Перейти к содержанию

Настройка gtx 1060 под Linux


iBaaX

Рекомендуемые сообщения

41 минуту назад, r9380 сказал:

Решил, я повторить твою конфигурацию, только вот незадача ASUS Z270-p + 2xM2 + 2 1x4 это 14 карт, а не 16 ... Ещё и заморачивалься скрины рисовал ...

Действительно, 3 шт. 1х4.

Ссылка на комментарий
Поделиться на другие сайты

Поделюсь опытом.

Возникла проблема когда на исправно работающем риге с пятью картами, после установки шестой, не генериться xorg.conf

 

Есть ASUS H110M-K (2 PCI-E 1X, 1 PCI-E 16X) под Ubuntu 16.04

В первый PCI-E 1X воткнут сплиттер на 4 входа к нему подключены 4 райзера, во второй PCI-E 1X воткнут пятый райзер .- по такой схеме 5 GTX1060 работают прекрасно.

Решил докупить шестую GTX1060 и воткнуть через райзер в последний свободный порт PCI-E 16X.

Воткнул, обновил список PCI портов sudo udate-pciids,

проверил как система видит карты через lspci | grep VGA.

Система видит все 6 карт + 1 встроенную от Intel.

Пытаюсь создать новый xorg.conf через nvidia-xconfig и начинается трабл: 

 

WARNING: Unable to use the nvidia-cfg library to query NVIDIA hardware.
ERROR: Unable to determine number of GPUs in system; cannot honor '--enable-all-gpus' option.

Отключаю шестую карту, генерю xorg.conf – всё взлетает, добавляю 6-ую карту – xorg.conf  не генерится.

 

Решение нашёл здесь https://ubuntuforums.org/showthread.php?t=1684460

 

Сделал следующее:

sudo nano /etc/default/grub

нашёл там строку

GRUB_CMDLINE_LINUX_DEFAULT=""

и дописал в кавычках quiet splash

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

сохранился.

Затем:

sudo update-grub

sudo reboot

После ребута xorg.conf сгенерился с первого раза и всё заработало.

P.S. На форуме, где я нашёл решение своей проблемы, у чувака в кавычках уже стояло quiet splash и он менял его на quiet splash vmalloc=256M ,

но мне хватило только добавления в пустые кавычки quiet splash.

Изменено пользователем Nosych
Дополнение
Ссылка на комментарий
Поделиться на другие сайты

В 22.11.2017 в 10:26, Dropshot сказал:

@Nosych 

А монитор подключен? К какой карте, если подключен?

 

Нет. Всё по SSH.

Ссылка на комментарий
Поделиться на другие сайты

  • 2 недели спустя...

Всем доброго дня. 

Поставил ригу на 13 Р106-100 6Gb , в стоке пашут нормально, но разогнать никак не выходит. Просто пункты разгона даже не появляются в nvidia-settings 

Linux 16.04

Xoorg.conf формирую командой sudo nvidia-xconfig --enable-all-gpus --allow-empty-initial-configuration --cool-bits=31 --depth=8 --mode=640x480 --no-sli

но после перезагрузки изменения в файле пропадают. что я делаю не так?

 

Ссылка на комментарий
Поделиться на другие сайты

8 минут назад, asaer сказал:

но после перезагрузки изменения в файле пропадают. что я делаю не так?

после окончания редактирования xorg.conf и перед перезагрузкой дай такую команду:

sudo chattr +i /etc/X11/xorg.conf

и будет тебе счастье. Эта команда запрещает изменение файла xorg.conf кем бы то ни было. Если захочешь снова редактировать, та же команда, только ключ "-i"

Ссылка на комментарий
Поделиться на другие сайты

@Torquemada 

а в таком случае иксы вообще вываливаются с ошибкой

Скрытый текст

[    54.582] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    54.582] X Protocol Version 11, Revision 0
[    54.582] Build Operating System: Linux 4.4.0-59-generic x86_64 Ubuntu
[    54.582] Current Operating System: Linux cit1-desktop 4.10.0-40-generic #44~16.04.1-Ubuntu SMP Thu Nov 9 15:37:44 UTC 2017 x86_64
[    54.582] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-40-generic root=UUID=d9313532-f462-4414-8ae7-316a9e083397 ro quiet splash vt.handoff=7
[    54.582] Build Date: 26 January 2017  12:26:18AM
[    54.582] xorg-server 2:1.18.4-1ubuntu6.1~16.04.1 (For technical support please see http://www.ubuntu.com/support)
[    54.582] Current version of pixman: 0.33.6
[    54.582]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    54.582] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    54.582] (==) Log file: "/var/log/Xorg.1.log", Time: Mon Dec  4 20:59:40 2017
[    54.582] (==) Using config file: "/etc/X11/xorg.conf"
[    54.582] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    54.582] Data incomplete in file /etc/X11/xorg.conf
    Undefined Device "intel" referenced by ServerLayout "layout".
[    54.582] (EE) Problem parsing the config file
[    54.582] (EE) Error parsing the config file
[    54.582] (EE) 
Fatal server error:
[    54.582] (EE) no screens found(EE) 
[    54.582] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[    54.582] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[    54.582] (EE) 
[    54.582] (EE) Server terminated with error (1). Closing log file.

 

Изменено пользователем asaer
Ссылка на комментарий
Поделиться на другие сайты

--depth=8 --mode=640x480 --no-sli  Явно лишнее.

Сгенеренный конфиг в студию. (Судя по логу отсутствуют секции screen)

Изменено пользователем Shevchik
Ссылка на комментарий
Поделиться на другие сайты

вот так выглядит после прописания команды без последних ключей

Скрытый текст

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 387.34  (buildmeister@swio-display-x64-rhel04-15)  Tue Nov 21 03:31:45 PST 2017

Section "ServerLayout"
    Identifier     "layout"
    Screen      0  "Screen0"
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    Screen      3  "Screen3" RightOf "Screen2"
    Screen      4  "Screen4" RightOf "Screen3"
    Screen      5  "Screen5" RightOf "Screen4"
    Screen      6  "Screen6" RightOf "Screen5"
    Screen      7  "Screen7" RightOf "Screen6"
    Screen      8  "Screen8" RightOf "Screen7"
    Screen      9  "Screen9" RightOf "Screen8"
    Screen     10  "Screen10" RightOf "Screen9"
    Screen     11  "Screen11" RightOf "Screen10"
    Screen     12  "Screen12" RightOf "Screen11"
    Inactive       "intel"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor4"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor5"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor6"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor7"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor8"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor9"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor10"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor11"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor12"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:2:0:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:3:0:0"
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:4:0:0"
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:5:0:0"
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:6:0:0"
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:9:0:0"
EndSection

Section "Device"
    Identifier     "Device7"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:10:0:0"
EndSection

Section "Device"
    Identifier     "Device8"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:11:0:0"
EndSection

Section "Device"
    Identifier     "Device9"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:12:0:0"
EndSection

Section "Device"
    Identifier     "Device10"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:13:0:0"
EndSection

Section "Device"
    Identifier     "Device11"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:14:0:0"
EndSection

Section "Device"
    Identifier     "Device12"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "P106-100"
    BusID          "PCI:15:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Device4"
    Monitor        "Monitor4"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen5"
    Device         "Device5"
    Monitor        "Monitor5"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen6"
    Device         "Device6"
    Monitor        "Monitor6"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen7"
    Device         "Device7"
    Monitor        "Monitor7"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen8"
    Device         "Device8"
    Monitor        "Monitor8"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen9"
    Device         "Device9"
    Monitor        "Monitor9"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen10"
    Device         "Device10"
    Monitor        "Monitor10"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen11"
    Device         "Device11"
    Monitor        "Monitor11"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen12"
    Device         "Device12"
    Monitor        "Monitor12"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
 

Но после перезагрузки все равно восстанавливает файл по умолчанию

лог файл 

Скрытый текст

[    10.189] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    10.189] X Protocol Version 11, Revision 0
[    10.189] Build Operating System: Linux 4.4.0-59-generic x86_64 Ubuntu
[    10.189] Current Operating System: Linux cit1-desktop 4.10.0-40-generic #44~16.04.1-Ubuntu SMP Thu Nov 9 15:37:44 UTC 2017 x86_64
[    10.189] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-40-generic root=UUID=d9313532-f462-4414-8ae7-316a9e083397 ro quiet splash vt.handoff=7
[    10.189] Build Date: 26 January 2017  12:26:18AM
[    10.189] xorg-server 2:1.18.4-1ubuntu6.1~16.04.1 (For technical support please see http://www.ubuntu.com/support)
[    10.189] Current version of pixman: 0.33.6
[    10.189]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    10.189] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.189] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec  4 23:20:32 2017
[    10.192] (==) Using config file: "/etc/X11/xorg.conf"
[    10.192] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    10.192] (==) ServerLayout "layout"
[    10.192] (**) |-->Screen "nvidia" (0)
[    10.192] (**) |   |-->Monitor "<default monitor>"
[    10.193] (**) |   |-->Device "nvidia"
[    10.193] (**) |   |-->GPUDevice "nvidia"
[    10.193] (**) |   |-->GPUDevice "nvidia"
[    10.193] (**) |   |-->GPUDevice "nvidia"
[    10.193] (**) |   |-->GPUDevice "nvidia"
[    10.193] (==) No monitor specified for screen "nvidia".
    Using a default monitor configuration.
[    10.193] (**) |-->Inactive Device "intel"
[    10.193] (==) Automatically adding devices
[    10.193] (==) Automatically enabling devices
[    10.193] (==) Automatically adding GPU devices
[    10.193] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    10.193] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    10.193]     Entry deleted from font path.
[    10.193] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    10.193]     Entry deleted from font path.
[    10.193] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    10.193]     Entry deleted from font path.
[    10.193] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    10.193]     Entry deleted from font path.
[    10.193] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    10.193]     Entry deleted from font path.
[    10.193] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    10.193] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    10.193] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.194] (II) Loader magic: 0x561001eb1dc0
[    10.194] (II) Module ABI versions:
[    10.194]     X.Org ANSI C Emulation: 0.4
[    10.194]     X.Org Video Driver: 20.0
[    10.194]     X.Org XInput driver : 22.1
[    10.194]     X.Org Server Extension : 9.0
[    10.194] (++) using VT number 7

[    10.194] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    10.196] (II) xfree86: Adding drm device (/dev/dri/card0)
[    10.196] (II) xfree86: Adding drm device (/dev/dri/card13)
[    10.202] (II) xfree86: Adding drm device (/dev/dri/card1)
[    10.202] (II) xfree86: Adding drm device (/dev/dri/card2)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card3)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card4)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card5)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card6)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card7)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card8)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card9)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card10)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card11)
[    10.203] (II) xfree86: Adding drm device (/dev/dri/card12)
[    10.214] (--) PCI:*(0:0:2:0) 8086:5902:1849:5902 rev 4, Mem @ 0xe9000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    10.214] (--) PCI: (0:1:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xf6000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432
[    10.214] (--) PCI: (0:2:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xf5000000/16777216, 0x2fe0000000/268435456, 0x2ff0000000/33554432
[    10.214] (--) PCI: (0:3:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xf4000000/16777216, 0x2fc0000000/268435456, 0x2fd0000000/33554432
[    10.214] (--) PCI: (0:4:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xf3000000/16777216, 0x2fa0000000/268435456, 0x2fb0000000/33554432
[    10.214] (--) PCI: (0:5:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xf2000000/16777216, 0x2f80000000/268435456, 0x2f90000000/33554432
[    10.214] (--) PCI: (0:6:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xf1000000/16777216, 0x2f60000000/268435456, 0x2f70000000/33554432
[    10.214] (--) PCI: (0:9:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xf0000000/16777216, 0x2f40000000/268435456, 0x2f50000000/33554432
[    10.214] (--) PCI: (0:10:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xef000000/16777216, 0x2f20000000/268435456, 0x2f30000000/33554432
[    10.214] (--) PCI: (0:11:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xee000000/16777216, 0x2f00000000/268435456, 0x2f10000000/33554432
[    10.214] (--) PCI: (0:12:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xed000000/16777216, 0x2ee0000000/268435456, 0x2ef0000000/33554432
[    10.214] (--) PCI: (0:13:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xec000000/16777216, 0x2ec0000000/268435456, 0x2ed0000000/33554432
[    10.214] (--) PCI: (0:14:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xeb000000/16777216, 0x2ea0000000/268435456, 0x2eb0000000/33554432
[    10.214] (--) PCI: (0:15:0:0) 10de:1c07:1458:377b rev 161, Mem @ 0xea000000/16777216, 0x2e80000000/268435456, 0x2e90000000/33554432
[    10.214] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    10.214] (II) "glx" will be loaded by default.
[    10.214] (II) LoadModule: "glx"
[    10.216] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    10.295] (II) Module glx: vendor="NVIDIA Corporation"
[    10.295]     compiled for 4.0.2, module version = 1.0.0
[    10.295]     Module class: X.Org Server Extension
[    10.295] (II) NVIDIA GLX Module  387.34  Tue Nov 21 02:04:31 PST 2017
[    10.296] (II) LoadModule: "nvidia"
[    10.296] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    10.305] (II) Module nvidia: vendor="NVIDIA Corporation"
[    10.305]     compiled for 4.0.2, module version = 1.0.0
[    10.305]     Module class: X.Org Video Driver
[    10.306] (II) LoadModule: "modesetting"
[    10.306] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    10.307] (II) Module modesetting: vendor="X.Org Foundation"
[    10.307]     compiled for 1.18.4, module version = 1.18.4
[    10.307]     Module class: X.Org Video Driver
[    10.307]     ABI class: X.Org Video Driver, version 20.0
[    10.307] (II) NVIDIA dlloader X Driver  387.34  Tue Nov 21 01:38:22 PST 2017
[    10.307] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    10.308] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    10.310] (II) Loading sub module "fb"
[    10.310] (II) LoadModule: "fb"
[    10.311] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.313] (II) Module fb: vendor="X.Org Foundation"
[    10.313]     compiled for 1.18.4, module version = 1.0.0
[    10.313]     ABI class: X.Org ANSI C Emulation, version 0.4
[    10.313] (II) Loading sub module "wfb"
[    10.313] (II) LoadModule: "wfb"
[    10.313] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    10.315] (II) Module wfb: vendor="X.Org Foundation"
[    10.315]     compiled for 1.18.4, module version = 1.0.0
[    10.315]     ABI class: X.Org ANSI C Emulation, version 0.4
[    10.315] (II) Loading sub module "ramdac"
[    10.315] (II) LoadModule: "ramdac"
[    10.315] (II) Module "ramdac" already built-in
[    11.252] (II) modeset(G0): using drv /dev/dri/card13
[    11.252] (EE) Screen 1 deleted because of no matching config section.
[    11.252] (II) UnloadModule: "nvidia"
[    11.252] (II) UnloadSubModule: "wfb"
[    11.252] (II) UnloadSubModule: "fb"
[    11.252] (EE) Screen 1 deleted because of no matching config section.
[    11.252] (II) UnloadModule: "nvidia"
[    11.252] (II) UnloadSubModule: "wfb"
[    11.252] (II) UnloadSubModule: "fb"
[    11.252] (EE) Screen 1 deleted because of no matching config section.
[    11.252] (II) UnloadModule: "nvidia"
[    11.252] (II) UnloadSubModule: "wfb"
[    11.252] (II) UnloadSubModule: "fb"
[    11.253] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "nvidia" for depth/fbbpp 24/32
[    11.253] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    11.253] (==) NVIDIA(0): RGB weight 888
[    11.253] (==) NVIDIA(0): Default visual is TrueColor
[    11.253] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    11.254] (**) NVIDIA(0): Option "ConstrainCursor" "off"
[    11.254] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
[    11.254] (**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
[    11.254] (**) NVIDIA(0): Enabling 2D acceleration
[    25.001] (II) NVIDIA(0): NVIDIA GPU P106-100 (GP106-A) at PCI:1:0:0 (GPU-0)
[    25.001] (--) NVIDIA(0): Memory: 6291456 kBytes
[    25.001] (--) NVIDIA(0): VideoBIOS: 86.06.58.00.21
[    25.001] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    25.001] (II) NVIDIA(0): Validated MetaModes:
[    25.001] (II) NVIDIA(0):     "NULL"
[    25.001] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    25.001] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    25.001] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    25.001] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    25.001] (**) modeset(G0): Option "AccelMethod" "None"
[    25.001] (==) modeset(G0): RGB weight 888
[    25.001] (==) modeset(G0): Default visual is TrueColor
[    25.001] (**) modeset(G0): glamor disabled
[    25.001] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[    25.074] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    25.074] (II) modeset(G0): Output DP-1-1 has no monitor section
[    25.146] (II) modeset(G0): EDID for output HDMI-1-1
[    25.146] (II) modeset(G0): Manufacturer: HWP  Model: 3320  Serial#: 1
[    25.146] (II) modeset(G0): Year: 2017  Week: 21
[    25.146] (II) modeset(G0): EDID Version: 1.3
[    25.146] (II) modeset(G0): Digital Display Input
[    25.146] (II) modeset(G0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    25.146] (II) modeset(G0): Gamma: 2.20
[    25.146] (II) modeset(G0): DPMS capabilities: Off
[    25.146] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    25.146] (II) modeset(G0): First detailed timing is preferred mode
[    25.146] (II) modeset(G0): redX: 0.651 redY: 0.336   greenX: 0.320 greenY: 0.609
[    25.146] (II) modeset(G0): blueX: 0.152 blueY: 0.061   whiteX: 0.312 whiteY: 0.328
[    25.146] (II) modeset(G0): Supported established timings:
[    25.146] (II) modeset(G0): 720x400@70Hz
[    25.146] (II) modeset(G0): 640x480@60Hz
[    25.146] (II) modeset(G0): 800x600@60Hz
[    25.146] (II) modeset(G0): 1024x768@60Hz
[    25.146] (II) modeset(G0): Manufacturer's mask: 0
[    25.146] (II) modeset(G0): Supported standard timings:
[    25.146] (II) modeset(G0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    25.146] (II) modeset(G0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    25.146] (II) modeset(G0): #2: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    25.146] (II) modeset(G0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    25.146] (II) modeset(G0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    25.146] (II) modeset(G0): #5: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    25.146] (II) modeset(G0): #6: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    25.146] (II) modeset(G0): Supported detailed timing:
[    25.146] (II) modeset(G0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    25.146] (II) modeset(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    25.146] (II) modeset(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    25.146] (II) modeset(G0): Ranges: V min: 50 V max: 60 Hz, H min: 30 H max: 80 kHz, PixClock max 175 MHz
[    25.146] (II) modeset(G0): Monitor name: HP 24es
[    25.146] (II) modeset(G0): Serial No: 3CM7210G10
[    25.146] (II) modeset(G0): Supported detailed timing:
[    25.146] (II) modeset(G0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    25.146] (II) modeset(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    25.146] (II) modeset(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    25.146] (II) modeset(G0): Supported detailed timing:
[    25.146] (II) modeset(G0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    25.146] (II) modeset(G0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    25.146] (II) modeset(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    25.146] (II) modeset(G0): Supported detailed timing:
[    25.146] (II) modeset(G0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    25.146] (II) modeset(G0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    25.146] (II) modeset(G0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    25.146] (II) modeset(G0): Supported detailed timing:
[    25.146] (II) modeset(G0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    25.146] (II) modeset(G0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    25.146] (II) modeset(G0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    25.146] (II) modeset(G0): Supported detailed timing:
[    25.146] (II) modeset(G0): clock: 27.0 MHz   Image Size:  527 x 296 mm
[    25.146] (II) modeset(G0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    25.146] (II) modeset(G0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    25.146] (II) modeset(G0): Number of EDID sections to follow: 1
[    25.146] (II) modeset(G0): EDID (in hex):
[    25.146] (II) modeset(G0):     00ffffffffffff0022f0203301000000
[    25.146] (II) modeset(G0):     151b010380351e782ac020a656529c27
[    25.146] (II) modeset(G0):     0f5054a10800d1c0b300a9c095008180
[    25.146] (II) modeset(G0):     810081c00101023a801871382d40582c
[    25.146] (II) modeset(G0):     45000f282100001e000000fd00323c1e
[    25.146] (II) modeset(G0):     5011000a202020202020000000fc0048
[    25.146] (II) modeset(G0):     5020323465730a2020202020000000ff
[    25.146] (II) modeset(G0):     0033434d373231304731302020200195
[    25.146] (II) modeset(G0):     020319b149901f041303120102116703
[    25.146] (II) modeset(G0):     0c0010000022e2002b023a801871382d
[    25.146] (II) modeset(G0):     40582c45000f282100001e023a80d072
[    25.146] (II) modeset(G0):     382d40102c45800f282100001e011d00
[    25.146] (II) modeset(G0):     7251d01e206e2855000f282100001e01
[    25.146] (II) modeset(G0):     1d00bc52d01e20b82855400f28210000
[    25.146] (II) modeset(G0):     1e8c0ad08a20e02d10103e96000f2821
[    25.146] (II) modeset(G0):     0000180000000000000000000000000b
[    25.146] (--) modeset(G0): HDMI max TMDS frequency 170000KHz
[    25.146] (II) modeset(G0): Printing probed modes for output HDMI-1-1
[    25.146] (II) modeset(G0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    25.146] (II) modeset(G0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    25.146] (II) modeset(G0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    25.146] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    25.146] (II) modeset(G0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    25.146] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.146] (II) modeset(G0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    25.146] (II) modeset(G0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    25.146] (II) modeset(G0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    25.146] (II) modeset(G0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    25.146] (II) modeset(G0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    25.146] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.146] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.146] (II) modeset(G0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    25.146] (II) modeset(G0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    25.146] (II) modeset(G0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    25.146] (II) modeset(G0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.146] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.146] (II) modeset(G0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.146] (II) modeset(G0): EDID for output DP-1-1
[    25.146] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    25.146] (==) modeset(G0): DPI set to (96, 96)
[    25.146] (II) Loading sub module "fb"
[    25.146] (II) LoadModule: "fb"
[    25.146] (II) Loading /usr/lib/xorg/modules/libfb.so
[    25.146] (II) Module fb: vendor="X.Org Foundation"
[    25.146]     compiled for 1.18.4, module version = 1.0.0
[    25.147]     ABI class: X.Org ANSI C Emulation, version 0.4
[    25.147] (II) Loading sub module "shadow"
[    25.147] (II) LoadModule: "shadow"
[    25.147] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    25.147] (II) Module shadow: vendor="X.Org Foundation"
[    25.147]     compiled for 1.18.4, module version = 1.1.0
[    25.147]     ABI class: X.Org ANSI C Emulation, version 0.4
[    25.147] (--) Depth 24 pixmap format is 32 bpp
[    25.149] (==) modeset(G0): Backing store enabled
[    25.149] (==) modeset(G0): Silken mouse enabled
[    25.149] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    25.173] (==) modeset(G0): DPMS enabled
[    25.173] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[    25.173] (WW) modeset(G0): Option "IgnoreDisplayDevices" is not used
[    25.241] (II) NVIDIA(GPU-1): NVIDIA GPU P106-100 (GP106-A) at PCI:2:0:0 (GPU-1)
[    25.241] (--) NVIDIA(GPU-1): Memory: 6291456 kBytes
[    25.241] (--) NVIDIA(GPU-1): VideoBIOS: 86.06.58.00.21
[    25.241] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[    25.289] (II) NVIDIA(GPU-2): NVIDIA GPU P106-100 (GP106-A) at PCI:3:0:0 (GPU-2)
[    25.289] (--) NVIDIA(GPU-2): Memory: 6291456 kBytes
[    25.289] (--) NVIDIA(GPU-2): VideoBIOS: 86.06.58.00.21
[    25.289] (II) NVIDIA(GPU-2): Detected PCI Express Link width: 16X
[    25.331] (II) NVIDIA(GPU-3): NVIDIA GPU P106-100 (GP106-A) at PCI:4:0:0 (GPU-3)
[    25.331] (--) NVIDIA(GPU-3): Memory: 6291456 kBytes
[    25.331] (--) NVIDIA(GPU-3): VideoBIOS: 86.06.58.00.21
[    25.331] (II) NVIDIA(GPU-3): Detected PCI Express Link width: 16X
[    25.416] (II) NVIDIA(GPU-4): NVIDIA GPU P106-100 (GP106-A) at PCI:5:0:0 (GPU-4)
[    25.416] (--) NVIDIA(GPU-4): Memory: 6291456 kBytes
[    25.416] (--) NVIDIA(GPU-4): VideoBIOS: 86.06.58.00.21
[    25.416] (II) NVIDIA(GPU-4): Detected PCI Express Link width: 16X
[    26.954] (II) NVIDIA(GPU-5): NVIDIA GPU P106-100 (GP106-A) at PCI:6:0:0 (GPU-5)
[    26.954] (--) NVIDIA(GPU-5): Memory: 6291456 kBytes
[    26.954] (--) NVIDIA(GPU-5): VideoBIOS: 86.06.58.00.21
[    26.954] (II) NVIDIA(GPU-5): Detected PCI Express Link width: 16X
[    27.750] (II) NVIDIA(GPU-6): NVIDIA GPU P106-100 (GP106-A) at PCI:9:0:0 (GPU-6)
[    27.750] (--) NVIDIA(GPU-6): Memory: 6291456 kBytes
[    27.750] (--) NVIDIA(GPU-6): VideoBIOS: 86.06.58.00.21
[    27.750] (II) NVIDIA(GPU-6): Detected PCI Express Link width: 16X
[    28.534] (II) NVIDIA(GPU-7): NVIDIA GPU P106-100 (GP106-A) at PCI:10:0:0 (GPU-7)
[    28.534] (--) NVIDIA(GPU-7): Memory: 6291456 kBytes
[    28.534] (--) NVIDIA(GPU-7): VideoBIOS: 86.06.58.00.21
[    28.534] (II) NVIDIA(GPU-7): Detected PCI Express Link width: 16X
[    29.322] (II) NVIDIA(GPU-8): NVIDIA GPU P106-100 (GP106-A) at PCI:11:0:0 (GPU-8)
[    29.322] (--) NVIDIA(GPU-8): Memory: 6291456 kBytes
[    29.322] (--) NVIDIA(GPU-8): VideoBIOS: 86.06.58.00.21
[    29.322] (II) NVIDIA(GPU-8): Detected PCI Express Link width: 16X
[    30.206] (II) NVIDIA(GPU-9): NVIDIA GPU P106-100 (GP106-A) at PCI:12:0:0 (GPU-9)
[    30.206] (--) NVIDIA(GPU-9): Memory: 6291456 kBytes
[    30.206] (--) NVIDIA(GPU-9): VideoBIOS: 86.06.58.00.21
[    30.206] (II) NVIDIA(GPU-9): Detected PCI Express Link width: 16X
[    31.028] (II) NVIDIA(GPU-10): NVIDIA GPU P106-100 (GP106-A) at PCI:13:0:0 (GPU-10)
[    31.028] (--) NVIDIA(GPU-10): Memory: 6291456 kBytes
[    31.028] (--) NVIDIA(GPU-10): VideoBIOS: 86.06.58.00.21
[    31.028] (II) NVIDIA(GPU-10): Detected PCI Express Link width: 16X
[    31.975] (II) NVIDIA(GPU-11): NVIDIA GPU P106-100 (GP106-A) at PCI:14:0:0 (GPU-11)
[    31.975] (--) NVIDIA(GPU-11): Memory: 6291456 kBytes
[    31.975] (--) NVIDIA(GPU-11): VideoBIOS: 86.06.58.00.21
[    31.975] (II) NVIDIA(GPU-11): Detected PCI Express Link width: 16X
[    33.320] (II) NVIDIA(GPU-12): NVIDIA GPU P106-100 (GP106-A) at PCI:15:0:0 (GPU-12)
[    33.320] (--) NVIDIA(GPU-12): Memory: 6291456 kBytes
[    33.320] (--) NVIDIA(GPU-12): VideoBIOS: 86.06.58.00.21
[    33.320] (II) NVIDIA(GPU-12): Detected PCI Express Link width: 16X
[    33.873] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[    33.873] (II) NVIDIA:     access.
[    33.924] (II) NVIDIA(0): Setting mode "NULL"
[    33.943] (==) NVIDIA(0): Disabling shared memory pixmaps
[    33.943] (==) NVIDIA(0): Backing store enabled
[    33.943] (==) NVIDIA(0): Silken mouse enabled
[    33.943] (==) NVIDIA(0): DPMS enabled
[    33.944] (II) Loading sub module "dri2"
[    33.944] (II) LoadModule: "dri2"
[    33.944] (II) Module "dri2" already built-in
[    33.944] (II) NVIDIA(0): [DRI2] Setup complete
[    33.944] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    33.944] (--) RandR disabled
[    33.946] (II) SELinux: Disabled on system
[    33.948] (II) Initializing extension GLX
[    33.948] (II) Indirect GLX disabled.
[    33.948] (II) modeset(G0): Damage tracking initialized
[    34.157] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    34.157] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.157] (II) LoadModule: "evdev"
[    34.157] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.162] (II) Module evdev: vendor="X.Org Foundation"
[    34.162]     compiled for 1.18.4, module version = 2.10.2
[    34.162]     Module class: X.Org XInput Driver
[    34.162]     ABI class: X.Org XInput driver, version 22.1
[    34.162] (II) Using input driver 'evdev' for 'Power Button'
[    34.162] (**) Power Button: always reports core events
[    34.162] (**) evdev: Power Button: Device: "/dev/input/event2"
[    34.162] (--) evdev: Power Button: Vendor 0 Product 0x1
[    34.162] (--) evdev: Power Button: Found keys
[    34.162] (II) evdev: Power Button: Configuring as keyboard
[    34.162] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    34.162] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    34.162] (**) Option "xkb_rules" "evdev"
[    34.162] (**) Option "xkb_model" "pc105"
[    34.162] (**) Option "xkb_layout" "us,ru"
[    34.162] (**) Option "xkb_variant" ","
[    34.162] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    34.175] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    34.175] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    34.175] (II) Using input driver 'evdev' for 'Video Bus'
[    34.175] (**) Video Bus: always reports core events
[    34.175] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    34.175] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    34.175] (--) evdev: Video Bus: Found keys
[    34.175] (II) evdev: Video Bus: Configuring as keyboard
[    34.175] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4"
[    34.175] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    34.175] (**) Option "xkb_rules" "evdev"
[    34.175] (**) Option "xkb_model" "pc105"
[    34.175] (**) Option "xkb_layout" "us,ru"
[    34.175] (**) Option "xkb_variant" ","
[    34.175] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    34.176] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    34.176] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.176] (II) Using input driver 'evdev' for 'Power Button'
[    34.176] (**) Power Button: always reports core events
[    34.176] (**) evdev: Power Button: Device: "/dev/input/event1"
[    34.176] (--) evdev: Power Button: Vendor 0 Product 0x1
[    34.176] (--) evdev: Power Button: Found keys
[    34.176] (II) evdev: Power Button: Configuring as keyboard
[    34.176] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    34.176] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    34.176] (**) Option "xkb_rules" "evdev"
[    34.176] (**) Option "xkb_model" "pc105"
[    34.176] (**) Option "xkb_layout" "us,ru"
[    34.176] (**) Option "xkb_variant" ","
[    34.176] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    34.176] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    34.176] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    34.176] (II) Using input driver 'evdev' for 'Sleep Button'
[    34.176] (**) Sleep Button: always reports core events
[    34.176] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    34.176] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    34.176] (--) evdev: Sleep Button: Found keys
[    34.176] (II) evdev: Sleep Button: Configuring as keyboard
[    34.176] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    34.176] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    34.176] (**) Option "xkb_rules" "evdev"
[    34.176] (**) Option "xkb_model" "pc105"
[    34.176] (**) Option "xkb_layout" "us,ru"
[    34.176] (**) Option "xkb_variant" ","
[    34.176] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    34.177] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[    34.177] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    34.177] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    34.177] (**) Logitech USB Optical Mouse: always reports core events
[    34.177] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
[    34.236] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[    34.236] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[    34.236] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    34.236] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    34.236] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    34.236] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    34.236] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    34.236] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    34.236] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C077.0001/input/input7/event5"
[    34.236] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[    34.236] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    34.236] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    34.236] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    34.236] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    34.236] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    34.236] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    34.236] (II) No input driver specified, ignoring this device.
[    34.236] (II) This device may have been added with another device file.
[    34.237] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[    34.237] (II) No input driver specified, ignoring this device.
[    34.237] (II) This device may have been added with another device file.
[    34.237] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[    34.237] (II) No input driver specified, ignoring this device.
[    34.237] (II) This device may have been added with another device file.
[    34.237] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[    34.237] (II) No input driver specified, ignoring this device.
[    34.237] (II) This device may have been added with another device file.
[    34.238] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    34.238] (II) No input driver specified, ignoring this device.
[    34.238] (II) This device may have been added with another device file.
[    34.238] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[    34.238] (II) No input driver specified, ignoring this device.
[    34.238] (II) This device may have been added with another device file.
[    34.238] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[    34.238] (II) No input driver specified, ignoring this device.
[    34.238] (II) This device may have been added with another device file.
[    34.238] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[    34.238] (II) No input driver specified, ignoring this device.
[    34.238] (II) This device may have been added with another device file.
[    34.238] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[    34.238] (II) No input driver specified, ignoring this device.
[    34.238] (II) This device may have been added with another device file.
[    34.238] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    34.238] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    34.238] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    34.238] (**) AT Translated Set 2 keyboard: always reports core events
[    34.238] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    34.238] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    34.238] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    34.238] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    34.238] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    34.238] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    34.238] (**) Option "xkb_rules" "evdev"
[    34.238] (**) Option "xkb_model" "pc105"
[    34.238] (**) Option "xkb_layout" "us,ru"
[    34.238] (**) Option "xkb_variant" ","
[    34.238] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    34.385] (--) modeset(G0): HDMI max TMDS frequency 170000KHz
[    36.784] (--) modeset(G0): HDMI max TMDS frequency 170000KHz
[    38.530] (--) modeset(G0): HDMI max TMDS frequency 170000KHz
[    55.207] (--) modeset(G0): HDMI max TMDS frequency 170000KHz
[    57.654] (--) modeset(G0): HDMI max TMDS frequency 170000KHz
[    58.980] (--) modeset(G0): HDMI max TMDS frequency 170000KHz
[    59.876] (--) modeset(G0): HDMI max TMDS frequency 170000KHz
[    69.329] (--) modeset(G0): HDMI max TMDS frequency 170000KHz

 

Изменено пользователем asaer
Ссылка на комментарий
Поделиться на другие сайты

  • 2 недели спустя...
On 12/4/2017 at 5:46 PM, asaer said:

Всем доброго дня. 

Поставил ригу на 13 Р106-100 6Gb , в стоке пашут нормально, но разогнать никак не выходит. Просто пункты разгона даже не появляются в nvidia-settings 

Linux 16.04

Xoorg.conf формирую командой sudo nvidia-xconfig --enable-all-gpus --allow-empty-initial-configuration --cool-bits=31 --depth=8 --mode=640x480 --no-sli

но после перезагрузки изменения в файле пропадают. что я делаю не так?

 

Элементарно, это gpu-manager перетирает конфиг. Добавь кей "nogpumanager" в конфиг ядра

 

# Добавь nogpumanager в параметры ядра
# Должно получиться то-то наподобие GRUB_CMDLINE_LINUX_DEFAULT="nosplash nogpumanager"
user@host:/tmp$ sudo vim /etc/default/grub

# Применяем изменения
user@host:/tmp$ sudo update-grub
user@host:/tmp$ sudo update-initramfs -u

# К чертям старые конфиги
user@host:/tmp$ sudo rm -rf /etc/X11/xorg.con*; 
user@host:/tmp$ sudo mkdir /etc/X11/xorg.conf.d; 

# Генерим новое
user@host:/tmp$ sudo nvidia-xconfig --allow-empty-initial-configuration --enable-all-gpus --cool-bits=31 -o /etc/X11/xorg.conf.d/20-nvidia.conf
user@host:/tmp$ sudo reboot

 

Изменено пользователем myuriy
Ссылка на комментарий
Поделиться на другие сайты

On 11/20/2017 at 11:53 PM, Nosych said:

GRUB_CMDLINE_LINUX_DEFAULT

 

On 11/20/2017 at 11:53 PM, Nosych said:

Сделал следующее:

sudo nano /etc/default/grub

нашёл там строку

GRUB_CMDLINE_LINUX_DEFAULT=""

и дописал в кавычках quiet splash

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

сохранился.

Затем:

sudo update-grub

sudo reboot

После ребута xorg.conf сгенерился с первого раза и всё заработало.

P.S. На форуме, где я нашёл решение своей проблемы, у чувака в кавычках уже стояло quiet splash и он менял его на quiet splash vmalloc=256M ,

но мне хватило только добавления в пустые кавычки quiet splash.

 

Бред сивой кобылы

Quote

The splash (which eventually ends up in your /boot/grub/grub.cfg ) causes the splash screen to be shown.

At the same time you want the boot process to be quiet, as otherwise all kinds of messages would disrupt that splash screen.

https://askubuntu.com/questions/716957/what-do-the-nomodeset-quiet-and-splash-kernel-parameters-mean

 

Ссылка на комментарий
Поделиться на другие сайты

@myuriy 

9 часов назад, myuriy сказал:

 

 

Бред сивой кобылы

 

 

Ни на что не претендую. В моём случае сработало, я поделился с народом.

Ссылка на комментарий
Поделиться на другие сайты

у кого не получается разгонять карту p106-6g - надо использовать не

GPUMemoryTransferRateOffset[3]

А

GPUMemoryTransferRateOffset[2]

Ссылка на комментарий
Поделиться на другие сайты

  • 3 недели спустя...

Решил поставить на ферму vnstsat, чтобы узнать сколько трафика жрёт ethminer.

После этого ethminer начал вылетать 2-3 раза за сутки. Удивился, подождал 3 дня - ситуация не изменилась.

Удалил vnstat со всеми зависимостями - ethminer работает стабильно без вылетов.

У всех так? Кто чем меряет трафик?

Ссылка на комментарий
Поделиться на другие сайты

On 1/5/2018 at 8:39 AM, Nosych said:

Решил поставить на ферму vnstsat, чтобы узнать сколько трафика жрёт ethminer.

После этого ethminer начал вылетать 2-3 раза за сутки. Удивился, подождал 3 дня - ситуация не изменилась.

Удалил vnstat со всеми зависимостями - ethminer работает стабильно без вылетов.

У всех так? Кто чем меряет трафик?

 

Попробуй iptraf-ng со включенными логами 

Ссылка на комментарий
Поделиться на другие сайты

Ломающие новости: nvidia-xconfig не нужен. Пропишите 16 карт, хорг возьмет те, которые есть. Как-то так:

Скрытый текст

# nvidia-xconfig не нужен // ur-quan // r12

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    Screen      3  "Screen3" RightOf "Screen2"
    Screen      4  "Screen4" RightOf "Screen3"
    Screen      5  "Screen5" RightOf "Screen4"
    Screen      6  "Screen6" RightOf "Screen5"
    Screen      7  "Screen7" RightOf "Screen6"
    Screen      8  "Screen8" RightOf "Screen7"
    Screen      9  "Screen9" RightOf "Screen8"
    Screen      10  "Screen10" RightOf "Screen9"
    Screen      11  "Screen11" RightOf "Screen10"
    Screen      12  "Screen12" RightOf "Screen11"
    Screen      13  "Screen13" RightOf "Screen12"
    Screen      14  "Screen14" RightOf "Screen13"
    Screen      15  "Screen15" RightOf "Screen14"

    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection
######################################################################
Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection
######################################################################
Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce"
    BusID          "PCI:0:0:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:2:0:0"
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:3:0:0"
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:4:0:0"
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:5:0:0"
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:6:0:0"
EndSection

Section "Device"
    Identifier     "Device7"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:7:0:0"
EndSection

Section "Device"
    Identifier     "Device8"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:8:0:0"
EndSection

Section "Device"
    Identifier     "Device9"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:9:0:0"
EndSection

Section "Device"
    Identifier     "Device10"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:10:0:0"
EndSection

Section "Device"
    Identifier     "Device11"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:11:0:0"
EndSection

Section "Device"
    Identifier     "Device12"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:12:0:0"
EndSection

Section "Device"
    Identifier     "Device13"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:13:0:0"
EndSection

Section "Device"
    Identifier     "Device14"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:14:0:0"
EndSection

Section "Device"
    Identifier     "Device15"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 3GB"
    BusID          "PCI:15:0:0"
EndSection
######################################################################
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
	Option "UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
	Option "UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
	Option "UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Device4"
	Option "UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen5"
    Device         "Device5"
	Option "UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen6"
    Device         "Device6"
	Option "UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen7"
    Device         "Device7"
	Option "UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen8"
    Device         "Device8"
	Option "UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen9"
    Device         "Device9"
	Option			"UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen10"
    Device         "Device10"
	Option			"UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen11"
    Device         "Device11"
	Option			"UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen12"
    Device         "Device12"
	Option			"UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen13"
    Device         "Device13"
	Option			"UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen14"
    Device         "Device14"
	Option			"UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen15"
    Device         "Device15"
	Option			"UseDisplayDevice" "none"
    DefaultDepth    8
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       8
        Modes      "640x480"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Disable"
EndSection

 

Может быть нюанс с номерами: видел где-то, что они могут быть 132, 133 и т.д. У меня такого на 4 разных моделях не было. lspci и dmesg в помощь.

 

Номера шины тут - десятеричные.

Изменено пользователем UR_Quan
Ссылка на комментарий
Поделиться на другие сайты

@UR_Quan, а зачем, если не секрет, все это руками делать коли это делает nvidia-xconfig и никаких нюансов? 

Изменено пользователем myuriy
Ссылка на комментарий
Поделиться на другие сайты

@myuriy , для многих ригов с разной начинкой. И вот этого всего бы не было. И время загрузки уменьшится.

Изменено пользователем UR_Quan
Ссылка на комментарий
Поделиться на другие сайты

В 10.01.2018 в 19:16, UR_Quan сказал:

@myuriy , для многих ригов с разной начинкой. И вот этого всего бы не было. И время загрузки уменьшится.

 

Может этого бы и не было, но сейчас всё работает. Недавно добавлял карточку, xorg.conf сгенерился без проблем.

Изменено пользователем Nosych
Ссылка на комментарий
Поделиться на другие сайты

On 1/10/2018 at 7:16 PM, UR_Quan said:

@myuriy , для многих ригов с разной начинкой. И вот этого всего бы не было. И время загрузки уменьшится.

За счет чего уменьшится? Если так хочется ускорения и нет ssd - sysv-rc-conf вам в руки да /etc/init.d/rc: CONCURRENCY=none -> CONCURRENCY=shell 

Ссылка на комментарий
Поделиться на другие сайты

@myuriy Я о своем. Ssd нет по дизайну: pxe и автостарт хконфига при загрузке из-за разношерстного парка.

 

И, насколько я вчитался, с приходом systemd загрузка паралельна по умолчанию.

Изменено пользователем UR_Quan
Ссылка на комментарий
Поделиться на другие сайты

  • 4 недели спустя...
В 07.12.2017 в 12:17, keenmax сказал:

Всем привет! Решил попробовать собрать ферму. Мать Asus B250 карта Asus 1060 6 GB

поставил ubuntu, разгону поддается. параметры  такие:

nvidia-settings -a '[gpu:0]/GPUMemoryTransferRateOffset[3]=1900';
nvidia-settings -a '[gpu:0]/GPUGraphicsClockOffset[3]=180';
скрипт по куллеру  немного переделал под себя. 

Столкнулся с проблемами:

1 нагрузка ethminer распределяется только на одно ядро и на 100%

top - 11:14:35 up  1:20,  2 users,  load average: 5,39, 2,94, 1,40
Tasks: 306 total,   2 running, 304 sleeping,   0 stopped,   0 zombie
%Cpu0  : 12,8 us,  3,7 sy,  0,0 ni, 83,6 id,  0,0 wa,  0,0 hi,  0,0 si,  0,0 st
%Cpu1  : 11,2 us,  4,0 sy,  0,0 ni, 83,8 id,  0,0 wa,  0,0 hi,  1,0 si,  0,0 st
%Cpu2  : 83,4 us, 16,6 sy,  0,0 ni,  0,0 id,  0,0 wa,  0,0 hi,  0,0 si,  0,0 st
%Cpu3  : 10,6 us,  5,0 sy,  0,0 ni, 83,7 id,  0,0 wa,  0,0 hi,  0,7 si,  0,0 st
КиБ Mem :  8095968 total,  6172648 free,  1332164 used,   591156 buff/cache
КиБ Swap:  2097148 total,  2097148 free,        0 used.  6491380 avail Mem
 

2 Максимум, что получилось выжать из карты - 20.5 Mh/s

 

в какую сторону копать?

 

@keenmax такая же проблема.

Плата PRIME B250-PRO

Карты 4 х ASUS DUAL-GTX1060-O6G

 

После сборки/установки рига карты без разгона в ethminer -U -M (бенчмарк) выдают  ETH 15Mh/s

Максимум получилось выгнать на 20.9, но это предел. 

После загрузки системы и включения PowerMizer карты переводятся в PrefLevel = 3

Как только начинает работать майнер карты перекидываются в PerfLevel = 2

 

Memory Clock ~4600

Core Clock ~2000

 

 

Может что то проглядел? 

 

 

 

Изменено пользователем Igor Voltaic
Ссылка на комментарий
Поделиться на другие сайты

В 09.11.2017 в 19:48, Torquemada сказал:

Ну да, в Питоне отступы крайне важны )))

Не за что! Пользуйтесь.

 

 Вывалился с такой ошибкой

 

File "./cryptowatchdog.py", line 83, in <module>
    gpu_raw = subprocess.run(["nvidia-smi", "--query-gpu=count", "--format=csv,noheader,nounits"], check=True, stdout=subprocess.PIPE, universal_newlines=True).stdout.split()
AttributeError: 'module' object has no attribute 'run'

Ссылка на комментарий
Поделиться на другие сайты

В 14.02.2018 в 22:09, Igor Voltaic сказал:

Вывалился с такой ошибкой

 

File "./cryptowatchdog.py", line 83, in <module>
    gpu_raw = subprocess.run(["nvidia-smi", "--query-gpu=count", "--format=csv,noheader,nounits"], check=True, stdout=subprocess.PIPE, universal_newlines=True).stdout.split()
AttributeError: 'module' object has no attribute 'run'

 

для скрипта нужен python 3.5 и новее. атрибут 'run' появился начиная с этой версии

Ссылка на комментарий
Поделиться на другие сайты

Коллеги, вопрос немного не по теме.....

Подскажите, а как программно получить доступ к процессу майнера, чтобы получать хешрейт? Ну как, например, это в ethOS и hiveOS сделано, когда хешрейт отображается на веб странице. Понятное дело, что они как-то получают доступ к STDOUT, например, процесса и парсят оттуда значения. Слышал я, что это делается с помощью Node.JS..... 

Кто-нибудь может натолкнуть на что-то, что поможет разобраться с этим?

Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу
  • Similar Topics

    • Настройка Асиков в "Соло Режим"

      Доброго времени суток товарищи. Такое дело, майнингом занимаюсь давно но никогда не пытался майнить соло. Стало интересно, и тут проблема выскочила. Хочу воткнуть в соло ROCK MINER t1.  Управляется он "BE200 Jet Stratum Miner V 5.47" через Block Erupter.  Настройки в bitcoin.conf server=1 rpcuser=123 rpcpassword=123 rpcallowip=* rpcport=3131 daemon=1 gen=0   Настройки в вебморде асика         192.168.0.101 - локальный ип сервака запущенного "сервер кошелек" 3131 порт открытыйв локалке и "из

      в ASIC/FPGA майнеры

    • Настройка USB майнера

      Народ привет! Прошу тему не удалять.   Нашёл наконец-то на просторах интернета такой мини Асик.  Поиск по фото показал, что это модель Erupter какая-то. Здесь есть древние темы, но не рискнул там писать. Скачал драйвер CP210x_Universal_Windows_Driver, Винда определила майнер. Нашел старую версию cgminer-3-1-1-zeus-windows.   Но вот где взять пул для добычи биткоина, чтобы его прописать в батнике? В старых темах пулы все мёртвые и давно на видюхах толь

      в ASIC/FPGA майнеры

    • Установка и настройка YiiMP пулов. База знаний

      Предисловие. Первоначально тема называлась так: "Домашний YiiMP пул + кошелек для соло. Нужен совет". Но в связи с тем, что информации по настройке yiimp пулов в сети катастрофически мало, в топике стали обсуждаться гораздо более широкие задачи. Надеемся, что, в конечном итоге, эта тема станет хорошей базой знаний.       Прошу помочь советом в настройке связки yiimp + кошелек.   Тема соло мне всегда была интересна, но так как метод getwok на сегодняшний день пра

      в Программы для майнинга

    • Замена вентилятора на EVGA GeForce GTX 1070 FTW

      Доброго времени суток.   Не подскажете, что и как можно сделать с картой EVGA GeForce GTX 1070 FTW? Отвалился один вентилятор. Но карта работает. Как заменить его, вентилятор, можно? И можно ли? И где его достать. Ни одной темы по этим вопросам не могу найти. Ни на форумах, ни в интернете.       Подойдут ли эти вентиляторы для замены: 1. Вентилятор - этот в итоге заказал... 2. Вентилятор - этот скорее всего не подойдёт...

      в Видеокарты

    • Настройка полного узла Lightning Network на Windows

      Не могу найти свежие статьи по запуску полной ноды  LN с помощью Bitcoin core + Eclair на Windows.  Все статьи,  что выдает поиск 2018 - 2019 года.  Есть кто это делал?  

      в Биткоин

×
×
  • Создать...