Перейти к публикации
k291

Ремонт Antminer A3

Рекомендованные сообщения

Добрый день!

Айсик проработал 1н месяц. Появились кресты на 2й плате. Перезагрузил айсик, не видит 2-ю плату.

Переключал шлейфы. Вставлял в другой порт. Менял разьемы блока питания. Не помогает. Вытащил плату, визуально все целое. Продул. Не помогло.

В логах:

Скрытый текст

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 ([email protected]) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238884k/238884k available, 23260k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000354] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015441] pid_max: default: 32768 minimum: 301
[    0.015671] Security Framework initialized
[    0.015766] Mount-cache hash table entries: 512
[    0.024591] Initializing cgroup subsys cpuacct
[    0.024624] Initializing cgroup subsys memory
[    0.024686] Initializing cgroup subsys blkio
[    0.024820] CPU: Testing write buffer coherency: ok
[    0.025393] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025469] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026796] Brought up 1 CPUs
[    0.026820] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028111] devtmpfs: initialized
[    0.092512] pinctrl core: initialized pinctrl subsystem
[    0.092729] rstctl core: initialized rstctl subsystem
[    0.093222] regulator-dummy: no parameters
[    0.093791] NET: Registered protocol family 16
[    0.094496] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104167] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104349] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105433] platform 49000000.edma: alias fck already exists
[    0.105468] platform 49000000.edma: alias fck already exists
[    0.105496] platform 49000000.edma: alias fck already exists
[    0.106648] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106830] OMAP GPIO hardware version 0.1
[    0.108236] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109554] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110864] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111494] of_get_named_gpio_flags exited with status 52
[    0.111526] gpio-rctrl rstctl.3: loaded OK
[    0.116627] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119825] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122013] cpsw.0: No hwaddr in dt. Using c4:f3:12:cf:36:4e from efuse
[    0.122044] cpsw.1: No hwaddr in dt. Using c4:f3:12:cf:36:50 from efuse
[    0.137576] bio: create slab <bio-0> at 0
[    0.149712] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149950] of_get_named_gpio_flags: can't parse gpios property
[    0.150237] vmmcsd_fixed: 3300 mV
[    0.153358] SCSI subsystem initialized
[    0.153810] usbcore: registered new interface driver usbfs
[    0.153924] usbcore: registered new interface driver hub
[    0.154262] usbcore: registered new device driver usb
[    0.156366] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156400] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156594] media: Linux media interface: v0.10
[    0.156691] Linux video capture interface: v2.00
[    0.156807] pps_core: LinuxPPS API ver. 1 registered
[    0.156823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.157544] Advanced Linux Sound Architecture Driver Initialized.
[    0.158732] Switching to clocksource gp_timer
[    0.176761] NET: Registered protocol family 2
[    0.177756] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177846] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177936] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178029] TCP: reno registered
[    0.178056] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178102] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178589] NET: Registered protocol family 1
[    0.179174] RPC: Registered named UNIX socket transport module.
[    0.179194] RPC: Registered udp transport module.
[    0.179208] RPC: Registered tcp transport module.
[    0.179222] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179609] Trying to unpack rootfs image as initramfs...
[    1.921370] Freeing initrd memory: 12032K
[    1.922060] CPU PMU: probing PMU on CPU 0
[    1.922092] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.922717] omap2_mbox_probe: platform not supported
[    1.926597] VFS: Disk quotas dquot_6.5.2
[    1.926837] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.928163] NFS: Registering the id_resolver key type
[    1.928256] Key type id_resolver registered
[    1.928272] Key type id_legacy registered
[    1.928409] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.928848] msgmni has been set to 490
[    1.931634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.931659] io scheduler noop registered
[    1.931676] io scheduler deadline registered
[    1.931733] io scheduler cfq registered (default)
[    1.935673] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.938261] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.938534] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.599343] console [ttyO0] enabled
[    2.603864] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.612564] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.621205] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.629860] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.638841] [drm] Initialized drm 1.1.0 20060810
[    2.657532] brd: module loaded
[    2.667812] loop: module loaded
[    2.671995] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.681951] nand_get_flash_type: 2c,da against 2c,da
[    2.687479] ONFI param page 0 valid
[    2.691151] ONFI flash detected
[    2.694472] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.706384] omap2-nand: detected x8 NAND flash
[    2.711049] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.716631] omap2-nand: using custom ecc layout
[    2.721475] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.727869] Creating 10 MTD partitions on "omap2-nand.0":
[    2.733547] 0x000000000000-0x000000020000 : "spl"
[    2.740342] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.747812] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.755224] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.762634] 0x000000080000-0x000000240000 : "u-boot"
[    2.770896] 0x000000240000-0x000000260000 : "bootenv"
[    2.777808] 0x000000260000-0x000000280000 : "fdt"
[    2.784446] 0x000000280000-0x000000780000 : "kernel"
[    2.795419] 0x000000800000-0x000001c00000 : "root"
[    2.818898] 0x000001c00000-0x000003000000 : "config"
[    2.842709] OneNAND driver initializing
[    2.848443] usbcore: registered new interface driver asix
[    2.854265] usbcore: registered new interface driver cdc_ether
[    2.860514] usbcore: registered new interface driver smsc95xx
[    2.866632] usbcore: registered new interface driver net1080
[    2.872660] usbcore: registered new interface driver cdc_subset
[    2.878956] usbcore: registered new interface driver zaurus
[    2.884963] usbcore: registered new interface driver cdc_ncm
[    2.891739] usbcore: registered new interface driver cdc_acm
[    2.897696] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.906074] Initializing USB Mass Storage driver...
[    2.911315] usbcore: registered new interface driver usb-storage
[    2.917615] USB Mass Storage support registered.
[    2.922677] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.929388] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.934631] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.943400] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.943422] musb-hdrc: MHDRC RTL version 2.0
[    2.943437] musb-hdrc: setup fifo_mode 4
[    2.943465] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.943615] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.948659] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.954680] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.959932] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.968702] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.968723] musb-hdrc: MHDRC RTL version 2.0
[    2.968737] musb-hdrc: setup fifo_mode 4
[    2.968759] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.968898] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.973940] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.979249] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.985622] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    2.993867] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    2.993971] usb usb1: default language 0x0409
[    2.994029] usb usb1: udev 1, busnum 1, minor = 0
[    2.994053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.001204] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.008776] usb usb1: Product: MUSB HDRC host driver
[    3.013989] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.019653] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.025857] usb usb1: usb_probe_device
[    3.025887] usb usb1: configuration #1 chosen from 1 choice
[    3.025954] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.026216] hub 1-0:1.0: usb_probe_interface
[    3.026239] hub 1-0:1.0: usb_probe_interface - got id
[    3.026267] hub 1-0:1.0: USB hub found
[    3.030260] hub 1-0:1.0: 1 port detected
[    3.034399] hub 1-0:1.0: standalone hub
[    3.034419] hub 1-0:1.0: individual port power switching
[    3.034437] hub 1-0:1.0: no over-current protection
[    3.034454] hub 1-0:1.0: Single TT
[    3.034475] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.034495] hub 1-0:1.0: power on to power good time: 10ms
[    3.034552] hub 1-0:1.0: local power source is good
[    3.034665] hub 1-0:1.0: enabling power on all ports
[    3.035726] mousedev: PS/2 mouse device common for all mice
[    3.043660] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.051167] 44e3e000.rtc: already running
[    3.055665] i2c /dev entries driver
[    3.060662] pps_ldisc: PPS line discipline registered
[    3.066149] Driver for 1-wire Dallas network protocol.
[    3.073407] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.081000] cpuidle: using governor ladder
[    3.085326] cpuidle: using governor menu
[    3.089899] of_get_named_gpio_flags exited with status 6
[    3.089919] of_get_named_gpio_flags: can't parse gpios property
[    3.089935] of_get_named_gpio_flags: can't parse gpios property
[    3.089971] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.097199] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.104010] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.111233] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.118552] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.125503] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.135517] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.159428] of_get_named_gpio_flags exited with status -517
[    3.159495] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.167273] ledtrig-cpu: registered to indicate activity on CPUs
[    3.174056] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.181252] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.189406] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.195700] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.202885] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.215133] usbcore: registered new interface driver usbhid
[    3.221051] usbhid: USB HID core driver
[    3.227956] TCP: cubic registered
[    3.231482] Initializing XFRM netlink socket
[    3.236051] NET: Registered protocol family 17
[    3.240943] NET: Registered protocol family 15
[    3.245836] Key type dns_resolver registered
[    3.250470] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.258549] ThumbEE CPU extension supported.
[    3.263060] Registering SWP/SWPB emulation handler
[    3.269069] registered taskstats version 1
[    3.275687] of_get_named_gpio_flags exited with status -517
[    3.275761] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.332715] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.339126] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.353664] libphy: 4a101000.mdio: probed
[    3.357982] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.368218] Detected MACID = c4:f3:12:cf:36:4e
[    3.372894] cpsw 4a100000.ethernet: NAPI disabled
[    3.378279] of_get_named_gpio_flags exited with status -517
[    3.378344] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.387076] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.396360] cpu0 supply cpu0 not found, using dummy regulator
[    3.402843] cpufreq_cpu0: failed to scale voltage up: -22
[    3.408658] cpufreq_cpu0: failed to scale voltage up: -22
[    3.421419] ALSA device list:
[    3.424651]   No soundcards found.
[    3.429215] Freeing init memory: 264K
[    3.433261] Failed to execute /init
[    4.440530] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.762024] net eth0: initializing cpsw version 1.12 (0)
[    5.770972] net eth0: phy found : id is : 0x7c0f1
[    5.776426] libphy: PHY 4a101000.mdio:01 not found
[    5.781623] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    9.919142] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
May  2 14:41:17 (none) local0.err cgminer: Miner compile time: Fri Dec 29 17:12:57 CST 2017 type: Antminer A3
May  2 14:41:17 (none) local0.warn cgminer: Started cgminer 4.9.0
May  2 14:41:17 (none) local0.warn cgminer[376]: bitmain_sia_init
May  2 14:41:18 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:18 (none) local0.err cgminer[376]: FAN2 too slow ...
May  2 14:41:18 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:18 (none) local0.err cgminer[376]: FAN2 too slow ...
May  2 14:41:19 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:19 (none) local0.err cgminer[376]: FAN2 too slow ...
May  2 14:41:19 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:19 (none) local0.err cgminer[376]: FAN2 too slow ...
May  2 14:41:20 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:20 (none) local0.err cgminer[376]: FAN2 too slow ...
May  2 14:41:20 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:21 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:21 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:22 (none) local0.err cgminer[376]: FAN1 too slow ...
May  2 14:41:22 (none) local0.warn cgminer[376]: check_fan_speed OK
May  2 14:41:22 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio51/value  chain 0
May  2 14:41:22 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio48/value  chain 1
May  2 14:41:22 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio47/value  chain 2
May  2 14:41:22 (none) local0.notice cgminer[376]: detect total chain num 3
May  2 14:41:22 (none) local0.notice cgminer[376]: i2c init ok
May  2 14:41:22 (none) local0.notice cgminer[376]: check_whether_need_update_pic_program
May  2 14:41:23 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
May  2 14:41:24 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
May  2 14:41:24 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
May  2 14:41:25 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
May  2 14:41:26 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
May  2 14:41:26 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
May  2 14:41:27 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
May  2 14:41:28 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
May  2 14:41:28 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
May  2 14:41:28 (none) local0.notice cgminer[376]: every_chain_reset_PIC16F1704_pic_new
May  2 14:41:30 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
May  2 14:41:31 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
May  2 14:41:32 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
May  2 14:41:33 (none) local0.notice cgminer[376]: every_chain_jump_from_loader_to_app_PIC16F1704_new
May  2 14:41:33 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
May  2 14:41:34 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
May  2 14:41:34 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
May  2 14:41:35 (none) local0.notice cgminer[376]: reset_hash_board_low 0
May  2 14:41:35 (none) local0.notice cgminer[376]: pic_heart_beat_func_new
May  2 14:41:35 (none) local0.notice cgminer[376]: reset_hash_board_low 1
May  2 14:41:35 (none) local0.notice cgminer[376]: reset_hash_board_low 2
May  2 14:41:35 (none) local0.notice cgminer[376]: reset_hash_board_low 3
May  2 14:41:35 (none) local0.notice cgminer[376]: every_chain_enable_PIC16F1704_dc_dc_new
May  2 14:41:35 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
May  2 14:41:35 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
May  2 14:41:35 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
May  2 14:41:36 (none) local0.notice cgminer[376]: reset_hash_board_high 0
May  2 14:41:36 (none) local0.notice cgminer[376]: reset_hash_board_high 1
May  2 14:41:36 (none) local0.notice cgminer[376]: reset_hash_board_high 2
May  2 14:41:36 (none) local0.notice cgminer[376]: reset_hash_board_high 3
May  2 14:41:36 (none) local0.notice cgminer[376]: tty_init
May  2 14:41:36 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:41:36 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
May  2 14:41:36 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
May  2 14:41:36 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
May  2 14:41:37 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
May  2 14:41:37 (none) local0.notice cgminer[376]: open device over
May  2 14:41:37 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:41:37 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
May  2 14:41:37 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
May  2 14:41:37 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
May  2 14:41:37 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
May  2 14:41:37 (none) local0.notice cgminer[376]: open device over
May  2 14:41:37 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:41:37 (none) local0.notice cgminer[376]: tty_init_chain chainid = 2
May  2 14:41:37 (none) local0.err cgminer[376]: create rx read thread for chain 2 ok
May  2 14:41:37 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[2]
May  2 14:41:37 (none) local0.err cgminer[376]: create tx read thread for chain 2 ok
May  2 14:41:37 (none) local0.notice cgminer[376]: open device over
May  2 14:41:37 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:41:37 (none) local0.notice cgminer[376]: open device over
May  2 14:41:37 (none) local0.notice cgminer[376]: check_every_chain_asic_number
May  2 14:41:38 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 60 ASICs
May  2 14:41:38 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 0 ASICs
May  2 14:41:38 (none) local0.warn cgminer[376]: check_asic_reg: Chain2 has 60 ASICs
May  2 14:41:39 (none) local0.notice cgminer[376]: reset_hash_board_low 1
May  2 14:41:39 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
May  2 14:41:40 (none) local0.notice cgminer[376]: reset_hash_board_high 1
May  2 14:41:40 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:41:40 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
May  2 14:41:40 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
May  2 14:41:40 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
May  2 14:41:40 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
May  2 14:41:40 (none) local0.notice cgminer[376]: open device over
May  2 14:41:41 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 0 ASICs
May  2 14:41:41 (none) local0.notice cgminer[376]: recheck_asic_num DONE!
May  2 14:41:41 (none) local0.notice cgminer[376]: reset_hash_board_low 1
May  2 14:41:41 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
May  2 14:41:42 (none) local0.notice cgminer[376]: reset_hash_board_high 1
May  2 14:41:42 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:41:42 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
May  2 14:41:42 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
May  2 14:41:42 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
May  2 14:41:42 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
May  2 14:41:42 (none) local0.notice cgminer[376]: open device over
May  2 14:41:43 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 0 ASICs
May  2 14:41:43 (none) local0.notice cgminer[376]: recheck_asic_num DONE!
May  2 14:41:43 (none) local0.notice cgminer[376]: reset_hash_board_low 1
May  2 14:41:43 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
May  2 14:41:44 (none) local0.notice cgminer[376]: reset_hash_board_high 1
May  2 14:41:44 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:41:44 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
May  2 14:41:44 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
May  2 14:41:44 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
May  2 14:41:44 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
May  2 14:41:44 (none) local0.notice cgminer[376]: open device over
May  2 14:41:45 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 0 ASICs
May  2 14:41:45 (none) local0.notice cgminer[376]: recheck_asic_num DONE!
May  2 14:41:45 (none) local0.notice cgminer[376]: calculate_address_interval: temp_asic_number = 64, addrInterval = 4
May  2 14:41:45 (none) local0.notice cgminer[376]: set_ticket_mask ticket_mask = 0x00000020
May  2 14:41:45 (none) local0.notice cgminer[376]: set_frequency: frequency = 594
May  2 14:41:45 (none) local0.notice cgminer[376]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
May  2 14:41:45 (none) local0.notice cgminer[376]: Now Set [0] Chain Address
May  2 14:41:46 (none) local0.notice cgminer[376]: software_set_address_chain: chain 1 has 0 ASIC, and addrInterval is 4
May  2 14:41:46 (none) local0.notice cgminer[376]: Now Set [1] Chain Address
May  2 14:41:47 (none) local0.notice cgminer[376]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
May  2 14:41:47 (none) local0.notice cgminer[376]: Now Set [2] Chain Address
May  2 14:41:47 (none) local0.notice cgminer[376]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 4
May  2 14:41:47 (none) local0.notice cgminer[376]: check_every_chain_asic_number
May  2 14:41:48 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 60 ASICs
May  2 14:41:48 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 0 ASICs
May  2 14:41:48 (none) local0.warn cgminer[376]: check_asic_reg: Chain2 has 60 ASICs
May  2 14:41:48 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
May  2 14:41:48 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
May  2 14:41:48 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
May  2 14:41:48 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
May  2 14:41:48 (none) local0.notice cgminer[376]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
May  2 14:41:48 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
May  2 14:41:48 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
May  2 14:41:48 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
May  2 14:41:48 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
May  2 14:41:48 (none) local0.notice cgminer[376]: 0 calibration_sensor_offset_chain
May  2 14:41:49 (none) local0.notice cgminer[376]: chain:0 local:42 remote:42
May  2 14:41:49 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
May  2 14:41:49 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
May  2 14:41:49 (none) local0.notice cgminer[376]: 1 calibration_sensor_offset_chain
May  2 14:41:50 (none) local0.notice cgminer[376]: chain:1 local:0 remote:0
May  2 14:41:50 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
May  2 14:41:50 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,
May  2 14:41:50 (none) local0.notice cgminer[376]: 2 calibration_sensor_offset_chain
May  2 14:41:51 (none) local0.notice cgminer[376]: chain:2 local:42 remote:42
May  2 14:41:51 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
May  2 14:41:51 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
May  2 14:41:51 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain
May  2 14:41:51 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
May  2 14:41:51 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
May  2 14:41:51 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain
May  2 14:41:51 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
May  2 14:41:52 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,
May  2 14:41:52 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain
May  2 14:41:52 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
May  2 14:41:52 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
May  2 14:41:52 (none) local0.notice cgminer[376]: frequency = '594'
May  2 14:41:52 (none) local0.notice cgminer[376]: dev.timeout = 8599 us
May  2 14:41:57 (none) local0.err cgminer[376]: cgminer time error total_secs = 1525272117.661899 last_total_secs = 1.000000
May  2 14:42:10 (none) local0.warn cgminer[376]: API running in IP access mode on port 4028 (16)
May  2 14:43:58 (none) local0.notice cgminer[376]: chain 1 reinit 0.00
May  2 14:43:58 (none) local0.notice cgminer[376]: reset_hash_board_low 1
May  2 14:43:59 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
May  2 14:44:00 (none) local0.notice cgminer[376]: reset_hash_board_high 1
May  2 14:44:00 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:44:00 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
May  2 14:44:00 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
May  2 14:44:00 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
May  2 14:44:00 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
May  2 14:44:00 (none) local0.notice cgminer[376]: open device over
May  2 14:44:00 (none) local0.notice cgminer[376]: software_set_address_chain: chain 1 has 0 ASIC, and addrInterval is 4
May  2 14:44:00 (none) local0.notice cgminer[376]: Now Set [1] Chain Address
May  2 14:44:01 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
May  2 14:44:01 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
May  2 14:44:01 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain
May  2 14:44:01 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
May  2 14:44:01 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,
May  2 14:45:59 (none) local0.notice cgminer[376]: chain 1 reinit 0.00
May  2 14:45:59 (none) local0.notice cgminer[376]: reset_hash_board_low 1
May  2 14:46:00 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
May  2 14:46:01 (none) local0.notice cgminer[376]: reset_hash_board_high 1
May  2 14:46:01 (none) local0.notice cgminer[376]: tty_init_chain
May  2 14:46:01 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
May  2 14:46:01 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
May  2 14:46:01 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
May  2 14:46:01 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
May  2 14:46:01 (none) local0.notice cgminer[376]: open device over
May  2 14:46:01 (none) local0.notice cgminer[376]: software_set_address_chain: chain 1 has 0 ASIC, and addrInterval is 4
May  2 14:46:01 (none) local0.notice cgminer[376]: Now Set [1] Chain Address
May  2 14:46:02 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
May  2 14:46:02 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
May  2 14:46:02 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain
May  2 14:46:02 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
May  2 14:46:03 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,

 

Подскажите, что с ней? и что делать?

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
Гость
Эта тема закрыта для публикации сообщений.

  • Сейчас на странице   0 пользователей

    Нет пользователей, просматривающих эту страницу.

×