Перейти к содержанию

[XMR][AEON][SUMO][KRB][ETN][ITNS][EDL][GRFT][XTL][XHV][LOK] hashvault.pro


Рекомендуемые сообщения

решил использовать xmrig-proxy для своих майнеров, но у него в логах через каждые несколько минут пишет следующее:

 

duplicate job received, ignore 
на сколько это влияет на производительность?

Это не очень хорошо, да.

 

На каком сервере майните?

Ссылка на комментарий
Поделиться на другие сайты

  • Ответов 1,5 тыс
  • Создана
  • Последний ответ

Топ авторов темы

@MineMoneroPRO, frankfurt01.minemonero.pro:3334

Никаких хитрых сетевых конфигураций не установлено?

 

Дважды это лечили перезагрузкой роутера.

Ссылка на комментарий
Поделиться на другие сайты

@MineMoneroPRO, нет, только в xmrig-proxy включил keepalive, по умолчанию выключено, попробую отключить.

Ссылка на комментарий
Поделиться на другие сайты

Докладываю. С отключенным keepalive за 30 минут подобных сообщений в логах не было.

Изменено пользователем surefire
Ссылка на комментарий
Поделиться на другие сайты

Нормальный пул. (на первый взгляд, по крайней мере - только сегодня перевел часть мощи). Проблем с подключением нет, все доходчиво. Клей работает без проблем.

Вопрос только один - список global пулов и пулов по локациям. Глобал, я так понимаю, подразумевает только автоопределение? Или для большего количества печенек лучше прописывать конкретную локацию?

Ссылка на комментарий
Поделиться на другие сайты

Нормальный пул. (на первый взгляд, по крайней мере - только сегодня перевел часть мощи). Проблем с подключением нет, все доходчиво. Клей работает без проблем.

Вопрос только один - список global пулов и пулов по локациям. Глобал, я так понимаю, подразумевает только автоопределение? Или для большего количества печенек лучше прописывать конкретную локацию?

Это ГеоДНС. Указывая pool.minemonero.pro - автоматически выбираете ближайшую к себе ноду.

А для большого количества печенек, особенно в одной локации, лучше использовать прокси.

Изменено пользователем MineMoneroPRO
Ссылка на комментарий
Поделиться на другие сайты

А для большого количества печенек, особенно в одной локации, лучше использовать прокси.

Так то да, но смысл в прокси, если у Вас ссл прекрасно "входит"? 

Кста, в 9.7 деффи лучше отключить, во первых - при отключении заявленного падения хр нет, а во-вторых, при включенном (дефаулт) создается впечатление, что деффи постоянно копает (особенно, если олпулс 0 поставить). С чем связано - хз :)

Изменено пользователем YoshCat
Ссылка на комментарий
Поделиться на другие сайты

Смысл в прокси, если у Вас ссл прекрасно "входит"? 

Кста, в 9.7 деффи лучше отключить, во первых - при отключении заявленного падения хр нет, а во-вторых, при включенном (дефаулт) создается впечатление, что деффи постоянно копает (особенно если олпулс 0 поставить). С чем связано - хз :)

 

Смысл в удобстве управления и снижении нагрузки на пул. А если прокси ещё и xmr-node-proxy - то и в небольшом дополнительном профите.

Ссылка на комментарий
Поделиться на другие сайты

 

 

Кста, в 9.7 деффи лучше отключить

 

На этом алгоритме лучше самого Клеймора отключить. Есть xmr-stack, xmrMiner, wolf-xmr-miner, gatelessgate, sgminer-gm...

Ссылка на комментарий
Поделиться на другие сайты

У меня вот такая ошибка - http://take.ms/w8vmS. Куда копать?

Ссылка на комментарий
Поделиться на другие сайты

У меня вот такая ошибка - http://take.ms/w8vmS. Куда копать?

 

Покажите конфиг.

Ссылка на комментарий
Поделиться на другие сайты

Делал, как определил сам майнер

/*
* GPU configuration. You should play around with threads and blocks as the fastest settings will vary.
* index - GPU index number usually starts from 0.
* threads - Number of GPU threads (nothing to do with CPU threads).
* blocks - Number of GPU blocks (nothing to do with CPU threads).
* bfactor - Enables running the Cryptonight kernel in smaller pieces.
* Increase if you want to reduce GPU lag. Recommended setting on GUI systems - 8
* bsleep - Insert a delay of X microseconds between kernel launches.
* Increase if you want to reduce GPU lag. Recommended setting on GUI systems - 100
* affine_to_cpu - This will affine the thread to a CPU. This can make a GPU miner play along nicer with a CPU miner.
*
* On the first run the miner will look at your system and suggest a basic configuration that will work,
* you can try to tweak it from there to get the best performance.
*
* A filled out configuration should look like this:
* "gpu_threads_conf" :
* [
* { "index" : 0, "threads" : 17, "blocks" : 60, "bfactor" : 0, "bsleep" : 0, "affine_to_cpu" : false},
* ],
*/
"gpu_threads_conf" : [
{ "index" : 0,
"threads" : 64, "blocks" : 30,
"bfactor" : 6, "bsleep" : 25,
"affine_to_cpu" : false,
},
{ "index" : 1,
"threads" : 64, "blocks" : 30,
"bfactor" : 6, "bsleep" : 25,
"affine_to_cpu" : false,
},
{ "index" : 2,
"threads" : 64, "blocks" : 30,
"bfactor" : 6, "bsleep" : 25,
"affine_to_cpu" : false,
},
{ "index" : 3,
"threads" : 64, "blocks" : 30,
"bfactor" : 6, "bsleep" : 25,
"affine_to_cpu" : false,
},
{ "index" : 4,
"threads" : 64, "blocks" : 30,
"bfactor" : 6, "bsleep" : 25,
"affine_to_cpu" : false,
},
{ "index" : 5,
"threads" : 64, "blocks" : 30,
"bfactor" : 6, "bsleep" : 25,
"affine_to_cpu" : false,
},
{ "index" : 6,
"threads" : 64, "blocks" : 30,
"bfactor" : 6, "bsleep" : 25,
"affine_to_cpu" : false,
},
{ "index" : 7,
"threads" : 64, "blocks" : 30,
"bfactor" : 6, "bsleep" : 25,
"affine_to_cpu" : false,
},
],

/*
* TLS Settings
* If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption
* to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.
*
* use_tls - This option will make us connect using Transport Layer Security.
* tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.
* tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it.
*/
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",

/*
* pool_address - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.
* wallet_address - Your wallet, or pool login.
* pool_password - Can be empty in most cases or "x".
*/
"pool_address" : "pool.minemonero.pro:5555",
"wallet_address" : "4JUdGzvrMFDWrUUwY3toJATSeNwjn54LkCnKBPRzDuhzi5vSepHfUckJNxRL2gjkNrSqtCoRUrEDAgRwsQvVCjZbRwHKYkyQuQg2ERgPjg",
"pool_password" : "RIG1GPU:iiioroh@gmail.com",

/*
* Network timeouts.
* Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make
* sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for
* nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -
* long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the
* server usually takes to process our calls.
*
* call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.
* retry_time - How long should we wait before another connection attempt.
* Both values are in seconds.
* giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners
* don't mine while the connection is lost, so your computer's power usage goes down to idle.
*/
"call_timeout" : 10,
"retry_time" : 10,
"giveup_limit" : 0,

/*
* Output control.
* Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal
* really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal
* performance monitors, there is very little reason to spew out pages of text instead of concise reports.
* Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.
*
* verbose_level - 0 - Don't print anything.
* 1 - Print intro, connection event, disconnect event
* 2 - All of level 1, and new job (block) event if the difficulty is different from the last job
* 3 - All of level 1, and new job (block) event in all cases, result submission event.
* 4 - All of level 3, and automatic hashrate report printing
*/
"verbose_level" : 3,

/*
* Automatic hashrate report
*
* h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.
* This option has no effect if verbose_level is not 4.
*/
"h_print_time" : 60,

/*
* Output file
*
* output_file - This option will log all output to a file.
*
*/
"output_file" : "",

/*
* Built-in web server
* I like checking my hashrate on my phone. Don't you?
* Keep in mind that you will need to set up port forwarding on your router if you want to access it from
* outside of your home network. Ports lower than 1024 on Linux systems will require root.
*
* httpd_port - Port we should listen on. Default, 0, will switch off the server.
*/
"httpd_port" : 0,

/*
* prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?
* This setting will only be needed in 2020's. No need to worry about it now.
*/
"prefer_ipv4" : true,

 

Ссылка на комментарий
Поделиться на другие сайты

На этом алгоритме лучше самого Клеймора отключить. Есть xmr-stack, xmrMiner, wolf-xmr-miner, gatelessgate, sgminer-gm...

мониторинг по етхмен удобен, в т.ч. с мобилы

сам 9.7 недоделок конечно...ждем обновы

Изменено пользователем YoshCat
Ссылка на комментарий
Поделиться на другие сайты

Делал, как определил сам майнер

/*

* GPU configuration. You should play around with threads and blocks as the fastest settings will vary.

* index - GPU index number usually starts from 0.

* threads - Number of GPU threads (nothing to do with CPU threads).

* blocks - Number of GPU blocks (nothing to do with CPU threads).

* bfactor - Enables running the Cryptonight kernel in smaller pieces.

* Increase if you want to reduce GPU lag. Recommended setting on GUI systems - 8

* bsleep - Insert a delay of X microseconds between kernel launches.

* Increase if you want to reduce GPU lag. Recommended setting on GUI systems - 100

* affine_to_cpu - This will affine the thread to a CPU. This can make a GPU miner play along nicer with a CPU miner.

*

* On the first run the miner will look at your system and suggest a basic configuration that will work,

* you can try to tweak it from there to get the best performance.

*

* A filled out configuration should look like this:

* "gpu_threads_conf" :

* [

* { "index" : 0, "threads" : 17, "blocks" : 60, "bfactor" : 0, "bsleep" : 0, "affine_to_cpu" : false},

* ],

*/

"gpu_threads_conf" : [

{ "index" : 0,

"threads" : 64, "blocks" : 30,

"bfactor" : 6, "bsleep" : 25,

"affine_to_cpu" : false,

},

{ "index" : 1,

"threads" : 64, "blocks" : 30,

"bfactor" : 6, "bsleep" : 25,

"affine_to_cpu" : false,

},

{ "index" : 2,

"threads" : 64, "blocks" : 30,

"bfactor" : 6, "bsleep" : 25,

"affine_to_cpu" : false,

},

{ "index" : 3,

"threads" : 64, "blocks" : 30,

"bfactor" : 6, "bsleep" : 25,

"affine_to_cpu" : false,

},

{ "index" : 4,

"threads" : 64, "blocks" : 30,

"bfactor" : 6, "bsleep" : 25,

"affine_to_cpu" : false,

},

{ "index" : 5,

"threads" : 64, "blocks" : 30,

"bfactor" : 6, "bsleep" : 25,

"affine_to_cpu" : false,

},

{ "index" : 6,

"threads" : 64, "blocks" : 30,

"bfactor" : 6, "bsleep" : 25,

"affine_to_cpu" : false,

},

{ "index" : 7,

"threads" : 64, "blocks" : 30,

"bfactor" : 6, "bsleep" : 25,

"affine_to_cpu" : false,

},

],

/*

* TLS Settings

* If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption

* to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.

*

* use_tls - This option will make us connect using Transport Layer Security.

* tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.

* tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it.

*/

"use_tls" : false,

"tls_secure_algo" : true,

"tls_fingerprint" : "",

/*

* pool_address - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.

* wallet_address - Your wallet, or pool login.

* pool_password - Can be empty in most cases or "x".

*/

"pool_address" : "pool.minemonero.pro:5555",

"wallet_address" : "4JUdGzvrMFDWrUUwY3toJATSeNwjn54LkCnKBPRzDuhzi5vSepHfUckJNxRL2gjkNrSqtCoRUrEDAgRwsQvVCjZbRwHKYkyQuQg2ERgPjg",

"pool_password" : "RIG1GPU:iiioroh@gmail.com",

/*

* Network timeouts.

* Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make

* sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for

* nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -

* long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the

* server usually takes to process our calls.

*

* call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.

* retry_time - How long should we wait before another connection attempt.

* Both values are in seconds.

* giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners

* don't mine while the connection is lost, so your computer's power usage goes down to idle.

*/

"call_timeout" : 10,

"retry_time" : 10,

"giveup_limit" : 0,

/*

* Output control.

* Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal

* really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal

* performance monitors, there is very little reason to spew out pages of text instead of concise reports.

* Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.

*

* verbose_level - 0 - Don't print anything.

* 1 - Print intro, connection event, disconnect event

* 2 - All of level 1, and new job (block) event if the difficulty is different from the last job

* 3 - All of level 1, and new job (block) event in all cases, result submission event.

* 4 - All of level 3, and automatic hashrate report printing

*/

"verbose_level" : 3,

/*

* Automatic hashrate report

*

* h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.

* This option has no effect if verbose_level is not 4.

*/

"h_print_time" : 60,

/*

* Output file

*

* output_file - This option will log all output to a file.

*

*/

"output_file" : "",

/*

* Built-in web server

* I like checking my hashrate on my phone. Don't you?

* Keep in mind that you will need to set up port forwarding on your router if you want to access it from

* outside of your home network. Ports lower than 1024 on Linux systems will require root.

*

* httpd_port - Port we should listen on. Default, 0, will switch off the server.

*/

"httpd_port" : 0,

/*

* prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?

* This setting will only be needed in 2020's. No need to worry about it now.

*/

"prefer_ipv4" : true,

 

 

Все карты одинаковые?

Ссылка на комментарий
Поделиться на другие сайты

Все карты одинаковые?

все MSI 1060, но там и gaming x и gaming 8 gb и gaming x+

Ссылка на комментарий
Поделиться на другие сайты

все MSI 1060, но там и gaming x и gaming 8 gb и gaming x+

ну вот по майнеру - он падает от недостатка памяти карты

 

https://github.com/fireice-uk/xmr-stak-nvidia#choose-value-for-threads-and-blocks

Ссылка на комментарий
Поделиться на другие сайты

На картах одинаковое количество памяти.

А что делать с ссылкой?

Ссылка на комментарий
Поделиться на другие сайты

На картах одинаковое количество памяти.

А что делать с ссылкой?

 

ознакомиться, что такое threads и blocks.

Вам необходимо уменьшать эти значения.

Ссылка на комментарий
Поделиться на другие сайты

ПОдскажите пожалуйста батник для xmr-stak-nvidia  на две 1060  обещайю манить на вашем  пуле))

и как у вас раздел по ригам осуществляется ?

Ссылка на комментарий
Поделиться на другие сайты

ПОдскажите пожалуйста батник для xmr-stak-nvidia  на две 1060  обещайю манить на вашем  пуле))

и как у вас раздел по ригам осуществляется ?

xmr-stak-nvidia настраивается через конфиг. здесь мы это уже обсуждали.

 

Мониторится каждый отдельный воркер.

Ссылка на комментарий
Поделиться на другие сайты

Печально, что и у вас такой высокий минимальный вывод средств. С монеро почему-то на всех пулах с этим беда, некуда податься начинающим майнерам с малыми мощностями. :wacko:

Ссылка на комментарий
Поделиться на другие сайты

Печально, что и у вас такой высокий минимальный вывод средств. С монеро почему-то на всех пулах с этим беда, некуда податься начинающим майнерам с малыми мощностями. :wacko:

 

Все дело в комиссиях самой сети.

Ссылка на комментарий
Поделиться на другие сайты

Здравствуйте. Подскажите для чего используется вот это на вашем пуле? как я понял для большого объема подключения машин? и какое кол-во ферм имеет смыл подключать через проги? 

Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу

×
×
  • Создать...