Перейти к содержанию

[XMR][AEON][SUMO][KRB][ETN][ITNS][EDL][GRFT][XTL][XHV][LOK] hashvault.pro


Рекомендуемые сообщения

Спасибо за поддержку, на майнергет и найсхеш я уже был. Благодаря MineMonero его чуткости и терпению майнинг на CPU уже

работает за что ему поклон до земли, к сожалению у него сейчас нет времени помочь мне с подключением видеокарты а сам я

как не старался так и не отредактировал конфиг до рабочего уровня.Здесь на форуме нашел один конфиг но у меня он не работает, пишет инвалид. Может вы поможите? Видеокарта AMD Radeon HD 7800 MSI.А насчет "вообще не втыкаете" вы правы,

но хочу втыкать а для этого нужно перенимать опыт у более знающих людей ( к сожалению такие люди не хотят чтобы о них думали с благодарностью)

у меня на 7770 тоже инвалид писало, как ни старался не взлетело, потом поставил клеймор, запустил с настройкой -а 4 и 175 х/с выдавать стало. Правда вов ремя майна на видяхе не посмотришь видосы норм))

скачай Claymore CryptoNote GPU Miner v9.7 Beta - POOL

в конфиг закинь:

 

-o stratum+tcp://pool.minemonero.pro:5555
-u свой кошелек
-p название или пароль (я толком не понял)
 
-a 0
#-tt 75
 
И запускай экзешник
Ссылка на комментарий
Поделиться на другие сайты

  • Ответов 1,5 тыс
  • Создана
  • Последний ответ

Топ авторов темы

CPU Shakhter спасибо за подсказку, все сделал как ты описал, программа запустилась, показывает 350 Н/с но в дашборде на сайте пока никаких изменений, как было 310 так и есть, материнка стала греться до 67

градусов, это допустимо?

Изменено пользователем masalex61
Ссылка на комментарий
Поделиться на другие сайты

CPU Shakhter спасибо за подсказку, все сделал как ты описал, программа запустилась, показывает 350 Н/с но в дашборде на сайте пока никаких изменений, как было 310 так и есть, материнка стала греться до 67

градусов, это допустимо?

Ну как бы тут все надо решать охлаждением, вообще монеро как я слышал видяхи не особо грузит. Но 67 градусов не мало. Посмотри сколько вообще допустимая температура у тебя на мамке в инете, в клейморе нажми букву S и он синими цифрами покажет твой х/с

Ссылка на комментарий
Поделиться на другие сайты

@MineMoneroPRO, что-то не пойму,  в дашборде вижу сумму в 2 с небольшим XMR в "Total paid", а на биткоин кошелек уже сутки как ничего не пришло :( 

Или порог выплаты выше? 

Ссылка на комментарий
Поделиться на другие сайты

@MineMoneroPRO, что-то не пойму,  в дашборде вижу сумму в 2 с небольшим XMR в "Total paid", а на биткоин кошелек уже сутки как ничего не пришло :(

Или порог выплаты выше? 

Привет! Это на 9К уже две монетки капнуло? круто. Я сливаю на локайльный кошель в монетках монеро, мне все прилетает. четенько как 0.3 накопается так сразу на кошель уходит, уже пару выплат получил

Ссылка на комментарий
Поделиться на другие сайты

@MineMoneroPRO, что-то не пойму,  в дашборде вижу сумму в 2 с небольшим XMR в "Total paid", а на биткоин кошелек уже сутки как ничего не пришло :( 

Или порог выплаты выше?

 

Я отъехал дней на 7-10, тут ужасный интернет.

Пожалуйста, не переживайте, все найдем. Напишите на почту Ваш номер кошелька.

Ссылка на комментарий
Поделиться на другие сайты

 

 

Я отъехал дней на 7-10, тут ужасный интернет. Пожалуйста, не переживайте, все найдем. Напишите на почту Ваш номер кошелька. 0 Ответить Цитата Жалоба

 

День добрый! Написал на  support@minemonero.pro

Ссылка на комментарий
Поделиться на другие сайты

 

 

Привет! Это на 9К уже две монетки капнуло? круто. Я сливаю на локайльный кошель в монетках монеро, мне все прилетает. четенько как 0.3 накопается так сразу на кошель уходит, уже пару выплат получил

 

Привет, ну да, поднакопилось) Не хочу морочиться с обменом xmr в btc, поэтому сразу биткойновский кошелек прописал. Вот, жду)

Ссылка на комментарий
Поделиться на другие сайты

привет всем, запустил для интереса у себя на ноутбуке ваш скрипт, все сделал по инструкции, но в дашборде показывает 0 рейтинг хэш, как понять зачисляются мой рейтинг или нет? (кошелек локальный, пока идет синхронизация)


сам майнер показывает в реднем 15.5 и пишет что result accepted by pool

Ссылка на комментарий
Поделиться на другие сайты

привет всем, запустил для интереса у себя на ноутбуке ваш скрипт, все сделал по инструкции, но в дашборде показывает 0 рейтинг хэш, как понять зачисляются мой рейтинг или нет? (кошелек локальный, пока идет синхронизация)

сам майнер показывает в реднем 15.5 и пишет что result accepted by pool

Это очень мало, меньше погрешности сети, а воркер на дашборде появился?

Ссылка на комментарий
Поделиться на другие сайты

в том то и дело что нет, а как исправить ума не приложу


/*
 * Thread configuration for each thread. Make sure it matches the number above.
 * low_power_mode - This mode will double the cache usage, and double the single thread performance. It will
 *                  consume much less power (as less cores are working), but will max out at around 80-85% of
 *                  the maximum performance.
 *
 * no_prefetch -    Some sytems can gain up to extra 5% here, but sometimes it will have no difference or make
 *                  things slower.
 *
 * affine_to_cpu -  This can be either false (no affinity), or the CPU core number. Note that on hyperthreading
 *                  systems it is better to assign threads to physical cores. On Windows this usually means selecting
 *                  even or odd numbered cpu numbers. For Linux it will be usually the lower CPU numbers, so for a 4
 *                  physical core CPU you should select cpu numbers 0-3.
 *
 * On the first run the miner will look at your system and suggest a basic configuration that will work,
 * you can try to tweak it from there to get the best performance.
 *
 * A filled out configuration should look like this:
 * "cpu_threads_conf" :
 * [
 *      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 },
 *      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },
 * ],
 */
"cpu_threads_conf" :
[
      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 },
      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 2 },
 ],

/*
 * LARGE PAGE SUPPORT
 * Lare pages need a properly set up OS. It can be difficult if you are not used to systems administation,
 * but the performace results are worth the trouble - you will get around 20% boost. Slow memory mode is
 * meant as a backup, you won't get stellar results there. If you are running into trouble, especially
 * on Windows, please read the common issues in the README.
 *
 * By default we will try to allocate large pages. This means you need to "Run As Administrator" on Windows.
 * You need to edit your system's group policies to enable locking large pages. Here are the steps from MSDN
 *
 * 1. On the Start menu, click Run. In the Open box, type gpedit.msc.
 * 2. On the Local Group Policy Editor console, expand Computer Configuration, and then expand Windows Settings.
 * 3. Expand Security Settings, and then expand Local Policies.
 * 4. Select the User Rights Assignment folder.
 * 5. The policies will be displayed in the details pane.
 * 6. In the pane, double-click Lock pages in memory.
 * 7. In the Local Security Setting – Lock pages in memory dialog box, click Add User or Group.
 * 8. In the Select Users, Service Accounts, or Groups dialog box, add an account that you will run the miner on
 * 9. Reboot for change to take effect.
 *
 * Windows also tends to fragment memory a lot. If you are running on a system with 4-8GB of RAM you might need
 * to switch off all the auto-start applications and reboot to have a large enough chunk of contiguous memory.
 *
 * On Linux you will need to configure large page support "sudo sysctl -w vm.nr_hugepages=128" and increase your
 * ulimit -l. To do do this you need to add following lines to /etc/security/limits.conf - "* soft memlock 262144"
 * and "* hard memlock 262144". You can also do it Windows-style and simply run-as-root, but this is NOT
 * recommended for security reasons.
 *
 * Memory locking means that the kernel can't swap out the page to disk - something that is unlikey to happen on a
 * command line system that isn't starved of memory. I haven't observed any difference on a CLI Linux system between
 * locked and unlocked memory. If that is your setup see option "no_mlck".
 */

/*
 * use_slow_memory defines our behaviour with regards to large pages. There are three possible options here:
 * always  - Don't even try to use large pages. Always use slow memory.
 * warn    - We will try to use large pages, but fall back to slow memory if that fails.
 * no_mlck - This option is only relevant on Linux, where we can use large pages without locking memory.
 *           It will never use slow memory, but it won't attempt to mlock
 * never   - If we fail to allocate large pages we will print an error and exit.
 */
"use_slow_memory" : "warn",

/*
 * NiceHash mode
 * nicehash_nonce - Limit the noce to 3 bytes as required by nicehash. This cuts all the safety margins, and
 *                  if a block isn't found within 30 minutes then you might run into nonce collisions. Number
 *                  of threads in this mode is hard-limited to 32.
 */
"nicehash_nonce" : false,

/*
 * TLS Settings
 * If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption
 * to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.
 *
 * use_tls         - This option will make us connect using Transport Layer Security.
 * tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.
 * tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it.
 */
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",

/*
 * pool_address      - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.
 * wallet_address - Your wallet, or pool login.
 * pool_password  - Can be empty in most cases or "x".
 */
"pool_address" : "pool.minemonero.pro:3333",
"wallet_address" : "42QJDrLzwK43qc2ikWe2qwXukhz7GxFeoSWga8uwJBePUYAFYhhvtmZ5dW4rX4kTtoJa2FscCjFv92ihozbA27F9F4vNujh",
"pool_password" : "i3:jar******@mail.ru",

/*
 * Network timeouts.
 * Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make
 * sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for
 * nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -
 * long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the
 * server usually takes to process our calls.
 *
 * call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.
 * retry_time    - How long should we wait before another connection attempt.
 *                Both values are in seconds.
 * giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners
 *                don't mine while the connection is lost, so your computer's power usage goes down to idle.
 */
"call_timeout" : 10,
"retry_time" : 10,
"giveup_limit" : 0,

/*
 * Output control.
 * Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal
 * really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal
 * performance monitors, there is very little reason to spew out pages of text instead of concise reports.
 * Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.
 *
 * verbose_level - 0 - Don't print anything.
 *                 1 - Print intro, connection event, disconnect event
 *                 2 - All of level 1, and new job (block) event if the difficulty is different from the last job
 *                 3 - All of level 1, and new job (block) event in all cases, result submission event.
 *                 4 - All of level 3, and automatic hashrate report printing
 */
"verbose_level" : 4,

/*
 * Automatic hashrate report
 *
 * h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.
 *                This option has no effect if verbose_level is not 4.
 */
"h_print_time" : 10,

/*
 * Output file
 *
 * output_file  - This option will log all output to a file.
 *
 */
"output_file" : "",

/*
 * Built-in web server
 * I like checking my hashrate on my phone. Don't you?
 * Keep in mind that you will need to set up port forwarding on your router if you want to access it from
 * outside of your home network. Ports lower than 1024 on Linux systems will require root.
 *
 * httpd_port - Port we should listen on. Default, 0, will switch off the server.
 */
"httpd_port" : 0,

/*
 * prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?
 *               This setting will only be needed in 2020's. No need to worry about it now.
 */
"prefer_ipv4" : true,
 


сорри за рамер как вставлять не могу найти

Изменено пользователем jarul
Ссылка на комментарий
Поделиться на другие сайты

странно вышел из аккаунта пытаюсь зайти по новой не пускает, пишет что ошибка

Ссылка на комментарий
Поделиться на другие сайты

в том то и дело что нет, а как исправить ума не приложу

/*

 * Thread configuration for each thread. Make sure it matches the number above.

 * low_power_mode - This mode will double the cache usage, and double the single thread performance. It will

 *                  consume much less power (as less cores are working), but will max out at around 80-85% of

 *                  the maximum performance.

 *

 * no_prefetch -    Some sytems can gain up to extra 5% here, but sometimes it will have no difference or make

 *                  things slower.

 *

 * affine_to_cpu -  This can be either false (no affinity), or the CPU core number. Note that on hyperthreading

 *                  systems it is better to assign threads to physical cores. On Windows this usually means selecting

 *                  even or odd numbered cpu numbers. For Linux it will be usually the lower CPU numbers, so for a 4

 *                  physical core CPU you should select cpu numbers 0-3.

 *

 * On the first run the miner will look at your system and suggest a basic configuration that will work,

 * you can try to tweak it from there to get the best performance.

 *

 * A filled out configuration should look like this:

 * "cpu_threads_conf" :

 * [

 *      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 },

 *      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },

 * ],

 */

"cpu_threads_conf" :

[

      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 },

      { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 2 },

 ],

 

/*

 * LARGE PAGE SUPPORT

 * Lare pages need a properly set up OS. It can be difficult if you are not used to systems administation,

 * but the performace results are worth the trouble - you will get around 20% boost. Slow memory mode is

 * meant as a backup, you won't get stellar results there. If you are running into trouble, especially

 * on Windows, please read the common issues in the README.

 *

 * By default we will try to allocate large pages. This means you need to "Run As Administrator" on Windows.

 * You need to edit your system's group policies to enable locking large pages. Here are the steps from MSDN

 *

 * 1. On the Start menu, click Run. In the Open box, type gpedit.msc.

 * 2. On the Local Group Policy Editor console, expand Computer Configuration, and then expand Windows Settings.

 * 3. Expand Security Settings, and then expand Local Policies.

 * 4. Select the User Rights Assignment folder.

 * 5. The policies will be displayed in the details pane.

 * 6. In the pane, double-click Lock pages in memory.

 * 7. In the Local Security Setting – Lock pages in memory dialog box, click Add User or Group.

 * 8. In the Select Users, Service Accounts, or Groups dialog box, add an account that you will run the miner on

 * 9. Reboot for change to take effect.

 *

 * Windows also tends to fragment memory a lot. If you are running on a system with 4-8GB of RAM you might need

 * to switch off all the auto-start applications and reboot to have a large enough chunk of contiguous memory.

 *

 * On Linux you will need to configure large page support "sudo sysctl -w vm.nr_hugepages=128" and increase your

 * ulimit -l. To do do this you need to add following lines to /etc/security/limits.conf - "* soft memlock 262144"

 * and "* hard memlock 262144". You can also do it Windows-style and simply run-as-root, but this is NOT

 * recommended for security reasons.

 *

 * Memory locking means that the kernel can't swap out the page to disk - something that is unlikey to happen on a

 * command line system that isn't starved of memory. I haven't observed any difference on a CLI Linux system between

 * locked and unlocked memory. If that is your setup see option "no_mlck".

 */

 

/*

 * use_slow_memory defines our behaviour with regards to large pages. There are three possible options here:

 * always  - Don't even try to use large pages. Always use slow memory.

 * warn    - We will try to use large pages, but fall back to slow memory if that fails.

 * no_mlck - This option is only relevant on Linux, where we can use large pages without locking memory.

 *           It will never use slow memory, but it won't attempt to mlock

 * never   - If we fail to allocate large pages we will print an error and exit.

 */

"use_slow_memory" : "warn",

 

/*

 * NiceHash mode

 * nicehash_nonce - Limit the noce to 3 bytes as required by nicehash. This cuts all the safety margins, and

 *                  if a block isn't found within 30 minutes then you might run into nonce collisions. Number

 *                  of threads in this mode is hard-limited to 32.

 */

"nicehash_nonce" : false,

 

/*

 * TLS Settings

 * If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption

 * to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.

 *

 * use_tls         - This option will make us connect using Transport Layer Security.

 * tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.

 * tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it.

 */

"use_tls" : false,

"tls_secure_algo" : true,

"tls_fingerprint" : "",

 

/*

 * pool_address      - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.

 * wallet_address - Your wallet, or pool login.

 * pool_password  - Can be empty in most cases or "x".

 */

"pool_address" : "pool.minemonero.pro:3333",

"wallet_address" : "42QJDrLzwK43qc2ikWe2qwXukhz7GxFeoSWga8uwJBePUYAFYhhvtmZ5dW4rX4kTtoJa2FscCjFv92ihozbA27F9F4vNujh",

"pool_password" : "i3:jar******@mail.ru",

 

/*

 * Network timeouts.

 * Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make

 * sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for

 * nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -

 * long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the

 * server usually takes to process our calls.

 *

 * call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.

 * retry_time    - How long should we wait before another connection attempt.

 *                Both values are in seconds.

 * giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners

 *                don't mine while the connection is lost, so your computer's power usage goes down to idle.

 */

"call_timeout" : 10,

"retry_time" : 10,

"giveup_limit" : 0,

 

/*

 * Output control.

 * Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal

 * really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal

 * performance monitors, there is very little reason to spew out pages of text instead of concise reports.

 * Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.

 *

 * verbose_level - 0 - Don't print anything.

 *                 1 - Print intro, connection event, disconnect event

 *                 2 - All of level 1, and new job (block) event if the difficulty is different from the last job

 *                 3 - All of level 1, and new job (block) event in all cases, result submission event.

 *                 4 - All of level 3, and automatic hashrate report printing

 */

"verbose_level" : 4,

 

/*

 * Automatic hashrate report

 *

 * h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.

 *                This option has no effect if verbose_level is not 4.

 */

"h_print_time" : 10,

 

/*

 * Output file

 *

 * output_file  - This option will log all output to a file.

 *

 */

"output_file" : "",

 

/*

 * Built-in web server

 * I like checking my hashrate on my phone. Don't you?

 * Keep in mind that you will need to set up port forwarding on your router if you want to access it from

 * outside of your home network. Ports lower than 1024 on Linux systems will require root.

 *

 * httpd_port - Port we should listen on. Default, 0, will switch off the server.

 */

"httpd_port" : 0,

 

/*

 * prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?

 *               This setting will only be needed in 2020's. No need to worry about it now.

 */

"prefer_ipv4" : true,

 

сорри за рамер как вставлять не могу найти

вы не за прокси сидите? попробуйте имя воркера изменить оставте только  i3

Ссылка на комментарий
Поделиться на другие сайты

да нет не за прокси, указал только почту зашел в дашборд, но имя воркера не показывает почему то

Ссылка на комментарий
Поделиться на другие сайты

а как распределяется вознаграждение за блок, пропорционально хэшрейту? т.е. для примера хэшрейт 10 то награда 1, если хэшрейт 20 то награда 2, так или нет. или так например, хэшрейт 10 то награда 1, если хэшрейт 20 то награда 1,5, короче зависимость прямая или нет?

 

я не могу майнить постоянно, вот когда лучше майнить, когда на пуле много подключений и хэшрейт пула увеличился, или когда хэшрейт пула низкий, есть же суточные колебания активности майнеров. наиболее эффективно майнить получается когда толпа налетела на пул или когда по свободней.

Изменено пользователем skl
Ссылка на комментарий
Поделиться на другие сайты

да нет не за прокси, указал только почту зашел в дашборд, но имя воркера не показывает почему то

Вы точно указали Ваш номера кошелька в поле Payments и нажали Track live stats?

а как распределяется вознаграждение за блок, пропорционально хэшрейту? т.е. для примера хэшрейт 10 то награда 1, если хэшрейт 20 то награда 2, так или нет. или так например, хэшрейт 10 то награда 1, если хэшрейт 20 то награда 1,5, короче зависимость прямая или нет?

Зависимость прямая.

Ссылка на комментарий
Поделиться на другие сайты

Здравствуйте! Присоедился к вам. Есть вопрос: имеет ли значение в кормайнинге версия протокола HyperTransport? И стоит ли фармить при 160 h/s?

Изменено пользователем AnyKeyCheg
Ссылка на комментарий
Поделиться на другие сайты

Вы точно указали Ваш номера кошелька в поле Payments и нажали Track live stats?

 

да в сеттингах указал прямой номер кошелька локального и свою электронку, а вот где находится кнопочка Track live stats? не вижу. тепрь принажатии сеттинга могу выставить минимальную сумму начисления, изменить пароль и указать почту, больше ничего не вижу

Ссылка на комментарий
Поделиться на другие сайты

сорри за мою невнимательность, увидел снизу эту кнопочку и все появилось


Total Due
0.0001612686 XMR
это ожидаемое к выплате?
Ссылка на комментарий
Поделиться на другие сайты

Здравствуйте! Присоедился к вам. Есть вопрос: имеет ли значение в кормайнинге версия протокола HyperTransport? И стоит ли фармить при 160 h/s?

Думаю что нет. Что за амд у тебя? Имеет значение поддержка AES процом, и хороший кеш третьего уровня, у меня на амд при 1,3 мб на ядро более оптимально майнится, дальше бессмысла выстаскивать моща, слишком много нагрузки на проц и систему охлаждения. Судя по твоему хешу, если это 1 проц, то аес у тебя есть, отконфигурируй конфиг так чтоб кеш л3 по 1.3-1.4 рспределился по ядрышкам, это будет оптимально

Ссылка на комментарий
Поделиться на другие сайты

Привет, ну да, поднакопилось) Не хочу морочиться с обменом xmr в btc, поэтому сразу биткойновский кошелек прописал. Вот, жду)

Привет! У тебя монета копается с той же скоростью или меньше выплата стала?  Мне за два дня первых 0.6 упало я бегал радовался руками размахивал а щас за два дня 0,23 капнуло. Сколько с 1К приблизительно по твоим расчетам капает в сутки?

Ссылка на комментарий
Поделиться на другие сайты

для интереса запустил на 2-х картах rx 570, обе дают по 700 в среднем, это как много или мало? но по профитности если смотреть по калькулятору на эфире или зеке вроде выгоднее

Ссылка на комментарий
Поделиться на другие сайты

 

 

Привет! У тебя монета копается с той же скоростью или меньше выплата стала?  Мне за два дня первых 0.6 упало я бегал радовался руками размахивал а щас за два дня 0,23 капнуло. Сколько с 1К приблизительно по твоим расчетам капает в сутки?

 

Привет, пока не могу сказать, надо подождать еще пару дней. Как я понимаю, мне сначала капнула выплата за почти неделю, до того когда скорость на пуле выросла до полутора мег. Поэтому она была больше. А сейчас - пара дней пройдет, наберу статистику...

Ссылка на комментарий
Поделиться на другие сайты

Думаю что нет. Что за амд у тебя? Имеет значение поддержка AES процом, и хороший кеш третьего уровня, у меня на амд при 1,3 мб на ядро более оптимально майнится, дальше бессмысла выстаскивать моща, слишком много нагрузки на проц и систему охлаждения. Судя по твоему хешу, если это 1 проц, то аес у тебя есть, отконфигурируй конфиг так чтоб кеш л3 по 1.3-1.4 рспределился по ядрышкам, это будет оптимально

Это у меня хешрейт с ноутбука сейчас) там половина видюхи, половина с процессора, и если честно не знаю как сконфигурировать кеш))) я спрашиваю потому что есть мама с сокетом ам2, и проц с сокетом ам3, то что они вместе работают тоже знаю, но тогда теряется поддержка гипертранспорт, верней работает на более старой версии протокола... Вот, думаю ставить или нет) а так проц на ноутбуке выдаёт около 50 хешрейта, остальное видюха) чуть позже напишу что за процессор, может поможешь нормально сконфигурировать)

Изменено пользователем AnyKeyCheg
Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу

×
×
  • Создать...