Ремонт: Bitmain Antminer s7, s9, l3+

Gorby200 · 13 июн 2018, 16:55

День добрый, коллеги!

Сегодня приехал асик s9 13.5 . Очень загадочный. Прекрасно выходит на майнинг, майнит на своей номинальной скорости 2-3 минуты, потом скорость секунд за 30 падает до нуля практически, и потом опять секунд за 30 возрастает до номинала. По всем платам одинаково. Потом опять 2-3 минуты майнит, и цикл повторяется. Хозяин говорит, что в перегрел асик. В жаркие дни, говорит, по двум крайним лезвиям доходила температура до 100-105 градусов, центральное работало в лучших условиях: там 90-95 было. Глючить начало не сразу, а спустя сутки-двое после жары, когда температура уже выше 80-85 не поднималась.
Я менял блоки питания и контрольки - все то же самое, с разными блоками и контрольками. Судя по логам, пик говорит, что последнее лезвие на выброс, но как оно майнит-то при этом? Я проверял по пулу: действительно примерно так циклами и майнит с примерно такими пиковыми результатами.

Буду признателен за свежие мысли! Спасибо!

Spoiler

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000314] ps7-ttc #0 at df804000, irq=43
[ 0.000627] Console: colour dummy device 80x30
[ 0.000658] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040212] pid_max: default: 32768 minimum: 301
[ 0.040441] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040460] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042626] CPU: Testing write buffer coherency: ok
[ 0.042976] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043037] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043263] L310 cache controller enabled
[ 0.043283] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121042] CPU1: Booted secondary processor
[ 0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210365] Brought up 2 CPUs
[ 0.210385] SMP: Total of 2 processors activated.
[ 0.210393] CPU: All CPU(s) started in SVC mode.
[ 0.211090] devtmpfs: initialized
[ 0.213500] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214757] regulator-dummy: no parameters
[ 0.223742] NET: Registered protocol family 16
[ 0.226061] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228373] cpuidle: using governor ladder
[ 0.228386] cpuidle: using governor menu
[ 0.235892] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237428] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237442] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237562] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259312] bio: create slab <bio-0> at 0
[ 0.260940] vgaarb: loaded
[ 0.261685] SCSI subsystem initialized
[ 0.262595] usbcore: registered new interface driver usbfs
[ 0.262767] usbcore: registered new interface driver hub
[ 0.263001] usbcore: registered new device driver usb
[ 0.263533] media: Linux media interface: v0.10
[ 0.263691] Linux video capture interface: v2.00
[ 0.263933] pps_core: LinuxPPS API ver. 1 registered
[ 0.263945] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.264083] PTP clock support registered
[ 0.264441] EDAC MC: Ver: 3.0.0
[ 0.265508] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268527] DMA-API: preallocated 4096 debug entries
[ 0.268544] DMA-API: debugging enabled by kernel config
[ 0.268635] Switched to clocksource arm_global_timer
[ 0.290030] NET: Registered protocol family 2
[ 0.290715] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290772] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290857] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290908] TCP: reno registered
[ 0.290926] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290960] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291209] NET: Registered protocol family 1
[ 0.291562] RPC: Registered named UNIX socket transport module.
[ 0.291574] RPC: Registered udp transport module.
[ 0.291583] RPC: Registered tcp transport module.
[ 0.291591] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291604] PCI: CLS 0 bytes, default 64
[ 0.292079] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294149] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296291] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296489] msgmni has been set to 967
[ 0.297280] io scheduler noop registered
[ 0.297294] io scheduler deadline registered
[ 0.297342] io scheduler cfq registered (default)
[ 0.311504] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.311525] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.437904] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.005937] console [ttyPS0] enabled
[ 1.010255] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.017900] [drm] Initialized drm 1.1.0 20060810
[ 1.034964] brd: module loaded
[ 1.044526] loop: module loaded
[ 1.054430] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.060407] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.068185] libphy: XEMACPS mii bus: probed
[ 1.072674] ------------- phy_id = 0x3625e62
[ 1.077422] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.086060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092716] ehci-pci: EHCI PCI platform driver
[ 1.099951] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.106750] usbcore: registered new interface driver usb-storage
[ 1.113705] mousedev: PS/2 mouse device common for all mice
[ 1.119848] i2c /dev entries driver
[ 1.126812] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.132338] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.138230] Xilinx Zynq CpuIdle Driver started
[ 1.143108] sdhci: Secure Digital Host Controller Interface driver
[ 1.149293] sdhci: Copyright(c) Pierre Ossman
[ 1.153565] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.160404] mmc0: no vqmmc regulator found
[ 1.164418] mmc0: no vmmc regulator found
[ 1.208652] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.217369] usbcore: registered new interface driver usbhid
[ 1.222883] usbhid: USB HID core driver
[ 1.227627] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.233926] nand: Micron MT29F2G08ABAEAWP
[ 1.237894] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.243836] Bad block table found at page 131008, version 0x01
[ 1.250059] Bad block table found at page 130944, version 0x01
[ 1.256114] 3 ofpart partitions found on MTD device pl353-nand
[ 1.261892] Creating 3 MTD partitions on "pl353-nand":
[ 1.266984] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.275064] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.282411] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.291453] TCP: cubic registered
[ 1.294688] NET: Registered protocol family 17
[ 1.299417] Registering SWP/SWPB emulation handler
[ 1.305333] regulator-dummy: disabling
[ 1.309747] UBI: attaching mtd1 to ubi0
[ 1.726009] UBI: scanning is finished
[ 1.737838] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.744920] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.751682] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.758345] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.765223] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.771204] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.778312] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1134783803
[ 1.787354] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.796571] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.796576] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.800636] ALSA device list:
[ 1.800641] No soundcards found.
[ 1.817090] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 2.005621] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.011568] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.020679] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.030567] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.035599] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.053571] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.259520] devtmpfs: mounted
[ 2.262636] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 3.103449] random: dd urandom read with 0 bits of entropy available
[ 3.718674]
[ 3.718674] bcm54xx_config_init
[ 4.328672]
[ 4.328672] bcm54xx_config_init
[ 7.329507] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.335600] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 19.893780] In axi fpga driver!
[ 19.896852] request_mem_region OK!
[ 19.900289] AXI fpga dev virtual address is 0xdf9fc000
[ 19.905350] *base_vir_addr = 0x8c510
[ 19.921224] In fpga mem driver!
[ 19.924316] request_mem_region OK!
[ 19.927860] fpga mem virtual address is 0xe2000000
[ 20.708650]
[ 20.708650] bcm54xx_config_init
[ 21.338645]
[ 21.338645] bcm54xx_config_init
[ 24.339509] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 24.345532] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 734.783221] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 806825496600881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[0] has core num=1
Chain[5] ASIC[15] has core num=1
Chain[5] ASIC[24] has core num=10
Chain[5] ASIC[47] has core num=3
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[6] has core num=1
Chain[6] ASIC[9] has core num=15
Chain[6] ASIC[11] has core num=2
Chain[6] ASIC[14] has core num=15
Chain[6] ASIC[35] has core num=1
Chain[6] ASIC[54] has core num=8
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[0] has core num=1
Chain[7] ASIC[1] has core num=1
Chain[7] ASIC[2] has core num=1
Chain[7] ASIC[4] has core num=1
Chain[7] ASIC[5] has core num=3
Chain[7] ASIC[6] has core num=1
Chain[7] ASIC[7] has core num=1
Chain[7] ASIC[8] has core num=1
Chain[7] ASIC[9] has core num=1
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[11] has core num=2
Chain[7] ASIC[12] has core num=1
Chain[7] ASIC[13] has core num=1
Chain[7] ASIC[14] has core num=1
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[16] has core num=2
Chain[7] ASIC[17] has core num=3
Chain[7] ASIC[18] has core num=1
Chain[7] ASIC[19] has core num=1
Chain[7] ASIC[20] has core num=1
Chain[7] ASIC[21] has core num=1
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[23] has core num=1
Chain[7] ASIC[24] has core num=1
Chain[7] ASIC[25] has core num=1
Chain[7] ASIC[26] has core num=1
Chain[7] ASIC[27] has core num=1
Chain[7] ASIC[28] has core num=1
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[30] has core num=1
Chain[7] ASIC[31] has core num=1
Chain[7] ASIC[32] has core num=1
Chain[7] ASIC[33] has core num=1
Chain[7] ASIC[34] has core num=1
Chain[7] ASIC[35] has core num=1
Chain[7] ASIC[36] has core num=1
Chain[7] ASIC[37] has core num=1
Chain[7] ASIC[38] has core num=1
Chain[7] ASIC[39] has core num=1
Chain[7] ASIC[40] has core num=8
Chain[7] ASIC[41] has core num=1
Chain[7] ASIC[42] has core num=1
Chain[7] ASIC[43] has core num=2
Chain[7] ASIC[44] has core num=1
Chain[7] ASIC[45] has core num=1
Chain[7] ASIC[46] has core num=1
Chain[7] ASIC[47] has core num=2
Chain[7] ASIC[48] has core num=1
Chain[7] ASIC[49] has core num=1
Chain[7] ASIC[50] has core num=1
Chain[7] ASIC[51] has core num=1
Chain[7] ASIC[52] has core num=1
Chain[7] ASIC[53] has core num=1
Chain[7] ASIC[54] has core num=3
Chain[7] ASIC[55] has core num=1
Chain[7] ASIC[56] has core num=1
Chain[7] ASIC[57] has core num=1
Chain[7] ASIC[58] has core num=1
Chain[7] ASIC[59] has core num=1
Chain[7] ASIC[60] has core num=1
Chain[7] ASIC[61] has core num=1
Chain[7] ASIC[62] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1483 root 0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 1779 root 0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 806825496600881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=30600
get fan[2] speed=30600
get fan[2] speed=30600
get fan[2] speed=30600
get fan[2] speed=30600
get fan[2] speed=30600
get fan[5] speed=30600
get fan[2] speed=30600
get fan[5] speed=30600
get fan[2] speed=30600
get fan[5] speed=30600
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[0] has core num=1
Chain[J6] ASIC[15] has core num=1
Chain[J6] ASIC[24] has core num=10
Chain[J6] ASIC[47] has core num=3
Chain[J7] has core num in PIC
Chain[J7] ASIC[6] has core num=1
Chain[J7] ASIC[9] has core num=15
Chain[J7] ASIC[11] has core num=2
Chain[J7] ASIC[14] has core num=15
Chain[J7] ASIC[35] has core num=1
Chain[J7] ASIC[54] has core num=8
Chain[J8] has core num in PIC
Chain[J8] ASIC[0] has core num=1
Chain[J8] ASIC[1] has core num=1
Chain[J8] ASIC[2] has core num=1
Chain[J8] ASIC[4] has core num=1
Chain[J8] ASIC[5] has core num=3
Chain[J8] ASIC[6] has core num=1
Chain[J8] ASIC[7] has core num=1
Chain[J8] ASIC[8] has core num=1
Chain[J8] ASIC[9] has core num=1
Chain[J8] ASIC[10] has core num=1
Chain[J8] ASIC[11] has core num=2
Chain[J8] ASIC[12] has core num=1
Chain[J8] ASIC[13] has core num=1
Chain[J8] ASIC[14] has core num=1
Chain[J8] ASIC[15] has core num=1
Chain[J8] ASIC[16] has core num=2
Chain[J8] ASIC[17] has core num=3
Chain[J8] ASIC[18] has core num=1
Chain[J8] ASIC[19] has core num=1
Chain[J8] ASIC[20] has core num=1
Chain[J8] ASIC[21] has core num=1
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[23] has core num=1
Chain[J8] ASIC[24] has core num=1
Chain[J8] ASIC[25] has core num=1
Chain[J8] ASIC[26] has core num=1
Chain[J8] ASIC[27] has core num=1
Chain[J8] ASIC[28] has core num=1
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[30] has core num=1
Chain[J8] ASIC[31] has core num=1
Chain[J8] ASIC[32] has core num=1
Chain[J8] ASIC[33] has core num=1
Chain[J8] ASIC[34] has core num=1
Chain[J8] ASIC[35] has core num=1
Chain[J8] ASIC[36] has core num=1
Chain[J8] ASIC[37] has core num=1
Chain[J8] ASIC[38] has core num=1
Chain[J8] ASIC[39] has core num=1
Chain[J8] ASIC[40] has core num=8
Chain[J8] ASIC[41] has core num=1
Chain[J8] ASIC[42] has core num=1
Chain[J8] ASIC[43] has core num=2
Chain[J8] ASIC[44] has core num=1
Chain[J8] ASIC[45] has core num=1
Chain[J8] ASIC[46] has core num=1
Chain[J8] ASIC[47] has core num=2
Chain[J8] ASIC[48] has core num=1
Chain[J8] ASIC[49] has core num=1
Chain[J8] ASIC[50] has core num=1
Chain[J8] ASIC[51] has core num=1
Chain[J8] ASIC[52] has core num=1
Chain[J8] ASIC[53] has core num=1
Chain[J8] ASIC[54] has core num=3
Chain[J8] ASIC[55] has core num=1
Chain[J8] ASIC[56] has core num=1
Chain[J8] ASIC[57] has core num=1
Chain[J8] ASIC[58] has core num=1
Chain[J8] ASIC[59] has core num=1
Chain[J8] ASIC[60] has core num=1
Chain[J8] ASIC[61] has core num=1
Chain[J8] ASIC[62] has core num=2
miner total rate=13954GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=675
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 Asic[ 8]:675
Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 Asic[16]:675
Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675
Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675
Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675
Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675
Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675
Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:5 max freq=637
Chain:5 min freq=631

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=675
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Detect a bad chip=9 on chain[6], fixed to 400M
Asic[ 9]:675 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Detect a bad chip=14 on chain[6], fixed to 400M
Asic[14]:675 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=675
Chain:6 min freq=656

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637

max freq = 675
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:35 remote:36 offset:30
Chain[J6] chip[244] get middle temp offset=30 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:34 remote:36 offset:29
Chain[J7] chip[244] get middle temp offset=29 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:38 remote:41 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
single board rate=4555 voltage limit=890 on chain[5]
last_testpatten_highest_pcb_temp=58 too low, fix voltage=900 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 900
retryFlag=1 will set the voltage limited on chain[5], change voltage=900
now set pic voltage=74 on chain[5]
single board rate=4556 voltage limit=890 on chain[6]
last_testpatten_highest_pcb_temp=58 too low, fix voltage=900 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 900
retryFlag=1 will set the voltage limited on chain[6], change voltage=900
now set pic voltage=74 on chain[6]
single board rate=4523 voltage limit=890 on chain[7]
last_testpatten_highest_pcb_temp=58 too low, fix voltage=900 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 900
retryFlag=1 will set the voltage limited on chain[7], change voltage=900
now set pic voltage=74 on chain[7]
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912   asic[01]=912   asic[02]=912   asic[03]=912   asic[04]=912   asic[05]=912   asic[06]=912   asic[07]=912
asic[08]=912   asic[09]=912   asic[10]=912   asic[11]=912   asic[12]=912   asic[13]=912   asic[14]=912   asic[15]=912
asic[16]=912   asic[17]=912   asic[18]=912   asic[19]=912   asic[20]=912   asic[21]=912   asic[22]=912   asic[23]=912
asic[24]=912   asic[25]=912   asic[26]=912   asic[27]=912   asic[28]=912   asic[29]=912   asic[30]=912   asic[31]=912
asic[32]=912   asic[33]=912   asic[34]=912   asic[35]=912   asic[36]=912   asic[37]=912   asic[38]=912   asic[39]=912
asic[40]=912   asic[41]=912   asic[42]=912   asic[43]=912   asic[44]=912   asic[45]=912   asic[46]=912   asic[47]=912
asic[48]=912   asic[49]=912   asic[50]=912   asic[51]=912   asic[52]=912   asic[53]=912   asic[54]=912   asic[55]=912
asic[56]=912   asic[57]=912   asic[58]=912   asic[59]=912   asic[60]=912   asic[61]=912   asic[62]=912

Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

freq[00]=631   freq[01]=631   freq[02]=631   freq[03]=631   freq[04]=631   freq[05]=631   freq[06]=631   freq[07]=631
freq[08]=631   freq[09]=631   freq[10]=631   freq[11]=631   freq[12]=631   freq[13]=631   freq[14]=637   freq[15]=637
freq[16]=637   freq[17]=637   freq[18]=637   freq[19]=637   freq[20]=637   freq[21]=637   freq[22]=637   freq[23]=637
freq[24]=637   freq[25]=637   freq[26]=637   freq[27]=637   freq[28]=637   freq[29]=637   freq[30]=637   freq[31]=637
freq[32]=637   freq[33]=637   freq[34]=637   freq[35]=637   freq[36]=637   freq[37]=637   freq[38]=637   freq[39]=637
freq[40]=637   freq[41]=637   freq[42]=637   freq[43]=637   freq[44]=637   freq[45]=637   freq[46]=637   freq[47]=637
freq[48]=637   freq[49]=637   freq[50]=637   freq[51]=637   freq[52]=637   freq[53]=637   freq[54]=637   freq[55]=637
freq[56]=637   freq[57]=637   freq[58]=637   freq[59]=637   freq[60]=637   freq[61]=637   freq[62]=637

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26037
last_nonce_num:28618
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912   asic[01]=912   asic[02]=912   asic[03]=912   asic[04]=912   asic[05]=912   asic[06]=912   asic[07]=912
asic[08]=912   asic[09]=912   asic[10]=912   asic[11]=912   asic[12]=912   asic[13]=912   asic[14]=912   asic[15]=912
asic[16]=912   asic[17]=912   asic[18]=912   asic[19]=912   asic[20]=912   asic[21]=912   asic[22]=912   asic[23]=912
asic[24]=912   asic[25]=912   asic[26]=912   asic[27]=912   asic[28]=912   asic[29]=912   asic[30]=912   asic[31]=912
asic[32]=912   asic[33]=912   asic[34]=912   asic[35]=912   asic[36]=912   asic[37]=912   asic[38]=912   asic[39]=912
asic[40]=912   asic[41]=912   asic[42]=912   asic[43]=912   asic[44]=912   asic[45]=912   asic[46]=912   asic[47]=912
asic[48]=912   asic[49]=912   asic[50]=912   asic[51]=912   asic[52]=912   asic[53]=912   asic[54]=912   asic[55]=912
asic[56]=912   asic[57]=912   asic[58]=912   asic[59]=912   asic[60]=912   asic[61]=912   asic[62]=912

Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

freq[00]=656   freq[01]=656   freq[02]=656   freq[03]=656   freq[04]=656   freq[05]=656   freq[06]=656   freq[07]=656
freq[08]=656   freq[09]=675   freq[10]=656   freq[11]=656   freq[12]=656   freq[13]=656   freq[14]=675   freq[15]=656
freq[16]=656   freq[17]=656   freq[18]=656   freq[19]=656   freq[20]=656   freq[21]=656   freq[22]=656   freq[23]=656
freq[24]=656   freq[25]=656   freq[26]=656   freq[27]=656   freq[28]=656   freq[29]=656   freq[30]=656   freq[31]=656
freq[32]=656   freq[33]=656   freq[34]=656   freq[35]=656   freq[36]=656   freq[37]=656   freq[38]=656   freq[39]=656
freq[40]=656   freq[41]=656   freq[42]=656   freq[43]=656   freq[44]=656   freq[45]=656   freq[46]=656   freq[47]=656
freq[48]=656   freq[49]=656   freq[50]=656   freq[51]=656   freq[52]=656   freq[53]=656   freq[54]=656   freq[55]=656
freq[56]=656   freq[57]=656   freq[58]=656   freq[59]=662   freq[60]=662   freq[61]=662   freq[62]=662

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26558
last_nonce_num:28641
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=907   asic[01]=909   asic[02]=908   asic[03]=909   asic[04]=904   asic[05]=905   asic[06]=909   asic[07]=909
asic[08]=909   asic[09]=905   asic[10]=908   asic[11]=903   asic[12]=910   asic[13]=910   asic[14]=909   asic[15]=907
asic[16]=905   asic[17]=910   asic[18]=909   asic[19]=907   asic[20]=910   asic[21]=910   asic[22]=909   asic[23]=908
asic[24]=910   asic[25]=907   asic[26]=909   asic[27]=907   asic[28]=910   asic[29]=911   asic[30]=908   asic[31]=908
asic[32]=910   asic[33]=907   asic[34]=906   asic[35]=908   asic[36]=905   asic[37]=909   asic[38]=908   asic[39]=907
asic[40]=848   asic[41]=907   asic[42]=911   asic[43]=902   asic[44]=909   asic[45]=909   asic[46]=908   asic[47]=905
asic[48]=909   asic[49]=908   asic[50]=910   asic[51]=906   asic[52]=907   asic[53]=906   asic[54]=902   asic[55]=906
asic[56]=909   asic[57]=905   asic[58]=905   asic[59]=909   asic[60]=910   asic[61]=908   asic[62]=906

Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=907
core[002]=3

asic[01]=909
core[080]=5

asic[02]=908
core[033]=4

asic[03]=909
core[078]=5

asic[04]=904
core[018]=0

asic[05]=905
core[044]=5 core[073]=6 core[102]=6

asic[06]=909
core[028]=5

asic[07]=909
core[046]=5

asic[08]=909
core[086]=5

asic[09]=905
core[042]=1

asic[10]=908
core[074]=4

asic[11]=903
core[059]=6 core[062]=1

asic[12]=910
core[009]=6

asic[13]=910
core[081]=6

asic[14]=909
core[045]=5

asic[15]=907
core[028]=3

asic[16]=905
core[105]=5 core[110]=4

asic[17]=910
core[013]=6

asic[18]=909
core[112]=5

asic[19]=907
core[031]=3

asic[20]=910
core[001]=6

asic[21]=910
core[041]=6

asic[22]=909
core[046]=5

asic[23]=908
core[055]=4

asic[24]=910
core[080]=6

asic[25]=907
core[007]=3

asic[26]=909
core[028]=5

asic[27]=907
core[097]=3

asic[28]=910
core[080]=6

asic[29]=911
core[103]=7

asic[30]=908
core[051]=4

asic[31]=908
core[004]=4

asic[32]=910
core[101]=6

asic[33]=907
core[106]=3

asic[34]=906
core[051]=2

asic[35]=908
core[088]=4

asic[36]=905
core[099]=1

asic[37]=909
core[045]=5

asic[38]=908
core[003]=4

asic[39]=907
core[105]=3

asic[40]=848
core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0

asic[41]=907
core[042]=3

asic[42]=911
core[042]=7

asic[43]=902
core[010]=2 core[042]=4

asic[44]=909
core[098]=5

asic[45]=909
core[101]=5

asic[46]=908
core[021]=4

asic[47]=905
core[013]=3 core[028]=6

asic[48]=909
core[074]=5

asic[49]=908
core[077]=4

asic[50]=910
core[086]=6

asic[51]=906
core[047]=2

asic[52]=907
core[063]=3

asic[53]=906
core[067]=2

asic[54]=902
core[011]=3 core[047]=6 core[078]=5

asic[55]=906
core[106]=2

asic[56]=909
core[074]=5

asic[57]=905
core[047]=1

asic[58]=905
core[002]=1

asic[59]=909
core[074]=5

asic[60]=910
core[104]=6

asic[61]=908
core[106]=4

asic[62]=906
core[043]=6 core[059]=4

freq[00]=637   freq[01]=637   freq[02]=637   freq[03]=637   freq[04]=637   freq[05]=637   freq[06]=637   freq[07]=637
freq[08]=637   freq[09]=637   freq[10]=637   freq[11]=637   freq[12]=637   freq[13]=637   freq[14]=637   freq[15]=637
freq[16]=637   freq[17]=637   freq[18]=637   freq[19]=637   freq[20]=637   freq[21]=637   freq[22]=637   freq[23]=637
freq[24]=637   freq[25]=637   freq[26]=637   freq[27]=637   freq[28]=637   freq[29]=637   freq[30]=637   freq[31]=637
freq[32]=637   freq[33]=637   freq[34]=637   freq[35]=637   freq[36]=637   freq[37]=637   freq[38]=637   freq[39]=637
freq[40]=637   freq[41]=637   freq[42]=637   freq[43]=637   freq[44]=637   freq[45]=637   freq[46]=637   freq[47]=637
freq[48]=637   freq[49]=637   freq[50]=637   freq[51]=637   freq[52]=637   freq[53]=637   freq[54]=637   freq[55]=637
freq[56]=637   freq[57]=637   freq[58]=637   freq[59]=637   freq[60]=637   freq[61]=637   freq[62]=637

total valid nonce number:57124
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25929
last_nonce_num:35753
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912   asic[01]=912   asic[02]=912   asic[03]=912   asic[04]=912   asic[05]=912   asic[06]=912   asic[07]=912
asic[08]=912   asic[09]=912   asic[10]=912   asic[11]=912   asic[12]=912   asic[13]=912   asic[14]=912   asic[15]=912
asic[16]=912   asic[17]=912   asic[18]=912   asic[19]=912   asic[20]=912   asic[21]=912   asic[22]=912   asic[23]=912
asic[24]=912   asic[25]=912   asic[26]=912   asic[27]=912   asic[28]=912   asic[29]=912   asic[30]=912   asic[31]=912
asic[32]=912   asic[33]=912   asic[34]=912   asic[35]=912   asic[36]=912   asic[37]=912   asic[38]=912   asic[39]=912
asic[40]=912   asic[41]=912   asic[42]=912   asic[43]=912   asic[44]=912   asic[45]=912   asic[46]=912   asic[47]=912
asic[48]=912   asic[49]=912   asic[50]=912   asic[51]=912   asic[52]=912   asic[53]=912   asic[54]=912   asic[55]=912
asic[56]=912   asic[57]=912   asic[58]=912   asic[59]=912   asic[60]=912   asic[61]=912   asic[62]=912

Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

freq[00]=631   freq[01]=631   freq[02]=631   freq[03]=631   freq[04]=631   freq[05]=631   freq[06]=631   freq[07]=631
freq[08]=631   freq[09]=631   freq[10]=631   freq[11]=631   freq[12]=631   freq[13]=631   freq[14]=637   freq[15]=637
freq[16]=637   freq[17]=637   freq[18]=637   freq[19]=637   freq[20]=637   freq[21]=637   freq[22]=637   freq[23]=637
freq[24]=637   freq[25]=637   freq[26]=637   freq[27]=637   freq[28]=637   freq[29]=637   freq[30]=637   freq[31]=637
freq[32]=637   freq[33]=637   freq[34]=637   freq[35]=637   freq[36]=637   freq[37]=637   freq[38]=637   freq[39]=637
freq[40]=637   freq[41]=637   freq[42]=637   freq[43]=637   freq[44]=637   freq[45]=637   freq[46]=637   freq[47]=637
freq[48]=637   freq[49]=637   freq[50]=637   freq[51]=637   freq[52]=637   freq[53]=637   freq[54]=637   freq[55]=637
freq[56]=637   freq[57]=637   freq[58]=637   freq[59]=637   freq[60]=637   freq[61]=637   freq[62]=637

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:47415
last_nonce_num:24557
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912   asic[01]=912   asic[02]=912   asic[03]=912   asic[04]=912   asic[05]=912   asic[06]=912   asic[07]=912
asic[08]=912   asic[09]=912   asic[10]=912   asic[11]=912   asic[12]=912   asic[13]=912   asic[14]=912   asic[15]=912
asic[16]=912   asic[17]=912   asic[18]=912   asic[19]=912   asic[20]=912   asic[21]=912   asic[22]=912   asic[23]=912
asic[24]=912   asic[25]=912   asic[26]=912   asic[27]=912   asic[28]=912   asic[29]=912   asic[30]=912   asic[31]=912
asic[32]=912   asic[33]=912   asic[34]=912   asic[35]=912   asic[36]=912   asic[37]=912   asic[38]=912   asic[39]=912
asic[40]=912   asic[41]=912   asic[42]=912   asic[43]=912   asic[44]=912   asic[45]=912   asic[46]=912   asic[47]=912
asic[48]=912   asic[49]=912   asic[50]=912   asic[51]=912   asic[52]=912   asic[53]=912   asic[54]=912   asic[55]=912
asic[56]=912   asic[57]=912   asic[58]=912   asic[59]=912   asic[60]=912   asic[61]=912   asic[62]=912

Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

freq[00]=656   freq[01]=656   freq[02]=656   freq[03]=656   freq[04]=656   freq[05]=656   freq[06]=656   freq[07]=656
freq[08]=656   freq[09]=675   freq[10]=656   freq[11]=656   freq[12]=656   freq[13]=656   freq[14]=675   freq[15]=656
freq[16]=656   freq[17]=656   freq[18]=656   freq[19]=656   freq[20]=656   freq[21]=656   freq[22]=656   freq[23]=656
freq[24]=656   freq[25]=656   freq[26]=656   freq[27]=656   freq[28]=656   freq[29]=656   freq[30]=656   freq[31]=656
freq[32]=656   freq[33]=656   freq[34]=656   freq[35]=656   freq[36]=656   freq[37]=656   freq[38]=656   freq[39]=656
freq[40]=656   freq[41]=656   freq[42]=656   freq[43]=656   freq[44]=656   freq[45]=656   freq[46]=656   freq[47]=656
freq[48]=656   freq[49]=656   freq[50]=656   freq[51]=656   freq[52]=656   freq[53]=656   freq[54]=656   freq[55]=656
freq[56]=656   freq[57]=656   freq[58]=656   freq[59]=662   freq[60]=662   freq[61]=662   freq[62]=662

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:47926
last_nonce_num:24565
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=907   asic[01]=909   asic[02]=908   asic[03]=909   asic[04]=904   asic[05]=905   asic[06]=909   asic[07]=909
asic[08]=909   asic[09]=905   asic[10]=908   asic[11]=903   asic[12]=910   asic[13]=910   asic[14]=909   asic[15]=907
asic[16]=905   asic[17]=910   asic[18]=909   asic[19]=907   asic[20]=910   asic[21]=910   asic[22]=909   asic[23]=908
asic[24]=910   asic[25]=907   asic[26]=909   asic[27]=907   asic[28]=910   asic[29]=911   asic[30]=908   asic[31]=908
asic[32]=910   asic[33]=907   asic[34]=906   asic[35]=908   asic[36]=905   asic[37]=909   asic[38]=908   asic[39]=907
asic[40]=848   asic[41]=907   asic[42]=911   asic[43]=902   asic[44]=909   asic[45]=909   asic[46]=908   asic[47]=905
asic[48]=909   asic[49]=908   asic[50]=910   asic[51]=906   asic[52]=907   asic[53]=906   asic[54]=902   asic[55]=906
asic[56]=909   asic[57]=905   asic[58]=905   asic[59]=909   asic[60]=910   asic[61]=908   asic[62]=906

Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=907
core[002]=3

asic[01]=909
core[080]=5

asic[02]=908
core[033]=4

asic[03]=909
core[078]=5

asic[04]=904
core[018]=0

asic[05]=905
core[044]=5 core[073]=6 core[102]=6

asic[06]=909
core[028]=5

asic[07]=909
core[046]=5

asic[08]=909
core[086]=5

asic[09]=905
core[042]=1

asic[10]=908
core[074]=4

asic[11]=903
core[059]=6 core[062]=1

asic[12]=910
core[009]=6

asic[13]=910
core[081]=6

asic[14]=909
core[045]=5

asic[15]=907
core[028]=3

asic[16]=905
core[105]=5 core[110]=4

asic[17]=910
core[013]=6

asic[18]=909
core[112]=5

asic[19]=907
core[031]=3

asic[20]=910
core[001]=6

asic[21]=910
core[041]=6

asic[22]=909
core[046]=5

asic[23]=908
core[055]=4

asic[24]=910
core[080]=6

asic[25]=907
core[007]=3

asic[26]=909
core[028]=5

asic[27]=907
core[097]=3

asic[28]=910
core[080]=6

asic[29]=911
core[103]=7

asic[30]=908
core[051]=4

asic[31]=908
core[004]=4

asic[32]=910
core[101]=6

asic[33]=907
core[106]=3

asic[34]=906
core[051]=2

asic[35]=908
core[088]=4

asic[36]=905
core[099]=1

asic[37]=909
core[045]=5

asic[38]=908
core[003]=4

asic[39]=907
core[105]=3

asic[40]=848
core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0

asic[41]=907
core[042]=3

asic[42]=911
core[042]=7

asic[43]=902
core[010]=2 core[042]=4

asic[44]=909
core[098]=5

asic[45]=909
core[101]=5

asic[46]=908
core[021]=4

asic[47]=905
core[013]=3 core[028]=6

asic[48]=909
core[074]=5

asic[49]=908
core[077]=4

asic[50]=910
core[086]=6

asic[51]=906
core[047]=2

asic[52]=907
core[063]=3

asic[53]=906
core[067]=2

asic[54]=902
core[011]=3 core[047]=6 core[078]=5

asic[55]=906
core[106]=2

asic[56]=909
core[074]=5

asic[57]=905
core[047]=1

asic[58]=905
core[002]=1

asic[59]=909
core[074]=5

asic[60]=910
core[104]=6

asic[61]=908
core[106]=4

asic[62]=906
core[043]=6 core[059]=4

freq[00]=637   freq[01]=637   freq[02]=637   freq[03]=637   freq[04]=637   freq[05]=637   freq[06]=637   freq[07]=637
freq[08]=637   freq[09]=637   freq[10]=637   freq[11]=637   freq[12]=637   freq[13]=637   freq[14]=637   freq[15]=637
freq[16]=637   freq[17]=637   freq[18]=637   freq[19]=637   freq[20]=637   freq[21]=637   freq[22]=637   freq[23]=637
freq[24]=637   freq[25]=637   freq[26]=637   freq[27]=637   freq[28]=637   freq[29]=637   freq[30]=637   freq[31]=637
freq[32]=637   freq[33]=637   freq[34]=637   freq[35]=637   freq[36]=637   freq[37]=637   freq[38]=637   freq[39]=637
freq[40]=637   freq[41]=637   freq[42]=637   freq[43]=637   freq[44]=637   freq[45]=637   freq[46]=637   freq[47]=637
freq[48]=637   freq[49]=637   freq[50]=637   freq[51]=637   freq[52]=637   freq[53]=637   freq[54]=637   freq[55]=637
freq[56]=637   freq[57]=637   freq[58]=637   freq[59]=637   freq[60]=637   freq[61]=637   freq[62]=637

total valid nonce number:57124
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:68661
last_nonce_num:40147
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=429 total_tv_end_sys=430
restartNum = 2 , auto-reinit enabled...
PCB temp>60 will set the voltage limited on chain[5], change voltage=890
PCB temp>60 now set pic voltage=91 on chain[5]
PCB temp>60 will set the voltage limited on chain[6], change voltage=890
PCB temp>60 now set pic voltage=91 on chain[6]
PCB temp>60 will set the voltage limited on chain[7], change voltage=890
PCB temp>60 now set pic voltage=91 on chain[7]
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=184.549 Asic[02]=201.326 Asic[03]=218.103 Asic[04]=201.326 Asic[05]=184.549 Asic[06]=184.549 Asic[07]=201.326 Asic[08]=201.326
Asic[09]=184.549 Asic[10]=201.326 Asic[11]=184.549 Asic[12]=201.326 Asic[13]=184.549 Asic[14]=201.326 Asic[15]=218.103 Asic[16]=184.549
Asic[17]=184.549 Asic[18]=184.549 Asic[19]=201.326 Asic[20]=184.549 Asic[21]=184.549 Asic[22]=201.326 Asic[23]=184.549 Asic[24]=201.326
Asic[25]=167.772 Asic[26]=218.103 Asic[27]=218.103 Asic[28]=167.772 Asic[29]=184.549 Asic[30]=167.772 Asic[31]=184.549 Asic[32]=201.326
Asic[33]=201.326 Asic[34]=184.549 Asic[35]=218.103 Asic[36]=184.549 Asic[37]=184.549 Asic[38]=184.549 Asic[39]=184.549 Asic[40]=201.326
Asic[41]=184.549 Asic[42]=184.549 Asic[43]=184.549 Asic[44]=218.103 Asic[45]=184.549 Asic[46]=184.549 Asic[47]=201.326 Asic[48]=218.103
Asic[49]=201.326 Asic[50]=201.326 Asic[51]=184.549 Asic[52]=201.326 Asic[53]=201.326 Asic[54]=184.549 Asic[55]=201.326 Asic[56]=184.549
Asic[57]=201.326 Asic[58]=184.549 Asic[59]=201.326 Asic[60]=167.772 Asic[61]=184.549 Asic[62]=184.549 Asic[63]=201.326

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=167.772 Asic[02]=167.772 Asic[03]=167.772 Asic[04]=167.772 Asic[05]=167.772 Asic[06]=150.994 Asic[07]=167.772 Asic[08]=167.772
Asic[09]=184.549 Asic[10]=50.3310 Asic[11]=184.549 Asic[12]=167.772 Asic[13]=184.549 Asic[14]=167.772 Asic[15]=50.3310 Asic[16]=184.549
Asic[17]=167.772 Asic[18]=167.772 Asic[19]=167.772 Asic[20]=167.772 Asic[21]=167.772 Asic[22]=184.549 Asic[23]=167.772 Asic[24]=167.772
Asic[25]=150.994 Asic[26]=150.994 Asic[27]=167.772 Asic[28]=184.549 Asic[29]=184.549 Asic[30]=167.772 Asic[31]=150.994 Asic[32]=184.549
Asic[33]=150.994 Asic[34]=150.994 Asic[35]=150.994 Asic[36]=167.772 Asic[37]=167.772 Asic[38]=150.994 Asic[39]=150.994 Asic[40]=167.772
Asic[41]=167.772 Asic[42]=167.772 Asic[43]=184.549 Asic[44]=167.772 Asic[45]=167.772 Asic[46]=167.772 Asic[47]=167.772 Asic[48]=167.772
Asic[49]=167.772 Asic[50]=167.772 Asic[51]=167.772 Asic[52]=167.772 Asic[53]=184.549 Asic[54]=184.549 Asic[55]=150.994 Asic[56]=167.772
Asic[57]=184.549 Asic[58]=150.994 Asic[59]=184.549 Asic[60]=167.772 Asic[61]=184.549 Asic[62]=167.772 Asic[63]=167.772

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=117.440 Asic[02]=150.994 Asic[03]=117.440 Asic[04]=117.440 Asic[05]=134.217 Asic[06]=134.217 Asic[07]=150.994 Asic[08]=134.217
Asic[09]=134.217 Asic[10]=150.994 Asic[11]=134.217 Asic[12]=150.994 Asic[13]=150.994 Asic[14]=150.994 Asic[15]=150.994 Asic[16]=134.217
Asic[17]=167.772 Asic[18]=150.994 Asic[19]=134.217 Asic[20]=134.217 Asic[21]=150.994 Asic[22]=150.994 Asic[23]=117.440 Asic[24]=134.217
Asic[25]=150.994 Asic[26]=150.994 Asic[27]=134.217 Asic[28]=150.994 Asic[29]=134.217 Asic[30]=134.217 Asic[31]=134.217 Asic[32]=134.217
Asic[33]=134.217 Asic[34]=150.994 Asic[35]=117.440 Asic[36]=134.217 Asic[37]=134.217 Asic[38]=134.217 Asic[39]=150.994 Asic[40]=150.994
Asic[41]=134.217 Asic[42]=150.994 Asic[43]=150.994 Asic[44]=150.994 Asic[45]=134.217 Asic[46]=117.440 Asic[47]=150.994 Asic[48]=134.217
Asic[49]=150.994 Asic[50]=150.994 Asic[51]=134.217 Asic[52]=134.217 Asic[53]=150.994 Asic[54]=134.217 Asic[55]=117.440 Asic[56]=134.217
Asic[57]=150.994 Asic[58]=150.994 Asic[59]=134.217 Asic[60]=117.440 Asic[61]=134.217 Asic[62]=134.217 Asic[63]=150.994
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[01]=184.549000
Asic[02]=201.326000
Asic[03]=218.103000
Asic[04]=201.326000
Asic[05]=184.549000
Asic[06]=184.549000
Asic[07]=201.326000
Asic[08]=201.326000
Asic[09]=184.549000
Asic[10]=201.326000
Asic[11]=184.549000
Asic[12]=201.326000
Asic[13]=184.549000
Asic[14]=201.326000
Asic[15]=218.103000
Asic[16]=184.549000
Asic[17]=184.549000
Asic[18]=184.549000
Asic[19]=201.326000
Asic[20]=184.549000
Asic[21]=184.549000
Asic[22]=201.326000
Asic[23]=184.549000
Asic[24]=201.326000
Asic[25]=167.772000
Asic[26]=218.103000
Asic[27]=218.103000
Asic[28]=167.772000
Asic[29]=184.549000
Asic[30]=167.772000
Asic[31]=184.549000
Asic[32]=201.326000
Asic[33]=201.326000
Asic[34]=184.549000
Asic[35]=218.103000
Asic[36]=184.549000
Asic[37]=184.549000
Asic[38]=184.549000
Asic[39]=184.549000
Asic[40]=201.326000
Asic[41]=184.549000
Asic[42]=184.549000
Asic[43]=184.549000
Asic[44]=218.103000
Asic[45]=184.549000
Asic[46]=184.549000
Asic[47]=201.326000
Asic[48]=218.103000
Asic[49]=201.326000
Asic[50]=201.326000
Asic[51]=184.549000
Asic[52]=201.326000
Asic[53]=201.326000
Asic[54]=184.549000
Asic[55]=201.326000
Asic[56]=184.549000
Asic[57]=201.326000
Asic[58]=184.549000
Asic[59]=201.326000
Asic[60]=167.772000
Asic[61]=184.549000
Asic[62]=184.549000
Asic[63]=201.326000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[01]=167.772000
Asic[02]=167.772000
Asic[03]=167.772000
Asic[04]=167.772000
Asic[05]=167.772000
Asic[06]=150.994000
Asic[07]=167.772000
Asic[08]=167.772000
Asic[09]=184.549000
Asic[11]=184.549000
Asic[12]=167.772000
Asic[13]=184.549000
Asic[14]=167.772000
Asic[16]=184.549000
Asic[17]=167.772000
Asic[18]=167.772000
Asic[19]=167.772000
Asic[20]=167.772000
Asic[21]=167.772000
Asic[22]=184.549000
Asic[23]=167.772000
Asic[24]=167.772000
Asic[25]=150.994000
Asic[26]=150.994000
Asic[27]=167.772000
Asic[28]=184.549000
Asic[29]=184.549000
Asic[30]=167.772000
Asic[31]=150.994000
Asic[32]=184.549000
Asic[33]=150.994000
Asic[34]=150.994000
Asic[35]=150.994000
Asic[36]=167.772000
Asic[37]=167.772000
Asic[38]=150.994000
Asic[39]=150.994000
Asic[40]=167.772000
Asic[41]=167.772000
Asic[42]=167.772000
Asic[43]=184.549000
Asic[44]=167.772000
Asic[45]=167.772000
Asic[46]=167.772000
Asic[47]=167.772000
Asic[48]=167.772000
Asic[49]=167.772000
Asic[50]=167.772000
Asic[51]=167.772000
Asic[52]=167.772000
Asic[53]=184.549000
Asic[54]=184.549000
Asic[55]=150.994000
Asic[56]=167.772000
Asic[57]=184.549000
Asic[58]=150.994000
Asic[59]=184.549000
Asic[60]=167.772000
Asic[61]=184.549000
Asic[62]=167.772000
Asic[63]=167.772000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[01]=117.440000
Asic[02]=150.994000
Asic[03]=117.440000
Asic[04]=117.440000
Asic[05]=134.217000
Asic[06]=134.217000
Asic[07]=150.994000
Asic[08]=134.217000
Asic[09]=134.217000
Asic[10]=150.994000
Asic[11]=134.217000
Asic[12]=150.994000
Asic[13]=150.994000
Asic[14]=150.994000
Asic[15]=150.994000
Asic[16]=134.217000
Asic[17]=167.772000
Asic[18]=150.994000
Asic[19]=134.217000
Asic[20]=134.217000
Asic[21]=150.994000
Asic[22]=150.994000
Asic[23]=117.440000
Asic[24]=134.217000
Asic[25]=150.994000
Asic[26]=150.994000
Asic[27]=134.217000
Asic[28]=150.994000
Asic[29]=134.217000
Asic[30]=134.217000
Asic[31]=134.217000
Asic[32]=134.217000
Asic[33]=134.217000
Asic[34]=150.994000
Asic[35]=117.440000
Asic[36]=134.217000
Asic[37]=134.217000
Asic[38]=134.217000
Asic[39]=150.994000
Asic[40]=150.994000
Asic[41]=134.217000
Asic[42]=150.994000
Asic[43]=150.994000
Asic[44]=150.994000
Asic[45]=134.217000
Asic[46]=117.440000
Asic[47]=150.994000
Asic[48]=134.217000
Asic[49]=150.994000
Asic[50]=150.994000
Asic[51]=134.217000
Asic[52]=134.217000
Asic[53]=150.994000
Asic[54]=134.217000
Asic[55]=117.440000
Asic[56]=134.217000
Asic[57]=150.994000
Asic[58]=150.994000
Asic[59]=134.217000
Asic[60]=117.440000
Asic[61]=134.217000
Asic[62]=134.217000
Asic[63]=150.994000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=30
Chain[5] Chip[62] local Temp=52
Chain[5] Chip[62] middle Temp=66
Special fix Chain[5] Chip[62] middle Temp = 67
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=29
Chain[6] Chip[62] local Temp=52
Chain[6] Chip[62] middle Temp=63
Special fix Chain[6] Chip[62] middle Temp = 67
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=57
Chain[7] Chip[62] middle Temp=71
Special fix Chain[7] Chip[62] middle Temp = 72
Done read temp on Chain[7]
set FAN speed according to: temp_highest=57 temp_top1[PWM_T]=57 temp_top1[TEMP_POS_LOCAL]=57 temp_change=-1 fix_fan_steps=0
FAN PWM: 66
read_temp_func Done!
CRC error counter=0

semej · 13 июн 2018, 17:14

@Gorby200 с вентилятором что? Отображает скорость 30600 - перемычка стоит? Если нет, подкиньте новые. И контрольку можно подкинуть.

Gorby200 · 13 июн 2018, 17:20

Вентиль стоит стационарный - вытяжка, поэтому перемычка. Со всеми s7-s9 асиками так работали. Но их мало было, поэтому опыта не хватает для ответов на все вопросы. Дело не в вентиляторе.

Пробовал все прошивки, от стационарных до экспериментальных. Сейчас стоит, работает. Смотрю админку в фоне. Иногда платы уходят в космос (20% случаев) с хэшрейтом несколько десятков тысяч, 80% - дропается хэшрейт. Иногда синхронно падают (взлетают), иногда по отдельности.
Это на экспериментально прошивке.

Spoiler

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000311] ps7-ttc #0 at df804000, irq=43
[ 0.000622] Console: colour dummy device 80x30
[ 0.000654] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040210] pid_max: default: 32768 minimum: 301
[ 0.040430] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040450] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042613] CPU: Testing write buffer coherency: ok
[ 0.042959] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043020] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043243] L310 cache controller enabled
[ 0.043262] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121044] CPU1: Booted secondary processor
[ 0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210362] Brought up 2 CPUs
[ 0.210381] SMP: Total of 2 processors activated.
[ 0.210389] CPU: All CPU(s) started in SVC mode.
[ 0.211062] devtmpfs: initialized
[ 0.213473] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214728] regulator-dummy: no parameters
[ 0.223263] NET: Registered protocol family 16
[ 0.225472] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.227797] cpuidle: using governor ladder
[ 0.227811] cpuidle: using governor menu
[ 0.235405] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.236965] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.236979] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237100] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259202] bio: create slab <bio-0> at 0
[ 0.261478] vgaarb: loaded
[ 0.262222] SCSI subsystem initialized
[ 0.263133] usbcore: registered new interface driver usbfs
[ 0.263308] usbcore: registered new interface driver hub
[ 0.263537] usbcore: registered new device driver usb
[ 0.264063] media: Linux media interface: v0.10
[ 0.264221] Linux video capture interface: v2.00
[ 0.264462] pps_core: LinuxPPS API ver. 1 registered
[ 0.264474] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.264603] PTP clock support registered
[ 0.264969] EDAC MC: Ver: 3.0.0
[ 0.266022] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268999] DMA-API: preallocated 4096 debug entries
[ 0.269013] DMA-API: debugging enabled by kernel config
[ 0.269103] Switched to clocksource arm_global_timer
[ 0.289762] NET: Registered protocol family 2
[ 0.290441] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290500] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290585] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290631] TCP: reno registered
[ 0.290650] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290684] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290933] NET: Registered protocol family 1
[ 0.291276] RPC: Registered named UNIX socket transport module.
[ 0.291289] RPC: Registered udp transport module.
[ 0.291297] RPC: Registered tcp transport module.
[ 0.291306] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291319] PCI: CLS 0 bytes, default 64
[ 0.291777] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293845] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296044] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296242] msgmni has been set to 967
[ 0.297053] io scheduler noop registered
[ 0.297067] io scheduler deadline registered
[ 0.297106] io scheduler cfq registered (default)
[ 0.309544] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.309565] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.435385] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003375] console [ttyPS0] enabled
[ 1.007683] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.015336] [drm] Initialized drm 1.1.0 20060810
[ 1.032680] brd: module loaded
[ 1.042140] loop: module loaded
[ 1.051905] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057659] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065815] libphy: XEMACPS mii bus: probed
[ 1.070404] ------------- phy_id = 0x3625e62
[ 1.075165] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.083915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.090619] ehci-pci: EHCI PCI platform driver
[ 1.097834] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.104670] usbcore: registered new interface driver usb-storage
[ 1.111568] mousedev: PS/2 mouse device common for all mice
[ 1.117671] i2c /dev entries driver
[ 1.124660] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.130196] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.136087] Xilinx Zynq CpuIdle Driver started
[ 1.141015] sdhci: Secure Digital Host Controller Interface driver
[ 1.147106] sdhci: Copyright(c) Pierre Ossman
[ 1.151515] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.158253] mmc0: no vqmmc regulator found
[ 1.162295] mmc0: no vmmc regulator found
[ 1.199119] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207806] usbcore: registered new interface driver usbhid
[ 1.213320] usbhid: USB HID core driver
[ 1.218040] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224330] nand: Micron MT29F2G08ABAEAWP
[ 1.228302] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234249] Bad block table found at page 131008, version 0x01
[ 1.240462] Bad block table found at page 130944, version 0x01
[ 1.246514] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252279] Creating 3 MTD partitions on "pl353-nand":
[ 1.257384] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265487] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272815] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281840] TCP: cubic registered
[ 1.285080] NET: Registered protocol family 17
[ 1.289832] Registering SWP/SWPB emulation handler
[ 1.295740] regulator-dummy: disabling
[ 1.300123] UBI: attaching mtd1 to ubi0
[ 1.682599] UBI: scanning is finished
[ 1.694496] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.701581] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.708323] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.715026] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.721884] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.727852] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.734984] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1076177510
[ 1.744015] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.753233] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.753239] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.757262] ALSA device list:
[ 1.757266] No soundcards found.
[ 1.774088] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.922802] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.928730] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.937863] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.947746] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.952786] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2E282728-7B75-414A-9F50-D8739994A7EE, small LPT model
[ 1.971968] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 1.981843] devtmpfs: mounted
[ 1.984957] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 3.158677] random: dd urandom read with 0 bits of entropy available
[ 3.779113]
[ 3.779113] bcm54xx_config_init
[ 4.389130]
[ 4.389130] bcm54xx_config_init
[ 7.389982] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.396080] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 19.968007] In axi fpga driver!
[ 19.971122] request_mem_region OK!
[ 19.974469] AXI fpga dev virtual address is 0xdf9fc000
[ 19.979653] *base_vir_addr = 0x8c510
[ 19.995154] In fpga mem driver!
[ 19.998230] request_mem_region OK!
[ 20.001844] fpga mem virtual address is 0xe2000000
[ 20.749132]
[ 20.749132] bcm54xx_config_init
[ 21.389144]
[ 21.389144] bcm54xx_config_init
[ 24.389965] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 24.395992] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 327.357140] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=650 Chain[5] voltage_pic=57 value=910
Fix freq=650 Chain[6] voltage_pic=57 value=910
Fix freq=650 Chain[7] voltage_pic=57 value=910
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=650M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=650M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=650M
Chain[J8] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:700
Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 Asic[ 8]:700
Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 Asic[16]:700
Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 Asic[24]:700
Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 Asic[32]:700
Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 Asic[40]:700
Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 Asic[48]:700
Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 Asic[56]:700
Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700
Chain:5 max freq=700
Chain:5 min freq=700

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:700
Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 Asic[ 8]:700
Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 Asic[16]:700
Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 Asic[24]:700
Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 Asic[32]:700
Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 Asic[40]:700
Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 Asic[48]:700
Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 Asic[56]:700
Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700
Chain:6 max freq=700
Chain:6 min freq=700

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:700
Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 Asic[ 8]:700
Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 Asic[16]:700
Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 Asic[24]:700
Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 Asic[32]:700
Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 Asic[40]:700
Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 Asic[48]:700
Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 Asic[56]:700
Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700
Chain:7 max freq=700
Chain:7 min freq=700

max freq = 700
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:22 remote:24 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:22 remote:24 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:23 remote:25 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J7] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
New offset Chain[6] chip[244] local:23 remote:25 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:24 remote:26 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
Chain[J8] chip[136] use PIC middle temp offset=28 typeID=3f
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:24 remote:26 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
Chain[J6] set working voltage=910 [57]
Chain[J7] set working voltage=910 [57]
Chain[J8] set working voltage=910 [57]
setStartTimePoint total_tv_start_sys=66 total_tv_end_sys=67
restartNum = 2 , auto-reinit enabled...
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=71.9070 Asic[02]=83.5670 Asic[03]=75.6820 Asic[04]=76.8220 Asic[05]=79.3050 Asic[06]=78.1650 Asic[07]=74.3730 Asic[08]=77.9130
Asic[09]=79.7250 Asic[10]=74.3900 Asic[11]=82.2750 Asic[12]=77.9300 Asic[13]=82.1740 Asic[14]=82.2410 Asic[15]=80.7150 Asic[16]=79.0030
Asic[17]=82.4760 Asic[18]=84.6240 Asic[19]=79.5070 Asic[20]=83.0130 Asic[21]=82.3920 Asic[22]=77.8790 Asic[23]=77.5100 Asic[24]=72.7790
Asic[25]=79.3050 Asic[26]=80.1610 Asic[27]=82.3250 Asic[28]=78.2320 Asic[29]=80.1780 Asic[30]=83.5160 Asic[31]=79.0370 Asic[32]=80.7310
Asic[33]=76.7220 Asic[34]=74.4230 Asic[35]=75.8490 Asic[36]=78.3490 Asic[37]=80.5300 Asic[38]=79.7920 Asic[39]=76.7890 Asic[40]=78.7520
Asic[41]=80.0600 Asic[42]=79.2050 Asic[43]=76.2350 Asic[44]=77.3930 Asic[45]=80.3120 Asic[46]=79.7750 Asic[47]=84.5230 Asic[48]=79.8090
Asic[49]=84.6570 Asic[50]=78.0140 Asic[51]=78.4830 Asic[52]=85.8820 Asic[53]=83.6170 Asic[54]=77.4770 Asic[55]=75.2790 Asic[56]=75.5640
Asic[57]=82.1070 Asic[58]=81.2010 Asic[59]=73.9870 Asic[60]=77.5610 Asic[61]=83.4160 Asic[62]=77.7450 Asic[63]=80.6810

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=80.1780 Asic[02]=82.1580 Asic[03]=75.7320 Asic[04]=73.1980 Asic[05]=80.0270 Asic[06]=83.5160 Asic[07]=81.3860 Asic[08]=76.1350
Asic[09]=79.9930 Asic[10]=76.2860 Asic[11]=79.4060 Asic[12]=87.8950 Asic[13]=84.2040 Asic[14]=80.2110 Asic[15]=82.7450 Asic[16]=80.7310
Asic[17]=75.1450 Asic[18]=89.2540 Asic[19]=82.0740 Asic[20]=81.2010 Asic[21]=82.5270 Asic[22]=79.6910 Asic[23]=76.7380 Asic[24]=74.3900
Asic[25]=73.7350 Asic[26]=78.3160 Asic[27]=79.5740 Asic[28]=82.5100 Asic[29]=79.5740 Asic[30]=76.5040 Asic[31]=80.3460 Asic[32]=76.3190
Asic[33]=80.8990 Asic[34]=80.8990 Asic[35]=80.3620 Asic[36]=75.9670 Asic[37]=76.9060 Asic[38]=71.4370 Asic[39]=79.5910 Asic[40]=90.0430
Asic[41]=76.3860 Asic[42]=78.6510 Asic[43]=74.7590 Asic[44]=81.0500 Asic[45]=76.9230 Asic[46]=79.4060 Asic[47]=77.6780 Asic[48]=84.9930
Asic[49]=79.9260 Asic[50]=78.6010 Asic[51]=80.3960 Asic[52]=78.6010 Asic[53]=81.2680 Asic[54]=77.3930 Asic[55]=83.5330 Asic[56]=85.2780
Asic[57]=75.6140 Asic[58]=82.5770 Asic[59]=79.9930 Asic[60]=75.8830 Asic[61]=80.7650 Asic[62]=77.2080 Asic[63]=79.4900

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=72.4270 Asic[02]=76.6040 Asic[03]=77.6950 Asic[04]=79.1880 Asic[05]=81.7380 Asic[06]=86.1000 Asic[07]=75.1950 Asic[08]=84.0530
Asic[09]=79.6240 Asic[10]=85.0260 Asic[11]=74.9940 Asic[12]=83.5670 Asic[13]=83.3150 Asic[14]=78.6180 Asic[15]=83.5330 Asic[16]=78.0970
Asic[17]=71.9230 Asic[18]=80.6980 Asic[19]=71.2020 Asic[20]=77.3090 Asic[21]=75.7820 Asic[22]=78.4160 Asic[23]=80.6980 Asic[24]=77.7950
Asic[25]=78.2480 Asic[26]=74.4900 Asic[27]=73.3490 Asic[28]=81.2180 Asic[29]=79.5910 Asic[30]=79.7750 Asic[31]=80.2950 Asic[32]=79.4900
Asic[33]=76.5710 Asic[34]=84.1880 Asic[35]=82.1240 Asic[36]=80.7480 Asic[37]=77.7790 Asic[38]=80.8320 Asic[39]=79.1710 Asic[40]=86.1000
Asic[41]=78.7010 Asic[42]=80.4970 Asic[43]=79.0540 Asic[44]=81.6370 Asic[45]=77.3260 Asic[46]=76.6040 Asic[47]=75.1110 Asic[48]=81.1170
Asic[49]=84.1370 Asic[50]=77.0740 Asic[51]=77.7450 Asic[52]=83.2310 Asic[53]=75.3630 Asic[54]=79.6410 Asic[55]=73.6350 Asic[56]=80.8660
Asic[57]=81.2680 Asic[58]=80.3960 Asic[59]=73.4000 Asic[60]=80.0440 Asic[61]=77.4430 Asic[62]=76.1010 Asic[63]=75.2620
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=53
Chain[5] Chip[62] middle Temp=67
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=53
Chain[6] Chip[62] middle Temp=64
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=58
Chain[7] Chip[62] middle Temp=74
Done read temp on Chain[7]
set FAN speed according to: temp_highest=74 temp_top1[PWM_T]=74 temp_top1[TEMP_POS_LOCAL]=58 temp_change=0 fix_fan_steps=-35
FAN PWM: 0
read_temp_func Done!
CRC error counter=0

semej · 13 июн 2018, 17:27

Так и подумал. А битую плату отключали, чтобы первые две нормально копали без перегруза?

Gorby200 · 13 июн 2018, 17:45

@semej Только что отключил. Те же яйца для оставшихся. Я вот не понимаю, как можно одновременно одинаково все три платы заглючить, если они априори в разных условиях трудятся?

Splinter · 13 июн 2018, 20:16

@Gorby200 В логах все нормально, кроме

Fatal Error: network connection lost!

Gorby200 · 13 июн 2018, 23:35

@Splinter А как нормально, если последняя карта не проходит самотестирование и пишет failed? Такое бывает и на [полу]рабочих машинках?

Splinter · 14 июн 2018, 06:48

@Gorby200 не увидел ваш первый лог. в нем таблицы RT hashrate действительно показывают ерунду. Во втором логе они нормальные. При этом все чипы видятся и температура читается. А RT hashrate в вебке смотреть мало толка - они обновляются раз в 1-2 сек, а в вебку выводится последняя. А про самотестирование, если вы имеете ввиду

Test Patten on chain[7]: FAILED!

то ничего удивительного с такой обширной таблицей плохих ядер. Летать она конечно не будет, но работать вполне может.

Тем более с такой платой ставить 700 МГц это чересчур, родная частота у нее 637 МГц.

Вы сначала с

Fatal Error: network connection lost!

разберитесь.

И с такими симптомами по логу из вебки мало что можно диагностировать.

Plazma · 14 июн 2018, 07:12

Может кто залить прошивку старее чем 2.23 версии? 2.20 например? надо кое что протестировать.

Splinter · 14 июн 2018, 07:23

@Gorby200 коллеги подсказывают, что наблюдали такую проблему в 2-х случаях. Блокировки пулов и подыхающий (откровенная подделка с низкой мощностью и т.п.) блок питания. Проверьте на других пулах, замените БП, в край и контрольку подкиньте исправную.

Gorby200 · 14 июн 2018, 07:51

@Splinter Спасибо за помощь! Но блоки питания все рабочие, менял в первую очередь: использовал муравей и "лыжу" HP 2450 ватт. То же самое. На стандартных пулах пробовал майнить, на своих и на пулах человека. То же самое. Рядом стоят асики и работают на этих пулах прекрасно. Подключены к одному роутеру. Кабель мой. Работал раньше прекрасно. Сегодня обожму новый для проверки. Остальные короткие - не дотягиваются к рабочему столу с вытяжкой. На второй, 100% исправной контрольке (другие асики работают с ней прекрасно), та же ситуация. Если сейчас с проводами не разберусь, то буду отключать рабочие асики и поплатно тестировать. Но что за бредовая ситуация!

PS За ночь набросало по двум платам под сотню тысяч HW ошибок. Но, думаю, это из-за перезагрузов постоянных. Так нет ошибок при работе. И в логах при софтовой перезагрузке пишет теперь "CRC error = 1037" или как-то так.

Какой лог еще снять, чтобы вам показать?

Network connection lost, мне кажется, пишет глюкавая экспериментальная прошивка. На других такого не наблюдалось. Прошил, чтобы поиграть с частотами. На ней, понятно, удобнее.

Spoiler

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000313] ps7-ttc #0 at df804000, irq=43
[ 0.000625] Console: colour dummy device 80x30
[ 0.000657] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090254] pid_max: default: 32768 minimum: 301
[ 0.090475] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090495] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092627] CPU: Testing write buffer coherency: ok
[ 0.092959] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093020] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.093244] L310 cache controller enabled
[ 0.093264] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.171039] CPU1: Booted secondary processor
[ 0.260229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260362] Brought up 2 CPUs
[ 0.260381] SMP: Total of 2 processors activated.
[ 0.260389] CPU: All CPU(s) started in SVC mode.
[ 0.261049] devtmpfs: initialized
[ 0.263461] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264669] regulator-dummy: no parameters
[ 0.271914] NET: Registered protocol family 16
[ 0.274099] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276406] cpuidle: using governor ladder
[ 0.276419] cpuidle: using governor menu
[ 0.283822] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285347] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285361] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285475] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.307532] bio: create slab <bio-0> at 0
[ 0.308943] vgaarb: loaded
[ 0.309651] SCSI subsystem initialized
[ 0.311097] usbcore: registered new interface driver usbfs
[ 0.311290] usbcore: registered new interface driver hub
[ 0.311516] usbcore: registered new device driver usb
[ 0.312046] media: Linux media interface: v0.10
[ 0.312203] Linux video capture interface: v2.00
[ 0.312440] pps_core: LinuxPPS API ver. 1 registered
[ 0.312452] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.312574] PTP clock support registered
[ 0.312927] EDAC MC: Ver: 3.0.0
[ 0.313972] Advanced Linux Sound Architecture Driver Initialized.
[ 0.316799] DMA-API: preallocated 4096 debug entries
[ 0.316814] DMA-API: debugging enabled by kernel config
[ 0.316892] Switched to clocksource arm_global_timer
[ 0.336794] NET: Registered protocol family 2
[ 0.337783] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.337841] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.337926] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.337971] TCP: reno registered
[ 0.337988] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.338021] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.338270] NET: Registered protocol family 1
[ 0.338631] RPC: Registered named UNIX socket transport module.
[ 0.338643] RPC: Registered udp transport module.
[ 0.338652] RPC: Registered tcp transport module.
[ 0.338660] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338673] PCI: CLS 0 bytes, default 64
[ 0.339110] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.341130] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.343263] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.343449] msgmni has been set to 967
[ 0.344240] io scheduler noop registered
[ 0.344253] io scheduler deadline registered
[ 0.344292] io scheduler cfq registered (default)
[ 0.357391] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.357412] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.479981] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.047784] console [ttyPS0] enabled
[ 1.052040] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.059672] [drm] Initialized drm 1.1.0 20060810
[ 1.076519] brd: module loaded
[ 1.085887] loop: module loaded
[ 1.095313] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.101299] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.109177] libphy: XEMACPS mii bus: probed
[ 1.113545] ------------- phy_id = 0x3625e62
[ 1.118502] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.127224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.133842] ehci-pci: EHCI PCI platform driver
[ 1.141134] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.147980] usbcore: registered new interface driver usb-storage
[ 1.154820] mousedev: PS/2 mouse device common for all mice
[ 1.160942] i2c /dev entries driver
[ 1.167915] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.173396] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.179304] Xilinx Zynq CpuIdle Driver started
[ 1.184144] sdhci: Secure Digital Host Controller Interface driver
[ 1.190286] sdhci: Copyright(c) Pierre Ossman
[ 1.194580] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.201455] mmc0: no vqmmc regulator found
[ 1.205468] mmc0: no vmmc regulator found
[ 1.246912] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.255588] usbcore: registered new interface driver usbhid
[ 1.261101] usbhid: USB HID core driver
[ 1.265812] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.272115] nand: Micron MT29F2G08ABAEAWP
[ 1.276079] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.282021] Bad block table found at page 131008, version 0x01
[ 1.288247] Bad block table found at page 130944, version 0x01
[ 1.294297] 3 ofpart partitions found on MTD device pl353-nand
[ 1.300079] Creating 3 MTD partitions on "pl353-nand":
[ 1.305170] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.313237] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.320549] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.329515] TCP: cubic registered
[ 1.332751] NET: Registered protocol family 17
[ 1.337470] Registering SWP/SWPB emulation handler
[ 1.343335] regulator-dummy: disabling
[ 1.347675] UBI: attaching mtd1 to ubi0
[ 1.873075] UBI: scanning is finished
[ 1.884734] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.891813] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.898575] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.905239] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.912117] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.918098] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.925205] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1076177510
[ 1.934248] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.943464] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.943469] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.947420] ALSA device list:
[ 1.947423] No soundcards found.
[ 1.963823] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.992902] UBIFS: recovery needed
[ 3.136786] UBIFS: recovery completed
[ 3.140497] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 3.146424] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 3.155557] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 3.165441] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 3.170482] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2E282728-7B75-414A-9F50-D8739994A7EE, small LPT model
[ 3.181561] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 3.188300] devtmpfs: mounted
[ 3.191433] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 4.046145] random: dd urandom read with 0 bits of entropy available
[ 4.436933]
[ 4.436933] bcm54xx_config_init
[ 5.046934]
[ 5.046934] bcm54xx_config_init
[ 41.237745] In axi fpga driver!
[ 41.240814] request_mem_region OK!
[ 41.244205] AXI fpga dev virtual address is 0xdf9fc000
[ 41.249346] *base_vir_addr = 0x8c510
[ 41.264565] In fpga mem driver!
[ 41.267786] request_mem_region OK!
[ 41.271291] fpga mem virtual address is 0xe2000000
[ 525.996985] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 526.003081] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 526.926096]
[ 526.926096] bcm54xx_config_init
[ 527.566002]
[ 527.566002] bcm54xx_config_init
[ 530.566530] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 530.572547] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 882.925791] random: nonblocking pool is initialized
[28815.765035] xemacps e000b000.ps7-ethernet: link down
[28816.764940] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[28818.764728] xemacps e000b000.ps7-ethernet: link down
[28827.763798] xemacps e000b000.ps7-ethernet: link up (100/FULL)
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=650 Chain[5] voltage_pic=74 value=900
Fix freq=650 Chain[6] voltage_pic=74 value=900
Fix freq=650 Chain[7] voltage_pic=74 value=900
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=650M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=650M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=650M
Chain[J8] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:700
Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 Asic[ 8]:700
Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 Asic[16]:700
Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 Asic[24]:700
Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 Asic[32]:700
Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 Asic[40]:700
Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 Asic[48]:700
Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 Asic[56]:700
Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700
Chain:5 max freq=700
Chain:5 min freq=700

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:700
Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 Asic[ 8]:700
Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 Asic[16]:700
Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 Asic[24]:700
Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 Asic[32]:700
Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 Asic[40]:700
Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 Asic[48]:700
Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 Asic[56]:700
Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700
Chain:6 max freq=700
Chain:6 min freq=700

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:700
Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 Asic[ 8]:700
Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 Asic[16]:700
Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 Asic[24]:700
Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 Asic[32]:700
Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 Asic[40]:700
Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 Asic[48]:700
Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 Asic[56]:700
Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700
Chain:7 max freq=700
Chain:7 min freq=700

max freq = 700
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:32 remote:33 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:31 remote:32 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,85,0,-86,0,22,0,28
Chain[J7] chip[244] use PIC middle temp offset=85 typeID=55
New offset Chain[6] chip[244] local:30 remote:32 offset:28
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:32 remote:34 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
Chain[J8] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:31 remote:34 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
setStartTimePoint total_tv_start_sys=29121 total_tv_end_sys=29122
restartNum = 2 , auto-reinit enabled...
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=76.3190 Asic[02]=80.3460 Asic[03]=76.6210 Asic[04]=78.2820 Asic[05]=89.2710 Asic[06]=75.7820 Asic[07]=75.0270 Asic[08]=75.6820
Asic[09]=76.9730 Asic[10]=76.0000 Asic[11]=82.1580 Asic[12]=81.1840 Asic[13]=84.0370 Asic[14]=80.1610 Asic[15]=73.3160 Asic[16]=79.1380
Asic[17]=77.3420 Asic[18]=83.0800 Asic[19]=83.0130 Asic[20]=79.5570 Asic[21]=77.4260 Asic[22]=81.1340 Asic[23]=75.5810 Asic[24]=77.0070
Asic[25]=77.7280 Asic[26]=79.8420 Asic[27]=80.0600 Asic[28]=77.9300 Asic[29]=78.3490 Asic[30]=83.7180 Asic[31]=75.2960 Asic[32]=78.8190
Asic[33]=76.3190 Asic[34]=82.2410 Asic[35]=80.4800 Asic[36]=81.7050 Asic[37]=79.8250 Asic[38]=77.3590 Asic[39]=75.1280 Asic[40]=81.3350
Asic[41]=80.7150 Asic[42]=79.8420 Asic[43]=77.7950 Asic[44]=79.4900 Asic[45]=78.9360 Asic[46]=83.2480 Asic[47]=75.5310 Asic[48]=78.8190
Asic[49]=71.7390 Asic[50]=81.4030 Asic[51]=78.4500 Asic[52]=79.4060 Asic[53]=75.7150 Asic[54]=80.1610 Asic[55]=77.5440 Asic[56]=80.8820
Asic[57]=78.8520 Asic[58]=75.2450 Asic[59]=79.8590 Asic[60]=81.1510 Asic[61]=77.7790 Asic[62]=78.4160 Asic[63]=77.5770

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=80.1440 Asic[02]=86.8550 Asic[03]=79.1710 Asic[04]=73.9870 Asic[05]=79.9600 Asic[06]=74.2890 Asic[07]=80.1440 Asic[08]=86.0330
Asic[09]=74.5070 Asic[10]=61.3710 Asic[11]=75.6820 Asic[12]=78.6850 Asic[13]=79.7420 Asic[14]=79.7920 Asic[15]=30.7690 Asic[16]=83.2980
Asic[17]=77.8960 Asic[18]=78.0640 Asic[19]=85.7980 Asic[20]=76.5040 Asic[21]=83.6170 Asic[22]=80.9660 Asic[23]=79.6740 Asic[24]=73.4500
Asic[25]=80.5130 Asic[26]=79.5570 Asic[27]=82.7620 Asic[28]=81.5540 Asic[29]=78.6510 Asic[30]=80.3960 Asic[31]=80.9160 Asic[32]=78.2650
Asic[33]=78.7180 Asic[34]=78.8360 Asic[35]=81.4860 Asic[36]=76.0670 Asic[37]=79.8090 Asic[38]=80.3120 Asic[39]=77.5770 Asic[40]=82.0070
Asic[41]=77.7450 Asic[42]=77.9300 Asic[43]=84.3550 Asic[44]=85.6140 Asic[45]=74.1210 Asic[46]=72.4270 Asic[47]=80.7820 Asic[48]=80.7990
Asic[49]=84.1540 Asic[50]=80.0600 Asic[51]=74.0040 Asic[52]=76.0670 Asic[53]=80.5300 Asic[54]=76.0840 Asic[55]=78.2820 Asic[56]=75.8330
Asic[57]=78.2990 Asic[58]=75.8660 Asic[59]=83.3490 Asic[60]=77.1240
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=81.6880 Asic[02]=79.0710 Asic[03]=83.8020 Asic[04]=77.3260 Asic[05]=81.5200 Asic[06]=81.2850 Asic[07]=72.7290 Asic[08]=80.3460
Asic[09]=81.0500 Asic[10]=82.7620 Asic[11]=74.7590 Asic[12]=74.1040 Asic[13]=86.5870 Asic[14]=77.3760 Asic[15]=78.3660 Asic[16]=80.7650
Asic[17]=84.3220 Asic[18]=81.4860 Asic[19]=72.2420 Asic[20]=81.4860 Asic[21]=76.3020 Asic[22]=78.2320 Asic[23]=77.9630 Asic[24]=74.8090
Asic[25]=87.1240 Asic[26]=73.9370 Asic[27]=88.5660 Asic[28]=79.2890 Asic[29]=77.8960 Asic[30]=77.3760 Asic[31]=76.9900 Asic[32]=79.4900
Asic[33]=79.8250 Asic[34]=79.0710 Asic[35]=77.6610 Asic[36]=82.8790 Asic[37]=82.9800 Asic[38]=75.9000 Asic[39]=75.5980 Asic[40]=77.9630
Asic[41]=74.1210 Asic[42]=75.6650 Asic[43]=77.8460 Asic[44]=73.1820 Asic[45]=75.1110 Asic[46]=82.0900 Asic[47]=80.5470 Asic[48]=74.1040
Asic[49]=80.8820 Asic[50]=78.0470 Asic[51]=80.9660 Asic[52]=83.3150 Asic[53]=82.8120 Asic[54]=74.5570 Asic[55]=77.1080 Asic[56]=79.3560
Asic[57]=78.0640 Asic[58]=79.3560 Asic[59]=83.0300 Asic[60]=79.4230 Asic[61]=81.6040 Asic[62]=82.8120 Asic[63]=75.3800
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
Chain[5] Chip[62] local Temp=57
Chain[5] Chip[62] middle Temp=72
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=28
read failed, old value: Chain[6] Chip[62] local Temp=58
read failed on Chain[6] Chip[62] middle Temp old value:69
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
Chain[7] Chip[62] local Temp=61
Chain[7] Chip[62] middle Temp=76
Done read temp on Chain[7]
set FAN speed according to: temp_highest=76 temp_top1[PWM_T]=76 temp_top1[TEMP_POS_LOCAL]=61 temp_change=1 fix_fan_steps=-37
FAN PWM: 0
read_temp_func Done!
CRC error counter=1057

777AV777 · 14 июн 2018, 13:52

Пробовали во время работы платы трогать со стороны шлейфов. Во многих ситуациях светодиоды на проблемных платах с холодными пайками начинают отключаться.

Gorby200 · 14 июн 2018, 14:07

Проблема именно с Network connection lost. Как так происходит? Переобжал конец, поставил новый свич. То же самое. S7 на этом месте работает как часы. S9 не хочет. На подмену S9 других пока нет.

Вот мои симптомы: https://bitcointalk.to/index.php?topic=3882249.0
Жаль, решения там нет.

Изменено 14 июн 2018, 14:10 пользователем Gorby200

onlypositive · 14 июн 2018, 20:00

Уважаемые форумчане, помогите пожалуйста разобраться.

Сегодня на S9 упал хешрейт до 9, скриншот не сделал и сразу ребутнул. После ребута горит индикатор только одной платы (которая к J8) две остальные не горят + индикатор Normal также не горит. В вебморде miner status не показывает. Что могло случиться? В логе в самом конце пишет:

chain[5] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
After restore: chain[5] PIC fw version=0x00

Лог прилагаю.

Блок питания от майнера отключал/включал (все разъемы), ребут неоднократно делал

Заранее огромное спасибо!!!

kernel.pdf

777AV777 · 14 июн 2018, 20:46

На первой плате pic контроллеру хана

Прошивать надо

onlypositive · 14 июн 2018, 20:50

3 минуты назад, 777AV777 сказал:

На первой плате pic контроллеру хана

Прошивать надо

Прошивать или прямо в ремонт сдавать?

777AV777 · 14 июн 2018, 21:06

Если нет программатора и опыта лучше в ремонт

onlypositive · 14 июн 2018, 21:32

Поставил на прошивку Antminer-S9-all-201705031918-550M-user-Update2UBI-NF.tar.gz — браузер как-будто грузится уже минут 30 и ничего не происходит. Забил заново ip – там все без изменений. В чем может быть проблема? Или этой прошивкой делу не помочь в любом случае?

Splinter · 15 июн 2018, 06:06

@onlypositive Вы рано сняли лог в своем первом посте не дождавшись окончания загрузки. Поэтому однозначно сказать что обойдется только прошивкой PIC на первой (J6) плате нельзя. Как вам уже сказал Адам, нужно как минимум прошить м/к PIC на первой плате. То что вы попытались прошить плату управления делу никак не поможет. Нужно с помощью программатора прошить м/к PIC на hash-плате. Если плата управления все еще работоспособна после ваших экспериментов с прошивкой, то подождите после включения минут 10 и выложите еще раз лог, посмотрим насколько масштабна проблема.

Gorby200 · 15 июн 2018, 07:05

Касаемо проблемы моего S9 с Network connection lost. Ппц. Проблема в пуле pool.bitcoin.com. S7 работает нормально, S9 рвет соединения. Как такое может быть? Что там со стратумом? Сейчас зарегистрировался на connectbtc - и все сразу нормализовалось. Я два дня убил на танцы с бубном. Вот такие чудеса. Всем спасибо за помощь!

RuEng · 16 июн 2018, 14:58

В 12.06.2018 в 06:27, RuEng сказал:

Вот так на частоте 650

и ошибки валят без остановки, потом плата падает.

А вот так на частоте 400

ошибок уже меньше и падает реже, соответственно.

что скажите господа гуру?

менять 8-й чип, а на 13-й и 51-й забить?

8-й заменил и все ок. А для поклонников лога, тут все есть и частота и работа чипов, просто наглядней.

RuEng · 16 июн 2018, 16:19

Я так понял, тот кто репутацию понижает, тот логам поклоняется)))

RuEng · 16 июн 2018, 16:46

Вот есть у меня реальная головоломка. Лежит давно плата S9, принесли от других мастеров, половина чипов посносили. Чипы запаял, питание на всех в норме. В логе пишет 0 asic. На первых 5-ти чипах нет 1.8 вольт на RI, а вот на 6-м и всех остальных есть. Хочу померить на самом чипе VDD0V8 и VDD1V8. Без радиаторов не страшно запускать плату?

Splinter · 16 июн 2018, 16:56

3 минуты назад, RuEng сказал:

Вот есть у меня реальная головоломка. Лежит давно плата S9, принесли от других мастеров, половина чипов посносили. Чипы запаял, питание на всех в норме. В логе пишет 0 asic. На первых 5-ти чипах нет 1.8 вольт на RI, а вот на 6-м и всех остальных есть. Хочу померить на самом чипе VDD0V8 и VDD1V8. Без радиаторов не страшно запускать плату?

При ASIC=0 чипы все равно не примут конфигурацию. А на дефолте они не много потребляют и греются не очень. Кинь любой вентилятор сверху и мерий.

onlypositive · 21 июн 2018, 08:55

В 15.06.2018 в 09:06, Splinter сказал:

@onlypositive Вы рано сняли лог в своем первом посте не дождавшись окончания загрузки. Поэтому однозначно сказать что обойдется только прошивкой PIC на первой (J6) плате нельзя. Как вам уже сказал Адам, нужно как минимум прошить м/к PIC на первой плате. То что вы попытались прошить плату управления делу никак не поможет. Нужно с помощью программатора прошить м/к PIC на hash-плате. Если плата управления все еще работоспособна после ваших экспериментов с прошивкой, то подождите после включения минут 10 и выложите еще раз лог, посмотрим насколько масштабна проблема.

Спасибо за ответ!

Дал поработать около часа. Во вложении обновленный лог, посмотрите пожалуйста. Огромное спасибо!

kernel.pdf

Ремонт: Bitmain Antminer s7, s9, l3+

Рекомендуемые сообщения

Ссылка на комментарий

Поделиться на другие сайты

Топ авторов темы

Популярные дни

Топ авторов темы

Популярные дни

Популярные посты

alexey7mechanic

adv

adv

Изображения в теме

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Создать учетную запись

Войти

Последние посетители 0 пользователей онлайн

Similar Topics

Ресурсы

О Форуме

Соц.сети

Почта