Ремонт: Bitmain Antminer s7, s9, l3+

[svart]

В 08.09.2022 в 01:20, svm55 сказал:

Непонятно. Какое питание? Они ж все последовательно. Не может быть питание частями. Может имеется ввиду, питание по ЛДО? Последние пять доменов от  непосредственно 12 вольт, а остальные от других доменов, как уже не раз писали тут. Тогда у вас пропадает, выходит основное питание, с ДС/ДС преобразователя? Он выключается? А отключение стабильно? Появляется ли напряжение снова и когда? И т.д. Столько вопросов.... Правильный вопрос - верный ответ (частенько). Я бы ещё проверил, пропадает ли в этот момент 3,3В с контрольки. Прямо на ПИКе.

 

здесь все не понятно. наверно контролька или шлейф виноват, потому что в аппарате работает, потом error pic, restor и 0 asic. и так с разными платами. 

[Berks]

Спойлер

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery  
CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25672K  
reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12632K (cceab000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241]  
(mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 22/9, WL threshold: 4096, image sequence number: 1827870470
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 62D65561-DF66-4383-95E4-583F89559B9A, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3601/723, WL threshold: 4096, image sequence number: 3547329458
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B852FC58-59EF-482E-A0E3-C3ADA716F2F0, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab00d
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
 [2022-09-19 12:19:40.431] httpListenThread start ret=0
 [2022-09-19 12:20:10.431] start listen on 6060 ...
 [2022-09-19 12:20:43.388] Probing for an alive pool
 [2022-09-19 12:20:43.388] initiate_stratum
 [2022-09-19 12:20:43.389] initiate_stratum
 [2022-09-19 12:20:43.390] initiate_stratum
 [2022-09-19 12:20:43.814] LOW POWER MODE!
 [2022-09-19 12:20:43.815] in stratum_sthread
 [2022-09-19 12:20:43.816] Pool 0 difficulty changed to 65536
 [2022-09-19 12:20:43.817] LOW POWER MODE!
 [2022-09-19 12:20:43.818] in stratum_sthread
 [2022-09-19 12:20:43.818] Pool 2 difficulty changed to 65536
 [2022-09-19 12:20:43.857] Network diff set to 32T
 [2022-09-19 12:20:43.862] Stratum from pool 0 requested work restart
 [2022-09-19 12:20:43.943] POOL 0 support ab mode!
 [2022-09-19 12:20:44.198] LOW POWER MODE!
 [2022-09-19 12:20:44.199] in stratum_sthread
 [2022-09-19 12:20:44.200] Pool 1 difficulty changed to 65536
 [2022-09-19 12:20:44.388]  signal_work_update set work_update true
 [2022-09-19 12:20:44.390] API: ignored invalid IPv4 address 'W:*' (as ::ffff:*.0.0.0)
 [2022-09-19 12:20:49.390] API running in IP access mode on port 4028 (9)
 [2022-09-19 12:21:02.402]  signal_work_update set work_update true
2022-09-19 12:19:40 driver-btm-soc.c:6520:bitmain_soc_init: This is Antminer S9 SE scan user version
2022-09-19 12:19:40 driver-btm-soc.c:6526:bitmain_soc_init: special mode: disabled
2022-09-19 12:19:40 driver-btm-soc.c:6533:bitmain_soc_init: This is high performance mode
2022-09-19 12:19:40 driver-btm-soc.c:6538:bitmain_soc_init: last commit version: 99791ac commit time: 2019-09-17  
19:17:44 build: 2019-09-18 16:00:29
2022-09-19 12:19:40 driver-btm-soc.c:6559:bitmain_soc_init: Detect 256MB control board of XILINX
2022-09-19 12:19:40 driver-btm-soc.c:6562:bitmain_soc_init: Miner compile time: Wed Sep 18 15:51:07 CST 2019  
type: Antminer S9 SE
2022-09-19 12:19:40 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x4
2022-09-19 12:19:40 driver-btm-soc.c:851:check_chain: !! chain[2]is exist
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7e ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000010 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000020 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000030 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000070 ff ff ff ff ff ff ff ff   ff 01 02 1f fc 28 fd ff
00000080 ff ff ff ff ff ff ff aa   57 57 57 57 57 57 57 57
00000090 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000a0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000b0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000c0 57 57 57 57 00 ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 32 15 00 00   a0 ff ff ff 39 10 40 ca

read chain[2] hardware info:
major type: 0
minor type: 4
chip level: 2
bom version: 0x10
pcb version: 0x39
fixture 8pattern result: L0

sweep config for eco mode:
sweep_start_voltage: 9.10
max_aging_voltage:   9.40
sweep_min_freq:      310M
sweep_max_freq:      360M

sweep config for hpf mode:
sweep_start_voltage: 9.40
max_aging_voltage:   9.70
sweep_min_freq:      400M
sweep_max_freq:      450M
2022-09-19 12:19:44 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x4
2022-09-19 12:19:44 driver-btm-soc.c:851:check_chain: !! chain[2]is exist
2022-09-19 12:19:44 driver-btm-soc.c:5965:get_freq_result_from_eeprom: orginal chip freq:
chain 2 freq:
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435

2022-09-19 12:19:44 driver-btm-soc.c:6647:bitmain_soc_init: reset all...
2022-09-19 12:19:46 driver-btm-soc.c:6655:bitmain_soc_init: miner ID : 802245c815408854
2022-09-19 12:19:46 driver-btm-soc.c:6359:init_miner_version: FPGA Version = 0xB00D
2022-09-19 12:19:53 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177
2022-09-19 12:19:53 power.c:185:power_init: power init ...
2022-09-19 12:19:53 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.70] from chain[2]  
eeprom
2022-09-19 12:19:53 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.70
2022-09-19 12:19:53 driver-btm-soc.c:5754:update_highest_voltage: chain 2 hpf working voltage 9.40
2022-09-19 12:19:53 driver-btm-soc.c:5763:update_highest_voltage: open core at max voltage 10.15
2022-09-19 12:19:53 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage:  
10.15 ...
2022-09-19 12:19:54 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.15
2022-09-19 12:19:54 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[2] hash rate = 5426
2022-09-19 12:19:54 driver-btm-soc.c:1192:get_eeprom_total_hash_rate: total rate = 5426
2022-09-19 12:19:54 driver-btm-soc.c:1200:get_ideal_hash_rate: get ideal hash rate 5000
2022-09-19 12:19:54 eeprom.c:669:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7e
freq data per ASIC:
IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275  
IC[008]:1275 IC[009]:1275
IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275  
IC[018]:1275 IC[019]:1275
IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275  
IC[028]:1275 IC[029]:1275
IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275  
IC[038]:1275 IC[039]:1275
IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275  
IC[048]:1275 IC[049]:1275
IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275  
IC[058]:1275 IC[059]:1275
voltage: 11.10 V
hash rate: -0001 GH/s

freq data per ASIC in mode2:
IC[000]:435 IC[001]:435 IC[002]:435 IC[003]:435 IC[004]:435 IC[005]:435 IC[006]:435 IC[007]:435 IC[008]:435  
IC[009]:435
IC[010]:435 IC[011]:435 IC[012]:435 IC[013]:435 IC[014]:435 IC[015]:435 IC[016]:435 IC[017]:435 IC[018]:435  
IC[019]:435
IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:435 IC[024]:435 IC[025]:435 IC[026]:435 IC[027]:435 IC[028]:435  
IC[029]:435
IC[030]:435 IC[031]:435 IC[032]:435 IC[033]:435 IC[034]:435 IC[035]:435 IC[036]:435 IC[037]:435 IC[038]:435  
IC[039]:435
IC[040]:435 IC[041]:435 IC[042]:435 IC[043]:435 IC[044]:435 IC[045]:435 IC[046]:435 IC[047]:435 IC[048]:435  
IC[049]:435
IC[050]:435 IC[051]:435 IC[052]:435 IC[053]:435 IC[054]:435 IC[055]:435 IC[056]:435 IC[057]:435 IC[058]:435  
IC[059]:435
voltage in mode2: 9.40 V
hash rate in mode2: 05426 GH/s

2022-09-19 12:19:54 driver-btm-soc.c:6698:bitmain_soc_init: fan_eft : 0  fan_pwm : 0
2022-09-19 12:19:54 driver-btm-soc.c:6388:bring_up_chain:

bring up chain 2
2022-09-19 12:19:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 12:20:27 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 12:20:29 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 2, find asic num = 40
2022-09-19 12:20:29 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 12:20:30 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 12:20:33 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 2, find asic num = 57
2022-09-19 12:20:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 12:20:34 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 12:20:35 driver-btm-soc.c:4011:check_asic_num: check asic num with pre_open_core
2022-09-19 12:20:35 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-09-19 12:20:35 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 12:20:36 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 12:20:37 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 2
2022-09-19 12:20:37 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 2
2022-09-19 12:20:39 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 2, find asic num = 40
2022-09-19 12:20:39 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-09-19 12:20:39 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 12:20:40 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 12:20:41 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 2
2022-09-19 12:20:41 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 2
2022-09-19 12:20:42 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 2, find asic num = 42
2022-09-19 12:20:43 driver-btm-soc.c:4033:check_asic_num: chian 2 check asic number failed!
2022-09-19 12:20:43 driver-btm-soc.c:7429:bitmain_soc_prepare: bitmain soc init failed.
2022-09-19 12:20:43 util.c:2178:process_version_mask: Pool 0 Version num is 2
2022-09-19 12:20:44 driver-btm-soc.c:7104:send_job: Version num 2

Copyright © 2013-2014, Bitmain Technologies

Здравствуйте! Ремонтник из меня никакой, помогите, пожалуйста, определить проблему! Асик s9se теряет ножи, даже в процессе работы. Забрал домой, помучал немного, закономерности не выявил. Менял местами шлейфы и гнезда - без толку, каждый раз неожиданный результат, один из следующих:

1 Подключен один нож (любой в любое гнездо) - не видит его, в веб-морде иероглифы "нет данных"

2 Подключен один нож (любой в любое гнездо) - видит его, в веб-морде у соответствующей "чейн" - 0 частота, 0 хэш, температур и чипов нет вообще (этот случай в логе)

3 Подключен один нож (#3) - видит его, майнит нормально.

4 Подключены 2 ножа - один видит, один как в п.2. Майнит на одном ноже.

 

Залил еще раз заводскую прошивку - не помогло. Сегодня еще попробую резетнуть.

Многократные отключения света могли ему мозги стряхнуть? Можно ли вылечить дома?

[Splinter]

@Berks По логу у вас подключенная хэш-плата неисправна.

По словесному описанию - попробуйте поменять БП на заведомо исправный.

[Berks]

@Splinter Спасибо за ответ!

БП (APW3++) за день до этого стоял полгода на рабочем асике, самом беспроблемном, кстати.

А этот пациент - самый проблемный с августа. Несколько раз терял одну хэш-плату (какую - не знаю, нет удаленного доступа), иногда после откл/вкл света, иногда просто в процессе работы. Восстанавливалось само, как правило, на следующий день, без всяких перезагрузок и отключений. История последних дней:

14/09 опять отвалилась одна плата

15/09 отключился полностью. Приехал посмотреть - стоит, гудит, диоды не горят. Передернул питание - запустился: нож1 -работает, нож2 - вообще нет строки, нож3 -строка есть, но нули по хешу и пустота по чипам. Забрал домой для опытов - и результат выше. Платы то работают парой, то одна, то ни одной, причем все по-разному.

Попалась в инете фраза (видимо перевод с мануала), что при частом отключении света на платах может что-то глюкнуть и надо перепрошивать. Но никаких подробностей.

В сервис нести - жаба давит, вряд ли он окупит затраты на ремонт. Себя-то еле как окупил с нынешним курсом.

[Berks]

Спойлер

 

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25672K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12632K (cceab000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 20/9, WL threshold: 4096, image sequence number: 1827870470
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 62D65561-DF66-4383-95E4-583F89559B9A, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3601/723, WL threshold: 4096, image sequence number: 3547329458
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B852FC58-59EF-482E-A0E3-C3ADA716F2F0, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab00d
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
 [2022-09-19 11:50:56.173] httpListenThread start ret=0
 [2022-09-19 11:51:26.174] start listen on 6060 ...
 [2022-09-19 11:52:58.424] Probing for an alive pool
 [2022-09-19 11:52:58.425] initiate_stratum
 [2022-09-19 11:52:58.425] initiate_stratum
 [2022-09-19 11:52:58.427] initiate_stratum
 [2022-09-19 11:52:58.830] LOW POWER MODE!
 [2022-09-19 11:52:58.831] LOW POWER MODE!
 [2022-09-19 11:52:58.831] Switching to pool 2 stratum+tcp://ss.ru.antpool.com:3333 - first alive pool
 [2022-09-19 11:52:58.832] Pool 0 stratum+tcp://ss.antpool.com:3333 alive, testing stability
 [2022-09-19 11:52:58.833] in stratum_sthread
 [2022-09-19 11:52:58.833] Pool 0 difficulty changed to 131072
 [2022-09-19 11:52:58.833] in stratum_sthread
 [2022-09-19 11:52:58.833] Pool 2 difficulty changed to 131072
 [2022-09-19 11:52:58.876] Network diff set to 32T
 [2022-09-19 11:52:58.957] POOL 0 support ab mode!
 [2022-09-19 11:52:58.958] POOL 2 support ab mode!
 [2022-09-19 11:52:59.289] LOW POWER MODE!
 [2022-09-19 11:52:59.289] Pool 1 stratum+tcp://172.65.208.78:3333 alive, testing stability
 [2022-09-19 11:52:59.289] Switching to pool 0 stratum+tcp://ss.antpool.com:3333
 [2022-09-19 11:52:59.290] in stratum_sthread
 [2022-09-19 11:52:59.290] Pool 1 difficulty changed to 65536
 [2022-09-19 11:52:59.425]  signal_work_update set work_update true
 [2022-09-19 11:52:59.426] API: ignored invalid IPv4 address 'W:*' (as ::ffff:*.0.0.0)
 [2022-09-19 11:53:04.427] API running in IP access mode on port 4028 (9)
 [2022-09-19 11:53:27.435]  signal_work_update set work_update true
2022-09-19 11:50:56 driver-btm-soc.c:6520:bitmain_soc_init: This is Antminer S9 SE scan user version
2022-09-19 11:50:56 driver-btm-soc.c:6526:bitmain_soc_init: special mode: disabled
2022-09-19 11:50:56 driver-btm-soc.c:6533:bitmain_soc_init: This is high performance mode
2022-09-19 11:50:56 driver-btm-soc.c:6538:bitmain_soc_init: last commit version: 99791ac commit time: 2019-09-17 19:17:44 build: 2019-09-18 16:00:29
2022-09-19 11:50:56 driver-btm-soc.c:6559:bitmain_soc_init: Detect 256MB control board of XILINX
2022-09-19 11:50:56 driver-btm-soc.c:6562:bitmain_soc_init: Miner compile time: Wed Sep 18 15:51:07 CST 2019 type: Antminer S9 SE
2022-09-19 11:50:56 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0xc
2022-09-19 11:50:56 driver-btm-soc.c:851:check_chain: !! chain[2]is exist
2022-09-19 11:50:56 driver-btm-soc.c:851:check_chain: !! chain[3]is exist
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7e ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000010 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000020 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000030 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000070 ff ff ff ff ff ff ff ff   ff 01 02 1f fc 28 fd ff
00000080 ff ff ff ff ff ff ff aa   57 57 57 57 57 57 57 57
00000090 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000a0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000b0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000c0 57 57 57 57 00 ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 32 15 00 00   a0 ff ff ff 39 10 40 ca
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7e ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000010 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000020 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000030 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000070 ff ff ff ff ff ff ff ff   ff 01 02 1f fc 28 fd ff
00000080 ff ff ff ff ff ff ff aa   57 57 57 57 57 57 57 57
00000090 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000a0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000b0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000c0 57 57 57 57 00 ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 32 15 00 00   a0 ff ff ff 39 10 40 ca

read chain[2] hardware info:
major type: 0
minor type: 4
chip level: 2
bom version: 0x10
pcb version: 0x39
fixture 8pattern result: L0

read chain[3] hardware info:
major type: 0
minor type: 4
chip level: 2
bom version: 0x10
pcb version: 0x39
fixture 8pattern result: L0

sweep config for eco mode:
sweep_start_voltage: 9.10
max_aging_voltage:   9.40
sweep_min_freq:      310M
sweep_max_freq:      360M

sweep config for hpf mode:
sweep_start_voltage: 9.40
max_aging_voltage:   9.70
sweep_min_freq:      400M
sweep_max_freq:      450M
2022-09-19 11:51:03 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0xc
2022-09-19 11:51:03 driver-btm-soc.c:851:check_chain: !! chain[2]is exist
2022-09-19 11:51:03 driver-btm-soc.c:851:check_chain: !! chain[3]is exist
2022-09-19 11:51:03 driver-btm-soc.c:5965:get_freq_result_from_eeprom: orginal chip freq:
chain 2 freq:
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435

chain 3 freq:
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435

2022-09-19 11:51:04 driver-btm-soc.c:6647:bitmain_soc_init: reset all...
2022-09-19 11:51:06 driver-btm-soc.c:6655:bitmain_soc_init: miner ID : 802245c815408854
2022-09-19 11:51:06 driver-btm-soc.c:6359:init_miner_version: FPGA Version = 0xB00D
2022-09-19 11:51:19 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177
2022-09-19 11:51:20 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[3] PIC software version: 177
2022-09-19 11:51:20 power.c:185:power_init: power init ...
2022-09-19 11:51:20 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.70] from chain[2] eeprom
2022-09-19 11:51:20 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.70
2022-09-19 11:51:20 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.70] from chain[3] eeprom
2022-09-19 11:51:20 power.c:232:set_working_voltage_by_chain: chain[3] working_voltage = 9.70
2022-09-19 11:51:20 driver-btm-soc.c:5754:update_highest_voltage: chain 2 hpf working voltage 9.40
2022-09-19 11:51:20 driver-btm-soc.c:5754:update_highest_voltage: chain 3 hpf working voltage 9.40
2022-09-19 11:51:20 driver-btm-soc.c:5763:update_highest_voltage: open core at max voltage 10.15
2022-09-19 11:51:20 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.15 ...
2022-09-19 11:51:20 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.15
2022-09-19 11:51:21 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[3] setting to highest voltage: 10.15 ...
2022-09-19 11:51:22 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.15
2022-09-19 11:51:22 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[2] hash rate = 5426
2022-09-19 11:51:22 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[3] hash rate = 5426
2022-09-19 11:51:23 driver-btm-soc.c:1192:get_eeprom_total_hash_rate: total rate = 10852
2022-09-19 11:51:23 driver-btm-soc.c:1200:get_ideal_hash_rate: get ideal hash rate 10000
2022-09-19 11:51:23 eeprom.c:669:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7e
freq data per ASIC:
IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
voltage: 11.10 V
hash rate: -0001 GH/s

freq data per ASIC in mode2:
IC[000]:435 IC[001]:435 IC[002]:435 IC[003]:435 IC[004]:435 IC[005]:435 IC[006]:435 IC[007]:435 IC[008]:435 IC[009]:435
IC[010]:435 IC[011]:435 IC[012]:435 IC[013]:435 IC[014]:435 IC[015]:435 IC[016]:435 IC[017]:435 IC[018]:435 IC[019]:435
IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:435 IC[024]:435 IC[025]:435 IC[026]:435 IC[027]:435 IC[028]:435 IC[029]:435
IC[030]:435 IC[031]:435 IC[032]:435 IC[033]:435 IC[034]:435 IC[035]:435 IC[036]:435 IC[037]:435 IC[038]:435 IC[039]:435
IC[040]:435 IC[041]:435 IC[042]:435 IC[043]:435 IC[044]:435 IC[045]:435 IC[046]:435 IC[047]:435 IC[048]:435 IC[049]:435
IC[050]:435 IC[051]:435 IC[052]:435 IC[053]:435 IC[054]:435 IC[055]:435 IC[056]:435 IC[057]:435 IC[058]:435 IC[059]:435
voltage in mode2: 9.40 V
hash rate in mode2: 05426 GH/s

2022-09-19 11:51:23 eeprom.c:669:travel_eeprom_store: chain[3] data in eeprom is:
magic number: 0x7e
freq data per ASIC:
IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
voltage: 11.10 V
hash rate: -0001 GH/s

freq data per ASIC in mode2:
IC[000]:435 IC[001]:435 IC[002]:435 IC[003]:435 IC[004]:435 IC[005]:435 IC[006]:435 IC[007]:435 IC[008]:435 IC[009]:435
IC[010]:435 IC[011]:435 IC[012]:435 IC[013]:435 IC[014]:435 IC[015]:435 IC[016]:435 IC[017]:435 IC[018]:435 IC[019]:435
IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:435 IC[024]:435 IC[025]:435 IC[026]:435 IC[027]:435 IC[028]:435 IC[029]:435
IC[030]:435 IC[031]:435 IC[032]:435 IC[033]:435 IC[034]:435 IC[035]:435 IC[036]:435 IC[037]:435 IC[038]:435 IC[039]:435
IC[040]:435 IC[041]:435 IC[042]:435 IC[043]:435 IC[044]:435 IC[045]:435 IC[046]:435 IC[047]:435 IC[048]:435 IC[049]:435
IC[050]:435 IC[051]:435 IC[052]:435 IC[053]:435 IC[054]:435 IC[055]:435 IC[056]:435 IC[057]:435 IC[058]:435 IC[059]:435
voltage in mode2: 9.40 V
hash rate in mode2: 05426 GH/s

2022-09-19 11:51:23 driver-btm-soc.c:6698:bitmain_soc_init: fan_eft : 0  fan_pwm : 0
2022-09-19 11:51:23 driver-btm-soc.c:6388:bring_up_chain:

bring up chain 2
2022-09-19 11:51:23 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:51:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:51:57 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 2, find asic num = 40
2022-09-19 11:51:57 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:51:58 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:01 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 2, find asic num = 57
2022-09-19 11:52:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:52:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:03 driver-btm-soc.c:4011:check_asic_num: check asic num with pre_open_core
2022-09-19 11:52:03 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-09-19 11:52:03 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:52:04 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:05 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 2
2022-09-19 11:52:05 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 2
2022-09-19 11:52:07 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 2, find asic num = 40
2022-09-19 11:52:07 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-09-19 11:52:07 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:52:08 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:09 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 2
2022-09-19 11:52:09 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 2
2022-09-19 11:52:10 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 2, find asic num = 50
2022-09-19 11:52:11 driver-btm-soc.c:4033:check_asic_num: chian 2 check asic number failed!
2022-09-19 11:52:11 driver-btm-soc.c:6388:bring_up_chain:

bring up chain 3
2022-09-19 11:52:11 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:43 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:45 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 3, find asic num = 0
2022-09-19 11:52:45 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:46 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:48 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 3, find asic num = 0
2022-09-19 11:52:48 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:49 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:50 driver-btm-soc.c:4011:check_asic_num: check asic num with pre_open_core
2022-09-19 11:52:50 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-09-19 11:52:50 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:51 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:52 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 3
2022-09-19 11:52:53 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 3
2022-09-19 11:52:54 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 3, find asic num = 0
2022-09-19 11:52:54 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-09-19 11:52:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:56 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 3
2022-09-19 11:52:56 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 3
2022-09-19 11:52:57 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 3, find asic num = 0
2022-09-19 11:52:58 driver-btm-soc.c:4033:check_asic_num: chian 3 check asic number failed!
2022-09-19 11:52:58 driver-btm-soc.c:7429:bitmain_soc_prepare: bitmain soc init failed.
2022-09-19 11:52:58 util.c:2178:process_version_mask: Pool 0 Version num is 2
2022-09-19 11:52:58 util.c:2178:process_version_mask: Pool 2 Version num is 2
2022-09-19 11:52:59 driver-btm-soc.c:7104:send_job: Version num 2

Вот первый по хронологии лог, когда  нож#1 отключен, а из двух оставшихся работает только #3 (чейн2). В следующем опыте (предыдущий мой лог) этот нож в одиночку не заработал.

[Splinter]

4 часа назад, Berks сказал:

  Скрыть контент

 

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25672K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12632K (cceab000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 20/9, WL threshold: 4096, image sequence number: 1827870470
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 62D65561-DF66-4383-95E4-583F89559B9A, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3601/723, WL threshold: 4096, image sequence number: 3547329458
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B852FC58-59EF-482E-A0E3-C3ADA716F2F0, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab00d
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
 [2022-09-19 11:50:56.173] httpListenThread start ret=0
 [2022-09-19 11:51:26.174] start listen on 6060 ...
 [2022-09-19 11:52:58.424] Probing for an alive pool
 [2022-09-19 11:52:58.425] initiate_stratum
 [2022-09-19 11:52:58.425] initiate_stratum
 [2022-09-19 11:52:58.427] initiate_stratum
 [2022-09-19 11:52:58.830] LOW POWER MODE!
 [2022-09-19 11:52:58.831] LOW POWER MODE!
 [2022-09-19 11:52:58.831] Switching to pool 2 stratum+tcp://ss.ru.antpool.com:3333 - first alive pool
 [2022-09-19 11:52:58.832] Pool 0 stratum+tcp://ss.antpool.com:3333 alive, testing stability
 [2022-09-19 11:52:58.833] in stratum_sthread
 [2022-09-19 11:52:58.833] Pool 0 difficulty changed to 131072
 [2022-09-19 11:52:58.833] in stratum_sthread
 [2022-09-19 11:52:58.833] Pool 2 difficulty changed to 131072
 [2022-09-19 11:52:58.876] Network diff set to 32T
 [2022-09-19 11:52:58.957] POOL 0 support ab mode!
 [2022-09-19 11:52:58.958] POOL 2 support ab mode!
 [2022-09-19 11:52:59.289] LOW POWER MODE!
 [2022-09-19 11:52:59.289] Pool 1 stratum+tcp://172.65.208.78:3333 alive, testing stability
 [2022-09-19 11:52:59.289] Switching to pool 0 stratum+tcp://ss.antpool.com:3333
 [2022-09-19 11:52:59.290] in stratum_sthread
 [2022-09-19 11:52:59.290] Pool 1 difficulty changed to 65536
 [2022-09-19 11:52:59.425]  signal_work_update set work_update true
 [2022-09-19 11:52:59.426] API: ignored invalid IPv4 address 'W:*' (as ::ffff:*.0.0.0)
 [2022-09-19 11:53:04.427] API running in IP access mode on port 4028 (9)
 [2022-09-19 11:53:27.435]  signal_work_update set work_update true
2022-09-19 11:50:56 driver-btm-soc.c:6520:bitmain_soc_init: This is Antminer S9 SE scan user version
2022-09-19 11:50:56 driver-btm-soc.c:6526:bitmain_soc_init: special mode: disabled
2022-09-19 11:50:56 driver-btm-soc.c:6533:bitmain_soc_init: This is high performance mode
2022-09-19 11:50:56 driver-btm-soc.c:6538:bitmain_soc_init: last commit version: 99791ac commit time: 2019-09-17 19:17:44 build: 2019-09-18 16:00:29
2022-09-19 11:50:56 driver-btm-soc.c:6559:bitmain_soc_init: Detect 256MB control board of XILINX
2022-09-19 11:50:56 driver-btm-soc.c:6562:bitmain_soc_init: Miner compile time: Wed Sep 18 15:51:07 CST 2019 type: Antminer S9 SE
2022-09-19 11:50:56 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0xc
2022-09-19 11:50:56 driver-btm-soc.c:851:check_chain: !! chain[2]is exist
2022-09-19 11:50:56 driver-btm-soc.c:851:check_chain: !! chain[3]is exist
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7e ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000010 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000020 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000030 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000070 ff ff ff ff ff ff ff ff   ff 01 02 1f fc 28 fd ff
00000080 ff ff ff ff ff ff ff aa   57 57 57 57 57 57 57 57
00000090 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000a0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000b0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000c0 57 57 57 57 00 ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 32 15 00 00   a0 ff ff ff 39 10 40 ca
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7e ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000010 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000020 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000030 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000070 ff ff ff ff ff ff ff ff   ff 01 02 1f fc 28 fd ff
00000080 ff ff ff ff ff ff ff aa   57 57 57 57 57 57 57 57
00000090 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000a0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000b0 57 57 57 57 57 57 57 57   57 57 57 57 57 57 57 57
000000c0 57 57 57 57 00 ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 32 15 00 00   a0 ff ff ff 39 10 40 ca

read chain[2] hardware info:
major type: 0
minor type: 4
chip level: 2
bom version: 0x10
pcb version: 0x39
fixture 8pattern result: L0

read chain[3] hardware info:
major type: 0
minor type: 4
chip level: 2
bom version: 0x10
pcb version: 0x39
fixture 8pattern result: L0

sweep config for eco mode:
sweep_start_voltage: 9.10
max_aging_voltage:   9.40
sweep_min_freq:      310M
sweep_max_freq:      360M

sweep config for hpf mode:
sweep_start_voltage: 9.40
max_aging_voltage:   9.70
sweep_min_freq:      400M
sweep_max_freq:      450M
2022-09-19 11:51:03 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0xc
2022-09-19 11:51:03 driver-btm-soc.c:851:check_chain: !! chain[2]is exist
2022-09-19 11:51:03 driver-btm-soc.c:851:check_chain: !! chain[3]is exist
2022-09-19 11:51:03 driver-btm-soc.c:5965:get_freq_result_from_eeprom: orginal chip freq:
chain 2 freq:
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435

chain 3 freq:
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435
435 435 435 435 435 435 435 435 435 435

2022-09-19 11:51:04 driver-btm-soc.c:6647:bitmain_soc_init: reset all...
2022-09-19 11:51:06 driver-btm-soc.c:6655:bitmain_soc_init: miner ID : 802245c815408854
2022-09-19 11:51:06 driver-btm-soc.c:6359:init_miner_version: FPGA Version = 0xB00D
2022-09-19 11:51:19 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177
2022-09-19 11:51:20 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[3] PIC software version: 177
2022-09-19 11:51:20 power.c:185:power_init: power init ...
2022-09-19 11:51:20 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.70] from chain[2] eeprom
2022-09-19 11:51:20 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.70
2022-09-19 11:51:20 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.70] from chain[3] eeprom
2022-09-19 11:51:20 power.c:232:set_working_voltage_by_chain: chain[3] working_voltage = 9.70
2022-09-19 11:51:20 driver-btm-soc.c:5754:update_highest_voltage: chain 2 hpf working voltage 9.40
2022-09-19 11:51:20 driver-btm-soc.c:5754:update_highest_voltage: chain 3 hpf working voltage 9.40
2022-09-19 11:51:20 driver-btm-soc.c:5763:update_highest_voltage: open core at max voltage 10.15
2022-09-19 11:51:20 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.15 ...
2022-09-19 11:51:20 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.15
2022-09-19 11:51:21 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[3] setting to highest voltage: 10.15 ...
2022-09-19 11:51:22 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.15
2022-09-19 11:51:22 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[2] hash rate = 5426
2022-09-19 11:51:22 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[3] hash rate = 5426
2022-09-19 11:51:23 driver-btm-soc.c:1192:get_eeprom_total_hash_rate: total rate = 10852
2022-09-19 11:51:23 driver-btm-soc.c:1200:get_ideal_hash_rate: get ideal hash rate 10000
2022-09-19 11:51:23 eeprom.c:669:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7e
freq data per ASIC:
IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
voltage: 11.10 V
hash rate: -0001 GH/s

freq data per ASIC in mode2:
IC[000]:435 IC[001]:435 IC[002]:435 IC[003]:435 IC[004]:435 IC[005]:435 IC[006]:435 IC[007]:435 IC[008]:435 IC[009]:435
IC[010]:435 IC[011]:435 IC[012]:435 IC[013]:435 IC[014]:435 IC[015]:435 IC[016]:435 IC[017]:435 IC[018]:435 IC[019]:435
IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:435 IC[024]:435 IC[025]:435 IC[026]:435 IC[027]:435 IC[028]:435 IC[029]:435
IC[030]:435 IC[031]:435 IC[032]:435 IC[033]:435 IC[034]:435 IC[035]:435 IC[036]:435 IC[037]:435 IC[038]:435 IC[039]:435
IC[040]:435 IC[041]:435 IC[042]:435 IC[043]:435 IC[044]:435 IC[045]:435 IC[046]:435 IC[047]:435 IC[048]:435 IC[049]:435
IC[050]:435 IC[051]:435 IC[052]:435 IC[053]:435 IC[054]:435 IC[055]:435 IC[056]:435 IC[057]:435 IC[058]:435 IC[059]:435
voltage in mode2: 9.40 V
hash rate in mode2: 05426 GH/s

2022-09-19 11:51:23 eeprom.c:669:travel_eeprom_store: chain[3] data in eeprom is:
magic number: 0x7e
freq data per ASIC:
IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
voltage: 11.10 V
hash rate: -0001 GH/s

freq data per ASIC in mode2:
IC[000]:435 IC[001]:435 IC[002]:435 IC[003]:435 IC[004]:435 IC[005]:435 IC[006]:435 IC[007]:435 IC[008]:435 IC[009]:435
IC[010]:435 IC[011]:435 IC[012]:435 IC[013]:435 IC[014]:435 IC[015]:435 IC[016]:435 IC[017]:435 IC[018]:435 IC[019]:435
IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:435 IC[024]:435 IC[025]:435 IC[026]:435 IC[027]:435 IC[028]:435 IC[029]:435
IC[030]:435 IC[031]:435 IC[032]:435 IC[033]:435 IC[034]:435 IC[035]:435 IC[036]:435 IC[037]:435 IC[038]:435 IC[039]:435
IC[040]:435 IC[041]:435 IC[042]:435 IC[043]:435 IC[044]:435 IC[045]:435 IC[046]:435 IC[047]:435 IC[048]:435 IC[049]:435
IC[050]:435 IC[051]:435 IC[052]:435 IC[053]:435 IC[054]:435 IC[055]:435 IC[056]:435 IC[057]:435 IC[058]:435 IC[059]:435
voltage in mode2: 9.40 V
hash rate in mode2: 05426 GH/s

2022-09-19 11:51:23 driver-btm-soc.c:6698:bitmain_soc_init: fan_eft : 0  fan_pwm : 0
2022-09-19 11:51:23 driver-btm-soc.c:6388:bring_up_chain:

bring up chain 2
2022-09-19 11:51:23 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:51:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:51:57 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 2, find asic num = 40
2022-09-19 11:51:57 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:51:58 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:01 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 2, find asic num = 57
2022-09-19 11:52:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:52:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:03 driver-btm-soc.c:4011:check_asic_num: check asic num with pre_open_core
2022-09-19 11:52:03 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-09-19 11:52:03 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:52:04 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:05 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 2
2022-09-19 11:52:05 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 2
2022-09-19 11:52:07 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 2, find asic num = 40
2022-09-19 11:52:07 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-09-19 11:52:07 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-09-19 11:52:08 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:09 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 2
2022-09-19 11:52:09 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 2
2022-09-19 11:52:10 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 2, find asic num = 50
2022-09-19 11:52:11 driver-btm-soc.c:4033:check_asic_num: chian 2 check asic number failed!
2022-09-19 11:52:11 driver-btm-soc.c:6388:bring_up_chain:

bring up chain 3
2022-09-19 11:52:11 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:43 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:45 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 3, find asic num = 0
2022-09-19 11:52:45 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:46 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:48 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 3, find asic num = 0
2022-09-19 11:52:48 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:49 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:50 driver-btm-soc.c:4011:check_asic_num: check asic num with pre_open_core
2022-09-19 11:52:50 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-09-19 11:52:50 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:51 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:52 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 3
2022-09-19 11:52:53 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 3
2022-09-19 11:52:54 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 3, find asic num = 0
2022-09-19 11:52:54 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-09-19 11:52:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffb
2022-09-19 11:52:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff3
2022-09-19 11:52:56 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 3
2022-09-19 11:52:56 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 3
2022-09-19 11:52:57 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 3, find asic num = 0
2022-09-19 11:52:58 driver-btm-soc.c:4033:check_asic_num: chian 3 check asic number failed!
2022-09-19 11:52:58 driver-btm-soc.c:7429:bitmain_soc_prepare: bitmain soc init failed.
2022-09-19 11:52:58 util.c:2178:process_version_mask: Pool 0 Version num is 2
2022-09-19 11:52:58 util.c:2178:process_version_mask: Pool 2 Version num is 2
2022-09-19 11:52:59 driver-btm-soc.c:7104:send_job: Version num 2

Вот первый по хронологии лог, когда  нож#1 отключен, а из двух оставшихся работает только #3 (чейн2). В следующем опыте (предыдущий мой лог) этот нож в одиночку не заработал.

Если уверееы в БП то можете дальше не эксперементировать - у вас неисправны хэшплаты. Если вы не мастер то ничего с этим не сделаете. Рентабельность ремонта сразу трех плат в сервисе сомнительна. 

[Berks]

@Splinter Именно хэш-платы? Не контрольная?

Опять же выход из строя трех хэш-плат почти одновременно (но не одновременно!) - как-то сомнительно, мне кажется...

[Splinter]

5 часов назад, Berks сказал:

@Splinter Именно хэш-платы? Не контрольная?

По предоставленной информации, и в частности по логам, неисправны именно хэш-платы. Было некоторое подозрение на БП, но вы в нем уверенны. Поэтому больше нет вариантов дистанционной диагностики - более точно теперь только в сервисе.

5 часов назад, Berks сказал:

Опять же выход из строя трех хэш-плат почти одновременно (но не одновременно!) - как-то сомнительно, мне кажется...

А я не удивлен. Для 9SE/K это нормально. Один перегрев и все платы в минус. Да и без этого очень плохие аппараты.

[svm55]

13 часов назад, Berks сказал:

Именно хэш-платы? Не контрольная?

Да что думать? У Вас ведь это не единственный асик? Так поставьте подозрительную плату в исправный, пусть поработает.

[Berks]

12 часов назад, Splinter сказал:

Один перегрев и все платы в минус.

Так тут получается, что не один перегрев, а несколько, ибо не за раз все отвалились, а постепенно. И не наглухо, а иногда оживают. Поэтому не хочется применять критерий "в морг - значит в морг". Еще агонизирует.

Перегрев очень маловероятен, только если по инерции после отключения электричества. На входе выше +25 не было за всё лето, вентиляция избыточна для небольшого помещения.

У этой машинки еще была особенность, что иногда не подключалась к пулу (либо очень долго подключалась) после откл/вкл электричества.  Грешил на китайский БП, но с родным блоком тоже очень медленно выходила на пул.

 

4 часа назад, svm55 сказал:

Да что думать? У Вас ведь это не единственный асик? Так поставьте подозрительную плату в исправный, пусть поработает.

Ну да, 4 штуки). За месяц до этого у другой машинки тоже "отвалился" один нож, сейчас работает на двух. Попытаюсь из этих инвалидов собрать одного полноценного. Еще новый для меня нюанс, что, оказывается, не все хэш-платы могут вместе в одной машинке работать. Нужно чтоб одинаковые были major type, minor type, chip level..

 

[Daut Dbar]

Плата L3+ не было ri пока не подсоединил  проводам! Кто может подсказать где обрыв сидит ? Или через какой сигнал не проходит 

Изменено 24 сен 2022, 21:17 пользователем Daut Dbar

[Splinter]

11 часов назад, Daut Dbar сказал:

где обрыв сидит ?

Причем тут обрыв если у вас бустерный преобразователь не работает. Вы сами не поняли что этим проводочком сделали.

[avakyanartem]

В ближайшее время будет выпуск тестера хэш плат (S9, L3+, T17, S17E, S19) потихоньку буду добавлять поддержку других асиков. 

Если есть вопросы, то пишите. 

[Release the Kraken]

Всем добра.

 

Вышла из строя одна из хэшплат от S9. V4.21

Не определяется и не видится контролькой.

После прозвона контрольных точек удалось выявить что на некоторых чипах нет clk.

 

Вопрос такой. Достаточно ли удалить дефектные чипы или необходимо запаивать снова новые чипы?

[Protel Protel]

5 часов назад, Release the Kraken сказал:

Всем добра.

 

Вышла из строя одна из хэшплат от S9. V4.21

Не определяется и не видится контролькой.

После прозвона контрольных точек удалось выявить что на некоторых чипах нет clk.

 

Вопрос такой. Достаточно ли удалить дефектные чипы или необходимо запаивать снова новые чипы?

в мастерскую отнести надо, срочно! пока вирус раферсе не сожрал весь асик и не занял пол квартиры.

[dgoni]

народ !!! кто подскажет ? померла 1 плата на s9 (простой) есть плата с s9t если поставить, подойдёт или нет ???

[Splinter]

10 часов назад, Release the Kraken сказал:

Всем добра.

 

Вышла из строя одна из хэшплат от S9. V4.21

Не определяется и не видится контролькой.

После прозвона контрольных точек удалось выявить что на некоторых чипах нет clk.

 

Вопрос такой. Достаточно ли удалить дефектные чипы или необходимо запаивать снова новые чипы?

Оставив за скобками сомнительную методику диагностики, отвечу только на четко поставленный вопрос: необходимо установить исправные чипы, со снятым(и) чипом(и) работать не будет.

1 час назад, dgoni сказал:

есть плата с s9t

S9t? Нет такой модели.

1 час назад, dgoni сказал:

подойдёт или нет ?

Подойдет от s9j. А вот от S9i не подойдет - просто не полезет в корпус т.к. на ней радиаторы другой конфигурации.

[Lexis77]

14 часов назад, Release the Kraken сказал:

Достаточно ли удалить дефектные чипы или необходимо запаивать снова новые чипы?

Я "звездочкой" мажу и все снова работает.

[svart]

16 часов назад, Release the Kraken сказал:

Всем добра.

 

Вышла из строя одна из хэшплат от S9. V4.21

Не определяется и не видится контролькой.

После прозвона контрольных точек удалось выявить что на некоторых чипах нет clk.

 

Вопрос такой. Достаточно ли удалить дефектные чипы или необходимо запаивать снова новые чипы?

Что в логе?

[Release the Kraken]

в логе ничего. плата не видна.

перестановка шлейфов итп не дает результата. не горит rxtx красныи светодиод.

без контрольки от лабораторника плата потребляет 5А примерно.

Все силовые напряжения присутствуют. 13.55В. 8.9В. Кондеры исправны.

 

 

[svart]

Всем привет, плата с9 4.21, показывает 62 чипа. На первом чипе замыкаешь rst , показывает 0, на 2-ом - 1 и т. д. Замена первого чипа ни чего не дало, все сигналы в норме. Что может быть?

[svm55]

В 15.11.2022 в 14:25, svart сказал:

Что может быть?

Чего нибудь. Я бы отпаял второй и включил. Без всяких перемычек на землю RST  и пр. Покажет один асик? Если всё равно ноль, то копал бы первый чип и кругом него. Для начала подал бы с первого домена 1,8 вольта на RI между 1 и 2 (отпаянным) чипом. если опять ноль - надо всё таки добиться, чтоб был один. Не оглядываясь на все остальные чипы. Если вдруг стало один асик без второго чипа - заменил бы второй чип. Но вероятно, первый, и он ленивый. А по причине - нет контакта выводов 19,20,21,22,23 на землю. В таком случае все сигналы проходят, но чипа не видно. Возможно дорожки, они в этом месте часто отлетают, и потому замена чипа не помогает.

Изменено 17 ноя 2022, 12:03 пользователем svm55

[Daut Dbar]

Здравствуйте. Плата L3+ присутствует все 72 чипа , но греится ЛДО на последних доменах . В чем причина? Почему греится? 

[Protel Protel]

5 часов назад, Daut Dbar сказал:

Здравствуйте. Плата L3+ присутствует все 72 чипа , но греится ЛДО на последних доменах . В чем причина? Почему греится? 

отнесите мастеру.  

[svart]

В 15.11.2022 в 21:53, svm55 сказал:

Чего нибудь. Я бы отпаял второй и включил. Без всяких перемычек на землю RST  и пр. Покажет один асик? Если всё равно ноль, то копал бы первый чип и кругом него. Для начала подал бы с первого домена 1,8 вольта на RI между 1 и 2 (отпаянным) чипом. если опять ноль - надо всё таки добиться, чтоб был один. Не оглядываясь на все остальные чипы. Если вдруг стало один асик без второго чипа - заменил бы второй чип. Но вероятно, первый, и он ленивый. А по причине - нет контакта выводов 19,20,21,22,23 на землю. В таком случае все сигналы проходят, но чипа не видно. Возможно дорожки, они в этом месте часто отлетают, и потому замена чипа не помогает.

Привет, без второго чипа тоже 0, вокруг первого чипа прозвонил - все нормально. А  выводы  19-23 прозваниваются на землю(если правильно я тебя понял)?