Jump to content
Hlorofos

Whatsminer M3

Hlorofos

Все полезные ссылки и FAQ можно найти в первом сообщении. Прежде чем задать вопрос, посмотрите там .

Message added by Hlorofos

Recommended Posts

Только что, kksrs сказал:

а какой смысл за такие деньги... 

Согласен! я ему так же и ответил

 

Share this post


Link to post
Share on other sites

8000 стоит б/у рабочий с питателем на авито

 в новосибе платы по 2000р продают.

можешь попробовать договориться с отправкой

6900 - 3 лезвия + мать  М3х сегодня видел на авито

Edited by Traktor13

Share this post


Link to post
Share on other sites

Я могу полностью рабочий м3 за 5000 руб отдать, если кому надо, 2 шт есть.

Share this post


Link to post
Share on other sites
9 часов назад, Figist сказал:

Я могу полностью рабочий м3 за 5000 руб отдать, если кому надо, 2 шт есть.

А пересылка в Краснодарский край интересно по деньгам сколько обойдётся.

Share this post


Link to post
Share on other sites

Можно посчитать на сайте сдек 

Share this post


Link to post
Share on other sites

Ага 3600 + 20% выходит из Иркутской области в Краснодарский край

Share this post


Link to post
Share on other sites

Ребята подскажите пожалуйста, почему нельзя скачать лоупауэр прошивку для  Whatsminer M3, гугл ругается,что файл заражен вирусом и не дает скачать...☹️

Share this post


Link to post
Share on other sites
28.03.2019 в 21:02, Вова Пустов сказал:

Ребята подскажите пожалуйста, почему нельзя скачать лоупауэр прошивку для  Whatsminer M3, гугл ругается,что файл заражен вирусом и не дает скачать...☹️

Через Гугл диск сделай копию на свой . Вот её можно будет скачать.

Share this post


Link to post
Share on other sites

Добрый вечер! Подскажите пожалуйста, достались мне 2 новых контрольки от М3 на чипе H3 ревизии V6C, предыдущий хозяин я как понял пытался ее прошить, но прошил левой прошивкой. Я прошил их через SDCard прошивкой с сайта pangolinminer, одна плата заработала без проблем, вторая не заводится - горят оба диода( красный+зеленый), в сети ее не видно. С помощью UART получил вот такой лог:

Цитата

[      0.252]MODE

U-Boot 2011.09-rc1-00000-g7f4f26d-dirty (Oct 27 2017 - 16:37:23) Allwinner Technology

[      0.261]version: 1.1.0
[      0.264]uboot commit : 7f4f26db9099a59cd24351e2e09e1d3601ddd288

not using multi config
ready
no key input
dram_para_set start
dram_para_set end
user_gpio config
user_gpio ok
In:    Out:   Err:   ▒▒▒▒▒▒▒▒▒[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.39 ([email protected]) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #23 SMP PREEMPT Tue Nov 28 18:55:03 HKT 2017
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Sun-8i
[    0.000000] Initialized persistent memory from 430a0000-430affff
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c078af40, node_mem_map c0809000
[    0.000000]   Normal zone: 576 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64960 pages, LIFO batch:15
[    0.000000] script_init enter!
[    0.000000] script_init exit!
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0a5a000 s11712 r8192 d12864 u32768
[    0.000000] pcpu-alloc: s11712 r8192 d12864 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nandd init=/init isolcpus=1,2,3 loglevel=8 [email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected] mac_addr=c2:04:28:00:89:83 specialstr= serialno= boot_part=boot
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 250888k/250888k available, 11256k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05e0b9c   (5987 kB)
[    0.000000]       .init : 0xc05e1000 - 0xc0738dc0   (1376 kB)
[    0.000000]       .data : 0xc073a000 - 0xc0793790   ( 358 kB)
[    0.000000]        .bss : 0xc0793f44 - 0xc0808c68   ( 468 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:544
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.000206] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[    0.000230] pid_max: default: 32768 minimum: 301
[    0.000425] Mount-cache hash table entries: 512
[    0.001433] Initializing cgroup subsys cpuacct
[    0.001449] Initializing cgroup subsys freezer
[    0.001486] CPU: Testing write buffer coherency: ok
[    0.001539] ftrace: allocating 15131 entries in 45 pages
[    0.020299] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.020317] [sunxi_smp_prepare_cpus] enter
[    0.020359] Setting up static identity map for 0x40412b40 - 0x40412b98
[    0.021267] CPU1: Booted secondary processor
[    0.021267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.021404] CPU2: Booted secondary processor
[    0.021404] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.021404] CPU3: Booted secondary processor
[    0.021404] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.030078] Brought up 4 CPUs
[    0.030096] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[    0.031002] devtmpfs: initialized
[    0.034713] wakeup src cnt is : 1.
[    0.034725] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[    0.034736] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x40
[    0.034748] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[    0.034759] sunxi pm init
[    0.034888] pinctrl core: initialized pinctrl subsystem
[    0.035214] NET: Registered protocol family 16
[    0.036653] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.036691] script_sysfs_init success
[    0.036720] sunxi_dump_init success
[    0.037546] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[    0.040486] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[    0.041120] pca954x devices registered
[    0.041133] tmp423(index 0) registered
[    0.041143] tmp423(index 1) registered
[    0.041152] tmp423(index 2) registered
[    0.041161] tmp423(index 3) registered
[    0.041168] tmp423(index 4) registered
[    0.041176] tmp423(index 5) registered
[    0.041185] lm75 devices registered
[    0.041193] tmp421 devices registered
[    0.041203] eeprom device for board version registered
[    0.041213] eeprom device for power registered
[    0.041412] persistent_ram: uncorrectable error in header
[    0.041424] persistent_ram: no valid data in buffer (sig = 0xffffffff)
[    0.049740] console [ram-1] enabled
[    0.049893] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.049969] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.050462] sunxi_default_clk_init
[    0.050539] try to set pll6ahb1 to 200000000
[    0.050710] try to set ahb clk source to pll6ahb1
[    0.050784] set ahb clk source to pll6ahb1
<6>[    0.050867] set apb2 to low freq 1.2 Mhz
[    0.051014] set ahb clk source to pll_periph0
[    0.051087] recove apb2 to pre freq 24000000
[    0.051164] try to set ahb1 to 200000000
[    0.051308] try to set apb1 to 100000000
[    0.051390] script config apb2 to 32 Mhz
[    0.054997] bio: create slab <bio-0> at 0
[    0.055382] [ARISC] :sunxi-arisc driver v1.04
[    0.072847] [ARISC] :arisc version: [v0.1.58.3]
[    0.147424] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
[    0.149002] twi_chan_cfg()340 - [twi0] has no twi_regulator.
[    0.149139] twi_chan_cfg()340 - [twi1] has no twi_regulator.
[    0.149216] twi_chan_cfg()340 - [twi2] has no twi_regulator.
[    0.151664] Switching to clocksource arch_sys_counter
[    0.162255] FS-Cache: Loaded
[    0.162630] CacheFiles: Loaded
[    0.172390] NET: Registered protocol family 2
[    0.172746] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.173410] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.173625] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
[    0.173875] TCP: Hash tables configured (established 8192 bind 8192)
[    0.173952] TCP: reno registered
[    0.174085] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    0.174177] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    0.174589] NET: Registered protocol family 1
[    0.746905] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
[    0.747166] sunxi_reg_init enter
[    0.748056] audit: initializing netlink socket (disabled)
[    0.748191] type=2000 audit(0.740:1): initialized
[    0.750272] NTFS driver 2.1.30 [Flags: R/W].
[    0.750449] fuse init (API version 7.18)
[    0.751009] msgmni has been set to 490
[    0.752355] io scheduler noop registered
[    0.752435] io scheduler deadline registered
[    0.752625] io scheduler cfq registered (default)
[    0.753100] this module is used not!
[    0.753178] gpio_init finish with uesd 0!
[    0.753501] sw_uart_get_devinfo()1502 - uart0 has no uart_regulator.
[    0.753583] sw_uart_get_devinfo()1502 - uart1 has no uart_regulator.
[    0.753720] sw_uart_get_devinfo()1502 - uart2 has no uart_regulator.
[    0.753798] sw_uart_get_devinfo()1502 - uart3 has no uart_regulator.
[    0.754491] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.754628] sw_uart_pm()889 - uart0 clk is already enable
[    0.754713] sw_console_setup()1232 - console setup baud 115200 parity n bits 8, flow n
[    0.944385] console [ttyS0] enabled
[    1.578558] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[    1.585492] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[    1.592470] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
[    1.603814] loop: module loaded
[    1.607711] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x50)
[    1.630265] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x50)
[    1.650049] at24: probe of 0-0050 failed with error -110
[    1.656257] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x51)
[    1.680275] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x51)
[    1.700041] at24: probe of 0-0051 failed with error -110
[    1.706249] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x52)
[    1.730271] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x52)
[    1.750040] at24: probe of 0-0052 failed with error -110
[    1.756553] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x28)
[    1.780273] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x28)
[    1.800226] at24: probe of 2-0028 failed with error -110
[    1.806228] tun: Universal TUN/TAP device driver, 1.6
[    1.811836] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.819608] PPP generic driver version 2.4.2
[    1.824577] PPP BSD Compression module registered
[    1.829784] PPP Deflate Compression module registered
[    1.837921] PPP MPPE Compression module registered
[    1.843283] NET: Registered protocol family 24
[    1.848301] PPTP driver version 0.8.5
[    1.852791]  uinput result 0 , vmouse_init
[    1.857981] [RTC] WARNING: Rtc time will be wrong!!
[    1.863507] [RTC] WARNING: use *internal OSC* as clock source
[    1.870182] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[    1.877590] i2c /dev entries driver
[    1.882106] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x70)
[    1.891293] pca954x 0-0070: probe failed
[    1.895929] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x71)
[    1.905153] pca954x 0-0071: probe failed
[    1.909785] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x72)
[    1.918966] pca954x 0-0072: probe failed
[    1.923657] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48)
[    1.933076] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48)
[    1.942295] lm75: reading conf reg error -70, retry 0
[    1.948120] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48)
[    1.957332] lm75: reading conf reg error -70, retry 1
[    1.963170] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48)
[    1.972375] lm75: reading conf reg error -70, retry 2
[    1.978027] lm75: probe of 0-0048 failed with error -5
[    1.984005] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x49)
[    1.993424] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x49)
[    2.002584] lm75: reading conf reg error -70, retry 0
[    2.008412] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x49)
[    2.017620] lm75: reading conf reg error -70, retry 1
[    2.023462] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x49)
[    2.032668] lm75: reading conf reg error -70, retry 2
[    2.038261] lm75: probe of 0-0049 failed with error -5
[    2.044520] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4a)
[    2.053888] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4a)
[    2.063098] lm75: reading conf reg error -70, retry 0
[    2.068983] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4a)
[    2.078136] lm75: reading conf reg error -70, retry 1
[    2.084034] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4a)
[    2.093243] lm75: reading conf reg error -70, retry 2
[    2.098838] lm75: probe of 0-004a failed with error -5
[    2.104849] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4b)
[    2.114306] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    2.123769] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4f)
[    2.133229] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[    2.142621] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x49)
[    2.152071] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4a)
[    2.161522] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4b)
[    2.170971] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    2.180368] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4d)
[    2.189801] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4e)
[    2.199249] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4f)
[    2.208738] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    2.218152] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d)
[    2.227624] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e)
[    2.237117] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a)
[    2.246514] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    2.255918] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4f)
[    2.265373] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x2a)
[    2.274824] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    2.284213] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4d)
[    2.293664] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4e)
[    2.303116] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4f)
[    2.312328] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[    2.319441] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[    2.330644] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[    2.338186] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[    2.344388] timeout_to_interv, line 167
[    2.348643] interv_to_timeout, line 189
[    2.352915] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[    2.362368] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    2.371867] calibrat: max_cpufreq 1008Mhz Type 1!
[    2.377137] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[    2.386263] [cpu_freq] ERR:cpu boot frequency can not be more than cpu max frequency
[    2.394871] [cpu_freq] ERR:sunxi_cpufreq_initcall, use default cpu max/min frequency, max freq: 1536MHz, min freq: 60MHz
[    2.408530] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.121 2016-08-3 16:46) Compiled in Sep 14 2017 at 15:06:46
[    2.419853] [mmc]: get mmc0's sdc_power is null!
[    2.424964] [mmc]: get mmc1's sdc_power is null!
[    2.430096] [mmc]: get mmc1's 2xmode ok, val = 1
[    2.435179] [mmc]: get mmc1's ddrmode ok, val = 1
[    2.440411] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
[    2.447987] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    2.460647] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    2.473159] Set the period of fan's htimer to 0us
[    2.478439] oprofile: using arm/armv7-ca7
[    2.483040] u32 classifier
[    2.486030]     Actions configured
[    2.489788] Netfilter messages via NETLINK v0.30.
[    2.495077] nf_conntrack version 0.5.0 (3920 buckets, 15680 max)
[    2.501983] ctnetlink v0.93: registering with nfnetlink.
[    2.507892] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    2.515563] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    2.522261] xt_time: kernel timezone is -0000
[    2.527185] IPv4 over IPv4 tunneling driver
[    2.532156] gre: GRE over IPv4 demultiplexor driver
[    2.537551] ip_gre: GRE over IPv4 tunneling driver
[    2.543331] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.549359] arp_tables: (C) 2002 David S. Miller
[    2.554504] TCP: cubic registered
[    2.558169] Initializing XFRM netlink socket
[    2.562941] NET: Registered protocol family 17
[    2.567855] NET: Registered protocol family 15
[    2.572804] L2TP core driver, V2.0
[    2.576570] PPPoL2TP kernel driver, V2.0
[    2.580906] L2TP IP encapsulation support (L2TPv3)
[    2.586246] L2TP netlink interface
[    2.590035] L2TP ethernet pseudowire support (L2TPv3)
[    2.595685] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    2.604198] ThumbEE CPU extension supported.
[    2.608918] Registering SWP/SWPB emulation handler
[    2.614907] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:11 UTC (11)
[    2.623574] ths_fetch_sysconfig_para: type err  device_used = 1.
[    2.631373] CPU Budget:Register notifier
[    2.635707] CPU Budget:register Success
[    2.639979] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
Begin to load ramdisk:/init
[    2.653387] Freeing init memory: 1372K
[/init]: RootDevice is "/dev/nandd"
[/init]: Try to load Nand ...
[    2.690419] [NAND]nand init start, nand0_used_flag is 1
[    2.696218] [NAND]nand init start
[    2.699925] nand:get voltage axp22_dcdc1 ok:0
[    2.705245] physic_info_read start!!
[    2.713376] kernel: nand version: 3 6014 20170817 1826
[    2.732918] [ND]boot start
[    2.736079]  check boot start.
[    2.741056] find a bad block: 0 12 0 sdata: 00 78 69 87
[    2.794427] find a bad block: 0 12 0 sdata: 00 78 69 87
[    2.833238] find a bad block: 0 12 0 sdata: 00 78 69 87
[    2.907018] find a bad block: 0 12 0 sdata: 00 78 69 87
[    2.982621] find a bad block: 0 12 0 sdata: 00 78 69 87
[    3.059192]  check boot  end.
[    3.429817] [NE]recover_phy_page_mapping no used page 55!!
[    3.435916] [NE]erase_block block 675!
[    3.478863] [NE] adjust free list : 675 1!!
[    3.483487] [ND]free block nums is 676 !
[    3.487816] [NE]not power on gc 676!
[    3.491807] [ND]nftl ok!
[    3.495721]  nanda:
[    3.499644]  nandb: unknown partition table
[    3.505800]  nandc: unknown partition table
[    3.511972]  nandd: unknown partition table
[    3.518060]  nande: unknown partition table
[    3.524194]  nandf: unknown partition table
[    3.530238]  nandg: unknown partition table
[    3.535523]  nandh: unknown partition table
[    3.540888]  nandi: unknown partition table
[    3.545746] [NAND]nand init end
/dev/nandd already has journal
e2fsck -y /dev/nandd
e2fsck 1.43.1 (08-Jun-2016)
/dev/nandd: clean, 1152/6000 fil[    3.570615] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
es, 4697/12288 blocks
mount /dev/nandd on /root temporarily
[    3.592374] EXT4-fs (nandd): mounted filesystem with journalled data mode. Opts: data=journal
check partition /dev/nandf
e2fsck 1.43.1 (08-Jun-2016)
/dev/nandf: clean, 209/2048 files, 1779/4096 blocks
is_critical_data_files_ok /dev/nandf
mount[    3.617310] EXT4-fs (nandf): mounted filesystem with journalled data mode. Opts: data=journal
 /dev/nandf on /mnt
Critical files exist
[    3.690019] Unable to handle kernel paging request at virtual address 40a727c0
[    3.697942] pgd = c0004000
[    3.700003] [40a727c0] *pgd=00000000
[    3.700003] sunxi oops: enable sdcard JTAG interface
[    3.700003] sunxi oops: cpu frequency: 1536 MHz
[    3.700003] sunxi oops: ddr frequency: 576 MHz
[    3.700003] sunxi oops: gpu frequency: 105 MHz
[    3.700003] sunxi oops: cpu temperature: 32
[    3.700003] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[    3.700003] Modules linked in: nand(O)
[    3.700003] CPU: 3    Tainted: G           O  (3.4.39 #23)
[    3.700003] PC is at __raw_spin_lock+0x34/0x9c
[    3.700003] LR is at _raw_spin_lock+0x18/0x1c
[    3.700003] pc : [<c0412530>]    lr : [<c04125b0>]    psr: 60000193
[    3.700003] sp : cf8c7df0  ip : cf8c7e10  fp : cf8c7e0c
[    3.700003] r10: c0074430  r9 : 40a727c0  r8 : 00000001
[    3.700003] r7 : 00000000  r6 : 00000001  r5 : 40a727c0  r4 : cf8c6000
[    3.700003] r3 : 00010002  r2 : c078bcbc  r1 : 00000000  r0 : 40a727c0
[    3.700003] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    3.700003] Control: 10c5387d  Table: 4000406a  DAC: 00000015
[    3.700003]
[    3.700003] PC: 0xc04124b0:
[    3.700003] 24b0  e3a01102 e1902f9f e3320000 01802f91 e3520000 1a000002 f57ff05f e3a00001
[    3.700003] 24d0  e89da800 e5932004 e2422001 e5832004 e5930000 e7e000d0 e3500000 089da800
[    3.700003] 24f0  ebfffbb4 e3a00000 e89da800 e1a0c00d e92dd878 e24cb004 e92d4000 e8bd4000
[    3.700003] 2510  e1a0300d e1a05000 e3c34d7f e3a06001 e3c4403f e5943004 e2833001 e5843004
[    3.700003] 2530  e1953f9f e3330000 01853f96 e3530000 1a000002 f57ff05f e5853004 e89da878
[    3.700003] 2550  e5943004 e2433001 e5843004 e5943000 e3130002 0a000000 ebfffb96 e5953004
[    3.700003] 2570  e3530000 05856004 eaffffff e5953000 e3530000 0affffe6 e5953004 e3530000
[    3.700003] 2590  1afffff9 eaffffe2 e1a0c00d e92dd800 e24cb004 e92d4000 e8bd4000 ebffffd2
[    3.700003]
[    3.700003] LR: 0xc0412530:
[    3.700003] 2530  e1953f9f e3330000 01853f96 e3530000 1a000002 f57ff05f e5853004 e89da878
[    3.700003] 2550  e5943004 e2433001 e5843004 e5943000 e3130002 0a000000 ebfffb96 e5953004
[    3.700003] 2570  e3530000 05856004 eaffffff e5953000 e3530000 0affffe6 e5953004 e3530000
[    3.700003] 2590  1afffff9 eaffffe2 e1a0c00d e92dd800 e24cb004 e92d4000 e8bd4000 ebffffd2
[    3.700003] 25b0  e89da800 e1a0c00d e92dd878 e24cb004 e92d4000 e8bd4000 e1a0300d e1a05000
[    3.700003] 25d0  e3c34d7f e3a06001 e3c4403f e5943004 e2833001 e5843004 e10f0000 f10c0080
[    3.700003] 25f0  e1953f9f e3330000 01853f96 e3530000 1a000002 f57ff05f e5853004 e89da878
[    3.700003] 2610  e121f000 e5943004 e2433001 e5843004 e5943000 e3130002 0a000000 ebfffb65
[    3.700003]
[    3.700003] SP: 0xcf8c7d70:
[    3.700003] 7d70  00000000 c0a72948 00000000 00989680 cf8c7de4 cf8c7d90 c0412530 60000193
[    3.700003] 7d90  ffffffff cf8c7ddc cf8c7e0c cf8c7da8 c000e458 c0008368 40a727c0 00000000
[    3.700003] 7db0  c078bcbc 00010002 cf8c6000 40a727c0 00000001 00000000 00000001 40a727c0
[    3.700003] 7dd0  c0074430 cf8c7e0c cf8c7e10 cf8c7df0 c04125b0 c0412530 60000193 ffffffff
[    3.700003] 7df0  00000000 c0a72948 c0a727f8 c0a727c0 cf8c7e1c cf8c7e10 c04125b0 c0412508
[    3.700003] 7e10  cf8c7e5c cf8c7e20 c004c8fc c04125a4 00058948 00000000 2160ec02 cf8c7e90
[    3.700003] 7e30  00000007 dbf0ee80 00000000 c0a727c0 00000000 c0a727f8 00000001 c0a72860
[    3.700003] 7e50  cf8c7ec4 cf8c7e60 c004d4f0 c004c6b8 c0738c00 00000038 c0a72898 00000003
[    3.700003]
[    3.700003] IP: 0xcf8c7d90:
[    3.700003] 7d90  ffffffff cf8c7ddc cf8c7e0c cf8c7da8 c000e458 c0008368 40a727c0 00000000
[    3.700003] 7db0  c078bcbc 00010002 cf8c6000 40a727c0 00000001 00000000 00000001 40a727c0
[    3.700003] 7dd0  c0074430 cf8c7e0c cf8c7e10 cf8c7df0 c04125b0 c0412530 60000193 ffffffff
[    3.700003] 7df0  00000000 c0a72948 c0a727f8 c0a727c0 cf8c7e1c cf8c7e10 c04125b0 c0412508
[    3.700003] 7e10  cf8c7e5c cf8c7e20 c004c8fc c04125a4 00058948 00000000 2160ec02 cf8c7e90
[    3.700003] 7e30  00000007 dbf0ee80 00000000 c0a727c0 00000000 c0a727f8 00000001 c0a72860
[    3.700003] 7e50  cf8c7ec4 cf8c7e60 c004d4f0 c004c6b8 c0738c00 00000038 c0a72898 00000003
[    3.700003] 7e70  dbf0f5ae 00000000 ffffffff 7fffffff dbf0f5ae 00000000 dbf0f5ae 00000000
[    3.700003]
[    3.700003] FP: 0xcf8c7d8c:
[    3.700003] 7d8c  60000193 ffffffff cf8c7ddc cf8c7e0c cf8c7da8 c000e458 c0008368 40a727c0
[    3.700003] 7dac  00000000 c078bcbc 00010002 cf8c6000 40a727c0 00000001 00000000 00000001
[    3.700003] 7dcc  40a727c0 c0074430 cf8c7e0c cf8c7e10 cf8c7df0 c04125b0 c0412530 60000193
[    3.700003] 7dec  ffffffff 00000000 c0a72948 c0a727f8 c0a727c0 cf8c7e1c cf8c7e10 c04125b0
[    3.700003] 7e0c  c0412508 cf8c7e5c cf8c7e20 c004c8fc c04125a4 00058948 00000000 2160ec02
[    3.700003] 7e2c  cf8c7e90 00000007 dbf0ee80 00000000 c0a727c0 00000000 c0a727f8 00000001
[    3.700003] 7e4c  c0a72860 cf8c7ec4 cf8c7e60 c004d4f0 c004c6b8 c0738c00 00000038 c0a72898
[    3.700003] 7e6c  00000003 dbf0f5ae 00000000 ffffffff 7fffffff dbf0f5ae 00000000 dbf0f5ae
[    3.700003]
[    3.700003] R2: 0xc078bc3c:
[    3.700003] bc3c  00000000 00000000 c055b91a 00000000 00000000 00000000 00000000 c055b908
[    3.700003] bc5c  00000000 00000000 00000000 00000000 c055b92d 00000000 00000000 00000000
[    3.700003] bc7c  00000000 c055b88d 00000000 00000000 00000000 00000000 c055b89b 00000000
[    3.700003] bc9c  00000000 00000000 00000000 c055b8a8 00000000 00000000 00000000 00000000
[    3.700003] bcbc  c055b8b7 00000000 00000000 00000000 00000000 c055b8cb 00000000 00000000
[    3.700003] bcdc  00000000 00000000 c055b8e0 00000000 00000000 00000000 00000000 c055b8ee
[    3.700003] bcfc  00000000 00000000 00000000 00000000 c055b953 00000000 00000000 00000000
[    3.700003] bd1c  00000000 c055b944 00000000 00000000 00000000 00000000 c055b991 00000000
[    3.700003]
[    3.700003] R4: 0xcf8c5f80:
[    3.700003] 5f80  c002eda8 c0411704 00000000 cf833e90 00000003 c002ed30 00000013 00000000
[    3.700003] 5fa0  00000000 00000000 cf8c5ff4 cf8c5fb8 c004863c c002ed3c 00000000 00000000
[    3.700003] 5fc0  00000003 00000000 00000000 00000000 cf8c5fd0 cf8c5fd0 00000000 cf833e90
[    3.700003] 5fe0  c00485a0 c000fa00 00000000 cf8c5ff8 c000fa00 c00485ac ffffffff ffffffff
[    3.700003] 6000  00000000 00010004 00000000 cf8b0040 c0765940 00000003 00000015 cf8b0040
[    3.700003] 6020  cf8c6000 c0a74680 00000000 c076e564 00000000 cf8b0ac0 cf8c7f8c cf8c7ef0
[    3.700003] 6040  c0411238 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.700003] 6060  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.700003]
[    3.700003] R10: 0xc00743b0:
[    3.700003] 43b0  e313000f 13a00000 03a00001 ebff0da3 e3a00001 ebffdfa5 ea000006 e24b002c
[    3.700003] 43d0  ebffe28d e51b602c e51b5028 e1a00006 e1a01005 ebffff80 e1c720d0 e1a00004
[    3.700003] 43f0  e1cd20f0 e1a02006 e1a03005 ebff61f2 e1c401d0 e3a02000 ebfffeba e3500000
[    3.700003] 4410  1affffed e24bd024 e89dadf0 c075d470 c0736948 c0738188 c075c29c c07a7390
[    3.700003] 4430  e1a0c00d e92dd9f0 e24cb004 e24dd014 e92d4000 e8bd4000 e1a0200d e3c28d7f
[    3.700003] 4450  e59f20ac e3c8803f e1a06000 e5981014 e24b002c e59f309c e7922101 e7937002
[    3.700003] 4470  ebffe265 e59f2090 e5983014 e14b42dc e5921000 e3710001 05823000 e5922000
[    3.700003] 4490  e1520003 1a000002 e1a00004 e1a01005 ebffff51 e3570000 0a00000b e596305c
[    3.700003] Process swapper/3 (pid: 0, stack limit = 0xcf8c62f8)
[    3.700003] Stack: (0xcf8c7df0 to 0xcf8c8000)
[    3.700003] 7de0:                                     00000000 c0a72948 c0a727f8 c0a727c0
[    3.700003] 7e00: cf8c7e1c cf8c7e10 c04125b0 c0412508 cf8c7e5c cf8c7e20 c004c8fc c04125a4
[    3.700003] 7e20: 00058948 00000000 2160ec02 cf8c7e90 00000007 dbf0ee80 00000000 c0a727c0
[    3.700003] 7e40: 00000000 c0a727f8 00000001 c0a72860 cf8c7ec4 cf8c7e60 c004d4f0 c004c6b8
[    3.700003] 7e60: c0738c00 00000038 c0a72898 00000003 dbf0f5ae 00000000 ffffffff 7fffffff
[    3.700003] 7e80: dbf0f5ae 00000000 dbf0f5ae 00000000 dbf0f5ae 00000000 00000000 c0a77740
[    3.700003] 7ea0: cf80c540 c073d7c0 cf8c7f94 0000001d 410fc075 c076515c cf8c7edc cf8c7ec8
[    3.700003] 7ec0: c0015870 c004d3c8 c001582c 0000001d cf8c7f14 cf8c7ee0 c009667c c0015838
[    3.700003] 7ee0: c0074f60 c0a77740 cf8c6000 0000001d 00000000 c075bca0 cf8c7f94 4000406a
[    3.700003] 7f00: 410fc075 00000000 cf8c7f24 cf8c7f18 c0092b68 c0096560 cf8c7f3c cf8c7f28
[    3.700003] 7f20: c000f904 c0092b38 f1c82000 cf8c7f60 cf8c7f5c cf8c7f40 c000852c c000f888
[    3.700003] 7f40: c000fac0 c000fac4 60000013 ffffffff cf8c7fb4 cf8c7f60 c000e4c0 c00084f4
[    3.700003] 7f60: c0a72ad0 00000000 000000ec 00000000 cf8c6000 c0764290 c0794048 c0794304
[    3.700003] 7f80: 4000406a 410fc075 00000000 cf8c7fb4 cf8c7fb8 cf8c7fa8 c000fac0 c000fac4
[    3.700003] 7fa0: 60000013 ffffffff cf8c7fd4 cf8c7fb8 c000feb8 c000fa9c 00000000 c076e564
[    3.700003] 7fc0: 00000003 cf8c6000 cf8c7ff4 cf8c7fd8 c0601368 c000fe58 c0600a9c 4f87406a
[    3.700003] 7fe0: 00000015 10c0387d 00000000 cf8c7ff8 40600ab4 c060126c ffffffff ffffffff
[    3.700003] [<c0412530>] (__raw_spin_lock+0x34/0x9c) from [<c04125b0>] (_raw_spin_lock+0x18/0x1c)
[    3.700003] [<c04125b0>] (_raw_spin_lock+0x18/0x1c) from [<c004c8fc>] (__run_hrtimer+0x250/0x2d0)
[    3.700003] [<c004c8fc>] (__run_hrtimer+0x250/0x2d0) from [<c004d4f0>] (hrtimer_interrupt+0x134/0x29c)
[    3.700003] [<c004d4f0>] (hrtimer_interrupt+0x134/0x29c) from [<c0015870>] (arch_timer_handler+0x44/0x4c)
[    3.700003] [<c0015870>] (arch_timer_handler+0x44/0x4c) from [<c009667c>] (handle_percpu_devid_irq+0x128/0x1f4)
[    3.700003] [<c009667c>] (handle_percpu_devid_irq+0x128/0x1f4) from [<c0092b68>] (generic_handle_irq+0x3c/0x50)
[    3.700003] [<c0092b68>] (generic_handle_irq+0x3c/0x50) from [<c000f904>] (handle_IRQ+0x88/0xc8)
[    3.700003] [<c000f904>] (handle_IRQ+0x88/0xc8) from [<c000852c>] (gic_handle_irq+0x44/0x68)
[    3.700003] [<c000852c>] (gic_handle_irq+0x44/0x68) from [<c000e4c0>] (__irq_svc+0x40/0x70)
[    3.700003] Exception stack(0xcf8c7f60 to 0xcf8c7fa8)
[    3.700003] 7f60: c0a72ad0 00000000 000000ec 00000000 cf8c6000 c0764290 c0794048 c0794304
[    3.700003] 7f80: 4000406a 410fc075 00000000 cf8c7fb4 cf8c7fb8 cf8c7fa8 c000fac0 c000fac4
[    3.700003] 7fa0: 60000013 ffffffff
[    3.700003] [<c000e4c0>] (__irq_svc+0x40/0x70) from [<c000fac4>] (default_idle+0x34/0x3c)
[    3.700003] [<c000fac4>] (default_idle+0x34/0x3c) from [<c000feb8>] (cpu_idle+0x6c/0xbc)
[    3.700003] [<c000feb8>] (cpu_idle+0x6c/0xbc) from [<c0601368>] (secondary_start_kernel+0x108/0x12c)
[    3.700003] Code: e3c4403f e5943004 e2833001 e5843004 (e1953f9f)
[    3.700003] ---[ end trace 07c4e9f1174ab3a9 ]---
[    3.700003] Kernel panic - not syncing: Fatal exception in interrupt
[    4.772694] CPU2: stopping
[    4.775702] [<c00170cc>] (unwind_backtrace+0x0/0x128) from [<c040b178>] (dump_stack+0x20/0x24)
[    4.782690] [<c040b178>] (dump_stack+0x20/0x24) from [<c0014c18>] (handle_IPI+0x174/0x2fc)
[    4.782690] [<c0014c18>] (handle_IPI+0x174/0x2fc) from [<c0008548>] (gic_handle_irq+0x60/0x68)
[    4.782690] [<c0008548>] (gic_handle_irq+0x60/0x68) from [<c000e4c0>] (__irq_svc+0x40/0x70)
[    4.782690] Exception stack(0xcf8bdf60 to 0xcf8bdfa8)
[    4.782690] df60: c0a6aad0 00000000 000000ec 00000000 cf8bc000 c0764290 c0794048 c0794304
[    4.782690] df80: 4000406a 410fc075 00000000 cf8bdfb4 cf8bdfb8 cf8bdfa8 c000fac0 c000fac4
[    4.782690] dfa0: 60000053 ffffffff
[    4.782690] [<c000e4c0>] (__irq_svc+0x40/0x70) from [<c000fac4>] (default_idle+0x34/0x3c)
[    4.782690] [<c000fac4>] (default_idle+0x34/0x3c) from [<c000feb8>] (cpu_idle+0x6c/0xbc)
[    4.782690] [<c000feb8>] (cpu_idle+0x6c/0xbc) from [<c0601368>] (secondary_start_kernel+0x108/0x12c)
[    4.782691] CPU0: stopping
[    4.782691] [<c00170cc>] (unwind_backtrace+0x0/0x128) from [<c040b178>] (dump_stack+0x20/0x24)
[    4.782691] [<c040b178>] (dump_stack+0x20/0x24) from [<c0014c18>] (handle_IPI+0x174/0x2fc)
[    4.782691] [<c0014c18>] (handle_IPI+0x174/0x2fc) from [<c0008548>] (gic_handle_irq+0x60/0x68)
[    4.782691] [<c0008548>] (gic_handle_irq+0x60/0x68) from [<c000e4c0>] (__irq_svc+0x40/0x70)
[    4.782691] Exception stack(0xc073bf18 to 0xc073bf60)
[    4.782691] bf00:                                                       c0a5aad0 00000000
[    4.782691] bf20: 00002bfe 00000000 c073a000 c0764290 c0794048 c06072d4 c0a57e00 410fc075
[    4.782691] bf40: 00000000 c073bf6c c073bf70 c073bf60 c000fac0 c000fac4 60000013 ffffffff
[    4.782691] [<c000e4c0>] (__irq_svc+0x40/0x70) from [<c000fac4>] (default_idle+0x34/0x3c)
[    4.782691] [<c000fac4>] (default_idle+0x34/0x3c) from [<c000feb8>] (cpu_idle+0x6c/0xbc)
[    4.782691] [<c000feb8>] (cpu_idle+0x6c/0xbc) from [<c0408404>] (rest_init+0x9c/0xb8)
[    4.782691] [<c0408404>] (rest_init+0x9c/0xb8) from [<c05e1848>] (start_kernel+0x2d4/0x32c)
[    4.782690] CPU1: stopping
[    4.782690] [<c00170cc>] (unwind_backtrace+0x0/0x128) from [<c040b178>] (dump_stack+0x20/0x24)
[    4.782690] [<c040b178>] (dump_stack+0x20/0x24) from [<c0014c18>] (handle_IPI+0x174/0x2fc)
[    4.782690] [<c0014c18>] (handle_IPI+0x174/0x2fc) from [<c0008548>] (gic_handle_irq+0x60/0x68)
[    4.782690] [<c0008548>] (gic_handle_irq+0x60/0x68) from [<c000e4c0>] (__irq_svc+0x40/0x70)
[    4.782690] Exception stack(0xcf8a5f60 to 0xcf8a5fa8)
[    4.782690] 5f60: c0a62ad0 00000000 000000f6 00000000 cf8a4000 c0764290 c0794048 c0794304
[    4.782690] 5f80: 4000406a 410fc075 00000000 cf8a5fb4 cf8a5fb8 cf8a5fa8 c000fac0 c000fac4
[    4.782690] 5fa0: 60000013 ffffffff
[    4.782690] [<c000e4c0>] (__irq_svc+0x40/0x70) from [<c000fac4>] (default_idle+0x34/0x3c)
[    4.782690] [<c000fac4>] (default_idle+0x34/0x3c) from [<c000feb8>] (cpu_idle+0x6c/0xbc)
[    4.782690] [<c000feb8>] (cpu_idle+0x6c/0xbc) from [<c0601368>] (secondary_start_kernel+0x108/0x12c)
[      0.252]MODE

U-Boot 2011.09-rc1-00000-g7f4f26d-dirty (Oct 27 2017 - 16:37:23) Allwinner Techn

[      0.261]version: 1.1.0
[      0.264]uboot commit : 7f4f26db9099a59cd24351e2e09e1d3601ddd288

not using multi config
ready
no key input
dram_para_set start
dram_para_set end
user_gpio config
user_gpio ok
In:    Out:   Err:   ▒▒▒▒▒▒▒▒▒[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.39 ([email protected]) (gcc version 4.6.3 20120201 (prer
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio
[    0.000000] Machine: Sun-8i
[    0.000000] Initialized persistent memory from 430a0000-430affff
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c078af40, node_mem_map c080900
[    0.000000]   Normal zone: 576 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64960 pages, LIFO batch:15
[    0.000000] script_init enter!
[    0.000000] script_init exit!
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0a5a000 s11712 r8192 d12864 u32768
[    0.000000] pcpu-alloc: s11712 r8192 d12864 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nandd init=/idi mac_addr=c2:04:28:00:89:83 specialstr= serialno= boot_part=boot
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 250888k/250888k available, 11256k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05e0b9c   (5987 kB)
[    0.000000]       .init : 0xc05e1000 - 0xc0738dc0   (1376 kB)
[    0.000000]       .data : 0xc073a000 - 0xc0793790   ( 358 kB)
[    0.000000]        .bss : 0xc0793f44 - 0xc0808c68   ( 468 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:544
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 17895
[    0.000000] Console: colour dummy device 80x30
[    0.000203] Calibrating delay loop (skipped), value calculated using timer fr
[    0.000227] pid_max: default: 32768 minimum: 301
[    0.000430] Mount-cache hash table entries: 512
[    0.001437] Initializing cgroup subsys cpuacct
[    0.001454] Initializing cgroup subsys freezer
[    0.001492] CPU: Testing write buffer coherency: ok
[    0.001545] ftrace: allocating 15131 entries in 45 pages
[    0.020298] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.020316] [sunxi_smp_prepare_cpus] enter
[    0.020357] Setting up static identity map for 0x40412b40 - 0x40412b98
[    0.021267] CPU1: Booted secondary processor
[    0.021267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.021403] CPU2: Booted secondary processor
[    0.021403] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.021403] CPU3: Booted secondary processor
[    0.021403] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.030078] Brought up 4 CPUs
[    0.030096] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[    0.031007] devtmpfs: initialized
[    0.034716] wakeup src cnt is : 1.
[    0.034728] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800
[    0.034739] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio
[    0.034750] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio
[    0.034762] sunxi pm init
[    0.034893] pinctrl core: initialized pinctrl subsystem
[    0.035222] NET: Registered protocol family 16
[    0.036658] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.036698] script_sysfs_init success
[    0.036725] sunxi_dump_init success
[    0.037551] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[    0.040450] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[    0.041088] pca954x devices registered
[    0.041099] tmp423(index 0) registered
[    0.041107] tmp423(index 1) registered
[    0.041115] tmp423(index 2) registered
[    0.041123] tmp423(index 3) registered
[    0.041132] tmp423(index 4) registered
[    0.041140] tmp423(index 5) registered
[    0.041148] lm75 devices registered
[    0.041156] tmp421 devices registered
[    0.041166] eeprom device for board version registered
[    0.041176] eeprom device for power registered
[    0.041375] persistent_ram: uncorrectable error in header
[    0.041387] persistent_ram: no valid data in buffer (sig = 0xffffffff)
[    0.049690] console [ram-1] enabled
[    0.049842] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
[    0.049919] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.050465] sunxi_default_clk_init
[    0.050542] try to set pll6ahb1 to 200000000
[    0.050713] try to set ahb clk source to pll6ahb1
[    0.050787] set ahb clk source to pll6ahb1
<6>[    0.050871] set apb2 to low freq 1.2 Mhz
[    0.051017] set ahb clk source to pll_periph0
[    0.051090] recove apb2 to pre freq 24000000
[    0.051167] try to set ahb1 to 200000000
[    0.051310] try to set apb1 to 100000000
[    0.051392] script config apb2 to 32 Mhz
[    0.055009] bio: create slab <bio-0> at 0
[    0.055387] [ARISC] :sunxi-arisc driver v1.04
[    0.072846] [ARISC] :arisc version: [v0.1.58.3]
[    0.147377] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
[    0.148950] twi_chan_cfg()340 - [twi0] has no twi_regulator.
[    0.149085] twi_chan_cfg()340 - [twi1] has no twi_regulator.
[    0.149162] twi_chan_cfg()340 - [twi2] has no twi_regulator.
[    0.151608] Switching to clocksource arch_sys_counter
[    0.162231] FS-Cache: Loaded
[    0.162605] CacheFiles: Loaded
[    0.172357] NET: Registered protocol family 2
[    0.172714] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.173376] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.173593] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
[    0.173843] TCP: Hash tables configured (established 8192 bind 8192)
[    0.173920] TCP: reno registered
[    0.174054] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    0.174147] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    0.174565] NET: Registered protocol family 1
[    0.746879] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counter
[    0.747142] sunxi_reg_init enter
[    0.748038] audit: initializing netlink socket (disabled)
[    0.748175] type=2000 audit(0.740:1): initialized
[    0.750251] NTFS driver 2.1.30 [Flags: R/W].
[    0.750430] fuse init (API version 7.18)
[    0.750989] msgmni has been set to 490
[    0.752337] io scheduler noop registered
[    0.752415] io scheduler deadline registered
[    0.752607] io scheduler cfq registered (default)
[    0.753082] this module is used not!
[    0.753160] gpio_init finish with uesd 0!
[    0.753490] sw_uart_get_devinfo()1502 - uart0 has no uart_regulator.
[    0.753572] sw_uart_get_devinfo()1502 - uart1 has no uart_regulator.
[    0.753708] sw_uart_get_devinfo()1502 - uart2 has no uart_regulator.
[    0.753787] sw_uart_get_devinfo()1502 - uart3 has no uart_regulator.
[    0.754486] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.754623] sw_uart_pm()889 - uart0 clk is already enable
[    0.754707] sw_console_setup()1232 - console setup baud 115200 parity n bits
[    0.944383] console [ttyS0] enabled
[    1.578548] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[    1.585487] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[    1.592468] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
[    1.603804] loop: module loaded
[    1.607697] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.630264] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.650049] at24: probe of 0-0050 failed with error -110
[    1.656260] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.680275] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.700041] at24: probe of 0-0051 failed with error -110
[    1.706250] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.730271] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.750040] at24: probe of 0-0052 failed with error -110
[    1.756553] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    1.780272] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    1.800226] at24: probe of 2-0028 failed with error -110
[    1.806228] tun: Universal TUN/TAP device driver, 1.6
[    1.811833] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.819604] PPP generic driver version 2.4.2
[    1.824574] PPP BSD Compression module registered
[    1.829782] PPP Deflate Compression module registered
[    1.837939] PPP MPPE Compression module registered
[    1.843304] NET: Registered protocol family 24
[    1.848321] PPTP driver version 0.8.5
[    1.852814]  uinput result 0 , vmouse_init
[    1.858003] [RTC] WARNING: Rtc time will be wrong!!
[    1.863533] [RTC] WARNING: use *internal OSC* as clock source
[    1.870207] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[    1.877614] i2c /dev entries driver
[    1.882135] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.891321] pca954x 0-0070: probe failed
[    1.895955] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.905179] pca954x 0-0071: probe failed
[    1.909805] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.918986] pca954x 0-0072: probe failed
[    1.923675] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.933093] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.942309] lm75: reading conf reg error -70, retry 0
[    1.948134] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.957346] lm75: reading conf reg error -70, retry 1
[    1.963184] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.972392] lm75: reading conf reg error -70, retry 2
[    1.978044] lm75: probe of 0-0048 failed with error -5
[    1.984028] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    1.993448] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.002608] lm75: reading conf reg error -70, retry 0
[    2.008436] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.017648] lm75: reading conf reg error -70, retry 1
[    2.023489] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.032699] lm75: reading conf reg error -70, retry 2
[    2.038293] lm75: probe of 0-0049 failed with error -5
[    2.044546] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.053916] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.063124] lm75: reading conf reg error -70, retry 0
[    2.069010] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.078164] lm75: reading conf reg error -70, retry 1
[    2.084064] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.093275] lm75: reading conf reg error -70, retry 2
[    2.098870] lm75: probe of 0-004a failed with error -5
[    2.104876] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.114331] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.123792] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.133253] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.142646] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.152100] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.161551] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.170999] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.180391] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.189827] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.199278] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.208765] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.218183] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.227655] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.237143] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.246544] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.255949] sunxi_i2c_do_xfer()991 - [i2c0] incomplete xfer (status: 0x20, de
[    2.265407] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.274861] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.284253] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.293701] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.303153] sunxi_i2c_do_xfer()991 - [i2c2] incomplete xfer (status: 0x20, de
[    2.312365] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[    2.319480] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->sta
[    2.330688] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[    2.338232] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[    2.344433] timeout_to_interv, line 167
[    2.348690] interv_to_timeout, line 189
[    2.352960] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual ti
[    2.362412] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-d
[    2.371906] calibrat: max_cpufreq 1008Mhz Type 1!
[    2.377175] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed,
[    2.386300] [cpu_freq] ERR:cpu boot frequency can not be more than cpu max fr
[    2.394906] [cpu_freq] ERR:sunxi_cpufreq_initcall, use default cpu max/min fr
[    2.408563] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.121 2016-08-3 16:46)
[    2.419898] [mmc]: get mmc0's sdc_power is null!
[    2.425007] [mmc]: get mmc1's sdc_power is null!
[    2.430139] [mmc]: get mmc1's 2xmode ok, val = 1
[    2.435222] [mmc]: get mmc1's ddrmode ok, val = 1
[    2.440454] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
[    2.448035] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing
[    2.460710] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing
[    2.473252] Set the period of fan's htimer to 0us
[    2.478514] oprofile: using arm/armv7-ca7
[    2.483106] u32 classifier
[    2.486107]     Actions configured
[    2.489866] Netfilter messages via NETLINK v0.30.
[    2.495152] nf_conntrack version 0.5.0 (3920 buckets, 15680 max)
[    2.502050] ctnetlink v0.93: registering with nfnetlink.
[    2.507979] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    2.515641] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    2.522337] xt_time: kernel timezone is -0000
[    2.527271] IPv4 over IPv4 tunneling driver
[    2.532253] gre: GRE over IPv4 demultiplexor driver
[    2.537670] ip_gre: GRE over IPv4 tunneling driver
[    2.543455] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.549508] arp_tables: (C) 2002 David S. Miller
[    2.554662] TCP: cubic registered
[    2.558327] Initializing XFRM netlink socket
[    2.563097] NET: Registered protocol family 17
[    2.568010] NET: Registered protocol family 15
[    2.572959] L2TP core driver, V2.0
[    2.576721] PPPoL2TP kernel driver, V2.0
[    2.581057] L2TP IP encapsulation support (L2TPv3)
[    2.586408] L2TP netlink interface
[    2.590196] L2TP ethernet pseudowire support (L2TPv3)
[    2.595874] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7
[    2.604388] ThumbEE CPU extension supported.
[    2.609102] Registering SWP/SWPB emulation handler
[    2.615091] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:06:40
[    2.623855] ths_fetch_sysconfig_para: type err  device_used = 1.
[    2.631655] CPU Budget:Register notifier
[    2.635989] CPU Budget:register Success
[    2.640283] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registe
Begin to load ramdisk:/init
[    2.653662] Freeing init memory: 1372K
[/init]: RootDevice is "/dev/nandd"
[/init]: Try to load Nand ...
[    2.690719] [NAND]nand init start, nand0_used_flag is 1
[    2.696520] [NAND]nand init start
[    2.700268] nand:get voltage axp22_dcdc1 ok:0
[    2.705544] physic_info_read start!!
[    2.713673] kernel: nand version: 3 6014 20170817 1826
[    2.733191] [ND]boot start
[    2.736354]  check boot start.
[    2.741298] find a bad block: 0 12 0 sdata: 00 78 69 87
[    2.794701] find a bad block: 0 12 0 sdata: 00 78 69 87
[    2.833566] find a bad block: 0 12 0 sdata: 00 78 69 87
[    2.907368] find a bad block: 0 12 0 sdata: 00 78 69 87
[    2.982893] find a bad block: 0 12 0 sdata: 00 78 69 87
[    3.059558]  check boot  end.
[    3.425127] [NE]recover_phy_page_mapping no used page 28!!
[    3.431212] [NE]erase_block block 672!
[    3.473995] [NE] adjust free list : 672 1!!
[    3.478605] [ND]free block nums is 675 !
[    3.482942] [NE]not power on gc 675!
[    3.486926] [ND]nftl ok!
[    3.490848]  nanda:
[    3.494754]  nandb: unknown partition table
[    3.500885]  nandc: unknown partition table
[    3.506992]  nandd: unknown partition table
[    3.513084]  nande: unknown partition table
[    3.519220]  nandf: unknown partition table
[    3.525299]  nandg: unknown partition table
[    3.530636]  nandh: unknown partition table
[    3.535948]  nandi: unknown partition table
[    3.540831] [NAND]nand init end
/dev/nandd already has journal
e2fsck -y /dev/nandd
e2fsck 1.43.1 (08-Jun-2016)
/dev/nandd: clean, 1152/6000 fil[    3.565682] EXT4-fs: Warning: mounting with d
es, 4697/12288 blocks
mount /dev/nandd on /root temporarily
[    3.587429] EXT4-fs (nandd): mounted filesystem with journalled data mode. Op
check partition /dev/nandf
e2fsck 1.43.1 (08-Jun-2016)
/dev/nandf: clean, 209/2048 files, 1779/4096 blocks
is_critical_data_files_ok /dev/nandf
mount[    3.612414] EXT4-fs (nandf): mounted filesystem with journalled data mod
 /dev/nandf on /mnt
Critical files exist
[   23.670012] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   23.676303]  2: (1 GPs behind) idle=0ef/1/0 ▒qz▒
[   23.680000]  (detected by 0, t=2002 jiffies)
[   23.680000] INFO: Stall ended before state dump start
[   83.720007] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   83.726322]  2: (1 GPs behind) idle=0ef/1/0 ▒qz▒
[   83.730000]  (detected by 0, t=8007 jiffies)
[   83.730000] INFO: Stall ended before state dump start
 

 

Share this post


Link to post
Share on other sites
1 hour ago, asd0982 said:

Добрый вечер! Подскажите пожалуйста, достались мне 2 новых контрольки от М3 на чипе H3 ревизии V6C, предыдущий хозяин я как понял пытался ее прошить, но прошил левой прошивкой. Я прошил их через SDCard прошивкой с сайта pangolinminer, одна плата заработала без проблем, вторая не заводится - горят оба диода( красный+зеленый), в сети ее не видно. С помощью UART получил вот такой лог:

 

Судя по логу с файловой системой трабл не может примонтировать или наоборот слишком много маунт поинтов надо смотреть бартом что при прошивке идёт 

Share this post


Link to post
Share on other sites
8 часов назад, kksrs сказал:

Судя по логу с файловой системой трабл не может примонтировать или наоборот слишком много маунт поинтов надо смотреть бартом что при прошивке идёт 

Спасибо, что посмотрели. Если прошивать не подключаясь по UART, то диоды мигают, вроде шьется, через 15 с тухнет, короче вроде все норм, если подключаюсь по UART (через CH210x с помощью Putty) и начинаю прошивку с SD то зависает где то на середине процесса, движется статус бар записи и на полпути останавливается, диоды оба остаются включенными.

8 часов назад, kksrs сказал:

Судя по логу с файловой системой трабл не может примонтировать или наоборот слишком много маунт поинтов надо смотреть бартом что при прошивке идёт 

Барт-это что?

Share this post


Link to post
Share on other sites
1 minute ago, asd0982 said:

Спасибо, что посмотрели. Если прошивать не подключаясь по UART, то диоды мигают, вроде шьется, через 15 с тухнет, короче вроде все норм, если подключаюсь по UART (через CH210x с помощью Putty) и начинаю прошивку с SD то зависает где то на середине процесса, движется статус бар записи и на полпути останавливается, диоды оба остаются включенными.

Барт-это что?

Это юарт ) т9 ) 

короче похоже у железки битый нанд или как я выше сказал перевёл прошивка в нанде разделов наделала а стоковая не может затереть 

Share this post


Link to post
Share on other sites
5 минут назад, kksrs сказал:

Это юарт ) т9 ) 

короче похоже у железки битый нанд или как я выше сказал перевёл прошивка в нанде разделов наделала а стоковая не может затереть 

Ручками восстановить разделы не возможно?

Share this post


Link to post
Share on other sites

Снял лог при прошивке

Цитата

[      0.283]MODE

U-Boot 2011.09-rc1-00000-g7f4f26d-dirty (Oct 27 2017 - 16:37:23) Allwinner Techn                                                                                                                                                             ology

[      0.293]version: 1.1.0
[      0.295]uboot commit : 7f4f26db9099a59cd24351e2e09e1d3601ddd288

not using multi config
normal mode
[      0.308]pmbus:   ready
not set main pmu id
axp_probe error
[board_vendor] vid_used not used
[      0.326]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
dram_para_set start
dram_para_set end
[      0.338]DRAM:  256 MiB
relocation Offset is: 05ae0000
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 17
[      0.390]NB1 : enter phy init
[      0.393]nand_physic_init
[      0.396]Reset NDFC start 0  0
[      0.399]Reset NDFC end 0  0
[      0.402]channel 0 chip 0: 98 da 90 15 76 16 08 00
[      0.407]nand not support! channel 0 chip 1: 00 00 00 00 00 00 00 00
[      0.413]nand not support! channel 0 chip 2: 00 00 00 00 00 00 00 00
[      0.420]nand not support! channel 0 chip 3: 00 00 00 00 00 00 00 00
nand : get id number_ctl fail, 1
[      0.429]build nand physical connection ok...
[      0.433]CE: [      0.435]0 [      0.436]
RB: [      0.438]0 [      0.439]
[      0.441]check scan data, first_check 3 0!
[      0.445]interface change ddr_type:0 sclk0:30 sclk1:60 sdr_edo_bak:1 ddr_edo                                                                                                                                                             _bak:1 ddr_delay_bak:0 !
[      0.454]_get right timing para, set edo to 1 for sdr nand.
[      0.459] m0 special init
[      0.462]physic_info_read start!!
[      0.466]physic_info_get_offset start!!
[      0.471]physic_info_get_one_copy start!!
[      0.476]bad block:chip 0 block 12
[      0.480]block 16 page 40
[      0.482]block 16 page 41
[      0.485]block 16 page 42
[      0.488]block 16 page 43
[      0.490]block 16 page 44
[      0.493]block 16 page 45
[      0.496]block 16 page 46
[      0.499]block 16 page 47
[      0.501]physic info copy is ok
[      0.504]==============show_nctri======================
[      0.510]channel_id:            0
[      0.513]type:                  1
[      0.516]chip_cnt:              1
[      0.520]chip_connect_info:     1
[      0.523]rb_connect_info:       1
[      0.526]ce: [      0.528]0 [      0.529]
rb: [      0.531]0 [      0.532]
[      0.534]dma_type:              1
[      0.537]dma_addr:              1201849536
[      0.541]write_wait_rb_before:  0
[      0.544]write_wait_rb_mode:    0
[      0.548]rb_ready_flag:         1
[      0.551]dma_ready_flag:        0
[      0.555]timing ctl: [      0.557]0x100 [      0.558]
[      0.560]print ndfc reg:
[      0.562]reg_ctl:               0x0f004119
[      0.566]reg_sta:               0x00000f01
[      0.571]reg_int:               0x00000000
[      0.575]reg_timing_ctl:        0x00000100
[      0.579]reg_timing_cfg:        0x00010095
[      0.583]reg_addr_low:          0x042f0000
[      0.587]reg_addr_high:         0x00000000
[      0.591]reg_sect_num:          0x00000002
[      0.596]reg_byte_cnt:          0x00000001
[      0.600]reg_cmd:               0x85ec0000
[      0.604]reg_read_cmd_set:      0x00e00530
[      0.608]reg_write_cmd_set:     0x70008510
[      0.612]reg_io:                0x70008510
[      0.616]reg_ecc_ctl:           0x4a803008
[      0.621]reg_ecc_sta:           0x00000000
[      0.625]reg_debug:             0x00000100
[      0.629]reg_err_cnt0:          0x00000000
[      0.633]reg_err_cnt1:          0x00000000
[      0.637]reg_err_cnt2:          0x00000000
[      0.641]reg_err_cnt3:          0x00000000
[      0.645]reg_user_data_base:    0x00000000
[      0.650]reg_efnand_sta:        0x00000000
[      0.654]reg_spare_area:        0x00000800
[      0.658]reg_pat_id:            0x00000000
[      0.662]reg_mbus_dma_addr:     0x47a2c4c0
[      0.666]reg_dma_cnt:           0x00000800
[      0.670]reg_ram0_base:         0x00000000
[      0.675]reg_ram1_base:         0x00000000
[      0.679]reg_dma_sta:           0x08000000
[      0.683]==============show_nctri end======================
[      0.689]==============show_nci======================
[      0.694]id: [      0.695]98 [      0.697]da [      0.698]90 [      0.699]15                                                                                                                                                              [      0.701]76 [      0.702]ff [      0.703]ff [      0.705]ff [      0.706]
[      0.708]chip_no:                   0
[      0.711]nctri_chip_no:             0
[      0.715]driver_no:                 0
[      0.719]blk_cnt_per_chip:          2048
[      0.723]sector_cnt_per_page:       4
[      0.726]page_cnt_per_blk:          64
[      0.730]page_offset_for_next_blk:  64
[      0.734]randomizer:                1
[      0.738]read_retry:                0
[      0.741]interface_type:            0
[      0.745]timing_mode:               3
[      0.749]support_change_onfi_timing_mode:  0
[      0.753]support_ddr2_specific_cfg:        0
[      0.758]support_io_driver_strength:       0
[      0.762]support_vendor_specific_cfg:      0
[      0.766]support_onfi_sync_reset:   0
[      0.770]support_toggle_only:       0
[      0.774]frequency:                 30
[      0.778]ecc_mode:                  3
[      0.781]max_erase_times:           10000
[      0.785]page_addr_bytes:           0
[      0.789]sdata_bytes_per_page:      8
[      0.793]nsci chip_no:              0x00000000
[      0.797]nctri channel_id:          0x00000000
[      0.802]multi_plane_read_cmd0:     0x00000000
[      0.806]multi_plane_read_cmd1:     0x00000030
[      0.811]multi_plane_write_cmd0:    0x00000011
[      0.815]multi_plane_write_cmd1:    0x00000081
[      0.820]bad_block_flag_position:   0x00000002
[      0.824]multi_plane_block_offset:  0x00000001
[      0.829]id_number:                 0x0002001d
[      0.833]================show_nsi====================
[      0.838]chip_cnt:      1
[      0.841]block_nums:    0
[      0.844]================show_nssi====================
[      0.849]super_chip_cnt:      1
[      0.852]super_block_nums:    0
[      0.855]support_two_plane:   0
[      0.859]support_v_interleave:0
[      0.862]support_dual_channel:0
[      0.865]=================show_nsci===================
[      0.870]chip_no:                       0
[      0.874]blk_cnt_per_super_chip:        1024
[      0.879]sector_cnt_per_super_page:     8
[      0.883]page_cnt_per_super_blk:        64
[      0.887]page_offset_for_next_super_blk:64
[      0.891]spare_bytes:                   16
[      0.895]two_plane:                     1
[      0.899]channel_num:                   1
[      0.903]vertical_interleave:           0
[      0.907]dual_channel:                  0
[      0.912]driver_no:                     0
[      0.916]nci_first:                     0 0
uboot: nand version: 3 6016 20171027 1826
[      0.924]nand_physic_init end
[      0.932]nand secure storage ok: 48,49
[      0.936]NandHwInit end
[      0.938]NB1 : nand phy init ok
[      0.942]NB1 : enter phy Exit
[      0.945]nand_physic_exit
[      0.947] m0 special exit
nand found
[      0.951][mmc]: mmc driver ver 2016-03-24 19:30:15
[      0.956][mmc]: get sdc_phy_wipe fail.
[      0.960][mmc]: get sdc0 sdc_erase fail.
[      0.964][mmc]: get sdc_f_max fail,use default 50000000Hz
[      0.969][mmc]: get sdc_ex_dly_used fail,use default dly
[      0.975][mmc]: SUNXI SD/MMC: 0
[      0.979][mmc]: mmc_config_clock: clk 400000
[      0.994][mmc]: *Try SD card 0*
[      1.019][mmc]: mmc_config_clock: clk 25000000
[      1.047][mmc]: mmc_config_clock: clk 25000000
[      1.057][mmc]: mmc_config_clock: clk 50000000
[      1.067][mmc]: CID 0x9c534f55 0x53443030 0x2a9a30e 0xc201094d
[      1.072][mmc]: mmc clk 50000000
[      1.076][mmc]: SD/MMC Card: 4bit, capacity: 30255MB
[      1.081][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[      1.086][mmc]: ***SD/MMC 0 init OK!!!***
[      1.094][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[      1.099][mmc]: secure_feature 0x0
[      1.103][mmc]: secure_removal_type  0x0
mmc init ok
use mbr copy[0], mbr part count = 9
Not Found clk pll_video1 in script
script config pll_periph0 to 576 Mhz
DRV_DISP_Init end
[disk_read_fs] no the partition
error: open tv_vdid.fex, maybe it is not exist
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
boot_disp.auto_hpd=0
not auto hotplud, the default output_type is 0
check what the output_type=0
out of usb burn from boot: not boot mode
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:9-
-name-        -start-       -size-
bootloader  : 1000000       1000000
env         : 2000000       1000000
boot        : 3000000       1000000
rootfs      : 4000000       4000000
recovery    : 8000000       1000000
data        : 9000000       1000000
data_bak    : a000000       1000000
reserved    : b000000       1000000
UDISK       : c000000       0
-----------------------------------
▒▒▒▒▒▒▒▒▒
 

Бывший хозяин платы говорит что в самом начале плата работала. Может все таки попробовать удалить все разделы? Как это сделать, подскажите пожалуйста.

Share this post


Link to post
Share on other sites

У кого есть шлейф от лезвия на контрольную плату продать? поплавился, когда провода питания погорели. Напишите в личку.

Share this post


Link to post
Share on other sites

Добрый день, еще до конца не прочел все страницы, есть сразу вопрос, кто нибудь погружал M3 в жидкость для охлаждения??? какой состав использовали? какие обманки рабочие

Edited by SergeyAst

Share this post


Link to post
Share on other sites
2 часа назад, SergeyAst сказал:

Добрый день, еще до конца не прочел все страницы, есть сразу вопрос, кто нибудь погружал M3 в жидкость для охлаждения??? какой состав использовали? какие обманки рабочие

Я для себя выбрал COOLANT  (https://bixbit.io/ru/products/coolant) как оптимальный по цене, показала себя хорошо, на 4 асика уходит 30 литров. Обманки сделал из NE555, запитал их через стабилизатор питания на 5В.

Share this post


Link to post
Share on other sites

Отвечу на вопрос из лички:

Вопрос -  нужна ли врезка в воду для ее работы? Или достаточно просто погрузить асик в нее и всё?

Ответ - если есть возможность использования воды, то однозначно лучше использовать воду для двухконтурной системы. Плюсы: + экономия иммерсионной жидкости, т.к. первый контур получается не большой и на 4 асика хватает 20 литров

+экономия электричества на вентиляторы и полностью отсутствует шум, если у вас есть скважина или пруд

Просто погрузить в иммерсионку конечно же не достаточно, куда же вы будете утилизировать тепло, емкость в асиками нагреется буквально за 5 минут? Нужен циркуляционный насос и радиаторы с вентиляторами.

Share this post


Link to post
Share on other sites
07.04.2019 в 19:33, Granfo сказал:

У кого есть шлейф от лезвия на контрольную плату продать? поплавился, когда провода питания погорели. Напишите в личку.

Есть в наличии

Написал в личку

Share this post


Link to post
Share on other sites
05.04.2019 в 09:15, kksrs сказал:

Это юарт ) т9 ) 

короче похоже у железки битый нанд или как я выше сказал перевёл прошивка в нанде разделов наделала а стоковая не может затереть 

Добрый вечер! Подскажите пожалуйста, а возможно ли залить прошивку на SD Card вместо NAND (я так понял она битая) и загружаться все время только с SD Card?

Share this post


Link to post
Share on other sites

Есть предположение что понижающая прошивка с вирусом. Через какое-то время поменялся пароль на веб интерфейс и пул с левым кошельком появился

 

Share this post


Link to post
Share on other sites

Есть оригинальный блок питания и шлейфа на М3 

В идеальном рабочем состоянии 

Контакты немного потемневшие

Остался от асика

Может кому надо - продам

Пишите в личку

 

Edited by Anatoly Msk

Share this post


Link to post
Share on other sites

есть вопрос, это плата с M3, с которого я снял радиатор алюминиевый, вопросы следующие: можно ли снять и как радиаторы с самих чипов и в дальнейшем это все чудо будет помещаться в иммерсионную ванну, можно ли погрузить в таком виде, и надо ли ставить на место винты с пружинками, для тех кто не разбирал, стенка задняя алюминиевая, если эти винты держат дополнительно радиаторы на чипах, можно их гайками с обратной стороны.

 

если не использовать дополнительный радиатор, можно очень много места сэкономить, при этом сделать ванну выше, чтобы горячая жидкость выше поднималась

P1070296.JPG

P1070297.JPG

Share this post


Link to post
Share on other sites

SergeyAst, радиаторы снимать не стоит. Сняв радиатор, вы сильно уменьшите площадь теплообмена, чипы перегреются.

Share this post


Link to post
Share on other sites

Коллеги подскажите, пробовал кто-нибудь подключать от двух блоков питания по схеме как в инструкции к S9 к примеру?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...