Перейти к содержанию

[XMR][AEON][SUMO][KRB][ETN][ITNS][EDL][GRFT][XTL][XHV][LOK] hashvault.pro


Рекомендуемые сообщения

2 часа назад, sboa сказал:

 

Выводил на ЕХМО 0,3 XMR, сейчас жду на bitfinex выставлял тоже 0,3 вот-вот должно докапать

Поставил 0,1 и всё прилетело. ура

Ссылка на комментарий
Поделиться на другие сайты

  • Ответов 1,5 тыс
  • Создана
  • Последний ответ

Топ авторов темы

Вчера поставил 0,2 хмыря на вывод, но не пришли, жду пока 0,3 будет.

Что-то не сработало или я не так сделал?  (ставил 0,2 когда уже было больше 0,2)

Ссылка на комментарий
Поделиться на другие сайты

Добрый день всем. Админа на форуме не видно чего-то.

Вопрос к остальным по поводу Electroneum может кто знает: пул работать будет или закрывается?

Нашел на http://miningclub.info/threads/electroneum-etn-pool.22293/page-31 след инфу  пост 617- Последние новости. electroneum.hashvault.pro сдулся, Админ сам всех гонит. Сегодня выплаты понизил до 0.02 и уже началась раздача выплат. Сервак будет работать около месяца но с теми же ошибками. Кто куда переходит?

Это деза или как?

Ссылка на комментарий
Поделиться на другие сайты

Долго будет дашборд в ауте?

Картинки по запросу нокаут

Изменено пользователем sboa
Ссылка на комментарий
Поделиться на другие сайты

https://github.com/fireice-uk/xmr-stak/releases, указанна версия 2.1.0.
Кто уже пользовался этим майнером?, в описании указанно, что он поддерживает одновременно Cpu и Gpu  от AMD и NVIDIA.
Как его настроить?, в папке отсутствует config файл или что-то на него похожее.

Ссылка на комментарий
Поделиться на другие сайты

@pma8181 запускаете майнер,в интерактивном режиме отвечаете майнеру на несколько вопросов, после чего создаются файлы конфигурации. Не всегда оптимальные. И майнить можно процом и видюхами в одной программе сразу.

Ссылка на комментарий
Поделиться на другие сайты

8 часов назад, pma8181 сказал:

https://github.com/fireice-uk/xmr-stak/releases, указанна версия 2.1.0.
Кто уже пользовался этим майнером?, в описании указанно, что он поддерживает одновременно Cpu и Gpu  от AMD и NVIDIA.
Как его настроить?, в папке отсутствует config файл или что-то на него похожее.

 

Вот тебе пример:

Как убрать под спойлер?

/*
 * Thread configuration for each thread. Make sure it matches the number above.
 * low_power_mode - This mode will double the cache usage, and double the single thread performance. It will 
 *                  consume much less power (as less cores are working), but will max out at around 80-85% of 
 *                  the maximum performance.
 *
 * no_prefetch -    Some sytems can gain up to extra 5% here, but sometimes it will have no difference or make
 *                  things slower.
 *
 * affine_to_cpu -  This can be either false (no affinity), or the CPU core number. Note that on hyperthreading 
 *                  systems it is better to assign threads to physical cores. On Windows this usually means selecting 
 *                  even or odd numbered cpu numbers. For Linux it will be usually the lower CPU numbers, so for a 4 
 *                  physical core CPU you should select cpu numbers 0-3.
 *
 * On the first run the miner will look at your system and suggest a basic configuration that will work,
 * you can try to tweak it from there to get the best performance.
 * 
 * A filled out configuration should look like this:
 * "cpu_threads_conf" :
 * [ 
 *      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 },
 *      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },
 * ],
 */
"cpu_threads_conf" : [ 
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : false },
],

/*
 * LARGE PAGE SUPPORT
 * Lare pages need a properly set up OS. It can be difficult if you are not used to systems administation,
 * but the performace results are worth the trouble - you will get around 20% boost. Slow memory mode is
 * meant as a backup, you won't get stellar results there. If you are running into trouble, especially
 * on Windows, please read the common issues in the README.
 *
 * By default we will try to allocate large pages. This means you need to "Run As Administrator" on Windows.
 * You need to edit your system's group policies to enable locking large pages. Here are the steps from MSDN
 *
 * 1. On the Start menu, click Run. In the Open box, type gpedit.msc.
 * 2. On the Local Group Policy Editor console, expand Computer Configuration, and then expand Windows Settings.
 * 3. Expand Security Settings, and then expand Local Policies.
 * 4. Select the User Rights Assignment folder.
 * 5. The policies will be displayed in the details pane.
 * 6. In the pane, double-click Lock pages in memory.
 * 7. In the Local Security Setting – Lock pages in memory dialog box, click Add User or Group.
 * 8. In the Select Users, Service Accounts, or Groups dialog box, add an account that you will run the miner on
 * 9. Reboot for change to take effect.
 *
 * Windows also tends to fragment memory a lot. If you are running on a system with 4-8GB of RAM you might need
 * to switch off all the auto-start applications and reboot to have a large enough chunk of contiguous memory.
 *
 * On Linux you will need to configure large page support "sudo sysctl -w vm.nr_hugepages=128" and increase your
 * ulimit -l. To do do this you need to add following lines to /etc/security/limits.conf - "* soft memlock 262144"
 * and "* hard memlock 262144". You can also do it Windows-style and simply run-as-root, but this is NOT
 * recommended for security reasons.
 *
 * Memory locking means that the kernel can't swap out the page to disk - something that is unlikey to happen on a 
 * command line system that isn't starved of memory. I haven't observed any difference on a CLI Linux system between 
 * locked and unlocked memory. If that is your setup see option "no_mlck". 
 */

/*
 * use_slow_memory defines our behaviour with regards to large pages. There are three possible options here:
 * always  - Don't even try to use large pages. Always use slow memory.
 * warn    - We will try to use large pages, but fall back to slow memory if that fails.
 * no_mlck - This option is only relevant on Linux, where we can use large pages without locking memory.
 *           It will never use slow memory, but it won't attempt to mlock
 * never   - If we fail to allocate large pages we will print an error and exit.
 */
"use_slow_memory" : "warn",

/*
 * NiceHash mode
 * nicehash_nonce - Limit the noce to 3 bytes as required by nicehash. This cuts all the safety margins, and
 *                  if a block isn't found within 30 minutes then you might run into nonce collisions. Number
 *                  of threads in this mode is hard-limited to 32.
 */
"nicehash_nonce" : false,

/*
 * Manual hardware AES override
 *
 * Some VMs don't report AES capability correctly. You can set this value to true to enforce hardware AES or 
 * to false to force disable AES or null to let the miner decide if AES is used.
 * 
 * WARNING: setting this to true on a CPU that doesn't support hardware AES will crash the miner.
 */
"aes_override" : null,

/*
 * TLS Settings
 * If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption
 * to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel. 
 *
 * use_tls         - This option will make us connect using Transport Layer Security.
 * tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.
 * tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it.
 */
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",

/*
 * pool_address	  - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.
 * wallet_address - Your wallet, or pool login.
 * pool_password  - Can be empty in most cases or "x".
 *
 * We feature pools up to 1MH/s. For a more complete list see M5M400's pool list at www.moneropools.com
 */
"pool_address" : "pool.minemonero.pro:5555",
"wallet_address" : "твой кошелек",
"pool_password" : "имя воркера:твоя почта@mail.ru",

/*
 * Network timeouts.
 * Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make 
 * sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for 
 * nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -
 * long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the
 * server usually takes to process our calls.
 *
 * call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.
 * retry_time	- How long should we wait before another connection attempt.
 *                Both values are in seconds.
 * giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners
 *                don't mine while the connection is lost, so your computer's power usage goes down to idle.
 */
"call_timeout" : 10,
"retry_time" : 10,
"giveup_limit" : 0,

/*
 * Output control.
 * Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal
 * really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal
 * performance monitors, there is very little reason to spew out pages of text instead of concise reports.
 * Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.
 *
 * verbose_level - 0 - Don't print anything. 
 *                 1 - Print intro, connection event, disconnect event
 *                 2 - All of level 1, and new job (block) event if the difficulty is different from the last job
 *                 3 - All of level 1, and new job (block) event in all cases, result submission event.
 *                 4 - All of level 3, and automatic hashrate report printing 
 */
"verbose_level" : 3,

/*
 * Automatic hashrate report
 *
 * h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.
 *                This option has no effect if verbose_level is not 4.
 */
"h_print_time" : 60,

/*
 * Daemon mode
 *
 * If you are running the process in the background and you don't need the keyboard reports, set this to true.
 * This should solve the hashrate problems on some emulated terminals.
 */
"daemon_mode" : false,

/*
 * Output file
 *
 * output_file  - This option will log all output to a file.
 *
 */
"output_file" : "",

/*
 * Built-in web server
 * I like checking my hashrate on my phone. Don't you?
 * Keep in mind that you will need to set up port forwarding on your router if you want to access it from
 * outside of your home network. Ports lower than 1024 on Linux systems will require root.
 *
 * httpd_port - Port we should listen on. Default, 0, will switch off the server.
 */
"httpd_port" : 0,

/*
 * prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?
 *               This setting will only be needed in 2020's. No need to worry about it now.
 */
"prefer_ipv4" : true,

 

Изменено пользователем sboa
Ссылка на комментарий
Поделиться на другие сайты

Это номрально, что копая через xmr-stak (всех версий, и старых xmr-stak-cpu) ловит только "SOCKET ERROR - CALL error: Timeout while waiting for a reply" причём только если подключаться к XMR пулу, а если к FCN-XMR то всё гуд, в чём приколюха, я не понимаю.
Причём он подключается, логинится, а потом только начинает ловить ошибку, ничо не понимаю

Ссылка на комментарий
Поделиться на другие сайты

Попробую еще разок помощи попросить... есть 2-е 1060 пробую их на монеру настроить и получаю ошибки...

xmr-stak-nvidia

[2017-12-03 14:35:56] : Connecting to pool pool.monero.hashvault.pro:5555 ...
[2017-12-03 14:35:56] : Connected. Logging in...
[2017-12-03 14:35:56] : Difficulty changed. Now: 5000.
[2017-12-03 14:35:56] : New block detected.

GPU 0: unspecified launch failure
C:/Users/MAIN/Documents/Visual Studio 2015/Projects/xmr-stak-nvidia/xmr-stak-nvidia/nvcc_code/cuda_extra.cu line 246

 

XMRig

* VERSIONS:     XMRig/2.4.2 libuv/1.14.1 CUDA/9.0 MSVC/2015
 * CPU:          Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz x64 -AES-NI
 * GPU #0:       GeForce GTX 1060 6GB @ 1759/4004 MHz 64x30 6x25 arch:61 SMX:10
 * GPU #1:       GeForce GTX 1060 6GB @ 1759/4004 MHz 64x30 6x25 arch:61 SMX:10
 * ALGO:         cryptonight, donate=5%
 * POOL #1:      pool.monero.hashvault.pro:5555
 * COMMANDS:     hashrate, health, pause, resume
[2017-12-03 14:40:37] use pool pool.monero.hashvault.pro:5555 212.109.216.231
[2017-12-03 14:40:37] new job from pool.monero.hashvault.pro:5555 diff 5000
[CUDA] Error gpu 0: <cryptonight_extra_cpu_final>:231 "unspecified launch failure"

 

Может кто-нибудь капает на 1060-ых...  подскажет куда двигаться?

Карты думаю исправны.. (ETH,VIVO,VTC  копают без проблем)

Ссылка на комментарий
Поделиться на другие сайты

cpu работает...  XMrig  тоже ошибку выдает..

XMRig

* VERSIONS:     XMRig/2.4.2 libuv/1.14.1 CUDA/9.0 MSVC/2015
 * CPU:          Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz x64 -AES-NI
 * GPU #0:       GeForce GTX 1060 6GB @ 1759/4004 MHz 64x30 6x25 arch:61 SMX:10
 * GPU #1:       GeForce GTX 1060 6GB @ 1759/4004 MHz 64x30 6x25 arch:61 SMX:10
 * ALGO:         cryptonight, donate=5%
 * POOL #1:      pool.monero.hashvault.pro:5555
 * COMMANDS:     hashrate, health, pause, resume
[2017-12-03 14:40:37] use pool pool.monero.hashvault.pro:5555 212.109.216.231
[2017-12-03 14:40:37] new job from pool.monero.hashvault.pro:5555 diff 5000
[CUDA] Error gpu 0: <cryptonight_extra_cpu_final>:231 "unspecified launch failure"

Ссылка на комментарий
Поделиться на другие сайты

В 17.12.2017 в 09:39, pma8181 сказал:

https://github.com/fireice-uk/xmr-stak/releases, указанна версия 2.1.0.

попробовал, работает,  но 130 h/s показывает с 1060-ой....    чето мало

походу вообще пул упал?

Ссылка на комментарий
Поделиться на другие сайты

15 минут назад, pma8181 сказал:

У меня майнеры "стоят" - выдают ошибку конекта с пулом.

Проскальзывают иногда такие сообщения у майнера.

 

Ссылка на комментарий
Поделиться на другие сайты

1 минуту назад, sboa сказал:

Из чата:

image.png.b623e93480da1fa1f33bbaf37aad1b98.png

Боты или ддос?

Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу

×
×
  • Создать...