Перейти к содержанию

Ubuntu 13.10 - Черный экран < 2 GPU


ga6iem

Рекомендуемые сообщения

HW:

R9-280X (GV-R928XOC-3GD-GA (rev. 2.0)) - 4шт.

MB ASROCK H81 Pro BTC

БП: 1500ватт

DDR3 - 4гб

В BIOS - GEN1

 

ПО:

Ubuntu 13.10 (minimal)

Linux_AMD_Catalyst_14.3_Beta_V1.0_B22_March12_2014

build-essential cdbs dh-make dkms execstack dh-modaliases linux-headers-generic fakeroot libqtgui4 lib32gcc1 mc xorg rxvt-unicode xfonts-terminus slim rcconf hddtemp hardinfo htop screen lm-sensors autoconf automake libtool libcurl3-dev libudev-dev libcurl4-openssl-dev libncurses5-dev pkg-config yasm git tcl tcllib tcl-tls php5 php5-cli

 

Проблема:

После установки каталиста при запуске иксов - черный экран, клавиатура/мышь висят, однако по SSH зайти на комп могу, cgminer запустить ноже, но и он сразу виснет, ситуация повторяется раз 10, на 11 иксы всте-ки поднимаются, майнинг идет. После выключения та же история. Уже менял и мать и память и БП, в общем все перепробовал. Проблема возникает именно после установки больше 2х видеокарт.

На сборках BAMP/SMOS проблем нет! Кто сталкивался с подобным?

 

Вот сейчас сижу по SSH при висящих иксах, в логах вроде все нормально, на мониторе черный квадрат

 

 

cat ./dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-18-generic (buildd@toyol) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #32-Ubuntu SMP Tue Feb 18 21:11:14 UTC 2014 (Ubuntu 3.11.0-18.32-generic 3.11.10.4)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=8674ab0f-7c95-4aca-9a3a-7d0d5b9c373c ro config persistent splash vga=0x317 vmalloc=256M quiet vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000690bdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000690be000-0x00000000690c4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000690c5000-0x0000000069815fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000069816000-0x0000000069a51fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000069a52000-0x000000007c5adfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c5ae000-0x000000007c635fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c636000-0x000000007c672fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c673000-0x000000007c717fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c718000-0x000000007cffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007cfff000-0x000000007cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H81 Pro BTC, BIOS P1.50 02/14/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x7d000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7FC0000000 write-back
[    0.000000]   1 base 0040000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0060000000 mask 7FF0000000 write-back
[    0.000000]   3 base 0070000000 mask 7FF8000000 write-back
[    0.000000]   4 base 0078000000 mask 7FFC000000 write-back
[    0.000000]   5 base 007C000000 mask 7FFC000000 write-back
[    0.000000]   6 base 007F000000 mask 7FFF000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1GB, range: 512MB, type WB
[    0.000000] reg 2, base: 1536MB, range: 256MB, type WB
[    0.000000] reg 3, base: 1792MB, range: 128MB, type WB
[    0.000000] reg 4, base: 1920MB, range: 64MB, type WB
[    0.000000] reg 5, base: 1984MB, range: 64MB, type WB
[    0.000000] reg 6, base: 2032MB, range: 16MB, type UC
[    0.000000] total RAM covered: 2032M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 32M         num_reg: 2      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2032MB, range: 16MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffff8800000fd800]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c200000-0x7c3fffff]
[    0.000000]  [mem 0x7c200000-0x7c3fffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c000000-0x7c1fffff]
[    0.000000]  [mem 0x7c000000-0x7c1fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x78000000-0x7bffffff]
[    0.000000]  [mem 0x78000000-0x7bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x690bdfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x68ffffff] page 2M
[    0.000000]  [mem 0x69000000-0x690bdfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x690c5000-0x69815fff]
[    0.000000]  [mem 0x690c5000-0x691fffff] page 4k
[    0.000000]  [mem 0x69200000-0x697fffff] page 2M
[    0.000000]  [mem 0x69800000-0x69815fff] page 4k
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x69a52000-0x77ffffff]
[    0.000000]  [mem 0x69a52000-0x69bfffff] page 4k
[    0.000000]  [mem 0x69c00000-0x77ffffff] page 2M
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c400000-0x7c5adfff]
[    0.000000]  [mem 0x7c400000-0x7c5adfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7c636000-0x7c672fff]
[    0.000000]  [mem 0x7c636000-0x7c672fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7cfff000-0x7cffffff]
[    0.000000]  [mem 0x7cfff000-0x7cffffff] page 4k
[    0.000000] RAMDISK: [mem 0x35eb0000-0x36f4ffff]
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 000000007c6f5078 00074 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 000000007c6ff5b8 0010C (v05 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 000000007c6f5188 0A430 (v02 ALASKA    A M I 00000150 INTL 20091112)
[    0.000000] ACPI: FACS 000000007c716080 00040
[    0.000000] ACPI: APIC 000000007c6ff6c8 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 000000007c6ff730 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 000000007c6ff778 00539 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000007c6ffcb8 00AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 000000007c700790 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 000000007c7007d0 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 000000007c700808 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 000000007c700b78 03493 (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
[    0.000000] ACPI: AAFT 000000007c704010 002BB (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7cffffff]
[    0.000000]   NODE_DATA [mem 0x7c66d000-0x7c671fff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880079a00000-ffff88007b9fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x690bdfff]
[    0.000000]   node   0: [mem 0x690c5000-0x69815fff]
[    0.000000]   node   0: [mem 0x69a52000-0x7c5adfff]
[    0.000000]   node   0: [mem 0x7c636000-0x7c672fff]
[    0.000000]   node   0: [mem 0x7cfff000-0x7cffffff]
[    0.000000] On node 0 totalpages: 508741
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7936 pages used for memmap
[    0.000000]   DMA32 zone: 504745 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x690be000-0x690c4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x69816000-0x69a51fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c5ae000-0x7c635fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c673000-0x7c717fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c718000-0x7cffefff]
[    0.000000] e820: [mem 0x7d000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007c000000 s86720 r8192 d23872 u1048576
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 500720
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=8674ab0f-7c95-4aca-9a3a-7d0d5b9c373c ro config persistent splash vga=0x317 vmalloc=256M quiet vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1968348K/2034964K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1364K init, 1420K bss, 66616K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2999.327 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.65 BogoMIPS (lpj=11997308)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000020] Security Framework initialized
[    0.000033] AppArmor: AppArmor initialized
[    0.000034] Yama: becoming mindful.
[    0.000145] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000645] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000875] Mount-cache hash table entries: 256
[    0.001005] Initializing cgroup subsys memory
[    0.001012] Initializing cgroup subsys devices
[    0.001014] Initializing cgroup subsys freezer
[    0.001015] Initializing cgroup subsys blkio
[    0.001016] Initializing cgroup subsys perf_event
[    0.001018] Initializing cgroup subsys hugetlb
[    0.001034] CPU: Physical Processor ID: 0
[    0.001035] CPU: Processor Core ID: 0
[    0.001818] mce: CPU supports 7 MCE banks
[    0.001827] CPU0: Thermal monitoring enabled (TM1)
[    0.001835] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.001835] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.001835] tlb_flushall_shift: 6
[    0.001924] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.003338] ACPI: Core revision 20130517
[    0.008441] ACPI: All ACPI Tables successfully acquired
[    0.008632] ftrace: allocating 27858 entries in 109 pages
[    0.018138] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057775] smpboot: CPU0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (fam: 06, model: 3c, stepping: 03)
[    0.057781] TSC deadline timer enabled
[    0.057788] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.057794] ... version:                3
[    0.057794] ... bit width:              48
[    0.057795] ... generic registers:      8
[    0.057796] ... value mask:             0000ffffffffffff
[    0.057797] ... max period:             0000ffffffffffff
[    0.057797] ... fixed-purpose events:   3
[    0.057798] ... event mask:             00000007000000ff
[    0.058812] smpboot: Booting Node   0, Processors  #1 OK
[    0.072735] Brought up 2 CPUs
[    0.072738] smpboot: Total of 2 processors activated (11997.30 BogoMIPS)
[    0.072797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.074162] devtmpfs: initialized
[    0.074690] EVM: security.selinux
[    0.074691] EVM: security.SMACK64
[    0.074691] EVM: security.capability
[    0.074731] PM: Registering ACPI NVS region [mem 0x690be000-0x690c4fff] (28672 bytes)
[    0.074732] PM: Registering ACPI NVS region [mem 0x7c673000-0x7c717fff] (675840 bytes)
[    0.075262] regulator-dummy: no parameters
[    0.075287] RTC time: 19:55:41, date: 03/28/14
[    0.075308] NET: Registered protocol family 16
[    0.075404] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.075405] ACPI: bus type PCI registered
[    0.075407] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.075439] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.075441] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.079749] PCI: Using configuration type 1 for base access
[    0.080239] bio: create slab <bio-0> at 0
[    0.080328] ACPI: Added _OSI(Module Device)
[    0.080329] ACPI: Added _OSI(Processor Device)
[    0.080330] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.080331] ACPI: Added _OSI(Processor Aggregator Device)
[    0.081556] ACPI: EC: Look up EC in DSDT
[    0.082988] ACPI: Executed 1 blocks of module-level executable AML code
[    0.084586] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.086106] ACPI: SSDT 000000007c62bc18 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.086418] ACPI: Dynamic OEM Table Load:
[    0.086419] ACPI: SSDT           (null) 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.090199] ACPI: SSDT 000000007c62b618 005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.090562] ACPI: Dynamic OEM Table Load:
[    0.090564] ACPI: SSDT           (null) 005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.094114] ACPI: SSDT 000000007c62ad98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.094422] ACPI: Dynamic OEM Table Load:
[    0.094423] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.098308] ACPI: Interpreter enabled
[    0.098313] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.098317] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.098328] ACPI: (supports S0 S3 S4 S5)
[    0.098329] ACPI: Using IOAPIC for interrupt routing
[    0.098368] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.098465] ACPI: No dock devices found.
[    0.104613] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.104756] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.104897] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[    0.105227] PCI host bridge to bus 0000:00
[    0.105229] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.105230] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.105231] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.105232] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.105233] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.105234] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.105235] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.105236] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.105237] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.105239] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.105240] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfeafffff]
[    0.105247] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.105310] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.105335] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.105400] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.105417] pci 0000:00:14.0: reg 0x10: [mem 0x90100000-0x9010ffff 64bit]
[    0.105469] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.105502] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.105523] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.105540] pci 0000:00:16.0: reg 0x10: [mem 0x90116000-0x9011600f 64bit]
[    0.105596] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.105656] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.105674] pci 0000:00:1a.0: reg 0x10: [mem 0x90114000-0x901143ff]
[    0.105753] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.105796] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.105816] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.105873] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.105908] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.105927] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.105984] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.106018] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.106037] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.106097] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.106132] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.106153] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[    0.106209] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.106244] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.106262] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.106319] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.106354] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.106380] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.106398] pci 0000:00:1d.0: reg 0x10: [mem 0x90113000-0x901133ff]
[    0.106477] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.106519] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.106543] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.106682] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.106695] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.106701] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.106707] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.106713] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.106719] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.106725] pci 0000:00:1f.2: reg 0x24: [mem 0x90112000-0x901127ff]
[    0.106758] pci 0000:00:1f.2: PME# supported from D3hot
[    0.106803] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.106815] pci 0000:00:1f.3: reg 0x10: [mem 0x90111000-0x901110ff 64bit]
[    0.106832] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.106910] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.106964] pci 0000:02:00.0: [1002:6798] type 00 class 0x030000
[    0.106981] pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.106995] pci 0000:02:00.0: reg 0x18: [mem 0xf0000000-0xf003ffff 64bit]
[    0.107004] pci 0000:02:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.107021] pci 0000:02:00.0: reg 0x30: [mem 0xf0040000-0xf005ffff pref]
[    0.107075] pci 0000:02:00.0: supports D1 D2
[    0.107076] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[    0.107123] pci 0000:02:00.1: [1002:aaa0] type 00 class 0x040300
[    0.107140] pci 0000:02:00.1: reg 0x10: [mem 0xf0060000-0xf0063fff 64bit]
[    0.107232] pci 0000:02:00.1: supports D1 D2
[    0.114097] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.114100] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.114103] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xf00fffff]
[    0.114158] pci 0000:03:00.0: [1002:6798] type 00 class 0x030000
[    0.114175] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.114189] pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd003ffff 64bit]
[    0.114198] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.114215] pci 0000:03:00.0: reg 0x30: [mem 0xd0040000-0xd005ffff pref]
[    0.114268] pci 0000:03:00.0: supports D1 D2
[    0.114269] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.114317] pci 0000:03:00.1: [1002:aaa0] type 00 class 0x040300
[    0.114333] pci 0000:03:00.1: reg 0x10: [mem 0xd0060000-0xd0063fff 64bit]
[    0.114426] pci 0000:03:00.1: supports D1 D2
[    0.122093] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.122096] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.122098] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xd00fffff]
[    0.122153] pci 0000:04:00.0: [1002:6798] type 00 class 0x030000
[    0.122170] pci 0000:04:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.122184] pci 0000:04:00.0: reg 0x18: [mem 0xb0000000-0xb003ffff 64bit]
[    0.122193] pci 0000:04:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.122210] pci 0000:04:00.0: reg 0x30: [mem 0xb0040000-0xb005ffff pref]
[    0.122263] pci 0000:04:00.0: supports D1 D2
[    0.122264] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.122310] pci 0000:04:00.1: [1002:aaa0] type 00 class 0x040300
[    0.122327] pci 0000:04:00.1: reg 0x10: [mem 0xb0060000-0xb0063fff 64bit]
[    0.122420] pci 0000:04:00.1: supports D1 D2
[    0.130090] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.130093] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.130096] pci 0000:00:1c.3:   bridge window [mem 0xa0000000-0xb00fffff]
[    0.130150] pci 0000:05:00.0: [1002:6798] type 00 class 0x030000
[    0.130167] pci 0000:05:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.130181] pci 0000:05:00.0: reg 0x18: [mem 0x90000000-0x9003ffff 64bit]
[    0.130190] pci 0000:05:00.0: reg 0x20: [io  0xb000-0xb0ff]
[    0.130207] pci 0000:05:00.0: reg 0x30: [mem 0x90040000-0x9005ffff pref]
[    0.130260] pci 0000:05:00.0: supports D1 D2
[    0.130261] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[    0.130308] pci 0000:05:00.1: [1002:aaa0] type 00 class 0x040300
[    0.130325] pci 0000:05:00.1: reg 0x10: [mem 0x90060000-0x90063fff 64bit]
[    0.130417] pci 0000:05:00.1: supports D1 D2
[    0.138087] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.138090] pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
[    0.138093] pci 0000:00:1c.4:   bridge window [mem 0x80000000-0x900fffff]
[    0.138151] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    0.138166] pci 0000:06:00.0: reg 0x10: [io  0xa000-0xa0ff]
[    0.138192] pci 0000:06:00.0: reg 0x18: [mem 0xf0204000-0xf0204fff 64bit]
[    0.138209] pci 0000:06:00.0: reg 0x20: [mem 0xf0200000-0xf0203fff 64bit pref]
[    0.138279] pci 0000:06:00.0: supports D1 D2
[    0.138280] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.146085] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.146087] pci 0000:00:1c.5:   bridge window [io  0xa000-0xafff]
[    0.146090] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.146112] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.146696] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.146730] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.146761] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.146793] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.146824] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146887] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146918] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.147172] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.147177] ACPI: \_SB_.PCI0: notify handler is installed
[    0.147220] Found 1 acpi root devices
[    0.147281] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.147285] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
[    0.147288] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
[    0.147290] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
[    0.147291] vgaarb: loaded
[    0.147292] vgaarb: bridge control possible 0000:05:00.0
[    0.147293] vgaarb: bridge control possible 0000:04:00.0
[    0.147293] vgaarb: bridge control possible 0000:03:00.0
[    0.147294] vgaarb: bridge control possible 0000:02:00.0
[    0.147391] SCSI subsystem initialized
[    0.147392] ACPI: bus type ATA registered
[    0.147416] libata version 3.00 loaded.
[    0.147425] ACPI: bus type USB registered
[    0.147435] usbcore: registered new interface driver usbfs
[    0.147440] usbcore: registered new interface driver hub
[    0.147455] usbcore: registered new device driver usb
[    0.147516] PCI: Using ACPI for IRQ routing
[    0.148718] PCI: pci_cache_line_size set to 64 bytes
[    0.148768] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.148769] e820: reserve RAM buffer [mem 0x690be000-0x6bffffff]
[    0.148770] e820: reserve RAM buffer [mem 0x69816000-0x6bffffff]
[    0.148771] e820: reserve RAM buffer [mem 0x7c5ae000-0x7fffffff]
[    0.148772] e820: reserve RAM buffer [mem 0x7c673000-0x7fffffff]
[    0.148773] e820: reserve RAM buffer [mem 0x7d000000-0x7fffffff]
[    0.148825] NetLabel: Initializing
[    0.148826] NetLabel:  domain hash size = 128
[    0.148826] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.148832] NetLabel:  unlabeled traffic allowed by default
[    0.148875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.148879] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.150893] Switched to clocksource hpet
[    0.153955] AppArmor: AppArmor Filesystem Enabled
[    0.153976] pnp: PnP ACPI init
[    0.153985] ACPI: bus type PNP registered
[    0.154057] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.154060] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.154070] pnp 00:01: [dma 4]
[    0.154078] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.154090] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.154156] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.154231] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.154232] system 00:04: [io  0xffff] has been reserved
[    0.154233] system 00:04: [io  0xffff] has been reserved
[    0.154235] system 00:04: [io  0xffff] has been reserved
[    0.154236] system 00:04: [io  0x1c00-0x1cfe] has been reserved
[    0.154237] system 00:04: [io  0x1d00-0x1dfe] has been reserved
[    0.154238] system 00:04: [io  0x1e00-0x1efe] has been reserved
[    0.154239] system 00:04: [io  0x1f00-0x1ffe] has been reserved
[    0.154241] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.154242] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.154243] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154262] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.154289] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.154291] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.154337] system 00:07: [io  0x0290-0x029f] has been reserved
[    0.154338] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154527] pnp 00:08: [dma 3]
[    0.154589] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.154618] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.154619] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154633] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.155010] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.155012] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.155013] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.155014] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.155015] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.155017] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.155018] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.155019] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.155020] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.155022] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.155023] system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
[    0.155024] system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    0.155026] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155197] pnp: PnP ACPI: found 12 devices
[    0.155198] ACPI: bus type PNP unregistered
[    0.160841] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.160847] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.160849] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.160853] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xf00fffff]
[    0.160859] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.160861] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.160865] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xd00fffff]
[    0.160871] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.160872] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.160876] pci 0000:00:1c.3:   bridge window [mem 0xa0000000-0xb00fffff]
[    0.160882] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.160884] pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
[    0.160887] pci 0000:00:1c.4:   bridge window [mem 0x80000000-0x900fffff]
[    0.160893] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.160895] pci 0000:00:1c.5:   bridge window [io  0xa000-0xafff]
[    0.160899] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.161145] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.161146] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.161147] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.161148] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.161149] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.161150] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.161151] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.161152] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.161153] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.161154] pci_bus 0000:00: resource 13 [mem 0x7f000000-0xfeafffff]
[    0.161156] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.161157] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xf00fffff]
[    0.161158] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.161159] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xd00fffff]
[    0.161160] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.161161] pci_bus 0000:04: resource 1 [mem 0xa0000000-0xb00fffff]
[    0.161162] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
[    0.161163] pci_bus 0000:05: resource 1 [mem 0x80000000-0x900fffff]
[    0.161164] pci_bus 0000:06: resource 0 [io  0xa000-0xafff]
[    0.161165] pci_bus 0000:06: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.161187] NET: Registered protocol family 2
[    0.161289] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.161351] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.161402] TCP: Hash tables configured (established 16384 bind 16384)
[    0.161418] TCP: reno registered
[    0.161421] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.161430] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.161465] NET: Registered protocol family 1
[    0.198905] pci 0000:02:00.0: Boot video device
[    0.198924] PCI: CLS 64 bytes, default 64
[    0.198954] Trying to unpack rootfs image as initramfs...
[    0.398916] Freeing initrd memory: 17024K (ffff880035eb0000 - ffff880036f50000)
[    0.399017] Scanning for low memory corruption every 60 seconds
[    0.399186] Initialise module verification
[    0.399215] audit: initializing netlink socket (disabled)
[    0.399223] type=2000 audit(1396036541.400:1): initialized
[    0.418162] bounce pool size: 64 pages
[    0.418168] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.418822] zbud: loaded
[    0.418912] VFS: Disk quotas dquot_6.5.2
[    0.418936] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.419205] fuse init (API version 7.22)
[    0.419254] msgmni has been set to 3877
[    0.419516] Key type asymmetric registered
[    0.419517] Asymmetric key parser 'x509' registered
[    0.419535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.419553] io scheduler noop registered
[    0.419554] io scheduler deadline registered (default)
[    0.419567] io scheduler cfq registered
[    0.419632] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.419804] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.419812] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.419845] intel_idle: MWAIT substates: 0x2120
[    0.419846] intel_idle: v0.4 model 0x3C
[    0.419846] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.419908] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.419911] ACPI: Power Button [PWRB]
[    0.419932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.419934] ACPI: Power Button [PWRF]
[    0.420003] ACPI: Requesting acpi_cpufreq
[    0.420147] GHES: HEST is not enabled!
[    0.420185] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.420809] Linux agpgart interface v0.103
[    0.421476] brd: module loaded
[    0.421811] loop: module loaded
[    0.421990] libphy: Fixed MDIO Bus: probed
[    0.422034] tun: Universal TUN/TAP device driver, 1.6
[    0.422035] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.422056] PPP generic driver version 2.4.2
[    0.422078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.422079] ehci-pci: EHCI PCI platform driver
[    0.422143] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.422149] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.422152] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.422163] ehci-pci 0000:00:1a.0: debug port 2
[    0.426044] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.426056] ehci-pci 0000:00:1a.0: irq 16, io mem 0x90114000
[    0.434542] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.434560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.434561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.434562] usb usb1: Product: EHCI Host Controller
[    0.434563] usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[    0.434564] usb usb1: SerialNumber: 0000:00:1a.0
[    0.434620] hub 1-0:1.0: USB hub found
[    0.434623] hub 1-0:1.0: 2 ports detected
[    0.434736] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.434740] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.434743] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.434752] ehci-pci 0000:00:1d.0: debug port 2
[    0.438632] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.438641] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90113000
[    0.450522] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.450535] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.450536] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.450537] usb usb2: Product: EHCI Host Controller
[    0.450538] usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[    0.450539] usb usb2: SerialNumber: 0000:00:1d.0
[    0.450583] hub 2-0:1.0: USB hub found
[    0.450585] hub 2-0:1.0: 2 ports detected
[    0.450640] ehci-platform: EHCI generic platform driver
[    0.450644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.450645] ohci-pci: OHCI PCI platform driver
[    0.450650] ohci-platform: OHCI generic platform driver
[    0.450653] uhci_hcd: USB Universal Host Controller Interface driver
[    0.450716] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.450718] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.450721] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.450794] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.450807] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.450837] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.450839] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.450840] usb usb3: Product: xHCI Host Controller
[    0.450841] usb usb3: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
[    0.450842] usb usb3: SerialNumber: 0000:00:14.0
[    0.450878] xHCI xhci_add_endpoint called for root hub
[    0.450879] xHCI xhci_check_bandwidth called for root hub
[    0.450890] hub 3-0:1.0: USB hub found
[    0.450898] hub 3-0:1.0: 10 ports detected
[    0.451998] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.452000] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.452012] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.452013] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.452014] usb usb4: Product: xHCI Host Controller
[    0.452015] usb usb4: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
[    0.452016] usb usb4: SerialNumber: 0000:00:14.0
[    0.452051] xHCI xhci_add_endpoint called for root hub
[    0.452052] xHCI xhci_check_bandwidth called for root hub
[    0.452063] hub 4-0:1.0: USB hub found
[    0.452066] hub 4-0:1.0: 2 ports detected
[    0.462538] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.465311] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.465314] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.465372] mousedev: PS/2 mouse device common for all mice
[    0.465438] rtc_cmos 00:05: RTC can wake from S4
[    0.465529] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.465551] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.465586] device-mapper: uevent: version 1.0.3
[    0.465616] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.465643] cpuidle: using governor ladder
[    0.465672] cpuidle: using governor menu
[    0.465678] ledtrig-cpu: registered to indicate activity on CPUs
[    0.465731] TCP: cubic registered
[    0.465778] NET: Registered protocol family 10
[    0.465885] NET: Registered protocol family 17
[    0.465891] Key type dns_resolver registered
[    0.466012] PM: Hibernation image not present or could not be loaded.
[    0.466014] Loading module verification certificates
[    0.466596] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9d94dc8d073854d044b3fa3652786ac75597c2f5'
[    0.466603] registered taskstats version 1
[    0.467826] Key type trusted registered
[    0.468803] Key type encrypted registered
[    0.469797] AppArmor: AppArmor sha1 policy hashing enabled
[    0.470218]   Magic number: 6:991:951
[    0.470238] tty tty8: hash matches
[    0.470265] memory memory4: hash matches
[    0.470293] rtc_cmos 00:05: setting system clock to 2014-03-28 19:55:42 UTC (1396036542)
[    0.470546] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.470547] EDD information not available.
[    0.471179] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    0.471180] Write protecting the kernel read-only data: 12288k
[    0.472826] Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
[    0.473991] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
[    0.481075] systemd-udevd[100]: starting version 204
[    0.503154] ahci 0000:00:1f.2: version 3.0
[    0.503254] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.503286] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    0.503288] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[    0.503291] ahci 0000:00:1f.2: setting latency timer to 64
[    0.505513] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.505519] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.505799] scsi0 : ahci
[    0.505853] scsi1 : ahci
[    0.507387] scsi2 : ahci
[    0.507531] scsi3 : ahci
[    0.507582] ata1: SATA max UDMA/133 abar m2048@0x90112000 port 0x90112100 irq 42
[    0.507584] ata2: DUMMY
[    0.507584] ata3: DUMMY
[    0.507585] ata4: DUMMY
[    0.511433] r8169 0000:06:00.0: irq 43 for MSI/MSI-X
[    0.512083] r8169 0000:06:00.0 eth0: RTL8168g/8111g at 0xffffc9000032a000, d0:50:99:06:39:c5, XID 0c000800 IRQ 43
[    0.512085] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.746170] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.826082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.859711] ata1.00: ATA-8: ST250LT012-9WS141, 0001SDM1, max UDMA/133
[    0.859713] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.878424] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    0.878426] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.878665] hub 1-1:1.0: USB hub found
[    0.878781] hub 1-1:1.0: 4 ports detected
[    0.909453] ata1.00: configured for UDMA/133
[    0.909623] scsi 0:0:0:0: Direct-Access     ATA      ST250LT012-9WS14 0001 PQ: 0 ANSI: 5
[    0.909724] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.909736] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.909739] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.909770] sd 0:0:0:0: [sda] Write Protect is off
[    0.909771] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.909790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.955536]  sda: sda1 sda2 < sda5 >
[    0.955876] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.989865] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.122115] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.122117] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.122354] hub 2-1:1.0: USB hub found
[    1.122460] hub 2-1:1.0: 6 ports detected
[    1.397346] tsc: Refined TSC clocksource calibration: 2999.129 MHz
[    1.934136] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.934138] EXT4-fs (sda1): write access will be enabled during recovery
[    2.208932] EXT4-fs (sda1): recovery complete
[    2.217951] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.396104] Switched to clocksource tsc
[    8.151410] Adding 2033660k swap on /dev/sda5.  Priority:-1 extents:1 across:2033660k FS
[    8.195737] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.253509] systemd-udevd[277]: starting version 204
[    8.353174] lp: driver loaded but no devices found
[    8.410532] parport_pc 00:08: reported by Plug and Play ACPI
[    8.410584] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    8.421722] mei_me 0000:00:16.0: setting latency timer to 64
[    8.421751] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[    8.423781] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    8.423782] AMD IOMMUv2 functionality not available on this system
[    8.434355] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    8.434358] Disabling lock debugging due to kernel taint
[    8.441154] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[    8.451263] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    8.451269] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.451271] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
[    8.451273] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 2 (20130517/utaddress-251)
[    8.451275] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 3 (20130517/utaddress-251)
[    8.451277] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.451277] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
[    8.451279] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 2 (20130517/utaddress-251)
[    8.451280] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 3 (20130517/utaddress-251)
[    8.451282] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.451283] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.455322] hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
[    8.455324] hda-intel 0000:02:00.1: Using LPIB position fix
[    8.455325] hda-intel 0000:02:00.1: Force to non-snoop mode
[    8.455359] snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
[    8.467050] <6>[fglrx] Maximum main memory to use for locked dma buffers: 1817 MBytes.
[    8.467185] <6>[fglrx]   vendor: 1002 device: 6798 count: 1
[    8.467187] <6>[fglrx]   vendor: 1002 device: 6798 count: 2
[    8.467188] <6>[fglrx]   vendor: 1002 device: 6798 count: 3
[    8.467189] <6>[fglrx]   vendor: 1002 device: 6798 count: 4
[    8.467422] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[    8.467498] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[    8.467503] pci 0000:03:00.0: enabling device (0000 -> 0003)
[    8.467535] <6>[fglrx] ioport: bar 4, base 0xc000, size: 0x100
[    8.467539] pci 0000:04:00.0: enabling device (0000 -> 0003)
[    8.467567] <6>[fglrx] ioport: bar 4, base 0xb000, size: 0x100
[    8.467571] pci 0000:05:00.0: enabling device (0000 -> 0003)
[    8.467690] <6>[fglrx] Kernel PAT support is enabled
[    8.467712] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 4 minors
[    8.467748] hda-intel 0000:02:00.1: Enable sync_write for stable communication
[    8.475519] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input2
[    8.475589] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input3
[    8.475645] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input4
[    8.475692] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input5
[    8.475738] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input6
[    8.475782] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input7
[    8.476055] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[    8.476056] hda-intel 0000:03:00.1: Using LPIB position fix
[    8.476057] hda-intel 0000:03:00.1: Force to non-snoop mode
[    8.476088] snd_hda_intel 0000:03:00.1: irq 46 for MSI/MSI-X
[    8.481410] hda-intel 0000:03:00.1: Enable sync_write for stable communication
[    8.482732] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input8
[    8.482779] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input9
[    8.482810] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input10
[    8.482839] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input11
[    8.482866] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input12
[    8.482894] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input13
[    8.483088] hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
[    8.483090] hda-intel 0000:04:00.1: Using LPIB position fix
[    8.483091] hda-intel 0000:04:00.1: Force to non-snoop mode
[    8.483127] snd_hda_intel 0000:04:00.1: irq 47 for MSI/MSI-X
[    8.485468] hda-intel 0000:04:00.1: Enable sync_write for stable communication
[    8.486748] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input14
[    8.486789] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input15
[    8.486818] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input16
[    8.486846] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input17
[    8.486873] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input18
[    8.486901] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input19
[    8.487076] hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
[    8.487077] hda-intel 0000:05:00.1: Using LPIB position fix
[    8.487078] hda-intel 0000:05:00.1: Force to non-snoop mode
[    8.487106] snd_hda_intel 0000:05:00.1: irq 48 for MSI/MSI-X
[    8.489442] hda-intel 0000:05:00.1: Enable sync_write for stable communication
[    8.490724] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input20
[    8.490759] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input21
[    8.490788] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input22
[    8.490814] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input23
[    8.490842] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input24
[    8.490868] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input25
[    8.502553] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[    8.508294] lp0: using parport0 (interrupt-driven).
[    8.536773] ppdev: user-space parallel port driver
[    8.583393] type=1400 audit(1396036550.618:2): apparmor="STATUS" operation="profile_load" parent=314 profile="unconfined" name="/sbin/dhclient" pid=340 comm="apparmor_parser"
[    8.583398] type=1400 audit(1396036550.618:3): apparmor="STATUS" operation="profile_load" parent=314 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=340 comm="apparmor_parser"
[    8.583401] type=1400 audit(1396036550.618:4): apparmor="STATUS" operation="profile_load" parent=314 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
[    8.583712] type=1400 audit(1396036550.618:5): apparmor="STATUS" operation="profile_replace" parent=314 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=340 comm="apparmor_parser"
[    8.583716] type=1400 audit(1396036550.618:6): apparmor="STATUS" operation="profile_replace" parent=314 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
[    8.583884] type=1400 audit(1396036550.618:7): apparmor="STATUS" operation="profile_replace" parent=314 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
[    8.733745] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[    8.734317] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.782089] r8169 0000:06:00.0 p5p1: link down
[    8.782108] r8169 0000:06:00.0 p5p1: link down
[    8.782153] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
[   10.115613] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[   10.115615] vesafb: scrolling: redraw
[   10.115617] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   10.117080] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004480000, using 1536k, total 1536k
[   10.117167] Console: switching to colour frame buffer device 128x48
[   10.121328] fb0: VESA VGA frame buffer device
[   10.323870] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.401327] init: failsafe main process (625) killed by TERM signal
[   10.421033] r8169 0000:06:00.0 p5p1: link up
[   10.421039] IPv6: ADDRCONF(NETDEV_CHANGE): p5p1: link becomes ready
[   10.705331] type=1400 audit(1396036552.742:8): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/sbin/dhclient" pid=733 comm="apparmor_parser"
[   10.705337] type=1400 audit(1396036552.742:9): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"
[   10.705340] type=1400 audit(1396036552.742:10): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=733 comm="apparmor_parser"
[   10.705671] type=1400 audit(1396036552.746:11): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"

 

 

 

/var/log# cat ./Xorg.0.log
[    12.570]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[    12.570] X Protocol Version 11, Revision 0
[    12.570] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    12.570] Current Operating System: Linux Miner-4 3.11.0-18-generic #32-Ubuntu SMP Tue Feb 18 21:11:14 UTC 2014 x86_64
[    12.570] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=8674ab0f-7c95-4aca-9a3a-7d0d5b9c373c ro config persistent splash vga=0x317 vmalloc=256M quiet vt.handoff=7
[    12.570] Build Date: 17 December 2013  10:06:15AM
[    12.571] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[    12.571] Current version of pixman: 0.30.2
[    12.571]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    12.571] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.571] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 28 23:55:54 2014
[    12.571] (==) Using config file: "/etc/X11/xorg.conf"
[    12.571] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.571] (==) ServerLayout "aticonfig Layout"
[    12.571] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    12.571] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    12.571] (**) |   |-->Device "aticonfig-Device[0]-0"
[    12.571] (**) |-->Screen "aticonfig-Screen[1]-0" (1)
[    12.571] (**) |   |-->Monitor "aticonfig-Monitor[1]-0"
[    12.571] (**) |   |-->Device "aticonfig-Device[1]-0"
[    12.571] (**) |-->Screen "aticonfig-Screen[2]-0" (2)
[    12.571] (**) |   |-->Monitor "aticonfig-Monitor[2]-0"
[    12.571] (**) |   |-->Device "aticonfig-Device[2]-0"
[    12.571] (**) |-->Screen "aticonfig-Screen[3]-0" (3)
[    12.571] (**) |   |-->Monitor "aticonfig-Monitor[3]-0"
[    12.571] (**) |   |-->Device "aticonfig-Device[3]-0"
[    12.571] (==) Automatically adding devices
[    12.571] (==) Automatically enabling devices
[    12.571] (==) Automatically adding GPU devices
[    12.711] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    12.711]    Entry deleted from font path.
[    12.711] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    12.711]    Entry deleted from font path.
[    12.711] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    12.711]    Entry deleted from font path.
[    12.737] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    12.737]    Entry deleted from font path.
[    12.737] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    12.737]    Entry deleted from font path.
[    12.737] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        built-ins
[    12.737] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    12.737] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.737] (II) Loader magic: 0x7f0ab6611d20
[    12.737] (II) Module ABI versions:
[    12.737]    X.Org ANSI C Emulation: 0.4
[    12.737]    X.Org Video Driver: 14.1
[    12.737]    X.Org XInput driver : 19.1
[    12.737]    X.Org Server Extension : 7.0
[    12.738] (--) PCI:*(0:2:0:0) 1002:6798:1458:3001 rev 0, Mem @ 0xe0000000/268435456, 0xf0000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    12.738] (--) PCI: (0:3:0:0) 1002:6798:1458:3001 rev 0, Mem @ 0xc0000000/268435456, 0xd0000000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    12.738] (--) PCI: (0:4:0:0) 1002:6798:1458:3001 rev 0, Mem @ 0xa0000000/268435456, 0xb0000000/262144, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[    12.738] (--) PCI: (0:5:0:0) 1002:6798:1458:3001 rev 0, Mem @ 0x80000000/268435456, 0x90000000/262144, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[    12.738] (II) Open ACPI successful (/var/run/acpid.socket)
[    12.738] Initializing built-in extension Generic Event Extension
[    12.738] Initializing built-in extension SHAPE
[    12.738] Initializing built-in extension MIT-SHM
[    12.738] Initializing built-in extension XInputExtension
[    12.738] Initializing built-in extension XTEST
[    12.738] Initializing built-in extension BIG-REQUESTS
[    12.738] Initializing built-in extension SYNC
[    12.738] Initializing built-in extension XKEYBOARD
[    12.738] Initializing built-in extension XC-MISC
[    12.738] Initializing built-in extension SECURITY
[    12.738] Initializing built-in extension XINERAMA
[    12.738] Initializing built-in extension XFIXES
[    12.738] Initializing built-in extension RENDER
[    12.738] Initializing built-in extension RANDR
[    12.738] Initializing built-in extension COMPOSITE
[    12.738] Initializing built-in extension DAMAGE
[    12.738] Initializing built-in extension MIT-SCREEN-SAVER
[    12.738] Initializing built-in extension DOUBLE-BUFFER
[    12.738] Initializing built-in extension RECORD
[    12.738] Initializing built-in extension DPMS
[    12.738] Initializing built-in extension X-Resource
[    12.738] Initializing built-in extension XVideo
[    12.738] Initializing built-in extension XVideo-MotionCompensation
[    12.738] Initializing built-in extension SELinux
[    12.738] Initializing built-in extension XFree86-VidModeExtension
[    12.738] Initializing built-in extension XFree86-DGA
[    12.738] Initializing built-in extension XFree86-DRI
[    12.738] Initializing built-in extension DRI2
[    12.738] (II) "glx" will be loaded by default.
[    12.738] (WW) "xmir" is not to be loaded by default. Skipping.
[    12.738] (II) LoadModule: "glx"
[    12.738] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[    12.739] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    12.739]    compiled for 6.9.0, module version = 1.0.0
[    12.739] Loading extension GLX
[    12.739] (II) LoadModule: "fglrx"
[    12.781] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[    12.792] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    12.792]    compiled for 1.4.99.906, module version = 13.35.5
[    12.792]    Module class: X.Org Video Driver
[    12.792] (II) Loading sub module "fglrxdrm"
[    12.792] (II) LoadModule: "fglrxdrm"
[    12.792] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[    12.902] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    12.902]    compiled for 1.4.99.906, module version = 13.35.5
[    12.902] (II) AMD Proprietary Linux Driver Version Identifier:13.35.5
[    12.902] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.35.1005
[    12.902] (II) AMD Proprietary Linux Driver Build Date: Mar 12 2014 10:32:23
[    12.902] (--) using VT number 1

[    12.906] (WW) Falling back to old probe method for fglrx
[    12.910] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    12.911] ukiDynamicMajor: found major device number 251
[    12.911] ukiDynamicMajor: found major device number 251
[    12.911] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    12.911] ukiOpenDevice: node name is /dev/ati/card0
[    12.911] ukiOpenDevice: open result is 11, (OK)
[    13.081] ukiOpenByBusid: ukiOpenMinor returns 11
[    13.081] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    13.082] ukiDynamicMajor: found major device number 251
[    13.082] ukiDynamicMajor: found major device number 251
[    13.082] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[    13.082] ukiOpenDevice: node name is /dev/ati/card0
[    13.082] ukiOpenDevice: open result is 11, (OK)
[    13.082] ukiOpenByBusid: ukiOpenMinor returns 11
[    13.082] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    13.082] ukiOpenDevice: node name is /dev/ati/card1

 

Изменено пользователем Uliss
Ссылка на комментарий
Поделиться на другие сайты

Смущает этот кусок dmesg

 

cat ./dmesg | grep conflict
[    8.857024] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    8.857031] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
[    8.857033] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 2 (20130517/utaddress-251)
[    8.857035] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 3 (20130517/utaddress-251)
[    8.857037] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
[    8.857039] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 2 (20130517/utaddress-251)
[    8.857041] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 3 (20130517/utaddress-251)
[    8.857043] lpc_ich: Resource conflict(s) found affecting gpio_ich
 

Может быть проблема в ядре? (3.11.0-18-generic)

У кого стабильно работает < 2 GPU на 13.10 убунте?

Изменено пользователем ga6iem
Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу
  • Similar Topics

    • nuxhash для Linux Ubuntu

      у меня почемуто не хочет работать nuxhash для linux ubuntu. При команде nuxhashd высвечивается следующее:  Traceback (most recent call last):   File "/usr/local/bin/nuxhashd", line 8, in <module>     sys.exit(nuxhashd())   File "/usr/local/lib/python3.8/dist-packages/nuxhash/__init__.py", line 3, in nuxhashd     main()   File "/usr/local/lib/python3.8/dist-packages/nuxhash/daemon.py", line 103, in main     nx_benchmarks = run_missing_benchmarks(   File "/usr/local/lib/py

      в Программы для майнинга

    • Проблема при переводе рига на ubuntu 18.04

      Добрый день, товарищи. Нужен ваш совет. История моя такова: изначально на риге из 13-и 574 карт стояла ubuntu 16.04. Драйвера 17.50 c опциями --opencl=legacy --headless. В grub прописывал GRUB_CMDLINE_LINUX_DEFAULT="text".  Был сделан автологин в консоль. Риг работал/перезагружался полностью удаленно через putty. К ригу не был подключен монитор/заглушка.    Собственно неделю назад после аварийного отключения питания начал получать ошибку Segmentation fault (core dumped). Удаленно решит

      в Общие вопросы по майнингу

    • Ubuntu опасна, как и Windows. Так доказал ютубер Gennady M

      Я пробовал много систем. Очень понравился DEEPIN, но из-за симпатичности и работоспособности. Более практичные дистрибутивы встречал у manjaro, solus, ubuntu. Пока остановился на SOLUS, но как-то тянет на ubuntu т.к. там изначально можно поставить минимальный набор программ. А вот после ролика "Как вы потеряете все биткоины" на канале Gennady M... слов нет. Тут надо систему себе из железок до 2006 года собрать и линукс накатить не от canonical. Я не специалист в железках, программах, но и ведущи

      в Флейм

    • Mining Beam | Linux | Ubuntu

      Запустил ноду, майнер. Копает уже 10 дней. На кошелек. Все под Ubuntu 16.04 LTS. Все запущено согласно официальной документации.  Синхронизирую кошелек. Баланс- ноль. В чем проблема? Сталкивался кто нибудь?

      в Общие вопросы по майнингу

    • Велика ли разница в уязвимости Windows 7 и Ubuntu, если только синхронизировать кошельки и отправлять/получать монетки?

      У меня отдельно выделенная машина под криптовалюты. Стоит зашифрованная Ubuntu 18.10 с холодными кошельками. На ней я мониторю приход и отправку криптовалюты. Никаких браузеров, антивирусов и файерволов. Работу с биржами осуществляю с линукса, но с флешки(Live CD) на обычном пк, который идёт под всякие нужды(работа/игрушки/фильмы/сёрфинг/общение). Правда, в BIOS я отключаю SSD и HDD перед загрузкой Live CD.  Но вот столкнулся с кошельком криптовалюты ADA, который называется Daedalus. Затруд

      в Безопасность

×
×
  • Создать...