Перейти к содержанию

Ремонт: Bitmain Antminer s7, s9, l3+


Hlorofos
Сообщение добавил Hlorofos

Все полезные ссылки и FAQ можно найти в первом сообщении. Прежде чем задать вопрос, посмотрите там.

Рекомендуемые сообщения

Задавал такой же вопрос,никто не ответил.Мне помогла перепрошивка,правда из 14 терахешного он стал 13.5тх.Интересно можно вернуть 14тх.?

Ссылка на комментарий
Поделиться на другие сайты

@timzag @ыупгщшф 

Тема называется ремонт s7, s9. 

Прошивка, замена на новый БП, проверка проводов, интернет вы обязаны в первую очередь сделать и проверить.

Прежде чем писать на форумах. Почему мы об этом Вам должны напоминать.

Где исходные данные от вас. Хотя бы что сделали, что проверили. И как минимум, прикрепленный  лог работы Вашего девайса.

зы: Если вы так и не поняли о чем я, просьба не отвечать.

 

54 минуты назад, ыупгщшф сказал:

правда из 14 терахешного он стал 13.5тх.Интересно можно вернуть 14тх.?

на это пожалуйста отвечу. прошивка нужна с фиксированной частотой и выставить в настройках частоту 650мгц

Изменено пользователем profipc
Ссылка на комментарий
Поделиться на другие сайты

1 час назад, ыупгщшф сказал:

Задавал такой же вопрос,никто не ответил.Мне помогла перепрошивка,правда из 14 терахешного он стал 13.5тх.Интересно можно вернуть 14тх.?

Подскажите какую прошивку использовали?

Ссылка на комментарий
Поделиться на другие сайты

@Lee660 плюсую. А на первый чип от pic нет случаем. и последнего с датчиком темприче(англ)

Ссылка на комментарий
Поделиться на другие сайты

тоже поделюсь видео как паяют китайцы, не напрягаясь, без подогрева, но с трафаретами. Дает представление о процессе. и обратите на термоклей - он у них твердеет от нагрева. 

https://www.youtube.com/watch?v=yMc2VN7CIQ0

 

за трафареты они 100usd просят, за тестовый софт(может схемы) 500usd и за прибор видимо 1000usd

stensil.thumb.jpg.8e93ddfad6037f644069950e11901960.jpgtest.thumb.JPG.ad5d38e14dc31b61bbb0ce2cb5130476.JPG

 

Изменено пользователем profipc
Ссылка на комментарий
Поделиться на другие сайты

Китайский товарищ на видео смотрел напряжение питания асиков, похоже что дохлые начинают садить его. У кого есть исправные и битые сравните сопротивление по питанию чипа.

Ссылка на комментарий
Поделиться на другие сайты

7 минут назад, Lee660 сказал:

Китайский товарищ на видео смотрел напряжение питания асиков, похоже что дохлые начинают садить его. У кого есть исправные и битые сравните сопротивление по питанию чипа.

Это на d3. Там в короткое уходит и садит питалово во всей цепи - вычисляют подавая напругу на всю цепь asic . И дохлый жарит сильнее всех. Причем не надо так, как китаез в этом видео, извращаться. Данная ветка к сожалению не о D3.

Видео я дал для посмотреть процесс пайки, снятия радиаторов и т.д. в целом.

Изменено пользователем profipc
Ссылка на комментарий
Поделиться на другие сайты

2 часа назад, Lee660 сказал:

Вот в копилку знаний )

s1.jpg

 

Это схема для старых ревизий плат, где внешние LDO стоят только на последних 6 ASIC. На остальных ASIC 2.5 В заводится на встроенный LDO чипа.

В более свежих для каждого домена стоит свой LDO, а внутренние не задействованы. И на последних 6-ти стоят dc/dc 12/1.8. 

Так же на все сигнальные линии добавлены токоограничительные резисторы по 33 Ом. У последнего 63-го чип RI притянут к +1.8 В через 10 кОм. С него же берутся сигналы на светодиоды TF/RF.

Но принцип работы эта схема вполне отражает.

Изменено пользователем Splinter
Ссылка на комментарий
Поделиться на другие сайты

1 час назад, profipc сказал:

@Lee660 плюсую. А на первый чип от pic нет случаем. и последнего с датчиком темприче(англ)

А разве на первый чип от pic чтото идет? Они вроде между собой никак не связаны.

Ссылка на комментарий
Поделиться на другие сайты

18 минут назад, Splinter сказал:

А разве на первый чип от pic чтото идет? Они вроде между собой никак не связаны.

Не важно. Я то этого не знаю. Так формальность. Лучше что-то чем ничего.

26 минут назад, Splinter сказал:

Так же на все сигнальные линии добавлены токоограничительные резисторы по 33 Ом. Последний 63-й чип терминирован по RI на +1.8 В через 10 кОм. С него же берутся светодиоды TF/RF.

Блин не все же умные такие. Терминирован - вероятно притянут. (терминировать; создание нового термина, включение его в систему понятий какой-либо области науки, техники, искусства)

А светодиоды вероятно сигналы на светодиоды или?. Пожалуйста пишите проще.

По обвязке ri сразу видел, что схема отличается.

Изменено пользователем profipc
Ссылка на комментарий
Поделиться на другие сайты

38 минут назад, profipc сказал:

Не важно. Я то этого не знаю. Так формальность. Лучше что-то чем ничего.

Ясно. Просто подумал что вы чтото знаете по этому поводу. Я какой либо связи между PIC и ASIC'ами не обнаружил. Вопрос только куда 2 и 3 ноги PIC'а идут, никак не могу найти. В старых ревизиях это i2с для электронного сопротивления MCP4017, включенного в цепь FB преобразователя. В свежих ревизиях непонятно куда они идут (может и никуда).

38 минут назад, profipc сказал:

Пожалуйста пишите проще.

Замечание услышал, поправил.

Изменено пользователем Splinter
Ссылка на комментарий
Поделиться на другие сайты

@Splinter  подскажите. в исходниках single-board-test по сути это готовая прога для xilinx, собрал, закачал. и по ssh как то мона наблюдать. или нет?

Ссылка на комментарий
Поделиться на другие сайты

@profipc  так она уже есть на контрольке. Более того, если вы загляните в процессы в web-интерфейсе, то увидите процесс single-board-test. Именно эта программа и производит тестирование при старте системы (все что мы видим в логе, после окончания строчек с меткой времени (а это кернал лог самого линукса), это ее рук дело). Загвоздка лишь в том, что она работает не в том режиме - без записи результатов тестирования в память PIC. Вот как ее заставить работать в нужном режиме - загадка. Я думал, что есть какая-нибудь строчка в конфигах, но все перетыкал - ей по барабану. Видимо та версия, которая крутится в памяти контрольки скомпилирована с ключами жестко ограничивающими ее функциональность. Впринципе вы правы, ничто не мешает собрать ее как надо и закинуть на контрольку. Вывод результатов по ходу выполнения конечно будет, но вот управлять ей в процессе исполнения никак нельзя, она работает по своему алгоритму и ни какого общения с пользователем не предполагает.

Ссылка на комментарий
Поделиться на другие сайты

8 часов назад, profipc сказал:

Интересно какую температуру он выставил на фен? Даже smd компоненты слетают у него. Думаю не ниже 400° .. иначе с нижними радиаторами без подогрева у него они не запаялись бы .. 

Ссылка на комментарий
Поделиться на другие сайты

Добрый день, всех с праздником. Имею S9, покупался в Украине 26.12.2017, где почти сразу периодически отпадала одна из хеш-плат, редко но отпадала. Лечилось простым ребутом. Но отпадания все учащались и простое перезагрузить все менше спасало, итог, 24.03 плата на вебке пропала, красный индикатор на хеш-плате тоже не горит. Перетыкание шнуров питания, шлейфа с контрольной плати, сброс всех настроек, смена пула результата не дало. Работает жужа на двух платах, но пугает другое похожая проблема начала проявляться еще в одной хеш-плате. Подскажите на что обратить внимание...

 

kernel log.txt

Безымянный.png

Безымянный1.png

Ссылка на комментарий
Поделиться на другие сайты

@sergkrec85  Asic 0  третья плата - в ремонт. HW - это хардвэр ворнинг - предупреждения железа, аля реджекты, могут возникать в том числе от плохого пинга со стороны интернета, wifi маршрутизатора.

У меня одна плата в сутки до 17000 сыпала на Wifi, работает до сих пор(5 месяц) через lan провод 500 в сутки.

 

Ссылка на комментарий
Поделиться на другие сайты

3 минуты назад, sergkrec85 сказал:

В Киеве S9 хеш-платы не хотят брать, говорят не рентабельно (((

В Китай отправьте по гарантии. Туда можно вроде одной платой, а не весь Асик. В РФ в Иркутск, только весь требуют.

Ссылка на комментарий
Поделиться на другие сайты

Добрый день. Кто-нибудь сталкивался? Проблема такая, на одной из хэш плат S9 пропадают показания температуры. Показывает 15 градусов, вентилятор соответственно на 100. Перебором проверил что не шлейф, шил не помогло. Причем один раз после перезагрузки появилась нормальная тем-ра, видимо где-то непропай. Кто знает напишите где у них датчик температуры, был бы очень благодарен. Ведь не через чипы же снимается температура? 

На этом форуме так принято, сразу минусы ставить?? Нет бы что по делу написать. 

версия платы 4.31

Версия прошивки ноябрьская 17 г.

Скрытый текст

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000311] ps7-ttc #0 at df804000, irq=43
[    0.000626] Console: colour dummy device 80x30
[    0.000659] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040209] pid_max: default: 32768 minimum: 301
[    0.040433] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040453] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042616] CPU: Testing write buffer coherency: ok
[    0.042965] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043026] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043250] L310 cache controller enabled
[    0.043270] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121041] CPU1: Booted secondary processor
[    0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210364] Brought up 2 CPUs
[    0.210384] SMP: Total of 2 processors activated.
[    0.210393] CPU: All CPU(s) started in SVC mode.
[    0.211067] devtmpfs: initialized
[    0.213490] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214743] regulator-dummy: no parameters
[    0.223766] NET: Registered protocol family 16
[    0.226086] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228404] cpuidle: using governor ladder
[    0.228418] cpuidle: using governor menu
[    0.235999] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237546] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237561] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237682] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259659] bio: create slab <bio-0> at 0
[    0.261899] vgaarb: loaded
[    0.262609] SCSI subsystem initialized
[    0.263514] usbcore: registered new interface driver usbfs
[    0.263687] usbcore: registered new interface driver hub
[    0.263914] usbcore: registered new device driver usb
[    0.264440] media: Linux media interface: v0.10
[    0.264599] Linux video capture interface: v2.00
[    0.264856] pps_core: LinuxPPS API ver. 1 registered
[    0.264868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.265007] PTP clock support registered
[    0.265374] EDAC MC: Ver: 3.0.0
[    0.266419] Advanced Linux Sound Architecture Driver Initialized.
[    0.269416] DMA-API: preallocated 4096 debug entries
[    0.269431] DMA-API: debugging enabled by kernel config
[    0.269517] Switched to clocksource arm_global_timer
[    0.290062] NET: Registered protocol family 2
[    0.290739] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.290795] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.290881] TCP: Hash tables configured (established 4096 bind 4096)
[    0.290928] TCP: reno registered
[    0.290946] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.290983] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291240] NET: Registered protocol family 1
[    0.291610] RPC: Registered named UNIX socket transport module.
[    0.291624] RPC: Registered udp transport module.
[    0.291632] RPC: Registered tcp transport module.
[    0.291640] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.291653] PCI: CLS 0 bytes, default 64
[    0.292123] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294232] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296431] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.296631] msgmni has been set to 967
[    0.297448] io scheduler noop registered
[    0.297461] io scheduler deadline registered
[    0.297506] io scheduler cfq registered (default)
[    0.312200] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.312221] dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.436745] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.004510] console [ttyPS0] enabled
[    1.008821] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.016490] [drm] Initialized drm 1.1.0 20060810
[    1.033729] brd: module loaded
[    1.043193] loop: module loaded
[    1.052914] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.058662] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.066840] libphy: XEMACPS mii bus: probed
[    1.071478] ------------- phy_id = 0x3625e62
[    1.076237] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.085018] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.091724] ehci-pci: EHCI PCI platform driver
[    1.098938] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.105755] usbcore: registered new interface driver usb-storage
[    1.112643] mousedev: PS/2 mouse device common for all mice
[    1.118735] i2c /dev entries driver
[    1.125719] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.131258] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.137150] Xilinx Zynq CpuIdle Driver started
[    1.142063] sdhci: Secure Digital Host Controller Interface driver
[    1.148161] sdhci: Copyright(c) Pierre Ossman
[    1.152570] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.159315] mmc0: no vqmmc regulator found
[    1.163359] mmc0: no vmmc regulator found
[    1.199535] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.208225] usbcore: registered new interface driver usbhid
[    1.213737] usbhid: USB HID core driver
[    1.218468] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.224765] nand: Micron MT29F2G08ABAEAWP
[    1.228733] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.234669] Bad block table found at page 131008, version 0x01
[    1.240889] Bad block table found at page 130944, version 0x01
[    1.246942] 3 ofpart partitions found on MTD device pl353-nand
[    1.252722] Creating 3 MTD partitions on "pl353-nand":
[    1.257819] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.265884] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.273211] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.282205] TCP: cubic registered
[    1.285440] NET: Registered protocol family 17
[    1.290170] Registering SWP/SWPB emulation handler
[    1.296098] regulator-dummy: disabling
[    1.300485] UBI: attaching mtd1 to ubi0
[    1.693312] UBI: scanning is finished
[    1.705247] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.712329] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.719073] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.725776] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.732634] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.738603] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.745734] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1134783803
[    1.754765] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.763982] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.763988] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.767992] ALSA device list:
[    1.767995]   No soundcards found.
[    1.784509] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.934396] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.940339] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.949441] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.959340] UBIFS: reserved for root: 0 bytes (0 KiB)
[    1.964379] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[    1.982911] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.040545] devtmpfs: mounted
[    2.043659] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.153937] random: dd urandom read with 0 bits of entropy available
[    3.769529] 
[    3.769529] bcm54xx_config_init
[    4.379546] 
[    4.379546] bcm54xx_config_init
[    7.380400] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.386494] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.294217] In axi fpga driver!
[   20.297288] request_mem_region OK!
[   20.300712] AXI fpga dev virtual address is 0xdf9fc000
[   20.305785] *base_vir_addr = 0x8c510
[   20.321836] In fpga mem driver!
[   20.324908] request_mem_region OK!
[   20.328470] fpga mem virtual address is 0xe2000000
[   21.129557] 
[   21.129557] bcm54xx_config_init
[   21.769570] 
[   21.769570] bcm54xx_config_init
[   24.770393] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.776413] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  369.026118] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 80584c8162bb885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[12] has core num=3
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[0] has core num=1
Chain[7] ASIC[1] has core num=1
Chain[7] ASIC[2] has core num=1
Chain[7] ASIC[3] has core num=1
Chain[7] ASIC[4] has core num=1
Chain[7] ASIC[5] has core num=1
Chain[7] ASIC[6] has core num=1
Chain[7] ASIC[8] has core num=1
Chain[7] ASIC[9] has core num=1
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[12] has core num=1
Chain[7] ASIC[14] has core num=1
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[17] has core num=2
Chain[7] ASIC[19] has core num=3
Chain[7] ASIC[20] has core num=1
Chain[7] ASIC[21] has core num=1
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[23] has core num=2
Chain[7] ASIC[25] has core num=1
Chain[7] ASIC[26] has core num=1
Chain[7] ASIC[27] has core num=1
Chain[7] ASIC[28] has core num=1
Chain[7] ASIC[30] has core num=1
Chain[7] ASIC[31] has core num=1
Chain[7] ASIC[32] has core num=1
Chain[7] ASIC[33] has core num=1
Chain[7] ASIC[34] has core num=1
Chain[7] ASIC[35] has core num=1
Chain[7] ASIC[36] has core num=5
Chain[7] ASIC[37] has core num=1
Chain[7] ASIC[38] has core num=1
Chain[7] ASIC[39] has core num=1
Chain[7] ASIC[40] has core num=1
Chain[7] ASIC[41] has core num=1
Chain[7] ASIC[42] has core num=1
Chain[7] ASIC[43] has core num=1
Chain[7] ASIC[44] has core num=1
Chain[7] ASIC[45] has core num=2
Chain[7] ASIC[46] has core num=1
Chain[7] ASIC[47] has core num=1
Chain[7] ASIC[49] has core num=1
Chain[7] ASIC[50] has core num=1
Chain[7] ASIC[51] has core num=1
Chain[7] ASIC[52] has core num=1
Chain[7] ASIC[53] has core num=1
Chain[7] ASIC[54] has core num=1
Chain[7] ASIC[55] has core num=2
Chain[7] ASIC[56] has core num=1
Chain[7] ASIC[57] has core num=1
Chain[7] ASIC[58] has core num=1
Chain[7] ASIC[59] has core num=1
Chain[7] ASIC[60] has core num=1
Chain[7] ASIC[61] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found=17937 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=18481 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80584c8162bb885c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=6000
get fan[2] speed=6120
get fan[5] speed=6000
get fan[2] speed=6120
get fan[5] speed=6000
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[12] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[0] has core num=1
Chain[J8] ASIC[1] has core num=1
Chain[J8] ASIC[2] has core num=1
Chain[J8] ASIC[3] has core num=1
Chain[J8] ASIC[4] has core num=1
Chain[J8] ASIC[5] has core num=1
Chain[J8] ASIC[6] has core num=1
Chain[J8] ASIC[8] has core num=1
Chain[J8] ASIC[9] has core num=1
Chain[J8] ASIC[10] has core num=1
Chain[J8] ASIC[12] has core num=1
Chain[J8] ASIC[14] has core num=1
Chain[J8] ASIC[15] has core num=1
Chain[J8] ASIC[17] has core num=2
Chain[J8] ASIC[19] has core num=3
Chain[J8] ASIC[20] has core num=1
Chain[J8] ASIC[21] has core num=1
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[23] has core num=2
Chain[J8] ASIC[25] has core num=1
Chain[J8] ASIC[26] has core num=1
Chain[J8] ASIC[27] has core num=1
Chain[J8] ASIC[28] has core num=1
Chain[J8] ASIC[30] has core num=1
Chain[J8] ASIC[31] has core num=1
Chain[J8] ASIC[32] has core num=1
Chain[J8] ASIC[33] has core num=1
Chain[J8] ASIC[34] has core num=1
Chain[J8] ASIC[35] has core num=1
Chain[J8] ASIC[36] has core num=5
Chain[J8] ASIC[37] has core num=1
Chain[J8] ASIC[38] has core num=1
Chain[J8] ASIC[39] has core num=1
Chain[J8] ASIC[40] has core num=1
Chain[J8] ASIC[41] has core num=1
Chain[J8] ASIC[42] has core num=1
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[44] has core num=1
Chain[J8] ASIC[45] has core num=2
Chain[J8] ASIC[46] has core num=1
Chain[J8] ASIC[47] has core num=1
Chain[J8] ASIC[49] has core num=1
Chain[J8] ASIC[50] has core num=1
Chain[J8] ASIC[51] has core num=1
Chain[J8] ASIC[52] has core num=1
Chain[J8] ASIC[53] has core num=1
Chain[J8] ASIC[54] has core num=1
Chain[J8] ASIC[55] has core num=2
Chain[J8] ASIC[56] has core num=1
Chain[J8] ASIC[57] has core num=1
Chain[J8] ASIC[58] has core num=1
Chain[J8] ASIC[59] has core num=1
Chain[J8] ASIC[60] has core num=1
Chain[J8] ASIC[61] has core num=1
miner total rate=14083GH/s fixed rate=14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662 
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662 
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662 
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662 
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=643
Asic[ 0]:643 
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643 
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643 
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643 
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643 
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643 
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643 
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643 
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
Chain:7 max freq=643
Chain:7 min freq=643


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662 
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662 
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662 
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662 
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=643
Asic[ 0]:643 
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643 
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643 
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643 
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643 
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643 
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643 
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643 
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
Chain:7 max freq=643
Chain:7 min freq=643

max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:46 remote:49 offset:29 
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
Chain[J7] use default temp chip[244] 
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[6] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[6] chip[244] local:-64 remote:0 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=00
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:38 remote:42 offset:27 
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4752 voltage limit=870 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 870
retryFlag=1 will set the voltage limited on chain[5], change voltage=870
now set pic voltage=125 on chain[5]
single board rate=4754 voltage limit=870 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 870
retryFlag=1 will set the voltage limited on chain[6], change voltage=870
now set pic voltage=125 on chain[6]
single board rate=4576 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
retryFlag=1 will set the voltage limited on chain[7], change voltage=890
now set pic voltage=91 on chain[7]
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=870 [125]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912    asic[01]=912    asic[02]=912    asic[03]=912    asic[04]=912    asic[05]=912    asic[06]=912    asic[07]=912    
asic[08]=912    asic[09]=912    asic[10]=912    asic[11]=912    asic[12]=901    asic[13]=912    asic[14]=912    asic[15]=912    
asic[16]=912    asic[17]=912    asic[18]=912    asic[19]=912    asic[20]=912    asic[21]=912    asic[22]=912    asic[23]=912    
asic[24]=912    asic[25]=912    asic[26]=912    asic[27]=912    asic[28]=912    asic[29]=912    asic[30]=912    asic[31]=912    
asic[32]=912    asic[33]=912    asic[34]=912    asic[35]=912    asic[36]=912    asic[37]=912    asic[38]=912    asic[39]=912    
asic[40]=912    asic[41]=912    asic[42]=912    asic[43]=912    asic[44]=912    asic[45]=912    asic[46]=912    asic[47]=912    
asic[48]=912    asic[49]=912    asic[50]=912    asic[51]=912    asic[52]=912    asic[53]=912    asic[54]=912    asic[55]=912    
asic[56]=912    asic[57]=912    asic[58]=912    asic[59]=912    asic[60]=912    asic[61]=912    asic[62]=912    


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[12]=901
core[001]=4    core[003]=7    core[005]=6    core[007]=5    core[033]=7    

freq[00]=662    freq[01]=662    freq[02]=662    freq[03]=662    freq[04]=662    freq[05]=662    freq[06]=662    freq[07]=662    
freq[08]=662    freq[09]=662    freq[10]=662    freq[11]=662    freq[12]=662    freq[13]=662    freq[14]=662    freq[15]=662    
freq[16]=662    freq[17]=662    freq[18]=662    freq[19]=662    freq[20]=662    freq[21]=662    freq[22]=662    freq[23]=662    
freq[24]=662    freq[25]=662    freq[26]=662    freq[27]=662    freq[28]=662    freq[29]=662    freq[30]=662    freq[31]=662    
freq[32]=662    freq[33]=662    freq[34]=662    freq[35]=662    freq[36]=662    freq[37]=662    freq[38]=662    freq[39]=662    
freq[40]=662    freq[41]=662    freq[42]=662    freq[43]=662    freq[44]=662    freq[45]=662    freq[46]=662    freq[47]=662    
freq[48]=662    freq[49]=662    freq[50]=662    freq[51]=662    freq[52]=662    freq[53]=662    freq[54]=662    freq[55]=662    
freq[56]=662    freq[57]=662    freq[58]=662    freq[59]=662    freq[60]=662    freq[61]=662    freq[62]=662    

total valid nonce number:57445
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27129
last_nonce_num:33318
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912    asic[01]=912    asic[02]=912    asic[03]=912    asic[04]=912    asic[05]=912    asic[06]=912    asic[07]=912    
asic[08]=912    asic[09]=912    asic[10]=912    asic[11]=912    asic[12]=912    asic[13]=912    asic[14]=912    asic[15]=912    
asic[16]=912    asic[17]=912    asic[18]=912    asic[19]=912    asic[20]=912    asic[21]=912    asic[22]=912    asic[23]=912    
asic[24]=912    asic[25]=912    asic[26]=912    asic[27]=912    asic[28]=912    asic[29]=912    asic[30]=912    asic[31]=912    
asic[32]=912    asic[33]=912    asic[34]=912    asic[35]=912    asic[36]=912    asic[37]=912    asic[38]=912    asic[39]=912    
asic[40]=912    asic[41]=912    asic[42]=912    asic[43]=912    asic[44]=912    asic[45]=912    asic[46]=912    asic[47]=912    
asic[48]=912    asic[49]=912    asic[50]=912    asic[51]=912    asic[52]=912    asic[53]=912    asic[54]=912    asic[55]=912    
asic[56]=912    asic[57]=912    asic[58]=912    asic[59]=912    asic[60]=912    asic[61]=912    asic[62]=912    


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

freq[00]=662    freq[01]=662    freq[02]=662    freq[03]=662    freq[04]=662    freq[05]=662    freq[06]=662    freq[07]=662    
freq[08]=662    freq[09]=662    freq[10]=662    freq[11]=662    freq[12]=662    freq[13]=662    freq[14]=662    freq[15]=662    
freq[16]=662    freq[17]=662    freq[18]=662    freq[19]=662    freq[20]=662    freq[21]=662    freq[22]=662    freq[23]=662    
freq[24]=662    freq[25]=662    freq[26]=662    freq[27]=662    freq[28]=662    freq[29]=662    freq[30]=662    freq[31]=662    
freq[32]=662    freq[33]=662    freq[34]=662    freq[35]=662    freq[36]=662    freq[37]=662    freq[38]=662    freq[39]=662    
freq[40]=662    freq[41]=662    freq[42]=662    freq[43]=662    freq[44]=662    freq[45]=662    freq[46]=662    freq[47]=662    
freq[48]=662    freq[49]=662    freq[50]=662    freq[51]=662    freq[52]=662    freq[53]=662    freq[54]=662    freq[55]=662    
freq[56]=662    freq[57]=662    freq[58]=662    freq[59]=662    freq[60]=662    freq[61]=662    freq[62]=662    

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27141
last_nonce_num:41620
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=906    asic[01]=909    asic[02]=910    asic[03]=908    asic[04]=904    asic[05]=910    asic[06]=910    asic[07]=912    
asic[08]=911    asic[09]=906    asic[10]=904    asic[11]=912    asic[12]=911    asic[13]=910    asic[14]=908    asic[15]=910    
asic[16]=912    asic[17]=903    asic[18]=912    asic[19]=891    asic[20]=910    asic[21]=909    asic[22]=908    asic[23]=904    
asic[24]=912    asic[25]=911    asic[26]=908    asic[27]=909    asic[28]=910    asic[29]=912    asic[30]=907    asic[31]=907    
asic[32]=905    asic[33]=908    asic[34]=908    asic[35]=904    asic[36]=890    asic[37]=909    asic[38]=907    asic[39]=908    
asic[40]=910    asic[41]=906    asic[42]=911    asic[43]=909    asic[44]=910    asic[45]=904    asic[46]=909    asic[47]=910    
asic[48]=912    asic[49]=909    asic[50]=908    asic[51]=907    asic[52]=911    asic[53]=907    asic[54]=909    asic[55]=903    
asic[56]=910    asic[57]=906    asic[58]=909    asic[59]=904    asic[60]=904    asic[61]=907    asic[62]=912    


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=906
core[063]=2    

asic[01]=909
core[019]=5    

asic[02]=910
core[083]=6    

asic[03]=908
core[077]=4    

asic[04]=904
core[011]=0    

asic[05]=910
core[071]=6    

asic[06]=910
core[049]=6    

asic[08]=911
core[054]=7    

asic[09]=906
core[041]=2    

asic[10]=904
core[089]=0    

asic[12]=911
core[015]=7    

asic[13]=910
core[058]=6    

asic[14]=908
core[064]=4    

asic[15]=910
core[079]=6    

asic[17]=903
core[056]=4    core[112]=3    

asic[19]=891
core[004]=1    core[070]=1    core[080]=1    

asic[20]=910
core[060]=6    

asic[21]=909
core[042]=5    

asic[22]=908
core[027]=4    

asic[23]=904
core[018]=3    core[110]=5    

asic[25]=911
core[059]=7    

asic[26]=908
core[112]=4    

asic[27]=909
core[099]=5    

asic[28]=910
core[058]=6    

asic[30]=907
core[074]=3    

asic[31]=907
core[071]=3    

asic[32]=905
core[009]=1    

asic[33]=908
core[103]=4    

asic[34]=908
core[078]=4    

asic[35]=904
core[017]=0    

asic[36]=890
core[023]=3    core[024]=3    core[025]=0    core[077]=7    core[078]=6    core[079]=7    

asic[37]=909
core[052]=5    

asic[38]=907
core[088]=3    

asic[39]=908
core[044]=4    

asic[40]=910
core[011]=6    

asic[41]=906
core[096]=2    

asic[42]=911
core[006]=7    

asic[43]=909
core[030]=5    

asic[44]=910
core[014]=6    

asic[45]=904
core[067]=4    core[084]=4    

asic[46]=909
core[069]=5    

asic[47]=910
core[086]=6    

asic[49]=909
core[054]=5    

asic[50]=908
core[083]=4    

asic[51]=907
core[109]=3    

asic[52]=911
core[077]=7    

asic[53]=907
core[103]=3    

asic[54]=909
core[088]=5    

asic[55]=903
core[020]=5    core[032]=2    

asic[56]=910
core[053]=6    

asic[57]=906
core[025]=2    

asic[58]=909
core[086]=5    

asic[59]=904
core[062]=0    

asic[60]=904
core[012]=0    

asic[61]=907
core[034]=3    

freq[00]=643    freq[01]=643    freq[02]=643    freq[03]=643    freq[04]=643    freq[05]=643    freq[06]=643    freq[07]=643    
freq[08]=643    freq[09]=643    freq[10]=643    freq[11]=643    freq[12]=643    freq[13]=643    freq[14]=643    freq[15]=643    
freq[16]=643    freq[17]=643    freq[18]=643    freq[19]=643    freq[20]=643    freq[21]=643    freq[22]=643    freq[23]=643    
freq[24]=643    freq[25]=643    freq[26]=643    freq[27]=643    freq[28]=643    freq[29]=643    freq[30]=643    freq[31]=643    
freq[32]=643    freq[33]=643    freq[34]=643    freq[35]=643    freq[36]=643    freq[37]=643    freq[38]=643    freq[39]=643    
freq[40]=643    freq[41]=643    freq[42]=643    freq[43]=643    freq[44]=643    freq[45]=643    freq[46]=643    freq[47]=643    
freq[48]=643    freq[49]=643    freq[50]=643    freq[51]=643    freq[52]=643    freq[53]=643    freq[54]=643    freq[55]=643    
freq[56]=643    freq[57]=643    freq[58]=643    freq[59]=643    freq[60]=643    freq[61]=643    freq[62]=643    

total valid nonce number:57192
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26254
last_nonce_num:41604
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912    asic[01]=912    asic[02]=912    asic[03]=912    asic[04]=912    asic[05]=912    asic[06]=912    asic[07]=912    
asic[08]=912    asic[09]=912    asic[10]=912    asic[11]=912    asic[12]=912    asic[13]=912    asic[14]=912    asic[15]=912    
asic[16]=912    asic[17]=912    asic[18]=912    asic[19]=912    asic[20]=912    asic[21]=912    asic[22]=912    asic[23]=912    
asic[24]=912    asic[25]=912    asic[26]=912    asic[27]=912    asic[28]=912    asic[29]=912    asic[30]=912    asic[31]=912    
asic[32]=912    asic[33]=912    asic[34]=912    asic[35]=912    asic[36]=912    asic[37]=912    asic[38]=912    asic[39]=912    
asic[40]=912    asic[41]=912    asic[42]=912    asic[43]=912    asic[44]=912    asic[45]=912    asic[46]=912    asic[47]=912    
asic[48]=912    asic[49]=912    asic[50]=912    asic[51]=912    asic[52]=912    asic[53]=912    asic[54]=912    asic[55]=912    
asic[56]=912    asic[57]=912    asic[58]=912    asic[59]=912    asic[60]=912    asic[61]=912    asic[62]=912    


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

freq[00]=662    freq[01]=662    freq[02]=662    freq[03]=662    freq[04]=662    freq[05]=662    freq[06]=662    freq[07]=662    
freq[08]=662    freq[09]=662    freq[10]=662    freq[11]=662    freq[12]=662    freq[13]=662    freq[14]=662    freq[15]=662    
freq[16]=662    freq[17]=662    freq[18]=662    freq[19]=662    freq[20]=662    freq[21]=662    freq[22]=662    freq[23]=662    
freq[24]=662    freq[25]=662    freq[26]=662    freq[27]=662    freq[28]=662    freq[29]=662    freq[30]=662    freq[31]=662    
freq[32]=662    freq[33]=662    freq[34]=662    freq[35]=662    freq[36]=662    freq[37]=662    freq[38]=662    freq[39]=662    
freq[40]=662    freq[41]=662    freq[42]=662    freq[43]=662    freq[44]=662    freq[45]=662    freq[46]=662    freq[47]=662    
freq[48]=662    freq[49]=662    freq[50]=662    freq[51]=662    freq[52]=662    freq[53]=662    freq[54]=662    freq[55]=662    
freq[56]=662    freq[57]=662    freq[58]=662    freq[59]=662    freq[60]=662    freq[61]=662    freq[62]=662    

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27133
last_nonce_num:35889
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912    asic[01]=912    asic[02]=912    asic[03]=912    asic[04]=912    asic[05]=912    asic[06]=912    asic[07]=912    
asic[08]=912    asic[09]=912    asic[10]=912    asic[11]=912    asic[12]=912    asic[13]=912    asic[14]=912    asic[15]=912    
asic[16]=912    asic[17]=912    asic[18]=912    asic[19]=912    asic[20]=912    asic[21]=912    asic[22]=912    asic[23]=912    
asic[24]=912    asic[25]=912    asic[26]=912    asic[27]=912    asic[28]=912    asic[29]=912    asic[30]=912    asic[31]=912    
asic[32]=912    asic[33]=912    asic[34]=912    asic[35]=912    asic[36]=912    asic[37]=912    asic[38]=912    asic[39]=912    
asic[40]=912    asic[41]=912    asic[42]=912    asic[43]=912    asic[44]=912    asic[45]=912    asic[46]=912    asic[47]=912    
asic[48]=912    asic[49]=912    asic[50]=912    asic[51]=912    asic[52]=912    asic[53]=912    asic[54]=912    asic[55]=912    
asic[56]=912    asic[57]=912    asic[58]=912    asic[59]=912    asic[60]=912    asic[61]=912    asic[62]=912    


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

freq[00]=662    freq[01]=662    freq[02]=662    freq[03]=662    freq[04]=662    freq[05]=662    freq[06]=662    freq[07]=662    
freq[08]=662    freq[09]=662    freq[10]=662    freq[11]=662    freq[12]=662    freq[13]=662    freq[14]=662    freq[15]=662    
freq[16]=662    freq[17]=662    freq[18]=662    freq[19]=662    freq[20]=662    freq[21]=662    freq[22]=662    freq[23]=662    
freq[24]=662    freq[25]=662    freq[26]=662    freq[27]=662    freq[28]=662    freq[29]=662    freq[30]=662    freq[31]=662    
freq[32]=662    freq[33]=662    freq[34]=662    freq[35]=662    freq[36]=662    freq[37]=662    freq[38]=662    freq[39]=662    
freq[40]=662    freq[41]=662    freq[42]=662    freq[43]=662    freq[44]=662    freq[45]=662    freq[46]=662    freq[47]=662    
freq[48]=662    freq[49]=662    freq[50]=662    freq[51]=662    freq[52]=662    freq[53]=662    freq[54]=662    freq[55]=662    
freq[56]=662    freq[57]=662    freq[58]=662    freq[59]=662    freq[60]=662    freq[61]=662    freq[62]=662    

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27134
last_nonce_num:44188
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=906    asic[01]=909    asic[02]=910    asic[03]=908    asic[04]=904    asic[05]=910    asic[06]=910    asic[07]=912    
asic[08]=911    asic[09]=906    asic[10]=904    asic[11]=912    asic[12]=911    asic[13]=912    asic[14]=908    asic[15]=910    
asic[16]=912    asic[17]=903    asic[18]=912    asic[19]=891    asic[20]=910    asic[21]=909    asic[22]=908    asic[23]=904    
asic[24]=912    asic[25]=911    asic[26]=908    asic[27]=909    asic[28]=910    asic[29]=912    asic[30]=907    asic[31]=907    
asic[32]=905    asic[33]=908    asic[34]=908    asic[35]=904    asic[36]=891    asic[37]=909    asic[38]=907    asic[39]=908    
asic[40]=910    asic[41]=906    asic[42]=912    asic[43]=909    asic[44]=910    asic[45]=904    asic[46]=909    asic[47]=910    
asic[48]=912    asic[49]=909    asic[50]=908    asic[51]=907    asic[52]=911    asic[53]=907    asic[54]=909    asic[55]=903    
asic[56]=910    asic[57]=906    asic[58]=909    asic[59]=904    asic[60]=904    asic[61]=907    asic[62]=912    


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=906
core[063]=2    

asic[01]=909
core[019]=5    

asic[02]=910
core[083]=6    

asic[03]=908
core[077]=4    

asic[04]=904
core[011]=0    

asic[05]=910
core[071]=6    

asic[06]=910
core[049]=6    

asic[08]=911
core[054]=7    

asic[09]=906
core[041]=2    

asic[10]=904
core[089]=0    

asic[12]=911
core[015]=7    

asic[14]=908
core[064]=4    

asic[15]=910
core[079]=6    

asic[17]=903
core[056]=4    core[112]=3    

asic[19]=891
core[004]=1    core[070]=1    core[080]=1    

asic[20]=910
core[060]=6    

asic[21]=909
core[042]=5    

asic[22]=908
core[027]=4    

asic[23]=904
core[018]=3    core[110]=5    

asic[25]=911
core[059]=7    

asic[26]=908
core[112]=4    

asic[27]=909
core[099]=5    

asic[28]=910
core[058]=6    

asic[30]=907
core[074]=3    

asic[31]=907
core[071]=3    

asic[32]=905
core[009]=1    

asic[33]=908
core[103]=4    

asic[34]=908
core[078]=4    

asic[35]=904
core[017]=0    

asic[36]=891
core[023]=3    core[024]=3    core[025]=0    core[078]=6    core[079]=7    

asic[37]=909
core[052]=5    

asic[38]=907
core[088]=3    

asic[39]=908
core[044]=4    

asic[40]=910
core[011]=6    

asic[41]=906
core[096]=2    

asic[43]=909
core[030]=5    

asic[44]=910
core[014]=6    

asic[45]=904
core[067]=4    core[084]=4    

asic[46]=909
core[069]=5    

asic[47]=910
core[086]=6    

asic[49]=909
core[054]=5    

asic[50]=908
core[083]=4    

asic[51]=907
core[109]=3    

asic[52]=911
core[077]=7    

asic[53]=907
core[103]=3    

asic[54]=909
core[088]=5    

asic[55]=903
core[020]=5    core[032]=2    

asic[56]=910
core[053]=6    

asic[57]=906
core[025]=2    

asic[58]=909
core[086]=5    

asic[59]=904
core[062]=0    

asic[60]=904
core[012]=0    

asic[61]=907
core[034]=3    

freq[00]=643    freq[01]=643    freq[02]=643    freq[03]=643    freq[04]=643    freq[05]=643    freq[06]=643    freq[07]=643    
freq[08]=643    freq[09]=643    freq[10]=643    freq[11]=643    freq[12]=643    freq[13]=643    freq[14]=643    freq[15]=643    
freq[16]=643    freq[17]=643    freq[18]=643    freq[19]=643    freq[20]=643    freq[21]=643    freq[22]=643    freq[23]=643    
freq[24]=643    freq[25]=643    freq[26]=643    freq[27]=643    freq[28]=643    freq[29]=643    freq[30]=643    freq[31]=643    
freq[32]=643    freq[33]=643    freq[34]=643    freq[35]=643    freq[36]=643    freq[37]=643    freq[38]=643    freq[39]=643    
freq[40]=643    freq[41]=643    freq[42]=643    freq[43]=643    freq[44]=643    freq[45]=643    freq[46]=643    freq[47]=643    
freq[48]=643    freq[49]=643    freq[50]=643    freq[51]=643    freq[52]=643    freq[53]=643    freq[54]=643    freq[55]=643    
freq[56]=643    freq[57]=643    freq[58]=643    freq[59]=643    freq[60]=643    freq[61]=643    freq[62]=643    

total valid nonce number:57196
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26260
last_nonce_num:52491
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=684 total_tv_end_sys=685
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=70.7320 Asic[02]=77.8630 Asic[03]=74.8260 Asic[04]=76.6550 Asic[05]=73.9030 Asic[06]=76.9230 Asic[07]=74.0880 Asic[08]=74.0540 
Asic[09]=79.0870 Asic[10]=72.8970 Asic[11]=79.1710 Asic[12]=70.0110 Asic[13]=74.6750 Asic[14]=69.4570 Asic[15]=72.2930 Asic[16]=71.9400 
Asic[17]=76.2020 Asic[18]=74.1880 Asic[19]=72.8290 Asic[20]=77.0070 Asic[21]=76.7890 Asic[22]=75.2290 Asic[23]=71.9230 Asic[24]=70.0610 
Asic[25]=75.3630 Asic[26]=76.6880 Asic[27]=68.2660 Asic[28]=80.4130 Asic[29]=75.7820 Asic[30]=75.1450 Asic[31]=76.1010 Asic[32]=75.4800 
Asic[33]=76.8220 Asic[34]=78.4160 Asic[35]=68.6350 Asic[36]=77.0400 Asic[37]=76.6550 Asic[38]=77.9970 Asic[39]=74.9940 Asic[40]=71.3030 
Asic[41]=74.3230 Asic[42]=68.2660 Asic[43]=78.3160 Asic[44]=68.6690 Asic[45]=78.6180 Asic[46]=72.0070 Asic[47]=71.8560 Asic[48]=75.4800 
Asic[49]=72.5950 Asic[50]=80.0940 Asic[51]=77.8460 Asic[52]=73.1820 Asic[53]=80.0600 Asic[54]=79.0030 Asic[55]=78.7180 Asic[56]=76.3690 
Asic[57]=76.0340 Asic[58]=80.3120 Asic[59]=79.8090 Asic[60]=73.6680 Asic[61]=84.7240 Asic[62]=71.7390 Asic[63]=74.3060 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=73.0140 Asic[02]=75.0780 Asic[03]=72.9130 Asic[04]=76.6210 Asic[05]=66.7390 Asic[06]=78.4330 Asic[07]=75.7990 Asic[08]=69.7420 
Asic[09]=75.3630 Asic[10]=79.9090 Asic[11]=76.1180 Asic[12]=74.5740 Asic[13]=69.5410 Asic[14]=69.1720 Asic[15]=79.3730 Asic[16]=76.2860 
Asic[17]=68.8200 Asic[18]=73.4670 Asic[19]=73.2150 Asic[20]=78.3660 Asic[21]=74.2220 Asic[22]=72.2250 Asic[23]=75.7320 Asic[24]=78.0810 
Asic[25]=80.2620 Asic[26]=72.5950 Asic[27]=82.4930 Asic[28]=72.0240 Asic[29]=74.7420 Asic[30]=77.6780 Asic[31]=80.1610 Asic[32]=76.1850 
Asic[33]=73.4840 Asic[34]=74.0710 Asic[35]=74.7420 Asic[36]=73.0810 Asic[37]=76.6380 Asic[38]=74.2050 Asic[39]=74.5240 Asic[40]=78.4670 
Asic[41]=74.5410 Asic[42]=75.6650 Asic[43]=75.7820 Asic[44]=78.9870 Asic[45]=77.7790 Asic[46]=73.9870 Asic[47]=70.4970 Asic[48]=74.1550 
Asic[49]=69.8600 Asic[50]=74.4740 Asic[51]=78.9030 Asic[52]=72.7460 Asic[53]=72.8630 Asic[54]=72.5270 Asic[55]=74.6080 Asic[56]=69.8930 
Asic[57]=74.1880 Asic[58]=77.5610 Asic[59]=77.4600 Asic[60]=77.7620 Asic[61]=74.6920 Asic[62]=74.6080 Asic[63]=74.4740 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=73.4500 Asic[02]=72.5270 Asic[03]=71.7720 Asic[04]=76.1680 Asic[05]=75.2620 Asic[06]=71.9230 Asic[07]=74.1720 Asic[08]=74.0710 
Asic[09]=71.6720 Asic[10]=67.9140 Asic[11]=73.5170 Asic[12]=67.1250 Asic[13]=70.3630 Asic[14]=75.3960 Asic[15]=71.1180 Asic[16]=75.4800 
Asic[17]=68.6350 Asic[18]=77.1910 Asic[19]=74.0210 Asic[20]=69.9270 Asic[21]=71.0340 Asic[22]=71.7220 Asic[23]=70.0110 Asic[24]=72.8130 
Asic[25]=74.9940 Asic[26]=67.0080 Asic[27]=68.8530 Asic[28]=76.6380 Asic[29]=71.9910 Asic[30]=74.9600 Asic[31]=75.2290 Asic[32]=71.6720 
Asic[33]=76.1680 Asic[34]=72.4600 Asic[35]=73.9530 Asic[36]=71.9230 Asic[37]=73.5680 Asic[38]=71.6050 Asic[39]=77.2080 Asic[40]=64.8100 
Asic[41]=76.8890 Asic[42]=75.8830 Asic[43]=77.9130 Asic[44]=76.3530 Asic[45]=76.7050 Asic[46]=69.4240 Asic[47]=70.4470 Asic[48]=76.2350 
Asic[49]=75.1950 Asic[50]=69.0550 Asic[51]=71.5380 Asic[52]=69.0710 Asic[53]=69.0550 Asic[54]=76.7220 Asic[55]=72.5270 Asic[56]=71.9070 
Asic[57]=72.1750 Asic[58]=64.7930 Asic[59]=69.1380 Asic[60]=67.8800 Asic[61]=72.5110 Asic[62]=74.1380 Asic[63]=72.8970 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
Chain[5] Chip[62] local Temp=66
Chain[5] Chip[62] middle Temp=77
Special fix Chain[5] Chip[62] middle Temp = 81
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[6] Chip[62] local Temp=0
read failed on Chain[6] Chip[62] middle Temp old value:15
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
Chain[7] Chip[62] local Temp=61
Chain[7] Chip[62] middle Temp=72
Special fix Chain[7] Chip[62] middle Temp = 76
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0


 

Изменено пользователем vladiksam
добавил лог
Ссылка на комментарий
Поделиться на другие сайты

Добрый вечер , сегодня перестал подключаться с9... менял пулы толку нет.. перепрошивка не помогла ...вот лог 

Скрытый текст

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000309] ps7-ttc #0 at df804000, irq=43
[    0.000621] Console: colour dummy device 80x30
[    0.000653] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040210] pid_max: default: 32768 minimum: 301
[    0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040453] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042644] CPU: Testing write buffer coherency: ok
[    0.042992] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043052] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043272] L310 cache controller enabled
[    0.043291] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121039] CPU1: Booted secondary processor
[    0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210379] SMP: Total of 2 processors activated.
[    0.210388] CPU: All CPU(s) started in SVC mode.
[    0.211055] devtmpfs: initialized
[    0.213486] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214734] regulator-dummy: no parameters
[    0.223694] NET: Registered protocol family 16
[    0.225970] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228291] cpuidle: using governor ladder
[    0.228304] cpuidle: using governor menu
[    0.235844] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237383] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237397] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237518] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259632] bio: create slab <bio-0> at 0
[    0.261396] vgaarb: loaded
[    0.262120] SCSI subsystem initialized
[    0.263006] usbcore: registered new interface driver usbfs
[    0.263180] usbcore: registered new interface driver hub
[    0.263421] usbcore: registered new device driver usb
[    0.263950] media: Linux media interface: v0.10
[    0.264107] Linux video capture interface: v2.00
[    0.264350] pps_core: LinuxPPS API ver. 1 registered
[    0.264361] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.264488] PTP clock support registered
[    0.264865] EDAC MC: Ver: 3.0.0
[    0.265935] Advanced Linux Sound Architecture Driver Initialized.
[    0.268958] DMA-API: preallocated 4096 debug entries
[    0.268973] DMA-API: debugging enabled by kernel config
[    0.269063] Switched to clocksource arm_global_timer
[    0.290519] NET: Registered protocol family 2
[    0.291190] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.291247] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.291333] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291387] TCP: reno registered
[    0.291406] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.291439] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291683] NET: Registered protocol family 1
[    0.292053] RPC: Registered named UNIX socket transport module.
[    0.292066] RPC: Registered udp transport module.
[    0.292075] RPC: Registered tcp transport module.
[    0.292083] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.292097] PCI: CLS 0 bytes, default 64
[    0.292552] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294621] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296782] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.296976] msgmni has been set to 967
[    0.297778] io scheduler noop registered
[    0.297792] io scheduler deadline registered
[    0.297850] io scheduler cfq registered (default)
[    0.307366] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.307386] dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.434235] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.002438] console [ttyPS0] enabled
[    1.006759] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.014445] [drm] Initialized drm 1.1.0 20060810
[    1.031681] brd: module loaded
[    1.041126] loop: module loaded
[    1.051043] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.056796] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.064674] libphy: XEMACPS mii bus: probed
[    1.069045] ------------- phy_id = 0x3625e62
[    1.073964] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.082588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.089329] ehci-pci: EHCI PCI platform driver
[    1.096546] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.103422] usbcore: registered new interface driver usb-storage
[    1.110312] mousedev: PS/2 mouse device common for all mice
[    1.116430] i2c /dev entries driver
[    1.123402] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.128890] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.134832] Xilinx Zynq CpuIdle Driver started
[    1.139819] sdhci: Secure Digital Host Controller Interface driver
[    1.145913] sdhci: Copyright(c) Pierre Ossman
[    1.150275] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.157063] mmc0: no vqmmc regulator found
[    1.161109] mmc0: no vmmc regulator found
[    1.199087] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.207770] usbcore: registered new interface driver usbhid
[    1.213281] usbhid: USB HID core driver
[    1.218009] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.224310] nand: Micron MT29F2G08ABAEAWP
[    1.228272] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.234213] Bad block table found at page 131008, version 0x01
[    1.240442] Bad block table found at page 130944, version 0x01
[    1.246495] 3 ofpart partitions found on MTD device pl353-nand
[    1.252283] Creating 3 MTD partitions on "pl353-nand":
[    1.257371] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.265440] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.272774] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281777] TCP: cubic registered
[    1.285014] NET: Registered protocol family 17
[    1.289735] Registering SWP/SWPB emulation handler
[    1.295676] regulator-dummy: disabling
[    1.300069] UBI: attaching mtd1 to ubi0
[    1.828570] UBI: scanning is finished
[    1.840241] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.847295] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.854092] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.860768] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.867605] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.873616] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.880726] UBI: max/mean erase counter: 75/32, WL threshold: 4096, image sequence number: 1411313766
[    1.889929] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.899147] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.899152] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.903193] ALSA device list:
[    1.903197]   No soundcards found.
[    1.919631] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.982698] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.988627] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.997771] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.007646] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.012686] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E7000DF8-CAC1-4941-A278-188D954B7F71, small LPT model
[    2.024247] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.031682] devtmpfs: mounted
[    2.034793] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.883074] random: dd urandom read with 0 bits of entropy available
[    3.289106] 
[    3.289106] bcm54xx_config_init
[    3.899096] 
[    3.899096] bcm54xx_config_init
[    6.899941] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.906038] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   21.426710] In axi fpga driver!
[   21.429812] request_mem_region OK!
[   21.433176] AXI fpga dev virtual address is 0xdf9fc000
[   21.438281] *base_vir_addr = 0x8c510
[   21.453593] In fpga mem driver!
[   21.456749] request_mem_region OK!
[   21.460358] fpga mem virtual address is 0xe2000000
[   22.268472] 
[   22.268472] bcm54xx_config_init
[   22.898431] 
[   22.898431] bcm54xx_config_init
[   25.898972] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   25.904992] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8130852e123b8854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
Find /tmp/searcherror: U6:1  The last log is below:
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8130852e123b8854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x00
chain[5] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
After restore: chain[5] PIC fw version=0x00
 

само окно 

 

с9.jpg

Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу
  • Similar Topics

    • Antminer L3, L3+

      Доброй ночи! пожалуйста помогите кто знает с antminer l3+  работает 1.5 недели, все было хорошо.  В один момент вижу, что он выключен пришел его перезагрузил и началось   Вообщем выдает ошибку socket connect failed. connection refused то иногда включается и показывает на второй плате 21 чип место 71  много раз перезагружал, перекинул с другого асика блок питания он все равно так   не майнит уходит в ошибку   что делать подскажите пожалуйста, асику всего полторы недели скрины приложил

      в ASIC/FPGA майнеры

    • блок питания Antminer T21

      Нужен ваш совет . Есть ли какой то способ подключить Bitcoin Miner T21 190T Power supply AC Input voltage  380~415 3610W к одной фазной сети 200 - 230 вольт !? Векторный преобразователь частоты 220 > 380В сможет !? Например - https://spc.com.ua/ru/products/nietz-splc-nz2200-15gs2-vector-frequency-inverter-15kw-ip20-1phase-220v-to-3phase-380v

      в Блоки питания, ИБП, силовая часть

    • Antminer S17, S17pro, S17+, S17e, T17, T17e, T17+

      Официальный сайт | Manual | Прошивка (официальный сайт) | Прошивка (bits.media)   В теме действуют все Правила форума! Перед тем как задать вопрос, посмотрите НОВИЧКИ Bits.Media, все сюда,  F.A.Q по майнингу. Уважайте своё и чужое время. Для обсуждения и поиска программ/драйверов пользуйтесь разделом Файлы. Сообщения, не относящиеся к теме обсуждения (оффтоп), удаляются без предупреждения.   Технические характеристики:   Статьи на Bits.me

      в ASIC/FPGA майнеры

    • Antminer S19,-pro, S19j,-pro, S19a, S19i, S19 Hyd, S19pro Hyd, S19pro+ Hyd, T19 Hyd

      Официальный сайт | Manual | Прошивка (официальный сайт) | Прошивка (bits.media)   В теме действуют все Правила форума! Перед тем как задать вопрос, посмотрите НОВИЧКИ Bits.Media, все сюда,  F.A.Q по майнингу. Уважайте своё и чужое время. Для обсуждения и поиска программ/драйверов пользуйтесь разделом Файлы. Сообщения, не относящиеся к теме обсуждения (оффтоп), удаляются без предупреждения.   Технические характеристики:   Статьи на Bits.me

      в ASIC/FPGA майнеры

    • Antminer D3. Плата управления.

      Привет всем. во время прошивки отключилось питание. по всей вероятности, покривился бутлоадер. ибо, загрузится с MicroSD карты теперь невозможно. плата не переводится в аварийный режим загрузки с флешки замыканием по диагонали контактов 43 на разъёме Р8 и 3, на разъёме Р9 (или 29,30 NAND) возможно ли восстановить загрузчик через JTEG или как-то ещё? в правом верхнем углу платы, правее NAND, место под разъём MicroUSB, можно ли залить бутлоадер через него? спасибо.  

      в ASIC/FPGA майнеры

×
×
  • Создать...