 18:31:27 driver-btm-api.c:120:killall_hashboard: ****power off hashboard****
2020-03-29 20:15:37 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-29 20:16:27 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 00:11:28 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 00:12:18 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 00:32:19 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 00:33:09 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 01:45:19 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 01:46:09 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 01:55:29 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 01:55:49 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 04:41:38 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 04:42:28 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 06:04:09 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 06:04:27 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4

Вот такая ошибка, что то с датчиком температуры, асику месяц. 

По переводу лога, видно и можно предположить, либо жарко сильно в помещении, либо датчик сломан, работает примерно 12 часов, и такая ошибка

Может кто сталкивался? Кто что подскажет

Температура в помещении не поменялась, первый месяц работал исправно

 

в окне статуса майнера xxxx на чипах нету нету

Edited by Слава Попов

Share this post


Link to post
Share on other sites

А где стоит, интересный вопрос? Кто-то из местных регуляров, в просте все про антминер, писал, что времена легко читаемых логов S9-х. канули в лету, на последних батчах логи курить можно долго...

Share this post


Link to post
Share on other sites

Вариант попробовать убрать глючную плату. Хотя может и правда перегревается, дело к лету идет.

Да и разобрать прочистить лишним не будет.

 

Edited by feNDer2k5

Share this post


Link to post
Share on other sites

Ну и что тут непонятного? отключение по перегреву. У 17ых есть фича, чтоб 60% мощности запустить? Если есть, попробуй и смотри, будет вырубаться или нет.

Share this post


Link to post
Share on other sites

@Слава Попов Покажите лог полностью. Скройте его под спойлер или прикрепите в текстовом файле.

Share this post


Link to post
Share on other sites
18 часов назад, Splinter сказал:

@Слава Попов Покажите лог полностью. Скройте его под спойлер или прикрепите в текстовом файле.

Скрытый текст

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203528K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25848K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12808K (cce7e000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 7/2, WL threshold: 4096, image sequence number: 237714726
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 22/14, WL threshold: 4096, image sequence number: 3265111179
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-03-30 10:24:21 driver-btm-api.c:650:init_freq_mode: This is scan-user version
2020-03-30 10:24:21 driver-btm-api.c:1833:bitmain_soc_init: opt_multi_version     = 1
2020-03-30 10:24:21 driver-btm-api.c:1834:bitmain_soc_init: opt_bitmain_ab        = 1
2020-03-30 10:24:21 driver-btm-api.c:1835:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-03-30 10:24:21 driver-btm-api.c:1836:bitmain_soc_init: Miner compile time: Mon Dec 16 12:57:06 CST 2019 type: Antminer S17+
2020-03-30 10:24:21 driver-btm-api.c:1837:bitmain_soc_init: commit version: cb79652 2019-12-16 10:49:27, build by: lol 2019-12-16 13:09:06
2020-03-30 10:24:21 driver-btm-api.c:1673:show_sn: no SN got, please write SN to /nvdata/sn
2020-03-30 10:24:21 fan.c:256:front_fan_power_on: Note: front fan is power on!
2020-03-30 10:24:21 fan.c:268:rear_fan_power_on: Note: rear fan is power on!
2020-03-30 10:24:21 driver-btm-api.c:1128:miner_device_init: Detect 256MB control board of XILINX
2020-03-30 10:24:21 driver-btm-api.c:1076:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-03-30 10:24:21 thread.c:783:create_read_nonce_reg_thread: create thread
2020-03-30 10:24:27 driver-btm-api.c:1060:init_miner_version: miner ID : 8032c4242b104814
2020-03-30 10:24:27 driver-btm-api.c:1066:init_miner_version: FPGA Version = 0xB023
2020-03-30 10:24:32 driver-btm-api.c:707:get_product_id: product_id[0] = 0
2020-03-30 10:24:32 driver-btm-api.c:707:get_product_id: product_id[1] = 0
2020-03-30 10:24:32 driver-btm-api.c:707:get_product_id: product_id[2] = 0
2020-03-30 10:24:32 driver-btm-api.c:663:_set_project_type: project:0
2020-03-30 10:24:32 driver-btm-api.c:683:_set_project_type: Project type: Antminer S17+
2020-03-30 10:24:32 driver-btm-api.c:694:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-03-30 10:24:32 driver-btm-api.c:695:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-03-30 10:24:32 driver-btm-api.c:694:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-03-30 10:24:32 driver-btm-api.c:695:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-03-30 10:24:32 driver-btm-api.c:694:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-03-30 10:24:32 driver-btm-api.c:695:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-03-30 10:24:34 driver-btm-api.c:1782:bitmain_board_init: Fan check passed.
2020-03-30 10:24:35 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-03-30 10:24:37 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-03-30 10:24:38 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-03-30 10:24:41 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-03-30 10:24:42 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-03-30 10:24:44 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-03-30 10:24:44 thread.c:778:create_pic_heart_beat_thread: create thread
2020-03-30 10:24:44 power_api.c:208:power_init: Power init:
2020-03-30 10:24:44 power_api.c:209:power_init: current_voltage_raw = 0
2020-03-30 10:24:44 power_api.c:210:power_init: highest_voltage_raw = 2100
2020-03-30 10:24:44 power_api.c:211:power_init: working_voltage_raw = 1950
2020-03-30 10:24:44 power_api.c:212:power_init: higher_voltage_raw  = 2040
2020-03-30 10:24:44 driver-btm-api.c:1792:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-03-30 10:24:44 power_api.c:182:power_off: init gpio907
2020-03-30 10:25:16 power_api.c:262:set_to_highest_voltage: Set to voltage raw 2100, one step.
2020-03-30 10:25:18 power_api.c:83:check_voltage_multi: retry time: 0
2020-03-30 10:25:19 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 21.113811
2020-03-30 10:25:20 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 21.183907
2020-03-30 10:25:21 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 21.186701
2020-03-30 10:25:21 power_api.c:51:_get_avg_voltage: average_voltage = 21.161473
2020-03-30 10:25:21 power_api.c:69:check_voltage: target_vol = 21.00, actural_vol = 21.16, check voltage passed.
2020-03-30 10:25:21 uart.c:71:set_baud: set fpga_baud to 115200
2020-03-30 10:25:21 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2020-03-30 10:25:21 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2020-03-30 10:25:21 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2020-03-30 10:25:32 driver-btm-api.c:1000:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-03-30 10:25:43 driver-btm-api.c:1000:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2020-03-30 10:25:54 driver-btm-api.c:1000:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2020-03-30 10:26:03 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-03-30 10:26:03 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3
2020-03-30 10:26:03 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3
2020-03-30 10:26:03 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3
2020-03-30 10:26:03 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-03-30 10:26:03 voltage[0] = 1980
2020-03-30 10:26:03 voltage[1] = 1980
2020-03-30 10:26:03 voltage[2] = 1980
2020-03-30 10:26:03 power_api.c:220:set_working_voltage_raw: working_voltage_raw = 1980
2020-03-30 10:26:04 temperature.c:315:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-03-30 10:26:05 temperature.c:315:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2020-03-30 10:26:07 temperature.c:315:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2020-03-30 10:26:07 uart.c:71:set_baud: set fpga_baud to 12000000
2020-03-30 10:26:07 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 12000000, chip_divider = 3
2020-03-30 10:26:07 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 12000000, chip_divider = 3
2020-03-30 10:26:07 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 12000000, chip_divider = 3
2020-03-30 10:26:08 driver-btm-api.c:241:check_bringup_temp: Bring up temperature is 38
2020-03-30 10:26:08 thread.c:798:create_check_miner_status_thread: create thread
2020-03-30 10:26:08 thread.c:788:create_show_miner_status_thread: create thread
2020-03-30 10:26:08 thread.c:768:create_temperature_monitor_thread: create thread
2020-03-30 10:26:08 freq_tuning.c:149:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-03-30 10:26:08 frequency.c:770:inc_freq_with_fixed_vco: chain = 255, freq = 505, is_higher_voltage = true
2020-03-30 10:26:08 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2070, step by step.
2020-03-30 10:26:10 power_api.c:83:check_voltage_multi: retry time: 0
2020-03-30 10:26:11 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.747125
2020-03-30 10:26:12 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.817602
2020-03-30 10:26:13 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 20.795656
2020-03-30 10:26:13 power_api.c:51:_get_avg_voltage: average_voltage = 20.786794
2020-03-30 10:26:13 power_api.c:69:check_voltage: target_vol = 20.70, actural_vol = 20.79, check voltage passed.
2020-03-30 10:26:22 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
2020-03-30 10:26:25 power_api.c:83:check_voltage_multi: retry time: 0
2020-03-30 10:26:26 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.213281
2020-03-30 10:26:27 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.308673
2020-03-30 10:26:28 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 20.286078
2020-03-30 10:26:28 power_api.c:51:_get_avg_voltage: average_voltage = 20.269344
2020-03-30 10:26:28 power_api.c:69:check_voltage: target_vol = 20.20, actural_vol = 20.27, check voltage passed.
2020-03-30 10:26:29 frequency.c:811:inc_freq_with_fixed_step: chain = 0, freq_start = 505, freq_end = 510, freq_step = 5, is_higher_voltage = true
2020-03-30 10:26:29 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 1980, step by step.
2020-03-30 10:26:31 power_api.c:83:check_voltage_multi: retry time: 0
2020-03-30 10:26:33 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 19.825031
2020-03-30 10:26:34 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 19.896683
2020-03-30 10:26:35 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 19.873562
2020-03-30 10:26:35 power_api.c:51:_get_avg_voltage: average_voltage = 19.865092
2020-03-30 10:26:35 power_api.c:69:check_voltage: target_vol = 19.80, actural_vol = 19.87, check voltage passed.
2020-03-30 10:26:35 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 0, start = 510, freq_step = 5
2020-03-30 10:26:38 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 1, start = 505, freq_step = 5
2020-03-30 10:26:46 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 2, start = 505, freq_step = 5
2020-03-30 10:26:54 driver-btm-api.c:636:set_timeout: freq = 565, percent = 90, hcn = 44236, timeout = 78
2020-03-30 10:26:54 power_api.c:304:set_to_working_voltage_by_steps: Set to voltage raw 1980, step by step.
2020-03-30 10:26:56 power_api.c:83:check_voltage_multi: retry time: 0
2020-03-30 10:26:57 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 19.825031
2020-03-30 10:26:58 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 19.872449
2020-03-30 10:26:59 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 19.898977
2020-03-30 10:26:59 power_api.c:51:_get_avg_voltage: average_voltage = 19.865485
2020-03-30 10:26:59 power_api.c:69:check_voltage: target_vol = 19.80, actural_vol = 19.87, check voltage passed.
2020-03-30 10:26:59 thread.c:793:create_check_system_status_thread: create thread
2020-03-30 10:26:59 driver-btm-api.c:1937:bitmain_soc_init: Init done!
2020-03-30 10:26:59 driver-btm-api.c:194:set_miner_status: STATUS_INIT
2020-03-30 10:27:05 driver-btm-api.c:194:set_miner_status: STATUS_OKAY
2020-03-30 10:27:06 frequency.c:129:get_ideal_hash_rate_GH: ideal_hash_rate = 68566
2020-03-30 10:27:06 frequency.c:145:get_sale_hash_rate_GH: sale_hash_rate = 67000
2020-03-30 10:27:09 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 10:57:10 thread.c:216:calc_hashrate_avg: avg rate is 69630.04 in 30 mins
2020-03-30 10:57:10 temperature.c:483:temp_statistics_show:   pcb temp 55~69  chip temp 72~82
2020-03-30 11:27:12 thread.c:216:calc_hashrate_avg: avg rate is 69200.89 in 30 mins
2020-03-30 11:27:12 temperature.c:483:temp_statistics_show:   pcb temp 55~69  chip temp 73~82
2020-03-30 11:57:14 thread.c:216:calc_hashrate_avg: avg rate is 69470.59 in 30 mins
2020-03-30 11:57:14 temperature.c:483:temp_statistics_show:   pcb temp 55~69  chip temp 73~82
2020-03-30 12:01:15 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 2, chip = 14, reg = 28
2020-03-30 12:27:16 thread.c:216:calc_hashrate_avg: avg rate is 69632.28 in 30 mins
2020-03-30 12:27:16 temperature.c:483:temp_statistics_show:   pcb temp 56~70  chip temp 74~84
2020-03-30 12:57:18 thread.c:216:calc_hashrate_avg: avg rate is 69434.59 in 30 mins
2020-03-30 12:57:18 temperature.c:483:temp_statistics_show:   pcb temp 56~70  chip temp 73~83
2020-03-30 13:27:20 thread.c:216:calc_hashrate_avg: avg rate is 69307.67 in 30 mins
2020-03-30 13:27:20 temperature.c:483:temp_statistics_show:   pcb temp 56~70  chip temp 74~83
2020-03-30 13:57:22 thread.c:216:calc_hashrate_avg: avg rate is 69555.40 in 30 mins
2020-03-30 13:57:22 temperature.c:483:temp_statistics_show:   pcb temp 56~71  chip temp 74~84
2020-03-30 14:27:24 thread.c:216:calc_hashrate_avg: avg rate is 69501.70 in 30 mins
2020-03-30 14:27:24 temperature.c:483:temp_statistics_show:   pcb temp 57~71  chip temp 74~84
2020-03-30 14:57:26 thread.c:216:calc_hashrate_avg: avg rate is 69070.93 in 30 mins
2020-03-30 14:57:26 temperature.c:483:temp_statistics_show:   pcb temp 57~71  chip temp 75~84
2020-03-30 15:27:28 thread.c:216:calc_hashrate_avg: avg rate is 69121.57 in 30 mins
2020-03-30 15:27:28 temperature.c:483:temp_statistics_show:   pcb temp 57~72  chip temp 75~84
2020-03-30 15:54:34 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 2, chip = 14, reg = 28
2020-03-30 15:57:30 thread.c:216:calc_hashrate_avg: avg rate is 69286.93 in 30 mins
2020-03-30 15:57:30 temperature.c:483:temp_statistics_show:   pcb temp 58~72  chip temp 74~85
2020-03-30 16:20:33 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:33 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:20:33 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-30 16:20:33 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:20:33 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:20:33 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:20:33 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:33 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:20:36 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:36 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:20:39 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:20:39 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:20:39 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:20:39 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:20:41 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:20:42 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:42 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:20:43 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:43 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:20:44 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:20:44 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:20:44 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:20:44 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:20:44 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:20:45 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2020-03-30 16:20:45 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:20:46 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:20:46 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:20:47 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:20:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:20:47 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:20:49 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:20:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:20:49 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:20:49 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:20:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:20:49 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:20:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:20:50 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:20:51 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:51 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:20:52 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:52 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:20:52 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:20:55 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:20:55 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:20:55 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:20:57 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-30 16:20:57 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:20:59 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:20:59 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:20:59 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:21:00 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:21:00 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:21:00 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:21:02 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:21:03 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:21:05 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-30 16:21:05 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:21:05 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:21:06 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:21:06 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2020-03-30 16:21:06 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:21:07 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:21:07 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:21:08 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:21:08 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:21:09 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:21:10 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:21:10 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:13 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:21:13 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:14 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:21:14 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:21:16 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:16 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:21:16 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:21:16 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:21:18 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:21:19 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2020-03-30 16:21:19 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:21:21 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:21:21 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:21:22 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:22 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:21:22 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:21:24 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-30 16:21:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:21:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:21:24 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:21:25 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:21:25 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:21:26 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:21:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:21:27 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:21:27 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:21:27 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:21:27 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:21:27 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:21:29 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:21:29 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:21:29 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:30 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:21:32 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:32 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:33 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:35 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:21:35 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:21:35 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:21:37 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:21:37 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:21:37 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:21:37 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:21:38 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:21:40 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:40 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:40 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:40 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:21:40 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:21:40 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:21:40 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:21:42 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:21:42 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:21:42 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:21:45 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-30 16:21:45 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:21:46 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2020-03-30 16:21:46 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:21:47 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-30 16:21:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:21:48 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:21:49 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:50 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:21:50 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:21:50 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:50 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:21:53 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:53 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:56 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 2, chip = 14, reg = 28
2020-03-30 16:21:57 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:58 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:21:58 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:21:59 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:21:59 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:21:59 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:21:59 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:01 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:22:01 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:01 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:22:02 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:02 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:22:02 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:02 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:22:03 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:22:04 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:22:04 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:22:04 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:22:04 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:04 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:22:05 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2020-03-30 16:22:05 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:22:05 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:06 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:22:07 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:07 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:22:07 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:09 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:09 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:22:09 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:09 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:22:09 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:09 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:22:10 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:22:10 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:22:14 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:22:14 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:14 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:22:15 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:22:17 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:17 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:22:20 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:22:20 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:22:22 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:22:23 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:23 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:22:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:22:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:22:26 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:22:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:22:26 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:27 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:27 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:22:30 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:22:30 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:30 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:22:31 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:22:31 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:22:31 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:31 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:22:31 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:22:33 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:22:33 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:22:33 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:22:36 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:22:36 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:36 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:22:36 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:22:36 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:22:36 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:22:37 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:37 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:22:38 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:38 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:22:38 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:38 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:22:39 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:39 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:22:39 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2020-03-30 16:22:39 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:22:39 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:41 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:22:41 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-30 16:22:41 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:22:41 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:41 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:22:42 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:22:42 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:22:42 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:22:44 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-30 16:22:44 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:22:46 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:22:46 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:22:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:22:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:22:47 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2020-03-30 16:22:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:22:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:22:49 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:22:50 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:22:50 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:22:50 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:51 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:22:52 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:22:52 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:52 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:22:52 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:52 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:22:55 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:22:55 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:22:55 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:22:57 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:22:57 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:22:58 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:23:00 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:00 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:23:00 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:00 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:00 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:00 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:23:02 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:02 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:23:02 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-30 16:23:02 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:23:03 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:03 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:23:03 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:03 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:05 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:05 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:23:08 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:23:08 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:08 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:08 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:08 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:23:09 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:23:09 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:10 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:10 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:23:11 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:23:11 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:23:11 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:11 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:23:13 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:23:13 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:23:14 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:16 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-30 16:23:16 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:23:17 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:17 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:23:18 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:23:18 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:23:19 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:19 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:23:19 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:19 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:20 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:21 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:21 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:23:21 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:21 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:23:22 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:22 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:23:24 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2020-03-30 16:23:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28
2020-03-30 16:23:24 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:24 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:24 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:23:25 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:23:29 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:29 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:23:30 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:30 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:30 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:31 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:23:32 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:32 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:23:35 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:35 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:23:35 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:23:37 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-03-30 16:23:37 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28
2020-03-30 16:23:37 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28
2020-03-30 16:23:37 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:23:38 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:38 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:40 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:40 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28
2020-03-30 16:23:41 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:42 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:42 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28
2020-03-30 16:23:42 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:23:43 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:43 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:43 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2020-03-30 16:23:43 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 10, reg = 28, got chain = 2, chip = 14, reg = 28
2020-03-30 16:23:43 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:43 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 54, reg = 28, got chain = 2, chip = 10, reg = 28
2020-03-30 16:23:43 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2020-03-30 16:23:43 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 50, reg = 28, got chain = 2, chip = 54, reg = 28
2020-03-30 16:23:44 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:45 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-03-30 16:23:45 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28
2020-03-30 16:23:45 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28
2020-03-30 16:23:46 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 14, reg = 28, got chain = 1, chip = 50, reg = 28
2020-03-30 16:23:46 temperature.c:739:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2020-03-30 16:23:46 thread.c:577:check_temperature: over max temp, pcb temp 72 (max 80), chip temp 84(max 100) pcb temp rise 1 (max 10) chip temp rise 207 (max 20)
2020-03-30 16:23:46 driver-btm-api.c:194:set_miner_status: ERROR_TEMP_TOO_HIGH
2020-03-30 16:23:46 driver-btm-api.c:135:stop_mining: stop mining: over max temp
2020-03-30 16:23:46 thread.c:818:cancel_temperature_monitor_thread: cancel thread
2020-03-30 16:23:46 thread.c:844:cancel_check_system_status_thread: cancel thread
2020-03-30 16:23:46 thread.c:833:cancel_read_nonce_reg_thread: cancel thread
2020-03-30 16:23:46 driver-btm-api.c:120:killall_hashboard: ****power off hashboard****
2020-03-30 17:36:09 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 17:36:10 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 18:59:29 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 18:59:31 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 22:36:41 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 22:37:21 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 23:07:30 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-30 23:07:48 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-30 23:59:40 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-31 00:00:30 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-31 00:20:30 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-31 00:21:10 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4
2020-03-31 09:16:00 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1
2020-03-31 09:16:20 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4

 

Вот  полный лог, поработал несколько часов и опять. 

Edited by Слава Попов

Share this post


Link to post
Share on other sites

@Слава Попов Температуру конечно стоит понижать. 82-85гр для 17-й серии это не хорошо, нежные они. Но по всей видимости это не является прямой причиной. В логе видно что происходит сбой чтения датчиков температуры. Похоже на программную ошибку при определенных условиях. За это же говорит то, что сбой происходит сразу по всем платам. Идет запрос информации от одного датчика, ответ не приходит, но при опросе следующего датчика приходит ответ от первого. Логи у 17ых не информативны и запутаны, так что утверждать что-то определенное сложно. Не видно идет ли хэширование во время сбоя по датчикам. Об этой проблеме заявляют многие пользователи, причем на разных моделях 17ой серии. Пока все мучаются с перезагрузками. Понятно что каждые 2 часа так делать - это не выход. У вас последняя прошивка, значит битмайн это не пофиксил.

Могу только посоветовать попробовать временно поставить кастомную прошивку от vnish и посмотреть уйдет ли проблема. Разработчики насколько я понимаю говорят о том, что у них это пофиксено.

Edited by Splinter

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Topics

    • Прошивка для T17, T17E, T17+, S17 Pro, S17+, S17E: сколько можно с ней заработать?

      Еще пару лет назад, чтобы получать доход от майнинга, было достаточно купить партию АСИКов модели Antminer S9 и отыскать “дешевую розетку”. Сейчас все изменилось, теперь майнерам необходимы дополнительные способы увеличения дохода.    Один из способов использовать прошивку, которая поможет снизить энергопотребление и защитить АСИКи от перегрева и вирусов. Насколько выгоднее использовать Hiveon прошивку вместо заводской? Сколько вы сможете заработать?  Все приведенные в статье д

      in Прошивки

    • Программа для мониторинга айсиков AntMiner (S4, S7, S9, L3+, D3, T9 и других)

      Всем доброго дня! Не найдя подходящий софт для мониторинга майнеров написал свой. Краткий принцип работы: программа опрашивает устройства и выводит всю важную информацию в закладке Монитор. Если айсик не отвечает, либо упала скорость или повысилась температура выше требуемой в течение двух проверок, то тогда придут уведомления на почту и SMS. Так же работает проверка по кол-ву чипов и если идет отклонение, то программа выделит это желтым цветом. Буду рад любым предложениям по улучшению

      in Мониторинг

    • Микри Чжан обвиняет Цзиханя У в незаконном вывозе 10 000 Antminer с майнинговой фермы Bitmain

      С майнинговой фермы Bitmain в китайской провинции Внутренняя Монголия вывезено около 10 000 майнеров Antminer. Бывший гендиректор Bitmain Микри Чжан обвиняет в этом Цзиханя У. В середине июля ASIC-майнеры были нелегально вывезены бывшими сотрудниками Bitmain. В результате таких действий компания и ее клиенты понесли огромный ущерб. Некоторые майнеры предпочитают работать не самостоятельно, а размещать оборудование на майнинговой ферме Bitmain за ежемесячную плату и определенный процент с

      in Новости криптовалют

    • Antminer. Все модели. Вопросы, помощь, обсуждение

      В этой теме обсуждается вся линейка продукции компании BITMAIN. А также все вопросы, связанные с использованием, настройкой, модернизацией и прочие околоANTовые вопросы.   Основные продукты:     Antminer S7 Он и правда существует!!! - https://forum.bits.media/index.php?/topic/18603-antminer-s1-s2-s3-s3-s4-s5-c1-s7-voprosy-pomosch-obsuzhdenie/page-542?p=309969&do=findComment&comment=309969   Прошивки официальные:   Образы прошивок для всех майнеров с BB

      in ASIC/FPGA майнеры

    • Ремонт: Bitmain Antminer S7, S9

      Официальный сайт | Antminer. Все модели. Вопросы, помощь, обсуждение.   В теме действуют все Правила форума! Перед тем как задать вопрос, посмотрите НОВИЧКИ Bits.Media, все сюда Уважайте своё и чужое время. Для обсуждения и поиска программ/драйверов пользуйтесь разделом Файлы.   Статьи на bits.media:   Полезное:   (!) FAQ (часто задаваемые вопросы)   -Как найти в продаже разъемы питания, какая маркиров

      in ASIC/FPGA майнеры

×
×
  • Create New...