Перейти к содержанию

GoDs_CMD

Рекомендуемые сообщения

Ну так я же тебе из консоли эти данные и дал 0,1,2  - это девойсы , первые 2 это 7970и 7950. Давай луше конфиг попробуем замастырить.

 

Вот, что я скумекал  

 

{
"pools" : [
{
"url" : "stratum+tcp://ltcmine.ru:3333",
"user" : "******",
"pass" : "*****"
},
{
"url" : "secondpool_reserv.com:8332",
"user" : "login",
"pass" : "pass"
},
{
"url" : "zabil_kak_tretiy_po_angliyski.com:8332",
"user" : "login",
"pass" : "pass"
}
],

"intensity" : "19,18,15",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",

"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",

"kernel-path" : "/usr/local/bin

"kernel" : "poclbm,poclbm,poclbm",
"queue" : "6",

 

 

Пробую запускать конфиг не получается        C:\cgminer-2.11.1-win32\cgminer.exe --scrypt -c 123.conf

Изменено пользователем kosta
Ссылка на комментарий
Поделиться на другие сайты

и не получится.

 

а так может получиться

...

"temp-hysteresis" : "3",
"kernel" : "poclbm,poclbm,poclbm",
"queue" : "6",

"kernel-path" : "/usr/local/bin
 

Ссылка на комментарий
Поделиться на другие сайты

Сам то пробовал?

:)

Нет.

И не буду.

Но за запятыми я бы на твоём месте повнимательнее смотрел бы.

Ссылка на комментарий
Поделиться на другие сайты

привет, может кто даст настройки для лайты (cgminer-2.10.5-win32 ) 2х7870, а то чё-то они никак не хотят нормально работать, хотя в битках под тот же cgminer-2.10.5-win32 работают на ура

собственно вот скрин и сонфиг

BTC

cgminer -o pool.50btc.com:8332 -u усер -p пароль -I 9 -g 1 -w 128

post-1471-0-15032300-1363100460_thumb.jpg

....

LTC

cgminer -o ltcmine.ru:3333 -u усер -p пароль --scrypt --worksize 256 --lookup-gap 2 --thread-concurrency 8192 -g 1 --intensity 19

post-1471-0-64252100-1363100470_thumb.jpg

Ссылка на комментарий
Поделиться на другие сайты

 

Подскажите! Это правильная картинка? Или что то не так настроено???

Ссылка на комментарий
Поделиться на другие сайты

,

для битков нормалёк..

А что значит в конце строки пулл 0??? И на сайте я оффлайн...

Ссылка на комментарий
Поделиться на другие сайты

"intensity" : "8,8,8,8,8",
"vectors" : "2,2,2,2,2",
"worksize" : "256,256,256,256,256",
"kernel" : "phatk,phatk,phatk,phatk,phatk",
"gpu-engine" : "0-950,0-915,0-950,0-950,0-950",
"gpu-fan" : "0-15,0-35,0-30,0-40,0-30",
"gpu-memclock" : "300,300,300,300,300",
"gpu-memdiff" : "0,0,0,0,0",
"gpu-powertune" : "0,0,0,0,0",
"gpu-vddc" : "1.200,1.200,1.200,1.200,1.200",
"temp-cutoff" : "95,95,95,95,95",
"temp-overheat" : "85,85,85,85,85",
"temp-target" : "75,75,75,75,75",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"log" : "5",
"queue" : "5",
"retry-pause" : "5",
"scan-time" : "60",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

 

где можно посмотреть комментарий к каждой строке???

Ссылка на комментарий
Поделиться на другие сайты

, в readme

 









--api-allow         Allow API access (if enabled) only to the given list of [W:]IP[/Prefix] address[/subnets]
                    This overrides --api-network and you must specify 127.0.0.1 if it is required
                    W: in front of the IP address gives that address privileged access to all api commands
--api-description   Description placed in the API status header (default: cgminer version)
--api-groups        API one letter groups G:cmd:cmd[,P:cmd:*...]
                    See API-README for usage
--api-listen        Listen for API requests (default: disabled)
                    By default any command that does not just display data returns access denied
                    See --api-allow to overcome this
--api-network       Allow API (if enabled) to listen on/for any address (default: only 127.0.0.1)
--api-port          Port number of miner API (default: 4028)
--auto-fan          Automatically adjust all GPU fan speeds to maintain a target temperature
--auto-gpu          Automatically adjust all GPU engine clock speeds to maintain a target temperature
--balance           Change multipool strategy from failover to even share balance
--benchmark         Run cgminer in benchmark mode - produces no shares
--compact           Use compact display without per device statistics
--debug|-D          Enable debug output
--disable-rejecting Automatically disable pools that continually reject shares
--expiry|-E <arg>   Upper bound on how many seconds after getting work we consider a share from it stale (default: 120)
--failover-only     Don't leak work to backup pools when primary pool is lagging
--fix-protocol      Do not redirect to a different getwork protocol (eg. stratum)
--kernel-path|-K <arg> Specify a path to where bitstream and kernel files are (default: "/usr/local/bin")
--load-balance      Change multipool strategy from failover to efficiency based balance
--log|-l <arg>      Interval in seconds between log output (default: 5)
--monitor|-m <arg>  Use custom pipe cmd for output messages
--net-delay         Impose small delays in networking to not overload slow routers
--no-submit-stale   Don't submit shares if they are detected as stale
--pass|-p <arg>     Password for bitcoin JSON-RPC server
--per-device-stats  Force verbose mode and output per-device statistics
--protocol-dump|-P  Verbose dump of protocol-level activities
--queue|-Q <arg>    Minimum number of work items to have queued (0 - 10) (default: 1)
--quiet|-q          Disable logging output, display status and errors
--real-quiet        Disable all output
--remove-disabled   Remove disabled devices entirely, as if they didn't exist
--rotate <arg>      Change multipool strategy from failover to regularly rotate at N minutes (default: 0)
--round-robin       Change multipool strategy from failover to round robin on failure
--scan-time|-s <arg> Upper bound on time spent scanning current work, in seconds (default: 60)
--sched-start <arg> Set a time of day in HH:MM to start mining (a once off without a stop time)
--sched-stop <arg>  Set a time of day in HH:MM to stop mining (will quit without a start time)
--scrypt            Use the scrypt algorithm for mining (litecoin only)
--sharelog <arg>    Append share log to file
--shares <arg>      Quit after mining N shares (default: unlimited)
--socks-proxy <arg> Set socks4 proxy (host:port) for all pools without a proxy specified
--syslog            Use system log for output messages (default: standard error)
--temp-cutoff <arg> Temperature where a device will be automatically disabled, one value or comma separated list (default: 95)
--text-only|-T      Disable ncurses formatted screen output
--url|-o <arg>      URL for bitcoin JSON-RPC server
--user|-u <arg>     Username for bitcoin JSON-RPC server
--verbose           Log verbose output to stderr as well as status output
--userpass|-O <arg> Username:Password pair for bitcoin JSON-RPC server
Options for command line only:
--config|-c <arg>   Load a JSON-format configuration file
See example.conf for an example configuration.
--help|-h           Print this message
--version|-V        Display version and exit


GPU only options:

--auto-fan          Automatically adjust all GPU fan speeds to maintain a target temperature
--auto-gpu          Automatically adjust all GPU engine clock speeds to maintain a target temperature
--device|-d <arg>   Select device to use, (Use repeat -d for multiple devices, default: all)
--disable-gpu|-G    Disable GPU mining even if suitable devices exist
--gpu-threads|-g <arg> Number of threads per GPU (1 - 10) (default: 2)
--gpu-dyninterval <arg> Set the refresh interval in ms for GPUs using dynamic intensity (default: 7)
--gpu-engine <arg>  GPU engine (over)clock range in Mhz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)
--gpu-fan <arg>     GPU fan percentage range - one value, range and/or comma separated list (e.g. 25-85,85,65)
--gpu-map <arg>     Map OpenCL to ADL device order manually, paired CSV (e.g. 1:0,2:1 maps OpenCL 1 to ADL 0, 2 to 1)
--gpu-memclock <arg> Set the GPU memory (over)clock in Mhz - one value for all or separate by commas for per card.
--gpu-memdiff <arg> Set a fixed difference in clock speed between the GPU and memory in auto-gpu mode
--gpu-powertune <arg> Set the GPU powertune percentage - one value for all or separate by commas for per card.
--gpu-reorder       Attempt to reorder GPU devices according to PCI Bus ID
--gpu-vddc <arg>    Set the GPU voltage in Volts - one value for all or separate by commas for per card.
--intensity|-I <arg> Intensity of GPU scanning (d or -10 -> 10, default: d to maintain desktop interactivity)
--kernel|-k <arg>   Override kernel to use (diablo, poclbm, phatk or diakgcn) - one value or comma separated
--ndevs|-n          Enumerate number of detected GPUs and exit
--no-restart        Do not attempt to restart GPUs that hang
--temp-hysteresis <arg> Set how much the temperature can fluctuate outside limits when automanaging speeds (default: 3)
--temp-overheat <arg> Overheat temperature when automatically managing fan and GPU speeds (default: 85)
--temp-target <arg> Target temperature when automatically managing fan and GPU speeds (default: 75)
--vectors|-v <arg>  Override detected optimal vector (1, 2 or 4) - one value or comma separated list
--worksize|-w <arg> Override detected optimal worksize - one value or comma separated list

 

 



Вышла новая версия /  CGMAINER 2.11.2

Изменено пользователем ultra
Ссылка на комментарий
Поделиться на другие сайты

Всем привет! Во время смены пользователя(win7 x64), cgminer перестаёт работать(нагрузка на gpu 0%). В чем проблема?

Изменено пользователем dedlnu
Ссылка на комментарий
Поделиться на другие сайты

Всем привет! Во время смены пользователя(win7 x64), cgminer перестаёт работать(нагрузка на gpu 0%). В чем проблема?

в том что это смена пользователя, а с чего вы решили что  при неактивном пользователе в однопользовательской системе у вас все будет активно работать? это же не сервер.

Ссылка на комментарий
Поделиться на другие сайты

привет, может кто даст настройки для лайты (cgminer-2.10.5-win32 ) 2х7870, а то чё-то они никак не хотят нормально работать, хотя в битках под тот же cgminer-2.10.5-win32 работают на ура

собственно вот скрин и сонфиг

BTC

cgminer -o pool.50btc.com:8332 -u усер -p пароль -I 9 -g 1 -w 128

attachicon.gifcg-btc.jpg

....

LTC

cgminer -o ltcmine.ru:3333 -u усер -p пароль --scrypt --worksize 256 --lookup-gap 2 --thread-concurrency 8192 -g 1 --intensity 19

attachicon.gifcg-ltc.jpg

 

cgminer.exe --scrypt -w 256 -v 1 --shaders 1280 --lookup-gap 2 --thread-concurrency 5120 -I 12 -o stratum+tcp://ltcmine.ru:3333 -u XXX -p YYY --gpu-engine 1100 --gpu-memclock 1300

370Kh

 

для ВТС

 

cgminer -o http://pool.50btc.com:8332 -u XXX -p 1 -I 10 -w 256 -v 1 -g 2 --gpu-engine 1200 --gpu-memclock 300 --gpu-fan 100 --kernel diablo

450Mh

Изменено пользователем l2sup
Ссылка на комментарий
Поделиться на другие сайты

Ну так я же тебе из консоли эти данные и дал 0,1,2  - это девойсы , первые 2 это 7970и 7950. Давай луше конфиг попробуем замастырить.

 

Вот, что я скумекал  

 

{

"pools" : [

{

"url" : "stratum+tcp://ltcmine.ru:3333",

"user" : "******",

"pass" : "*****"

},

{

"url" : "secondpool_reserv.com:8332",

"user" : "login",

"pass" : "pass"

},

{

"url" : "zabil_kak_tretiy_po_angliyski.com:8332",

"user" : "login",

"pass" : "pass"

}

],

 

"intensity" : "19,18,15",

"temp-cutoff" : "95,95,95,95",

"temp-overheat" : "85,85,85,85",

"temp-target" : "75,75,75,75",

 

"auto-fan" : true,

"auto-gpu" : true,

"expiry" : "120",

"failover-only" : true,

"gpu-threads" : "2",

"log" : "5",

"queue" : "1",

"scan-time" : "60",

"temp-hysteresis" : "3",

 

"kernel-path" : "/usr/local/bin

 

"kernel" : "poclbm,poclbm,poclbm",

"queue" : "6",

 

 

Пробую запускать конфиг не получается        C:\cgminer-2.11.1-win32\cgminer.exe --scrypt -c 123.conf

Реально есть хоть один умный кто может сделать конфиг фаил рабочий?

Ссылка на комментарий
Поделиться на другие сайты

Ребята очередность параметров в конфиге, соответствует очередности карт на материнке сверху вниз? Или как? Как определить в какой последовательности писать частоты и т.д. Для каждой из карт???

Если чипов в карте две то параметров тоже два?

Изменено пользователем Виктор
Ссылка на комментарий
Поделиться на другие сайты

очередность смотреть по cgminer -n, в конфиге соответсвенно параметры для карт по возростающей через запятую

Ссылка на комментарий
Поделиться на другие сайты

Подскажите каким параметром сделать чтобы cgminer рестартовался при вылете статуса в sick или dead.

Ссылка на комментарий
Поделиться на другие сайты

На рабочем компе задолбали фризы и тормоза во время майна.

И так подключил моник к intelHD. 2 6870 торчат в pci-e(без моников и заглушек)

Поехали:

aa229d6ed55e.jpg

 

 

При этом майнер все таки стартует, майнит, но тупо не мониторит частоту и обороты, что очень стремно.

 

Запускаю с -n :

394d7430c359.png

 


Пробовал с --gpu-platform 1, не помогает. Про gpu-map читал в ридми так ниче и не понял.

 









GPU DEVICE ISSUES and use of --gpu-map

GPUs mine with OpenCL software via the GPU device driver. This means you need
to have both an OpenCL SDK installed, and the GPU device driver RUNNING (i.e.
Xorg up and running configured for all devices that will mine on linux etc.)
Meanwhile, the hardware monitoring that cgminer offers for AMD devices relies
on the ATI Display Library (ADL) software to work. OpenCL DOES NOT TALK TO THE
ADL. There is no 100% reliable way to know that OpenCL devices are identical
to the ADL devices, as neither give off the same information. cgminer does its
best to correlate these devices based on the order that OpenCL and ADL numbers
them. It is possible that this will fail for the following reasons:

1. The device order is listed differently by OpenCL and ADL (rare), even if the
number of devices is the same.
2. There are more OpenCL devices than ADL. OpenCL stupidly sees one GPU as two
devices if you have two monitors connected to the one GPU.
3. There are more ADL devices than OpenCL. ADL devices include any ATI GPUs,
including ones that can't mine, like some older R4xxx cards.

To cope with this, the ADVANCED option for --gpu-map is provided with cgminer.
DO NOT USE THIS UNLESS YOU KNOW WHAT YOU ARE DOING. The default will work the
vast majority of the time unless you know you have a problem already.

To get useful information, start cgminer with just the -n option. You will get
output that looks like this:

[2012-04-25 13:17:34] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[2012-04-25 13:17:34] CL Platform 0 name: AMD Accelerated Parallel Processing
[2012-04-25 13:17:34] CL Platform 0 version: OpenCL 1.1 AMD-APP (844.4)
[2012-04-25 13:17:34] Platform 0 devices: 3
[2012-04-25 13:17:34]   0       Tahiti
[2012-04-25 13:17:34]   1       Tahiti
[2012-04-25 13:17:34]   2       Cayman
[2012-04-25 13:17:34] GPU 0 AMD Radeon HD 7900 Series  hardware monitoring enabled
[2012-04-25 13:17:34] GPU 1 AMD Radeon HD 7900 Series  hardware monitoring enabled
[2012-04-25 13:17:34] GPU 2 AMD Radeon HD 6900 Series hardware monitoring enabled
[2012-04-25 13:17:34] 3 GPU devices max detected

Note the number of devices here match, and the order is the same. If devices 1
and 2 were different between Tahiti and Cayman, you could run cgminer with:
--gpu-map 2:1,1:2
And it would swap the monitoring it received from ADL device 1 and put it to
opencl device 2 and vice versa.

If you have 2 monitors connected to the first device it would look like this:

[2012-04-25 13:17:34] Platform 0 devices: 4
[2012-04-25 13:17:34]   0       Tahiti
[2012-04-25 13:17:34]   1       Tahiti
[2012-04-25 13:17:34]   2       Tahiti
[2012-04-25 13:17:34]   3       Cayman
[2012-04-25 13:17:34] GPU 0 AMD Radeon HD 7900 Series  hardware monitoring enabled
[2012-04-25 13:17:34] GPU 1 AMD Radeon HD 7900 Series  hardware monitoring enabled
[2012-04-25 13:17:34] GPU 2 AMD Radeon HD 6900 Series hardware monitoring enabled

To work around this, you would use:
-d 0 -d 2 -d 3 --gpu-map 2:1,3:2

If you have an older card as well as the rest it would look like this:

[2012-04-25 13:17:34] Platform 0 devices: 3
[2012-04-25 13:17:34]   0       Tahiti
[2012-04-25 13:17:34]   1       Tahiti
[2012-04-25 13:17:34]   2       Cayman
[2012-04-25 13:17:34] GPU 0 AMD Radeon HD 4500 Series  hardware monitoring enabled
[2012-04-25 13:17:34] GPU 1 AMD Radeon HD 7900 Series  hardware monitoring enabled
[2012-04-25 13:17:34] GPU 2 AMD Radeon HD 7900 Series  hardware monitoring enabled
[2012-04-25 13:17:34] GPU 3 AMD Radeon HD 6900 Series hardware monitoring enabled

To work around this you would use:
--gpu-map 0:1,1:2,2:3

 

 

 

 

 

 

Единственное что помогло, это затычка в gpu0. Появляются дикие фризы(поддтормаживания) раз в 5-10сек. Я так понимаю это из-за дублирования или расширения на 2ой монитор. CCC не стоит.

Ссылка на комментарий
Поделиться на другие сайты

такая же петрушка была когда захотел моник выводить через встроенное видео, а на ати майнить, что бы не лагало в процессе работы )

тоже примерно такие же ошибки выдавал, но запускался и майнил на стоковых параметрах. мне тоже говорили про заглушку, но я так ничего и не стал делать) в общем не починил )

Ссылка на комментарий
Поделиться на другие сайты

Всё время майнил на одной 5850, а недавно появилась вторая видеокарта 7950, подскажите может как-то стоит изменить батник ЦГмайнера для большей эффективности?

Сейчас он выглядит следующим образом - х:\cgminer-2.11.2-win32\cgminer.exe -o http://pool.com:port -u login -p pass -I 11,9--auto-fan --auto-gpu --gpu-engine 975-1150,750-860 --gpu-memclock 830,300

При этом хэшрейт получается в среднем 520/340, сильно насиловать карточки стремления нет, но может что-то можно оптимизировать?

Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу
  • Similar Topics

    • Майнинг на прошитой майнером ПЛИС с помощью cgminer или скрипта

      Возможно ли майнить с помощью cgminer с помощью ПЛИС прошитой OpenSource Fpga miner.Если нет,то посоветуйте пожалуйста скрипт которым можно

      в ASIC/FPGA майнеры

    • cgminer не видит видеокарты

      Прошу сильно не пинать и шапками не закидывать, но "сдаюсь" и прошу подсказки: поиск не рулит, даже не понимаю куда копать.    Исходные данные: Win7Ultimatex64, две AMD Radeon R9 290x, самые свежие драйвера.   cgminer 4.1.0. Запускаю руками, заводя пул, логин и пароль. При этом 0 h/s, постоянно идут строки stratum from pool 0 detected new block. В окне программы надпись "no devices detected".   На форуме пишут, что без параметров и с пустым конфигом майнинг в любом случае должен хотя бы за

      в Программы для майнинга

    • исходники cgminer для Baikal

      Привет. А существуют в свободном доступе исходники sgminer-a под байкал ?  

      в ASIC/FPGA майнеры

    • ASIC L3+ подключение SOLO через CGMINER

      Ребята, вожусь уже неделю с этим асиком, имеется аппарат L3+ от Bitmain, хочу настроить его соло под монету НАПРИМЕР Grandcoin (просто имеется кошелек, хотел бы для примера взять ее). Как это сделать через  CGMiner (версия 4.10.0). В кошельке грандкоина есть раздел MINING, со строчками Server, port, username, password. У грандкоина порты RPC 12378, Connection 12377 (чтобы вы не искали), IP майнера 192.168.0.6. помогите составить ВСЁ!) Начиная от настройки кошелька (какой открывать, грандкоин QT

      в Программы для майнинга

    • Не запускается cgminer-3.9.0

      Ребята подскажите пожалуйста в чем дело, прописал настройки. Сделал полностью по инструкции. https://forum.bits.media/index.php?/topic/239-cgminer/?hl=%2B%D0%B7%D0%B0%D0%BF%D1%83%D1%81%D0%BA%D0%B0%D0%B5%D1%82%D1%81%D1%8F+%2Bcgminer   Просто окно открывается на долю сек. и закрывается. Была версия cgminer-3.7.2 так от там совсем вот такая ошибка. http://floomby.ru/s1/84PAYH А все началось с того как заменил сегодня видеокарту на 6870. Помогите пожалуйста.

      в Общие вопросы по майнингу

×
×
  • Создать...