Jump to content

Ubuntu 13.10 - Черный экран < 2 GPU

ga6iem

By ga6iem
in Аппаратная часть

 Share

Recommended Posts

ga6iem Новичок

ga6iem

Posted
Posted (edited)

HW:

R9-280X (GV-R928XOC-3GD-GA (rev. 2.0)) - 4шт.

MB ASROCK H81 Pro BTC

БП: 1500ватт

DDR3 - 4гб

В BIOS - GEN1

 

ПО:

Ubuntu 13.10 (minimal)

Linux_AMD_Catalyst_14.3_Beta_V1.0_B22_March12_2014

build-essential cdbs dh-make dkms execstack dh-modaliases linux-headers-generic fakeroot libqtgui4 lib32gcc1 mc xorg rxvt-unicode xfonts-terminus slim rcconf hddtemp hardinfo htop screen lm-sensors autoconf automake libtool libcurl3-dev libudev-dev libcurl4-openssl-dev libncurses5-dev pkg-config yasm git tcl tcllib tcl-tls php5 php5-cli

 

Проблема:

После установки каталиста при запуске иксов - черный экран, клавиатура/мышь висят, однако по SSH зайти на комп могу, cgminer запустить ноже, но и он сразу виснет, ситуация повторяется раз 10, на 11 иксы всте-ки поднимаются, майнинг идет. После выключения та же история. Уже менял и мать и память и БП, в общем все перепробовал. Проблема возникает именно после установки больше 2х видеокарт.

На сборках BAMP/SMOS проблем нет! Кто сталкивался с подобным?

 

Вот сейчас сижу по SSH при висящих иксах, в логах вроде все нормально, на мониторе черный квадрат

 

 

cat ./dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-18-generic (buildd@toyol) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #32-Ubuntu SMP Tue Feb 18 21:11:14 UTC 2014 (Ubuntu 3.11.0-18.32-generic 3.11.10.4)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=8674ab0f-7c95-4aca-9a3a-7d0d5b9c373c ro config persistent splash vga=0x317 vmalloc=256M quiet vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000690bdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000690be000-0x00000000690c4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000690c5000-0x0000000069815fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000069816000-0x0000000069a51fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000069a52000-0x000000007c5adfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c5ae000-0x000000007c635fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c636000-0x000000007c672fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c673000-0x000000007c717fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c718000-0x000000007cffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007cfff000-0x000000007cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H81 Pro BTC, BIOS P1.50 02/14/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x7d000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7FC0000000 write-back
[    0.000000]   1 base 0040000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0060000000 mask 7FF0000000 write-back
[    0.000000]   3 base 0070000000 mask 7FF8000000 write-back
[    0.000000]   4 base 0078000000 mask 7FFC000000 write-back
[    0.000000]   5 base 007C000000 mask 7FFC000000 write-back
[    0.000000]   6 base 007F000000 mask 7FFF000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1GB, range: 512MB, type WB
[    0.000000] reg 2, base: 1536MB, range: 256MB, type WB
[    0.000000] reg 3, base: 1792MB, range: 128MB, type WB
[    0.000000] reg 4, base: 1920MB, range: 64MB, type WB
[    0.000000] reg 5, base: 1984MB, range: 64MB, type WB
[    0.000000] reg 6, base: 2032MB, range: 16MB, type UC
[    0.000000] total RAM covered: 2032M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 32M         num_reg: 2      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2032MB, range: 16MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffff8800000fd800]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c200000-0x7c3fffff]
[    0.000000]  [mem 0x7c200000-0x7c3fffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c000000-0x7c1fffff]
[    0.000000]  [mem 0x7c000000-0x7c1fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x78000000-0x7bffffff]
[    0.000000]  [mem 0x78000000-0x7bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x690bdfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x68ffffff] page 2M
[    0.000000]  [mem 0x69000000-0x690bdfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x690c5000-0x69815fff]
[    0.000000]  [mem 0x690c5000-0x691fffff] page 4k
[    0.000000]  [mem 0x69200000-0x697fffff] page 2M
[    0.000000]  [mem 0x69800000-0x69815fff] page 4k
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x69a52000-0x77ffffff]
[    0.000000]  [mem 0x69a52000-0x69bfffff] page 4k
[    0.000000]  [mem 0x69c00000-0x77ffffff] page 2M
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c400000-0x7c5adfff]
[    0.000000]  [mem 0x7c400000-0x7c5adfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7c636000-0x7c672fff]
[    0.000000]  [mem 0x7c636000-0x7c672fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7cfff000-0x7cffffff]
[    0.000000]  [mem 0x7cfff000-0x7cffffff] page 4k
[    0.000000] RAMDISK: [mem 0x35eb0000-0x36f4ffff]
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 000000007c6f5078 00074 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 000000007c6ff5b8 0010C (v05 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 000000007c6f5188 0A430 (v02 ALASKA    A M I 00000150 INTL 20091112)
[    0.000000] ACPI: FACS 000000007c716080 00040
[    0.000000] ACPI: APIC 000000007c6ff6c8 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 000000007c6ff730 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 000000007c6ff778 00539 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000007c6ffcb8 00AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 000000007c700790 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 000000007c7007d0 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 000000007c700808 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 000000007c700b78 03493 (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
[    0.000000] ACPI: AAFT 000000007c704010 002BB (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7cffffff]
[    0.000000]   NODE_DATA [mem 0x7c66d000-0x7c671fff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880079a00000-ffff88007b9fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x690bdfff]
[    0.000000]   node   0: [mem 0x690c5000-0x69815fff]
[    0.000000]   node   0: [mem 0x69a52000-0x7c5adfff]
[    0.000000]   node   0: [mem 0x7c636000-0x7c672fff]
[    0.000000]   node   0: [mem 0x7cfff000-0x7cffffff]
[    0.000000] On node 0 totalpages: 508741
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7936 pages used for memmap
[    0.000000]   DMA32 zone: 504745 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x690be000-0x690c4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x69816000-0x69a51fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c5ae000-0x7c635fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c673000-0x7c717fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c718000-0x7cffefff]
[    0.000000] e820: [mem 0x7d000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007c000000 s86720 r8192 d23872 u1048576
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 500720
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=8674ab0f-7c95-4aca-9a3a-7d0d5b9c373c ro config persistent splash vga=0x317 vmalloc=256M quiet vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1968348K/2034964K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1364K init, 1420K bss, 66616K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2999.327 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.65 BogoMIPS (lpj=11997308)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000020] Security Framework initialized
[    0.000033] AppArmor: AppArmor initialized
[    0.000034] Yama: becoming mindful.
[    0.000145] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000645] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000875] Mount-cache hash table entries: 256
[    0.001005] Initializing cgroup subsys memory
[    0.001012] Initializing cgroup subsys devices
[    0.001014] Initializing cgroup subsys freezer
[    0.001015] Initializing cgroup subsys blkio
[    0.001016] Initializing cgroup subsys perf_event
[    0.001018] Initializing cgroup subsys hugetlb
[    0.001034] CPU: Physical Processor ID: 0
[    0.001035] CPU: Processor Core ID: 0
[    0.001818] mce: CPU supports 7 MCE banks
[    0.001827] CPU0: Thermal monitoring enabled (TM1)
[    0.001835] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.001835] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.001835] tlb_flushall_shift: 6
[    0.001924] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.003338] ACPI: Core revision 20130517
[    0.008441] ACPI: All ACPI Tables successfully acquired
[    0.008632] ftrace: allocating 27858 entries in 109 pages
[    0.018138] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057775] smpboot: CPU0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (fam: 06, model: 3c, stepping: 03)
[    0.057781] TSC deadline timer enabled
[    0.057788] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.057794] ... version:                3
[    0.057794] ... bit width:              48
[    0.057795] ... generic registers:      8
[    0.057796] ... value mask:             0000ffffffffffff
[    0.057797] ... max period:             0000ffffffffffff
[    0.057797] ... fixed-purpose events:   3
[    0.057798] ... event mask:             00000007000000ff
[    0.058812] smpboot: Booting Node   0, Processors  #1 OK
[    0.072735] Brought up 2 CPUs
[    0.072738] smpboot: Total of 2 processors activated (11997.30 BogoMIPS)
[    0.072797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.074162] devtmpfs: initialized
[    0.074690] EVM: security.selinux
[    0.074691] EVM: security.SMACK64
[    0.074691] EVM: security.capability
[    0.074731] PM: Registering ACPI NVS region [mem 0x690be000-0x690c4fff] (28672 bytes)
[    0.074732] PM: Registering ACPI NVS region [mem 0x7c673000-0x7c717fff] (675840 bytes)
[    0.075262] regulator-dummy: no parameters
[    0.075287] RTC time: 19:55:41, date: 03/28/14
[    0.075308] NET: Registered protocol family 16
[    0.075404] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.075405] ACPI: bus type PCI registered
[    0.075407] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.075439] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.075441] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.079749] PCI: Using configuration type 1 for base access
[    0.080239] bio: create slab <bio-0> at 0
[    0.080328] ACPI: Added _OSI(Module Device)
[    0.080329] ACPI: Added _OSI(Processor Device)
[    0.080330] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.080331] ACPI: Added _OSI(Processor Aggregator Device)
[    0.081556] ACPI: EC: Look up EC in DSDT
[    0.082988] ACPI: Executed 1 blocks of module-level executable AML code
[    0.084586] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.086106] ACPI: SSDT 000000007c62bc18 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.086418] ACPI: Dynamic OEM Table Load:
[    0.086419] ACPI: SSDT           (null) 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.090199] ACPI: SSDT 000000007c62b618 005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.090562] ACPI: Dynamic OEM Table Load:
[    0.090564] ACPI: SSDT           (null) 005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.094114] ACPI: SSDT 000000007c62ad98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.094422] ACPI: Dynamic OEM Table Load:
[    0.094423] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.098308] ACPI: Interpreter enabled
[    0.098313] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.098317] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.098328] ACPI: (supports S0 S3 S4 S5)
[    0.098329] ACPI: Using IOAPIC for interrupt routing
[    0.098368] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.098465] ACPI: No dock devices found.
[    0.104613] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.104756] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.104897] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[    0.105227] PCI host bridge to bus 0000:00
[    0.105229] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.105230] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.105231] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.105232] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.105233] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.105234] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.105235] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.105236] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.105237] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.105239] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.105240] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfeafffff]
[    0.105247] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.105310] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.105335] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.105400] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.105417] pci 0000:00:14.0: reg 0x10: [mem 0x90100000-0x9010ffff 64bit]
[    0.105469] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.105502] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.105523] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.105540] pci 0000:00:16.0: reg 0x10: [mem 0x90116000-0x9011600f 64bit]
[    0.105596] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.105656] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.105674] pci 0000:00:1a.0: reg 0x10: [mem 0x90114000-0x901143ff]
[    0.105753] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.105796] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.105816] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.105873] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.105908] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.105927] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.105984] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.106018] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.106037] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.106097] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.106132] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.106153] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[    0.106209] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.106244] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.106262] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.106319] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.106354] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.106380] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.106398] pci 0000:00:1d.0: reg 0x10: [mem 0x90113000-0x901133ff]
[    0.106477] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.106519] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.106543] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.106682] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.106695] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.106701] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.106707] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.106713] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.106719] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.106725] pci 0000:00:1f.2: reg 0x24: [mem 0x90112000-0x901127ff]
[    0.106758] pci 0000:00:1f.2: PME# supported from D3hot
[    0.106803] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.106815] pci 0000:00:1f.3: reg 0x10: [mem 0x90111000-0x901110ff 64bit]
[    0.106832] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.106910] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.106964] pci 0000:02:00.0: [1002:6798] type 00 class 0x030000
[    0.106981] pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.106995] pci 0000:02:00.0: reg 0x18: [mem 0xf0000000-0xf003ffff 64bit]
[    0.107004] pci 0000:02:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.107021] pci 0000:02:00.0: reg 0x30: [mem 0xf0040000-0xf005ffff pref]
[    0.107075] pci 0000:02:00.0: supports D1 D2
[    0.107076] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[    0.107123] pci 0000:02:00.1: [1002:aaa0] type 00 class 0x040300
[    0.107140] pci 0000:02:00.1: reg 0x10: [mem 0xf0060000-0xf0063fff 64bit]
[    0.107232] pci 0000:02:00.1: supports D1 D2
[    0.114097] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.114100] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.114103] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xf00fffff]
[    0.114158] pci 0000:03:00.0: [1002:6798] type 00 class 0x030000
[    0.114175] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.114189] pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd003ffff 64bit]
[    0.114198] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.114215] pci 0000:03:00.0: reg 0x30: [mem 0xd0040000-0xd005ffff pref]
[    0.114268] pci 0000:03:00.0: supports D1 D2
[    0.114269] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.114317] pci 0000:03:00.1: [1002:aaa0] type 00 class 0x040300
[    0.114333] pci 0000:03:00.1: reg 0x10: [mem 0xd0060000-0xd0063fff 64bit]
[    0.114426] pci 0000:03:00.1: supports D1 D2
[    0.122093] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.122096] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.122098] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xd00fffff]
[    0.122153] pci 0000:04:00.0: [1002:6798] type 00 class 0x030000
[    0.122170] pci 0000:04:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.122184] pci 0000:04:00.0: reg 0x18: [mem 0xb0000000-0xb003ffff 64bit]
[    0.122193] pci 0000:04:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.122210] pci 0000:04:00.0: reg 0x30: [mem 0xb0040000-0xb005ffff pref]
[    0.122263] pci 0000:04:00.0: supports D1 D2
[    0.122264] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.122310] pci 0000:04:00.1: [1002:aaa0] type 00 class 0x040300
[    0.122327] pci 0000:04:00.1: reg 0x10: [mem 0xb0060000-0xb0063fff 64bit]
[    0.122420] pci 0000:04:00.1: supports D1 D2
[    0.130090] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.130093] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.130096] pci 0000:00:1c.3:   bridge window [mem 0xa0000000-0xb00fffff]
[    0.130150] pci 0000:05:00.0: [1002:6798] type 00 class 0x030000
[    0.130167] pci 0000:05:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.130181] pci 0000:05:00.0: reg 0x18: [mem 0x90000000-0x9003ffff 64bit]
[    0.130190] pci 0000:05:00.0: reg 0x20: [io  0xb000-0xb0ff]
[    0.130207] pci 0000:05:00.0: reg 0x30: [mem 0x90040000-0x9005ffff pref]
[    0.130260] pci 0000:05:00.0: supports D1 D2
[    0.130261] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[    0.130308] pci 0000:05:00.1: [1002:aaa0] type 00 class 0x040300
[    0.130325] pci 0000:05:00.1: reg 0x10: [mem 0x90060000-0x90063fff 64bit]
[    0.130417] pci 0000:05:00.1: supports D1 D2
[    0.138087] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.138090] pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
[    0.138093] pci 0000:00:1c.4:   bridge window [mem 0x80000000-0x900fffff]
[    0.138151] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    0.138166] pci 0000:06:00.0: reg 0x10: [io  0xa000-0xa0ff]
[    0.138192] pci 0000:06:00.0: reg 0x18: [mem 0xf0204000-0xf0204fff 64bit]
[    0.138209] pci 0000:06:00.0: reg 0x20: [mem 0xf0200000-0xf0203fff 64bit pref]
[    0.138279] pci 0000:06:00.0: supports D1 D2
[    0.138280] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.146085] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.146087] pci 0000:00:1c.5:   bridge window [io  0xa000-0xafff]
[    0.146090] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.146112] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.146696] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.146730] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.146761] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.146793] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.146824] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146887] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146918] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.147172] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.147177] ACPI: \_SB_.PCI0: notify handler is installed
[    0.147220] Found 1 acpi root devices
[    0.147281] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.147285] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
[    0.147288] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
[    0.147290] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
[    0.147291] vgaarb: loaded
[    0.147292] vgaarb: bridge control possible 0000:05:00.0
[    0.147293] vgaarb: bridge control possible 0000:04:00.0
[    0.147293] vgaarb: bridge control possible 0000:03:00.0
[    0.147294] vgaarb: bridge control possible 0000:02:00.0
[    0.147391] SCSI subsystem initialized
[    0.147392] ACPI: bus type ATA registered
[    0.147416] libata version 3.00 loaded.
[    0.147425] ACPI: bus type USB registered
[    0.147435] usbcore: registered new interface driver usbfs
[    0.147440] usbcore: registered new interface driver hub
[    0.147455] usbcore: registered new device driver usb
[    0.147516] PCI: Using ACPI for IRQ routing
[    0.148718] PCI: pci_cache_line_size set to 64 bytes
[    0.148768] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.148769] e820: reserve RAM buffer [mem 0x690be000-0x6bffffff]
[    0.148770] e820: reserve RAM buffer [mem 0x69816000-0x6bffffff]
[    0.148771] e820: reserve RAM buffer [mem 0x7c5ae000-0x7fffffff]
[    0.148772] e820: reserve RAM buffer [mem 0x7c673000-0x7fffffff]
[    0.148773] e820: reserve RAM buffer [mem 0x7d000000-0x7fffffff]
[    0.148825] NetLabel: Initializing
[    0.148826] NetLabel:  domain hash size = 128
[    0.148826] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.148832] NetLabel:  unlabeled traffic allowed by default
[    0.148875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.148879] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.150893] Switched to clocksource hpet
[    0.153955] AppArmor: AppArmor Filesystem Enabled
[    0.153976] pnp: PnP ACPI init
[    0.153985] ACPI: bus type PNP registered
[    0.154057] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.154060] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.154070] pnp 00:01: [dma 4]
[    0.154078] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.154090] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.154156] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.154231] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.154232] system 00:04: [io  0xffff] has been reserved
[    0.154233] system 00:04: [io  0xffff] has been reserved
[    0.154235] system 00:04: [io  0xffff] has been reserved
[    0.154236] system 00:04: [io  0x1c00-0x1cfe] has been reserved
[    0.154237] system 00:04: [io  0x1d00-0x1dfe] has been reserved
[    0.154238] system 00:04: [io  0x1e00-0x1efe] has been reserved
[    0.154239] system 00:04: [io  0x1f00-0x1ffe] has been reserved
[    0.154241] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.154242] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.154243] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154262] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.154289] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.154291] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.154337] system 00:07: [io  0x0290-0x029f] has been reserved
[    0.154338] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154527] pnp 00:08: [dma 3]
[    0.154589] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.154618] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.154619] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154633] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.155010] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.155012] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.155013] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.155014] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.155015] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.155017] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.155018] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.155019] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.155020] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.155022] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.155023] system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
[    0.155024] system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    0.155026] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155197] pnp: PnP ACPI: found 12 devices
[    0.155198] ACPI: bus type PNP unregistered
[    0.160841] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.160847] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.160849] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.160853] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xf00fffff]
[    0.160859] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.160861] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.160865] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xd00fffff]
[    0.160871] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.160872] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.160876] pci 0000:00:1c.3:   bridge window [mem 0xa0000000-0xb00fffff]
[    0.160882] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.160884] pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
[    0.160887] pci 0000:00:1c.4:   bridge window [mem 0x80000000-0x900fffff]
[    0.160893] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.160895] pci 0000:00:1c.5:   bridge window [io  0xa000-0xafff]
[    0.160899] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.161145] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.161146] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.161147] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.161148] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.161149] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.161150] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.161151] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.161152] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.161153] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.161154] pci_bus 0000:00: resource 13 [mem 0x7f000000-0xfeafffff]
[    0.161156] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.161157] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xf00fffff]
[    0.161158] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.161159] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xd00fffff]
[    0.161160] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.161161] pci_bus 0000:04: resource 1 [mem 0xa0000000-0xb00fffff]
[    0.161162] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
[    0.161163] pci_bus 0000:05: resource 1 [mem 0x80000000-0x900fffff]
[    0.161164] pci_bus 0000:06: resource 0 [io  0xa000-0xafff]
[    0.161165] pci_bus 0000:06: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.161187] NET: Registered protocol family 2
[    0.161289] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.161351] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.161402] TCP: Hash tables configured (established 16384 bind 16384)
[    0.161418] TCP: reno registered
[    0.161421] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.161430] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.161465] NET: Registered protocol family 1
[    0.198905] pci 0000:02:00.0: Boot video device
[    0.198924] PCI: CLS 64 bytes, default 64
[    0.198954] Trying to unpack rootfs image as initramfs...
[    0.398916] Freeing initrd memory: 17024K (ffff880035eb0000 - ffff880036f50000)
[    0.399017] Scanning for low memory corruption every 60 seconds
[    0.399186] Initialise module verification
[    0.399215] audit: initializing netlink socket (disabled)
[    0.399223] type=2000 audit(1396036541.400:1): initialized
[    0.418162] bounce pool size: 64 pages
[    0.418168] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.418822] zbud: loaded
[    0.418912] VFS: Disk quotas dquot_6.5.2
[    0.418936] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.419205] fuse init (API version 7.22)
[    0.419254] msgmni has been set to 3877
[    0.419516] Key type asymmetric registered
[    0.419517] Asymmetric key parser 'x509' registered
[    0.419535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.419553] io scheduler noop registered
[    0.419554] io scheduler deadline registered (default)
[    0.419567] io scheduler cfq registered
[    0.419632] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.419804] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.419812] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.419845] intel_idle: MWAIT substates: 0x2120
[    0.419846] intel_idle: v0.4 model 0x3C
[    0.419846] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.419908] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.419911] ACPI: Power Button [PWRB]
[    0.419932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.419934] ACPI: Power Button [PWRF]
[    0.420003] ACPI: Requesting acpi_cpufreq
[    0.420147] GHES: HEST is not enabled!
[    0.420185] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.420809] Linux agpgart interface v0.103
[    0.421476] brd: module loaded
[    0.421811] loop: module loaded
[    0.421990] libphy: Fixed MDIO Bus: probed
[    0.422034] tun: Universal TUN/TAP device driver, 1.6
[    0.422035] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.422056] PPP generic driver version 2.4.2
[    0.422078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.422079] ehci-pci: EHCI PCI platform driver
[    0.422143] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.422149] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.422152] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.422163] ehci-pci 0000:00:1a.0: debug port 2
[    0.426044] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.426056] ehci-pci 0000:00:1a.0: irq 16, io mem 0x90114000
[    0.434542] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.434560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.434561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.434562] usb usb1: Product: EHCI Host Controller
[    0.434563] usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[    0.434564] usb usb1: SerialNumber: 0000:00:1a.0
[    0.434620] hub 1-0:1.0: USB hub found
[    0.434623] hub 1-0:1.0: 2 ports detected
[    0.434736] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.434740] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.434743] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.434752] ehci-pci 0000:00:1d.0: debug port 2
[    0.438632] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.438641] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90113000
[    0.450522] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.450535] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.450536] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.450537] usb usb2: Product: EHCI Host Controller
[    0.450538] usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[    0.450539] usb usb2: SerialNumber: 0000:00:1d.0
[    0.450583] hub 2-0:1.0: USB hub found
[    0.450585] hub 2-0:1.0: 2 ports detected
[    0.450640] ehci-platform: EHCI generic platform driver
[    0.450644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.450645] ohci-pci: OHCI PCI platform driver
[    0.450650] ohci-platform: OHCI generic platform driver
[    0.450653] uhci_hcd: USB Universal Host Controller Interface driver
[    0.450716] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.450718] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.450721] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.450794] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.450807] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.450837] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.450839] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.450840] usb usb3: Product: xHCI Host Controller
[    0.450841] usb usb3: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
[    0.450842] usb usb3: SerialNumber: 0000:00:14.0
[    0.450878] xHCI xhci_add_endpoint called for root hub
[    0.450879] xHCI xhci_check_bandwidth called for root hub
[    0.450890] hub 3-0:1.0: USB hub found
[    0.450898] hub 3-0:1.0: 10 ports detected
[    0.451998] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.452000] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.452012] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.452013] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.452014] usb usb4: Product: xHCI Host Controller
[    0.452015] usb usb4: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
[    0.452016] usb usb4: SerialNumber: 0000:00:14.0
[    0.452051] xHCI xhci_add_endpoint called for root hub
[    0.452052] xHCI xhci_check_bandwidth called for root hub
[    0.452063] hub 4-0:1.0: USB hub found
[    0.452066] hub 4-0:1.0: 2 ports detected
[    0.462538] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.465311] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.465314] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.465372] mousedev: PS/2 mouse device common for all mice
[    0.465438] rtc_cmos 00:05: RTC can wake from S4
[    0.465529] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.465551] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.465586] device-mapper: uevent: version 1.0.3
[    0.465616] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.465643] cpuidle: using governor ladder
[    0.465672] cpuidle: using governor menu
[    0.465678] ledtrig-cpu: registered to indicate activity on CPUs
[    0.465731] TCP: cubic registered
[    0.465778] NET: Registered protocol family 10
[    0.465885] NET: Registered protocol family 17
[    0.465891] Key type dns_resolver registered
[    0.466012] PM: Hibernation image not present or could not be loaded.
[    0.466014] Loading module verification certificates
[    0.466596] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9d94dc8d073854d044b3fa3652786ac75597c2f5'
[    0.466603] registered taskstats version 1
[    0.467826] Key type trusted registered
[    0.468803] Key type encrypted registered
[    0.469797] AppArmor: AppArmor sha1 policy hashing enabled
[    0.470218]   Magic number: 6:991:951
[    0.470238] tty tty8: hash matches
[    0.470265] memory memory4: hash matches
[    0.470293] rtc_cmos 00:05: setting system clock to 2014-03-28 19:55:42 UTC (1396036542)
[    0.470546] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.470547] EDD information not available.
[    0.471179] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    0.471180] Write protecting the kernel read-only data: 12288k
[    0.472826] Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
[    0.473991] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
[    0.481075] systemd-udevd[100]: starting version 204
[    0.503154] ahci 0000:00:1f.2: version 3.0
[    0.503254] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.503286] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    0.503288] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[    0.503291] ahci 0000:00:1f.2: setting latency timer to 64
[    0.505513] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.505519] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.505799] scsi0 : ahci
[    0.505853] scsi1 : ahci
[    0.507387] scsi2 : ahci
[    0.507531] scsi3 : ahci
[    0.507582] ata1: SATA max UDMA/133 abar m2048@0x90112000 port 0x90112100 irq 42
[    0.507584] ata2: DUMMY
[    0.507584] ata3: DUMMY
[    0.507585] ata4: DUMMY
[    0.511433] r8169 0000:06:00.0: irq 43 for MSI/MSI-X
[    0.512083] r8169 0000:06:00.0 eth0: RTL8168g/8111g at 0xffffc9000032a000, d0:50:99:06:39:c5, XID 0c000800 IRQ 43
[    0.512085] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.746170] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.826082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.859711] ata1.00: ATA-8: ST250LT012-9WS141, 0001SDM1, max UDMA/133
[    0.859713] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.878424] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    0.878426] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.878665] hub 1-1:1.0: USB hub found
[    0.878781] hub 1-1:1.0: 4 ports detected
[    0.909453] ata1.00: configured for UDMA/133
[    0.909623] scsi 0:0:0:0: Direct-Access     ATA      ST250LT012-9WS14 0001 PQ: 0 ANSI: 5
[    0.909724] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.909736] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.909739] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.909770] sd 0:0:0:0: [sda] Write Protect is off
[    0.909771] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.909790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.955536]  sda: sda1 sda2 < sda5 >
[    0.955876] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.989865] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.122115] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.122117] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.122354] hub 2-1:1.0: USB hub found
[    1.122460] hub 2-1:1.0: 6 ports detected
[    1.397346] tsc: Refined TSC clocksource calibration: 2999.129 MHz
[    1.934136] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.934138] EXT4-fs (sda1): write access will be enabled during recovery
[    2.208932] EXT4-fs (sda1): recovery complete
[    2.217951] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.396104] Switched to clocksource tsc
[    8.151410] Adding 2033660k swap on /dev/sda5.  Priority:-1 extents:1 across:2033660k FS
[    8.195737] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.253509] systemd-udevd[277]: starting version 204
[    8.353174] lp: driver loaded but no devices found
[    8.410532] parport_pc 00:08: reported by Plug and Play ACPI
[    8.410584] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    8.421722] mei_me 0000:00:16.0: setting latency timer to 64
[    8.421751] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[    8.423781] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    8.423782] AMD IOMMUv2 functionality not available on this system
[    8.434355] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    8.434358] Disabling lock debugging due to kernel taint
[    8.441154] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[    8.451263] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    8.451269] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.451271] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
[    8.451273] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 2 (20130517/utaddress-251)
[    8.451275] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 3 (20130517/utaddress-251)
[    8.451277] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.451277] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
[    8.451279] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 2 (20130517/utaddress-251)
[    8.451280] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 3 (20130517/utaddress-251)
[    8.451282] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.451283] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.455322] hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
[    8.455324] hda-intel 0000:02:00.1: Using LPIB position fix
[    8.455325] hda-intel 0000:02:00.1: Force to non-snoop mode
[    8.455359] snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
[    8.467050] <6>[fglrx] Maximum main memory to use for locked dma buffers: 1817 MBytes.
[    8.467185] <6>[fglrx]   vendor: 1002 device: 6798 count: 1
[    8.467187] <6>[fglrx]   vendor: 1002 device: 6798 count: 2
[    8.467188] <6>[fglrx]   vendor: 1002 device: 6798 count: 3
[    8.467189] <6>[fglrx]   vendor: 1002 device: 6798 count: 4
[    8.467422] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[    8.467498] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[    8.467503] pci 0000:03:00.0: enabling device (0000 -> 0003)
[    8.467535] <6>[fglrx] ioport: bar 4, base 0xc000, size: 0x100
[    8.467539] pci 0000:04:00.0: enabling device (0000 -> 0003)
[    8.467567] <6>[fglrx] ioport: bar 4, base 0xb000, size: 0x100
[    8.467571] pci 0000:05:00.0: enabling device (0000 -> 0003)
[    8.467690] <6>[fglrx] Kernel PAT support is enabled
[    8.467712] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 4 minors
[    8.467748] hda-intel 0000:02:00.1: Enable sync_write for stable communication
[    8.475519] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input2
[    8.475589] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input3
[    8.475645] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input4
[    8.475692] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input5
[    8.475738] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input6
[    8.475782] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input7
[    8.476055] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[    8.476056] hda-intel 0000:03:00.1: Using LPIB position fix
[    8.476057] hda-intel 0000:03:00.1: Force to non-snoop mode
[    8.476088] snd_hda_intel 0000:03:00.1: irq 46 for MSI/MSI-X
[    8.481410] hda-intel 0000:03:00.1: Enable sync_write for stable communication
[    8.482732] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input8
[    8.482779] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input9
[    8.482810] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input10
[    8.482839] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input11
[    8.482866] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input12
[    8.482894] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/sound/card1/input13
[    8.483088] hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
[    8.483090] hda-intel 0000:04:00.1: Using LPIB position fix
[    8.483091] hda-intel 0000:04:00.1: Force to non-snoop mode
[    8.483127] snd_hda_intel 0000:04:00.1: irq 47 for MSI/MSI-X
[    8.485468] hda-intel 0000:04:00.1: Enable sync_write for stable communication
[    8.486748] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input14
[    8.486789] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input15
[    8.486818] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input16
[    8.486846] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input17
[    8.486873] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input18
[    8.486901] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.1/sound/card2/input19
[    8.487076] hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
[    8.487077] hda-intel 0000:05:00.1: Using LPIB position fix
[    8.487078] hda-intel 0000:05:00.1: Force to non-snoop mode
[    8.487106] snd_hda_intel 0000:05:00.1: irq 48 for MSI/MSI-X
[    8.489442] hda-intel 0000:05:00.1: Enable sync_write for stable communication
[    8.490724] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input20
[    8.490759] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input21
[    8.490788] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input22
[    8.490814] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input23
[    8.490842] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input24
[    8.490868] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card3/input25
[    8.502553] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[    8.508294] lp0: using parport0 (interrupt-driven).
[    8.536773] ppdev: user-space parallel port driver
[    8.583393] type=1400 audit(1396036550.618:2): apparmor="STATUS" operation="profile_load" parent=314 profile="unconfined" name="/sbin/dhclient" pid=340 comm="apparmor_parser"
[    8.583398] type=1400 audit(1396036550.618:3): apparmor="STATUS" operation="profile_load" parent=314 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=340 comm="apparmor_parser"
[    8.583401] type=1400 audit(1396036550.618:4): apparmor="STATUS" operation="profile_load" parent=314 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
[    8.583712] type=1400 audit(1396036550.618:5): apparmor="STATUS" operation="profile_replace" parent=314 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=340 comm="apparmor_parser"
[    8.583716] type=1400 audit(1396036550.618:6): apparmor="STATUS" operation="profile_replace" parent=314 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
[    8.583884] type=1400 audit(1396036550.618:7): apparmor="STATUS" operation="profile_replace" parent=314 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
[    8.733745] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[    8.734317] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.782089] r8169 0000:06:00.0 p5p1: link down
[    8.782108] r8169 0000:06:00.0 p5p1: link down
[    8.782153] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
[   10.115613] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[   10.115615] vesafb: scrolling: redraw
[   10.115617] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   10.117080] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004480000, using 1536k, total 1536k
[   10.117167] Console: switching to colour frame buffer device 128x48
[   10.121328] fb0: VESA VGA frame buffer device
[   10.323870] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.401327] init: failsafe main process (625) killed by TERM signal
[   10.421033] r8169 0000:06:00.0 p5p1: link up
[   10.421039] IPv6: ADDRCONF(NETDEV_CHANGE): p5p1: link becomes ready
[   10.705331] type=1400 audit(1396036552.742:8): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/sbin/dhclient" pid=733 comm="apparmor_parser"
[   10.705337] type=1400 audit(1396036552.742:9): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"
[   10.705340] type=1400 audit(1396036552.742:10): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=733 comm="apparmor_parser"
[   10.705671] type=1400 audit(1396036552.746:11): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"

 

 

 

/var/log# cat ./Xorg.0.log
[    12.570]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[    12.570] X Protocol Version 11, Revision 0
[    12.570] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    12.570] Current Operating System: Linux Miner-4 3.11.0-18-generic #32-Ubuntu SMP Tue Feb 18 21:11:14 UTC 2014 x86_64
[    12.570] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=8674ab0f-7c95-4aca-9a3a-7d0d5b9c373c ro config persistent splash vga=0x317 vmalloc=256M quiet vt.handoff=7
[    12.570] Build Date: 17 December 2013  10:06:15AM
[    12.571] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[    12.571] Current version of pixman: 0.30.2
[    12.571]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    12.571] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.571] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 28 23:55:54 2014
[    12.571] (==) Using config file: "/etc/X11/xorg.conf"
[    12.571] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.571] (==) ServerLayout "aticonfig Layout"
[    12.571] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    12.571] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    12.571] (**) |   |-->Device "aticonfig-Device[0]-0"
[    12.571] (**) |-->Screen "aticonfig-Screen[1]-0" (1)
[    12.571] (**) |   |-->Monitor "aticonfig-Monitor[1]-0"
[    12.571] (**) |   |-->Device "aticonfig-Device[1]-0"
[    12.571] (**) |-->Screen "aticonfig-Screen[2]-0" (2)
[    12.571] (**) |   |-->Monitor "aticonfig-Monitor[2]-0"
[    12.571] (**) |   |-->Device "aticonfig-Device[2]-0"
[    12.571] (**) |-->Screen "aticonfig-Screen[3]-0" (3)
[    12.571] (**) |   |-->Monitor "aticonfig-Monitor[3]-0"
[    12.571] (**) |   |-->Device "aticonfig-Device[3]-0"
[    12.571] (==) Automatically adding devices
[    12.571] (==) Automatically enabling devices
[    12.571] (==) Automatically adding GPU devices
[    12.711] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    12.711]    Entry deleted from font path.
[    12.711] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    12.711]    Entry deleted from font path.
[    12.711] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    12.711]    Entry deleted from font path.
[    12.737] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    12.737]    Entry deleted from font path.
[    12.737] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    12.737]    Entry deleted from font path.
[    12.737] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        built-ins
[    12.737] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    12.737] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.737] (II) Loader magic: 0x7f0ab6611d20
[    12.737] (II) Module ABI versions:
[    12.737]    X.Org ANSI C Emulation: 0.4
[    12.737]    X.Org Video Driver: 14.1
[    12.737]    X.Org XInput driver : 19.1
[    12.737]    X.Org Server Extension : 7.0
[    12.738] (--) PCI:*(0:2:0:0) 1002:6798:1458:3001 rev 0, Mem @ 0xe0000000/268435456, 0xf0000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    12.738] (--) PCI: (0:3:0:0) 1002:6798:1458:3001 rev 0, Mem @ 0xc0000000/268435456, 0xd0000000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    12.738] (--) PCI: (0:4:0:0) 1002:6798:1458:3001 rev 0, Mem @ 0xa0000000/268435456, 0xb0000000/262144, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[    12.738] (--) PCI: (0:5:0:0) 1002:6798:1458:3001 rev 0, Mem @ 0x80000000/268435456, 0x90000000/262144, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[    12.738] (II) Open ACPI successful (/var/run/acpid.socket)
[    12.738] Initializing built-in extension Generic Event Extension
[    12.738] Initializing built-in extension SHAPE
[    12.738] Initializing built-in extension MIT-SHM
[    12.738] Initializing built-in extension XInputExtension
[    12.738] Initializing built-in extension XTEST
[    12.738] Initializing built-in extension BIG-REQUESTS
[    12.738] Initializing built-in extension SYNC
[    12.738] Initializing built-in extension XKEYBOARD
[    12.738] Initializing built-in extension XC-MISC
[    12.738] Initializing built-in extension SECURITY
[    12.738] Initializing built-in extension XINERAMA
[    12.738] Initializing built-in extension XFIXES
[    12.738] Initializing built-in extension RENDER
[    12.738] Initializing built-in extension RANDR
[    12.738] Initializing built-in extension COMPOSITE
[    12.738] Initializing built-in extension DAMAGE
[    12.738] Initializing built-in extension MIT-SCREEN-SAVER
[    12.738] Initializing built-in extension DOUBLE-BUFFER
[    12.738] Initializing built-in extension RECORD
[    12.738] Initializing built-in extension DPMS
[    12.738] Initializing built-in extension X-Resource
[    12.738] Initializing built-in extension XVideo
[    12.738] Initializing built-in extension XVideo-MotionCompensation
[    12.738] Initializing built-in extension SELinux
[    12.738] Initializing built-in extension XFree86-VidModeExtension
[    12.738] Initializing built-in extension XFree86-DGA
[    12.738] Initializing built-in extension XFree86-DRI
[    12.738] Initializing built-in extension DRI2
[    12.738] (II) "glx" will be loaded by default.
[    12.738] (WW) "xmir" is not to be loaded by default. Skipping.
[    12.738] (II) LoadModule: "glx"
[    12.738] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[    12.739] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    12.739]    compiled for 6.9.0, module version = 1.0.0
[    12.739] Loading extension GLX
[    12.739] (II) LoadModule: "fglrx"
[    12.781] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[    12.792] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    12.792]    compiled for 1.4.99.906, module version = 13.35.5
[    12.792]    Module class: X.Org Video Driver
[    12.792] (II) Loading sub module "fglrxdrm"
[    12.792] (II) LoadModule: "fglrxdrm"
[    12.792] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[    12.902] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    12.902]    compiled for 1.4.99.906, module version = 13.35.5
[    12.902] (II) AMD Proprietary Linux Driver Version Identifier:13.35.5
[    12.902] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.35.1005
[    12.902] (II) AMD Proprietary Linux Driver Build Date: Mar 12 2014 10:32:23
[    12.902] (--) using VT number 1

[    12.906] (WW) Falling back to old probe method for fglrx
[    12.910] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    12.911] ukiDynamicMajor: found major device number 251
[    12.911] ukiDynamicMajor: found major device number 251
[    12.911] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    12.911] ukiOpenDevice: node name is /dev/ati/card0
[    12.911] ukiOpenDevice: open result is 11, (OK)
[    13.081] ukiOpenByBusid: ukiOpenMinor returns 11
[    13.081] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    13.082] ukiDynamicMajor: found major device number 251
[    13.082] ukiDynamicMajor: found major device number 251
[    13.082] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[    13.082] ukiOpenDevice: node name is /dev/ati/card0
[    13.082] ukiOpenDevice: open result is 11, (OK)
[    13.082] ukiOpenByBusid: ukiOpenMinor returns 11
[    13.082] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    13.082] ukiOpenDevice: node name is /dev/ati/card1

 

Edited by Uliss
Link to comment
Share on other sites
ga6iem Новичок

ga6iem

Posted
  • Author
Posted (edited)

Смущает этот кусок dmesg

 

cat ./dmesg | grep conflict
[    8.857024] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    8.857031] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
[    8.857033] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 2 (20130517/utaddress-251)
[    8.857035] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 3 (20130517/utaddress-251)
[    8.857037] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
[    8.857039] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 2 (20130517/utaddress-251)
[    8.857041] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 3 (20130517/utaddress-251)
[    8.857043] lpc_ich: Resource conflict(s) found affecting gpio_ich
 

Может быть проблема в ядре? (3.11.0-18-generic)

У кого стабильно работает < 2 GPU на 13.10 убунте?

Edited by ga6iem
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Similar Topics

    • nuxhash для Linux Ubuntu

      у меня почемуто не хочет работать nuxhash для linux ubuntu. При команде nuxhashd высвечивается следующее:  Traceback (most recent call last):   File "/usr/local/bin/nuxhashd", line 8, in <module>     sys.exit(nuxhashd())   File "/usr/local/lib/python3.8/dist-packages/nuxhash/__init__.py", line 3, in nuxhashd     main()   File "/usr/local/lib/python3.8/dist-packages/nuxhash/daemon.py", line 103, in main     nx_benchmarks = run_missing_benchmarks(   File "/usr/local/lib/py

      in Программы для майнинга

    • Проблема при переводе рига на ubuntu 18.04

      Добрый день, товарищи. Нужен ваш совет. История моя такова: изначально на риге из 13-и 574 карт стояла ubuntu 16.04. Драйвера 17.50 c опциями --opencl=legacy --headless. В grub прописывал GRUB_CMDLINE_LINUX_DEFAULT="text".  Был сделан автологин в консоль. Риг работал/перезагружался полностью удаленно через putty. К ригу не был подключен монитор/заглушка.    Собственно неделю назад после аварийного отключения питания начал получать ошибку Segmentation fault (core dumped). Удаленно решит

      in Общие вопросы по майнингу

    • Ubuntu опасна, как и Windows. Так доказал ютубер Gennady M

      Я пробовал много систем. Очень понравился DEEPIN, но из-за симпатичности и работоспособности. Более практичные дистрибутивы встречал у manjaro, solus, ubuntu. Пока остановился на SOLUS, но как-то тянет на ubuntu т.к. там изначально можно поставить минимальный набор программ. А вот после ролика "Как вы потеряете все биткоины" на канале Gennady M... слов нет. Тут надо систему себе из железок до 2006 года собрать и линукс накатить не от canonical. Я не специалист в железках, программах, но и ведущи

      in Флейм

    • Mining Beam | Linux | Ubuntu

      Запустил ноду, майнер. Копает уже 10 дней. На кошелек. Все под Ubuntu 16.04 LTS. Все запущено согласно официальной документации.  Синхронизирую кошелек. Баланс- ноль. В чем проблема? Сталкивался кто нибудь?

      in Общие вопросы по майнингу

    • Велика ли разница в уязвимости Windows 7 и Ubuntu, если только синхронизировать кошельки и отправлять/получать монетки?

      У меня отдельно выделенная машина под криптовалюты. Стоит зашифрованная Ubuntu 18.10 с холодными кошельками. На ней я мониторю приход и отправку криптовалюты. Никаких браузеров, антивирусов и файерволов. Работу с биржами осуществляю с линукса, но с флешки(Live CD) на обычном пк, который идёт под всякие нужды(работа/игрушки/фильмы/сёрфинг/общение). Правда, в BIOS я отключаю SSD и HDD перед загрузкой Live CD.  Но вот столкнулся с кошельком криптовалюты ADA, который называется Daedalus. Затруд

      in Безопасность

Ресурсы

Крипто новости
Мониторинг обменников
Календарь мероприятий
Калькулятор майнинга
Блоги

О Форуме

Правила форума
Администрация
Поиск по форуму
Файлы
Замечания и предложения

Соц.сети

Twitter
Facebook
VKontakte
Telegram
YouTube

Почта

Администратор
Реклама на Bits.media
Редакция Bits.media
Мониторинг обменников
События и мероприятия
×
×
  • Create New...