Jump to content
Lexis77

Antminer. Все модели

Recommended Posts

Здравствуйте. Хочу разобрать свой S3  для чистки и замены термопасты. Какую посоветуете? 

Share this post


Link to post
Share on other sites

Ребят, дайте пожалуста ктонить схему распайки шлейфа T17 с программатором. Спасибо

Edited by autovaz

Share this post


Link to post
Share on other sites

Всем привет. 

Подскажите пожалуйста, кто сталкивался с R4 - былили на них стоковые прошивки с выбором хешрейта? 

Поделитесь плиз, если есть у кого? Замучался с одним экземпляром

Share this post


Link to post
Share on other sites

Господа всем здравствуйте. Новый Antminer S19j Pro, работал 10 дней потом показывает нулевой RATE, причем все остальное зеленое на странице Асика. Перезагрузил его, он отработал 24 часа та же картина. Перезагрузил, работает... Что это может быть, может кто встречался?

Share this post


Link to post
Share on other sites

Разобрался. Был плохой контакт у одного из шнуров. При отключении одного шнура, не помню центрального или крайнего Асик работать продолжает, но без нагрузки, то есть без rate, воткнул от души и пока работает...

 

Share this post


Link to post
Share on other sites

Всем привет! 

 

Подскажите - есть несколько S15. Работают нормально сначала. Через какое-то время пропадает хешрейт на 1-2-3 или вообще всех хешплатах. После перезагрузки (хоть через админку, хоть через розетку) все восстанавливается и опять видит все 4 хеш-платы. Но через какое-то время опять то же самое - хешки видит, но хешрейт у них по нулям.

 

В чем может быть причина? Куда копать? Некоторые говорят, что надо вольтаж на платы повышать. Но на стоковой прошивке этого не сделать, а кастом есть только бета и не очень хочется его ставить.

 

Скрытый текст

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 194372K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 35004K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 21964K (cc58e000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1409217361
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 718
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 721
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID CC119F9A-4D43-47D8-96E5-3DD295BEE6D2, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 2200/444, WL threshold: 4096, image sequence number: 431605553
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 730
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 733
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1C2325D9-7722-419F-8985-90C799C07231, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
 [2021-11-21 23:45:10.057] start listen on 6060 ...
 [2021-11-21 23:50:39.068] set_start_time_point total_tv_start_sys=30497 total_tv_end_sys=30498

2021-11-21 15:23:13 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-11-21 15:23:13 driver-btm-soc.c:8125:bitmain_soc_init: S15
2021-11-21 15:23:13 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-11-21 15:23:13 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-11-21 15:23:13 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-11-21 15:23:13 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-11-21 15:23:13 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-11-21 15:23:13 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-11-21 15:23:13 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:35:07 CST 2019 type: Antminer S15
2021-11-21 15:23:13 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:40:49
2021-11-21 15:23:13 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-11-21 15:23:15 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8102f54e57408854
2021-11-21 15:23:15 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-11-21 15:23:15 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0xf
2021-11-21 15:23:15 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-11-21 15:23:15 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2021-11-21 15:23:15 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-11-21 15:23:15 driver-btm-soc.c:1104:check_chain: !! chain[3]is exist
2021-11-21 15:23:26 eeprom.c:1418:eeprom_load: done
2021-11-21 15:23:26 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0100
2021-11-21 15:23:26 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0103
2021-11-21 15:23:26 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0100
2021-11-21 15:23:26 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0103
2021-11-21 15:23:26 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0100
2021-11-21 15:23:26 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0103
2021-11-21 15:23:26 driver-btm-soc.c:7431:init_pcb_version: chain[3] PCB Version : 0x0100
2021-11-21 15:23:26 driver-btm-soc.c:7449:init_pcb_version: chain[3] BOM Version : 0x0103
2021-11-21 15:23:26 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-11-21 15:23:31 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-11-21 15:23:31 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2021-11-21 15:23:36 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2021-11-21 15:23:37 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2021-11-21 15:23:41 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2021-11-21 15:23:42 dspic33ep16gs202.c:538:reset_pic: chain[3] ok
2021-11-21 15:23:46 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[3] ok
2021-11-21 15:23:46 power.c:137:power_init: power init ... 
2021-11-21 15:23:46 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 3
2021-11-21 15:23:46 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2021-11-21 15:23:46 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2021-11-21 15:23:46 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2021-11-21 15:23:46 power.c:114:power_on: init gpio907
2021-11-21 15:23:49 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-11-21 15:23:49 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-11-21 15:23:50 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2021-11-21 15:23:51 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=3!
2021-11-21 15:23:54 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2021-11-21 15:24:24 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 18.200000
2021-11-21 15:24:24 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 18.200000
2021-11-21 15:24:24 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 18.200000
2021-11-21 15:24:24 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[3] = 18.200000
2021-11-21 15:24:24 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 18.20, min = 18.20
2021-11-21 15:24:24 power.c:149:set_working_voltage: working_voltage = 18.200000
2021-11-21 15:24:24 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-11-21 15:24:24 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000 
2021-11-21 15:24:24 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:255 IC[001]:255 IC[002]:255 IC[003]:245 IC[004]:255 IC[005]:255 
IC[006]:245 IC[007]:255 IC[008]:255 IC[009]:255 IC[010]:255 IC[011]:255 
IC[012]:255 IC[013]:245 IC[014]:255 IC[015]:255 IC[016]:255 IC[017]:255 
IC[018]:255 IC[019]:255 IC[020]:255 IC[021]:255 IC[022]:245 IC[023]:255 
IC[024]:255 IC[025]:255 IC[026]:255 IC[027]:245 IC[028]:255 IC[029]:255 
IC[030]:245 IC[031]:255 IC[032]:255 IC[033]:255 IC[034]:255 IC[035]:255 
IC[036]:255 IC[037]:255 IC[038]:255 IC[039]:255 IC[040]:245 IC[041]:255 
IC[042]:255 IC[043]:255 IC[044]:255 IC[045]:255 IC[046]:245 IC[047]:255 
IC[048]:255 IC[049]:255 IC[050]:255 IC[051]:255 IC[052]:245 IC[053]:255 
IC[054]:255 IC[055]:255 IC[056]:255 IC[057]:245 IC[058]:255 IC[059]:255 
IC[060]:255 IC[061]:255 IC[062]:255 IC[063]:255 IC[064]:255 IC[065]:245 
IC[066]:255 IC[067]:255 IC[068]:255 IC[069]:255 IC[070]:245 IC[071]:255 
voltage: 16.50 V
hash rate: 04644 GH/s

freq data per ASIC in mode2:
IC[000]:395 IC[001]:395 IC[002]:395 IC[003]:395 IC[004]:395 IC[005]:395 
IC[006]:395 IC[007]:395 IC[008]:395 IC[009]:395 IC[010]:395 IC[011]:395 
IC[012]:395 IC[013]:395 IC[014]:395 IC[015]:395 IC[016]:395 IC[017]:395 
IC[018]:395 IC[019]:395 IC[020]:395 IC[021]:395 IC[022]:395 IC[023]:395 
IC[024]:395 IC[025]:395 IC[026]:395 IC[027]:395 IC[028]:395 IC[029]:395 
IC[030]:395 IC[031]:395 IC[032]:395 IC[033]:395 IC[034]:395 IC[035]:395 
IC[036]:395 IC[037]:395 IC[038]:395 IC[039]:395 IC[040]:395 IC[041]:395 
IC[042]:395 IC[043]:395 IC[044]:395 IC[045]:395 IC[046]:395 IC[047]:395 
IC[048]:395 IC[049]:395 IC[050]:395 IC[051]:395 IC[052]:395 IC[053]:395 
IC[054]:395 IC[055]:395 IC[056]:395 IC[057]:395 IC[058]:395 IC[059]:395 
IC[060]:395 IC[061]:395 IC[062]:395 IC[063]:395 IC[064]:395 IC[065]:395 
IC[066]:395 IC[067]:395 IC[068]:395 IC[069]:395 IC[070]:395 IC[071]:395 
voltage in mode2: 18.20 V
hash rate in mode2: 07268 GH/s

2021-11-21 15:24:24 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:240 IC[001]:230 IC[002]:240 IC[003]:240 IC[004]:240 IC[005]:240 
IC[006]:240 IC[007]:240 IC[008]:240 IC[009]:240 IC[010]:230 IC[011]:240 
IC[012]:240 IC[013]:240 IC[014]:240 IC[015]:240 IC[016]:240 IC[017]:230 
IC[018]:240 IC[019]:240 IC[020]:230 IC[021]:240 IC[022]:240 IC[023]:240 
IC[024]:240 IC[025]:240 IC[026]:240 IC[027]:240 IC[028]:240 IC[029]:230 
IC[030]:240 IC[031]:240 IC[032]:240 IC[033]:230 IC[034]:240 IC[035]:240 
IC[036]:240 IC[037]:240 IC[038]:240 IC[039]:240 IC[040]:240 IC[041]:230 
IC[042]:230 IC[043]:240 IC[044]:240 IC[045]:240 IC[046]:240 IC[047]:240 
IC[048]:240 IC[049]:240 IC[050]:240 IC[051]:240 IC[052]:240 IC[053]:230 
IC[054]:240 IC[055]:230 IC[056]:240 IC[057]:240 IC[058]:240 IC[059]:240 
IC[060]:240 IC[061]:240 IC[062]:240 IC[063]:230 IC[064]:240 IC[065]:240 
IC[066]:240 IC[067]:240 IC[068]:240 IC[069]:230 IC[070]:240 IC[071]:240 
voltage: 16.50 V
hash rate: 04355 GH/s

freq data per ASIC in mode2:
IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:380 
IC[006]:380 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 
IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:380 
IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:380 
IC[024]:385 IC[025]:385 IC[026]:380 IC[027]:385 IC[028]:385 IC[029]:385 
IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:380 IC[034]:385 IC[035]:385 
IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:380 
IC[042]:380 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 
IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:380 
IC[054]:385 IC[055]:380 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 
IC[060]:385 IC[061]:385 IC[062]:385 IC[063]:380 IC[064]:385 IC[065]:385 
IC[066]:385 IC[067]:385 IC[068]:385 IC[069]:380 IC[070]:385 IC[071]:385 
voltage in mode2: 18.20 V
hash rate in mode2: 07041 GH/s

2021-11-21 15:24:24 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:230 IC[001]:240 IC[002]:240 IC[003]:240 IC[004]:240 IC[005]:240 
IC[006]:240 IC[007]:240 IC[008]:240 IC[009]:240 IC[010]:240 IC[011]:230 
IC[012]:240 IC[013]:240 IC[014]:230 IC[015]:240 IC[016]:240 IC[017]:240 
IC[018]:240 IC[019]:230 IC[020]:240 IC[021]:240 IC[022]:240 IC[023]:240 
IC[024]:240 IC[025]:240 IC[026]:240 IC[027]:240 IC[028]:240 IC[029]:230 
IC[030]:240 IC[031]:240 IC[032]:240 IC[033]:240 IC[034]:240 IC[035]:230 
IC[036]:240 IC[037]:240 IC[038]:240 IC[039]:240 IC[040]:240 IC[041]:230 
IC[042]:230 IC[043]:240 IC[044]:240 IC[045]:240 IC[046]:240 IC[047]:240 
IC[048]:240 IC[049]:240 IC[050]:240 IC[051]:240 IC[052]:240 IC[053]:230 
IC[054]:230 IC[055]:240 IC[056]:240 IC[057]:240 IC[058]:240 IC[059]:240 
IC[060]:240 IC[061]:230 IC[062]:240 IC[063]:240 IC[064]:240 IC[065]:240 
IC[066]:230 IC[067]:240 IC[068]:240 IC[069]:240 IC[070]:240 IC[071]:240 
voltage: 16.50 V
hash rate: 04356 GH/s

freq data per ASIC in mode2:
IC[000]:355 IC[001]:355 IC[002]:365 IC[003]:365 IC[004]:375 IC[005]:375 
IC[006]:375 IC[007]:375 IC[008]:365 IC[009]:365 IC[010]:355 IC[011]:355 
IC[012]:355 IC[013]:355 IC[014]:365 IC[015]:365 IC[016]:375 IC[017]:375 
IC[018]:375 IC[019]:375 IC[020]:365 IC[021]:365 IC[022]:355 IC[023]:355 
IC[024]:355 IC[025]:355 IC[026]:365 IC[027]:365 IC[028]:375 IC[029]:375 
IC[030]:375 IC[031]:375 IC[032]:365 IC[033]:365 IC[034]:355 IC[035]:355 
IC[036]:355 IC[037]:355 IC[038]:365 IC[039]:365 IC[040]:375 IC[041]:375 
IC[042]:375 IC[043]:375 IC[044]:365 IC[045]:365 IC[046]:355 IC[047]:355 
IC[048]:355 IC[049]:355 IC[050]:365 IC[051]:365 IC[052]:375 IC[053]:375 
IC[054]:375 IC[055]:375 IC[056]:365 IC[057]:365 IC[058]:355 IC[059]:355 
IC[060]:355 IC[061]:355 IC[062]:365 IC[063]:365 IC[064]:375 IC[065]:375 
IC[066]:375 IC[067]:375 IC[068]:365 IC[069]:365 IC[070]:355 IC[071]:355 
voltage in mode2: 18.20 V
hash rate in mode2: 06692 GH/s

2021-11-21 15:24:24 eeprom.c:840:travel_eeprom_store: chain[3] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:260 IC[001]:250 IC[002]:240 IC[003]:260 IC[004]:260 IC[005]:260 
IC[006]:260 IC[007]:240 IC[008]:260 IC[009]:260 IC[010]:250 IC[011]:260 
IC[012]:260 IC[013]:260 IC[014]:260 IC[015]:250 IC[016]:260 IC[017]:240 
IC[018]:250 IC[019]:240 IC[020]:260 IC[021]:260 IC[022]:260 IC[023]:260 
IC[024]:260 IC[025]:250 IC[026]:260 IC[027]:260 IC[028]:260 IC[029]:240 
IC[030]:260 IC[031]:250 IC[032]:240 IC[033]:260 IC[034]:260 IC[035]:260 
IC[036]:260 IC[037]:260 IC[038]:250 IC[039]:260 IC[040]:260 IC[041]:240 
IC[042]:240 IC[043]:260 IC[044]:260 IC[045]:250 IC[046]:260 IC[047]:260 
IC[048]:260 IC[049]:260 IC[050]:260 IC[051]:250 IC[052]:240 IC[053]:260 
IC[054]:260 IC[055]:240 IC[056]:260 IC[057]:250 IC[058]:260 IC[059]:260 
IC[060]:260 IC[061]:260 IC[062]:260 IC[063]:250 IC[064]:260 IC[065]:240 
IC[066]:240 IC[067]:260 IC[068]:260 IC[069]:250 IC[070]:260 IC[071]:260 
voltage: 16.50 V
hash rate: 04661 GH/s

freq data per ASIC in mode2:
IC[000]:395 IC[001]:395 IC[002]:395 IC[003]:395 IC[004]:395 IC[005]:395 
IC[006]:395 IC[007]:395 IC[008]:395 IC[009]:395 IC[010]:395 IC[011]:395 
IC[012]:395 IC[013]:395 IC[014]:395 IC[015]:395 IC[016]:395 IC[017]:395 
IC[018]:395 IC[019]:395 IC[020]:395 IC[021]:395 IC[022]:395 IC[023]:395 
IC[024]:395 IC[025]:395 IC[026]:395 IC[027]:395 IC[028]:395 IC[029]:395 
IC[030]:395 IC[031]:395 IC[032]:395 IC[033]:395 IC[034]:395 IC[035]:395 
IC[036]:395 IC[037]:395 IC[038]:395 IC[039]:395 IC[040]:395 IC[041]:395 
IC[042]:395 IC[043]:395 IC[044]:395 IC[045]:395 IC[046]:395 IC[047]:395 
IC[048]:395 IC[049]:395 IC[050]:395 IC[051]:395 IC[052]:395 IC[053]:395 
IC[054]:395 IC[055]:395 IC[056]:395 IC[057]:395 IC[058]:395 IC[059]:395 
IC[060]:395 IC[061]:395 IC[062]:395 IC[063]:395 IC[064]:395 IC[065]:395 
IC[066]:395 IC[067]:395 IC[068]:395 IC[069]:395 IC[070]:395 IC[071]:395 
voltage in mode2: 18.20 V
hash rate in mode2: 07264 GH/s

2021-11-21 15:24:25 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-11-21 15:24:25 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-11-21 15:24:28 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-11-21 15:24:31 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 15:24:31 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-11-21 15:24:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:24:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 15:24:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:24:32 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 15:24:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:24:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 15:24:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:24:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 15:24:34 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-11-21 15:24:37 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-11-21 15:24:40 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 72
2021-11-21 15:24:41 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-11-21 15:24:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-11-21 15:24:44 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-11-21 15:24:47 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 15:24:47 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-11-21 15:24:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:24:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 15:24:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:24:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 15:24:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:24:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 15:24:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:24:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 15:24:50 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-11-21 15:24:53 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-11-21 15:24:56 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 72
2021-11-21 15:24:56 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2021-11-21 15:24:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-11-21 15:24:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 15:25:02 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 15:25:02 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2021-11-21 15:25:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 15:25:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 15:25:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 15:25:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 15:25:05 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-11-21 15:25:08 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 15:25:12 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 72
2021-11-21 15:25:12 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=3!
2021-11-21 15:25:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 15:25:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:25:18 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 15:25:18 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 3
2021-11-21 15:25:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:19 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 15:25:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 15:25:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 15:25:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 15:25:21 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 15:25:24 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:25:27 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 3, find asic num = 72
2021-11-21 15:25:27 driver-btm-soc.c:7238:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num.
2021-11-21 15:25:27 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 0
2021-11-21 15:25:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:28 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 15:25:28 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 15:25:31 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:25:34 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 1
2021-11-21 15:25:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 15:25:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 15:25:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:25:41 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 2
2021-11-21 15:25:41 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 15:25:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 15:25:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:25:48 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 3
2021-11-21 15:25:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:25:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 15:25:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 15:25:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:25:54 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 0
2021-11-21 15:25:54 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 15:25:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 15:25:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 15:25:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:26:02 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 1
2021-11-21 15:26:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 15:26:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 15:26:03 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 15:26:06 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:26:09 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 2
2021-11-21 15:26:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 15:26:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 15:26:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 15:26:14 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:26:17 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 3
2021-11-21 15:26:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 15:26:18 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 15:26:18 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 15:26:21 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:26:24 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 0
2021-11-21 15:26:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 15:26:27 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 15:26:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 15:26:30 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:26:33 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 1
2021-11-21 15:26:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 15:26:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 15:26:36 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 15:26:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:26:42 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 2
2021-11-21 15:26:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 15:26:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 15:26:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 15:26:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:26:51 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 3
2021-11-21 15:26:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 15:26:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 15:26:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 15:26:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 15:27:19 driver-btm-soc.c:7475:calculate_timeout: dev->timeout = 642
2021-11-21 15:27:19 driver-btm-soc.c:3012:set_baud: set baud=1
2021-11-21 15:27:19 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 15:27:19 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 15:27:19 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 15:27:19 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 15:27:19 driver-btm-soc.c:3023:set_baud: read bc write is 0x83001a
2021-11-21 15:27:19 driver-btm-soc.c:4076:set_clock_delay_control: core_data = 0x04
2021-11-21 15:27:19 driver-btm-soc.c:8293:bitmain_soc_init: Open 1/4 core for reading temperature.
2021-11-21 15:27:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 15:27:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 15:27:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 15:27:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 15:27:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 15:27:22 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 15:27:22 temperature.c:422:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 15:27:22 temperature.c:448:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98
2021-11-21 15:27:22 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 15:27:22 temperature.c:531:calibration_sensor_offset: Warning: Chain[0] has no temp info ! we will fix it
2021-11-21 15:27:22 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 15:27:22 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[17] 
2021-11-21 15:27:23 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 15:27:23 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 15:27:23 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[12] 
2021-11-21 15:27:24 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 15:27:24 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 15:27:24 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[53] 
2021-11-21 15:27:25 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 15:27:25 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 15:27:25 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[48] 
2021-11-21 15:27:26 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 15:27:26 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 15:27:26 temperature.c:422:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 15:27:26 temperature.c:448:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98
2021-11-21 15:27:26 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 15:27:26 temperature.c:531:calibration_sensor_offset: Warning: Chain[1] has no temp info ! we will fix it
2021-11-21 15:27:26 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 15:27:26 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[17] 
2021-11-21 15:27:27 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 15:27:27 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 15:27:27 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[12] 
2021-11-21 15:27:28 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 15:27:28 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 15:27:28 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[53] 
2021-11-21 15:27:29 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 15:27:29 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 15:27:29 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[48] 
2021-11-21 15:27:30 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 15:27:30 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 15:27:30 temperature.c:422:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 15:27:30 temperature.c:448:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98
2021-11-21 15:27:30 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 15:27:30 temperature.c:531:calibration_sensor_offset: Warning: Chain[2] has no temp info ! we will fix it
2021-11-21 15:27:30 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 15:27:30 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[17] 
2021-11-21 15:27:31 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 15:27:31 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 15:27:31 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[12] 
2021-11-21 15:27:32 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 15:27:32 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 15:27:32 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[53] 
2021-11-21 15:27:33 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 15:27:33 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 15:27:33 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[48] 
2021-11-21 15:27:34 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 15:27:34 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 15:27:34 temperature.c:422:calibration_sensor_offset: chain[3] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 15:27:34 temperature.c:448:calibration_sensor_offset: chain[3] temp chip I2C addr=0x98
2021-11-21 15:27:34 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 15:27:34 temperature.c:531:calibration_sensor_offset: Warning: Chain[3] has no temp info ! we will fix it
2021-11-21 15:27:34 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 15:27:34 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[17] 
2021-11-21 15:27:35 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 15:27:35 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 15:27:35 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[12] 
2021-11-21 15:27:36 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 15:27:36 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 15:27:36 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[53] 
2021-11-21 15:27:37 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 15:27:37 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 15:27:37 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[48] 
2021-11-21 15:27:38 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 15:27:42 temperature.c:589:do_calibration_temperature_sensor: bring up lowest temperature is 21
ENV 19 FAN 5280
2021-11-21 15:27:51 driver-btm-soc.c:8298:bitmain_soc_init: Boot environment temperature is 19
2021-11-21 15:27:51 driver-btm-soc.c:8308:bitmain_soc_init: set TICKET_MASK
2021-11-21 15:27:51 driver-btm-soc.c:4130:open_core_bm1391: Start Open Core!!
2021-11-21 15:28:02 driver-btm-soc.c:4202:open_core_bm1391: End Open Core!!
2021-11-21 15:28:02 freq_tuning.c:312:freq_tuning_get_max_freq: Max freq of tuning is 425
ENV 19 FAN 5220
2021-11-21 15:28:02 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 19.20 ...
2021-11-21 15:28:02 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[25] = 19.870924
2021-11-21 15:28:02 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.000000 
2021-11-21 15:28:03 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[33] = 19.737439
2021-11-21 15:28:03 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.870924 
2021-11-21 15:28:04 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[41] = 19.603953
2021-11-21 15:28:04 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.737439 
2021-11-21 15:28:05 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[49] = 19.470467
2021-11-21 15:28:05 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.603953 
2021-11-21 15:28:06 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[57] = 19.336982
2021-11-21 15:28:06 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.470467 
2021-11-21 15:28:07 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[59] = 19.303610
2021-11-21 15:28:07 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.336982 
2021-11-21 15:28:08 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[61] = 19.270239
2021-11-21 15:28:08 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.303610 
2021-11-21 15:28:09 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[63] = 19.236867
2021-11-21 15:28:09 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.270239 
2021-11-21 15:28:10 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[64] = 19.220182
2021-11-21 15:28:10 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.236867 
2021-11-21 15:28:11 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[65] = 19.203496
2021-11-21 15:28:11 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.220182 
2021-11-21 15:28:12 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 395
2021-11-21 15:28:12 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 15:28:13 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 15:28:14 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 15:28:15 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 15:28:17 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 15:28:18 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 15:28:19 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 15:28:20 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 15:28:21 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 15:28:22 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 15:28:23 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 15:28:24 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 395.00M
2021-11-21 15:28:25 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 380
2021-11-21 15:28:25 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 15:28:26 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 15:28:27 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 15:28:28 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 15:28:29 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 15:28:30 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 15:28:31 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 15:28:32 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 15:28:33 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 15:28:34 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 15:28:36 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 15:28:37 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 380.00M
2021-11-21 15:28:42 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 355
2021-11-21 15:28:42 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 15:28:43 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 15:28:44 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 15:28:45 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 15:28:46 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 15:28:47 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 15:28:48 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 15:28:49 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 15:28:50 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 15:28:51 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 15:28:52 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 355.00M
2021-11-21 15:28:56 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 3. to 395
2021-11-21 15:28:56 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 15:28:58 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 15:28:59 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 15:29:00 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 15:29:01 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 15:29:02 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 15:29:03 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 15:29:04 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 15:29:05 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 15:29:06 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 15:29:07 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 15:29:08 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 395.00M
2021-11-21 15:29:09 driver-btm-soc.c:6051:set_timeout: freq 395 final timeout=447
ENV 19 FAN 5340
2021-11-21 15:29:09 freq_tuning.c:621:freq_tuning_prepare_works: Fail to open test pattern file /dev/91602_pattern_72.txt.
2021-11-21 15:29:09 freq_tuning.c:3090:do_pre_test_for_user_mode: Pre-test cost 0s.
2021-11-21 15:29:10 power.c:458:get_chain_voltage: chain[0], voltage is: 17.91 
2021-11-21 15:29:11 power.c:458:get_chain_voltage: chain[1], voltage is: 17.86 
2021-11-21 15:29:11 power.c:458:get_chain_voltage: chain[2], voltage is: 17.89 
2021-11-21 15:29:12 power.c:458:get_chain_voltage: chain[3], voltage is: 17.90 
2021-11-21 15:29:12 power.c:482:get_average_voltage: average  voltage is: 17.89 
2021-11-21 15:29:12 driver-btm-soc.c:8387:bitmain_soc_init: Init done!
2021-11-21 15:29:12 driver-btm-soc.c:8389:bitmain_soc_init: ideal_hash_rate_fixed 28000
2021-11-21 15:29:12 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 15:29:12 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 15:29:13 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 15:29:13 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 15:29:13 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-21 15:29:13 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-21 15:29:13 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 25
2021-11-21 15:29:39 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 15:29:41 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 15:29:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 15:29:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 15:29:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 15:29:47 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 15:29:49 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 15:29:51 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 15:29:53 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 15:29:54 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 15:29:56 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 15:29:58 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 15:32:48 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 15:32:48 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 15:32:48 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 15:33:25 driver-btm-soc.c:8823:send_job: Version num 2
ENV 13 FAN 5220
ENV 10 FAN 5220
ENV 10 FAN 5280
ENV 13 FAN 5220
2021-11-21 15:53:44 util.c:2200:process_version_mask: Pool 0 Verion num is 2
ENV 13 FAN 5280
2021-11-21 15:59:01 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 15:59:01 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 15:59:01 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 15:59:01 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 15:59:01 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 15:59:01 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 15:59:01 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 15:59:17 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-21 15:59:59 driver-btm-soc.c:3731:check_system_work: The avg rate is 27997 in 30 mins, PCB temperature between 29 ~ 58 ideal_hash_rate_fixed 28000
ENV 13 FAN 5280
ENV 9 FAN 5280
2021-11-21 16:05:05 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 19.70 ...
2021-11-21 16:05:05 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[60] = 19.286924
2021-11-21 16:05:05 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.200000 
2021-11-21 16:05:06 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[55] = 19.370353
2021-11-21 16:05:06 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.286924 
2021-11-21 16:05:07 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[50] = 19.453782
2021-11-21 16:05:07 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.370353 
2021-11-21 16:05:08 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[45] = 19.537210
2021-11-21 16:05:08 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.453782 
2021-11-21 16:05:08 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[40] = 19.620639
2021-11-21 16:05:09 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.537210 
2021-11-21 16:05:09 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[38] = 19.654010
2021-11-21 16:05:10 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.620639 
2021-11-21 16:05:11 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[36] = 19.687382
2021-11-21 16:05:11 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.654010 
2021-11-21 16:05:12 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[35] = 19.704067
2021-11-21 16:05:12 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.687382 
ENV 10 FAN 5340
ENV 10 FAN 5280
ENV 10 FAN 5280
ENV 9 FAN 5220
2021-11-21 16:26:53 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-21 16:30:39 driver-btm-soc.c:3731:check_system_work: The avg rate is 28185 in 30 mins, PCB temperature between 29 ~ 59 ideal_hash_rate_fixed 28000
ENV 10 FAN 5340
2021-11-21 16:32:07 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 16:32:08 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 16:32:08 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 16:32:52 driver-btm-soc.c:8823:send_job: Version num 2
ENV 10 FAN 5280
ENV 12 FAN 5340
ENV 13 FAN 5340
ENV 10 FAN 5340
2021-11-21 16:50:59 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.0.
ENV 10 FAN 5280
2021-11-21 17:01:09 driver-btm-soc.c:3731:check_system_work: The avg rate is 28141 in 30 mins, PCB temperature between 29 ~ 60 ideal_hash_rate_fixed 28000
ENV 10 FAN 5220
2021-11-21 17:03:19 util.c:2200:process_version_mask: Pool 0 Verion num is 2
ENV 13 FAN 5340
2021-11-21 17:08:38 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 17:08:38 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 17:08:38 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 17:08:38 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 17:08:38 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 17:08:50 driver-btm-soc.c:8823:send_job: Version num 2
ENV 12 FAN 5280
ENV 15 FAN 5280
2021-11-21 17:16:25 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 19.20 ...
2021-11-21 17:16:25 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[40] = 19.620639
2021-11-21 17:16:25 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.700000 
2021-11-21 17:16:25 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[45] = 19.537210
2021-11-21 17:16:26 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.620639 
2021-11-21 17:16:26 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[50] = 19.453782
2021-11-21 17:16:27 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.537210 
2021-11-21 17:16:28 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[55] = 19.370353
2021-11-21 17:16:28 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.453782 
2021-11-21 17:16:29 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[60] = 19.286924
2021-11-21 17:16:29 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.370353 
2021-11-21 17:16:30 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[62] = 19.253553
2021-11-21 17:16:30 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.286924 
2021-11-21 17:16:31 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[64] = 19.220182
2021-11-21 17:16:31 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.253553 
2021-11-21 17:16:32 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[65] = 19.203496
2021-11-21 17:16:32 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.220182 
ENV 13 FAN 5340
ENV 12 FAN 5280
2021-11-21 17:26:58 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-21 17:31:48 driver-btm-soc.c:3731:check_system_work: The avg rate is 28100 in 30 mins, PCB temperature between 30 ~ 56 ideal_hash_rate_fixed 28000
ENV 15 FAN 5280
2021-11-21 17:31:48 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.3.
2021-11-21 17:32:15 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 17:32:15 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 17:32:15 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 17:32:15 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 17:32:15 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 17:32:15 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 17:32:15 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 17:32:28 driver-btm-soc.c:8823:send_job: Version num 2
ENV 15 FAN 5340
ENV 13 FAN 5280
ENV 17 FAN 5280
2021-11-21 17:47:04 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.2.
ENV 13 FAN 5340
2021-11-21 17:53:26 util.c:2200:process_version_mask: Pool 0 Verion num is 2
ENV 13 FAN 5280
2021-11-21 17:57:14 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.3.
2021-11-21 17:58:42 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 17:58:42 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 17:58:42 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 17:58:57 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-21 18:02:19 driver-btm-soc.c:3731:check_system_work: The avg rate is 27965 in 30 mins, PCB temperature between 28 ~ 57 ideal_hash_rate_fixed 28000
ENV 12 FAN 5280
ENV 15 FAN 5340
ENV 13 FAN 5340
2021-11-21 18:12:29 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.2.
ENV 10 FAN 5220
2021-11-21 18:17:34 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.0.
ENV 13 FAN 5340
ENV 17 FAN 5280
2021-11-21 18:27:44 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.4.
2021-11-21 18:32:03 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-21 18:32:49 driver-btm-soc.c:3731:check_system_work: The avg rate is 28188 in 30 mins, PCB temperature between 30 ~ 59 ideal_hash_rate_fixed 28000
ENV 15 FAN 5280
2021-11-21 18:37:20 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 18:37:20 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 18:37:20 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 18:37:20 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 18:37:20 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 18:37:23 driver-btm-soc.c:8823:send_job: Version num 2
ENV 18 FAN 5280
ENV 15 FAN 5220
ENV 13 FAN 5340
2021-11-21 18:48:05 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.0.
ENV 17 FAN 5280
2021-11-21 18:53:10 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.0.
ENV 18 FAN 5280
2021-11-21 19:03:20 driver-btm-soc.c:3731:check_system_work: The avg rate is 28078 in 30 mins, PCB temperature between 32 ~ 61 ideal_hash_rate_fixed 28000
ENV 18 FAN 5340
2021-11-21 19:06:20 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 19:06:31 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:06:34 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:06:37 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:06:41 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:06:44 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:06:47 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:06:51 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:06:54 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:06:57 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:07:00 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:07:04 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:07:07 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:07:10 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:07:13 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:07:17 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:07:20 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:07:23 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:07:27 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:07:30 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:07:33 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:07:36 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 19:07:40 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 19:07:43 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
ENV 18 FAN 5340
2021-11-21 19:08:56 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 19:08:56 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 19:08:56 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 19:08:56 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 19:08:56 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 19:08:56 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 19:09:03 driver-btm-soc.c:8823:send_job: Version num 2
ENV 18 FAN 5340
ENV 18 FAN 5340
ENV 18 FAN 5340
ENV 18 FAN 5280
2021-11-21 19:33:20 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 19:33:51 driver-btm-soc.c:3731:check_system_work: The avg rate is 22131 in 30 mins, PCB temperature between 32 ~ 61 ideal_hash_rate_fixed 28000
2021-11-21 19:33:51 driver-btm-soc.c:3743:check_system_work: In 30 mins, the avg rate is lower than min target.
ENV 18 FAN 5280
2021-11-21 19:33:51 driver-btm-soc.c:3747:check_system_work: Unknown reason, the avg rate is falling, lastet rate is 22131 in 30 mins, reboot!
2021-11-21 19:34:08 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-11-21 19:34:08 driver-btm-soc.c:8125:bitmain_soc_init: S15
2021-11-21 19:34:08 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-11-21 19:34:08 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-11-21 19:34:08 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-11-21 19:34:08 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-11-21 19:34:08 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-11-21 19:34:08 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-11-21 19:34:08 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:35:07 CST 2019 type: Antminer S15
2021-11-21 19:34:08 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:40:49
2021-11-21 19:34:08 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-11-21 19:34:10 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8102f54e57408854
2021-11-21 19:34:10 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-11-21 19:34:10 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0xf
2021-11-21 19:34:10 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-11-21 19:34:10 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2021-11-21 19:34:10 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-11-21 19:34:10 driver-btm-soc.c:1104:check_chain: !! chain[3]is exist
2021-11-21 19:34:20 eeprom.c:1418:eeprom_load: done
2021-11-21 19:34:20 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0100
2021-11-21 19:34:20 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0103
2021-11-21 19:34:20 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0100
2021-11-21 19:34:20 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0103
2021-11-21 19:34:20 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0100
2021-11-21 19:34:20 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0103
2021-11-21 19:34:20 driver-btm-soc.c:7431:init_pcb_version: chain[3] PCB Version : 0x0100
2021-11-21 19:34:20 driver-btm-soc.c:7449:init_pcb_version: chain[3] BOM Version : 0x0103
2021-11-21 19:34:21 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-11-21 19:34:25 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-11-21 19:34:26 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2021-11-21 19:34:30 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2021-11-21 19:34:31 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2021-11-21 19:34:35 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2021-11-21 19:34:36 dspic33ep16gs202.c:538:reset_pic: chain[3] ok
2021-11-21 19:34:40 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[3] ok
2021-11-21 19:34:40 power.c:137:power_init: power init ... 
2021-11-21 19:34:40 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 3
2021-11-21 19:34:40 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2021-11-21 19:34:40 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2021-11-21 19:34:40 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2021-11-21 19:34:43 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-11-21 19:34:44 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-11-21 19:34:44 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2021-11-21 19:34:45 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=3!
2021-11-21 19:34:48 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2021-11-21 19:35:18 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 18.200000
2021-11-21 19:35:18 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 18.200000
2021-11-21 19:35:18 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 18.200000
2021-11-21 19:35:18 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[3] = 18.200000
2021-11-21 19:35:18 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 18.20, min = 18.20
2021-11-21 19:35:18 power.c:149:set_working_voltage: working_voltage = 18.200000
2021-11-21 19:35:18 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-11-21 19:35:18 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000 
2021-11-21 19:35:18 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:255 IC[001]:255 IC[002]:255 IC[003]:245 IC[004]:255 IC[005]:255 
IC[006]:245 IC[007]:255 IC[008]:255 IC[009]:255 IC[010]:255 IC[011]:255 
IC[012]:255 IC[013]:245 IC[014]:255 IC[015]:255 IC[016]:255 IC[017]:255 
IC[018]:255 IC[019]:255 IC[020]:255 IC[021]:255 IC[022]:245 IC[023]:255 
IC[024]:255 IC[025]:255 IC[026]:255 IC[027]:245 IC[028]:255 IC[029]:255 
IC[030]:245 IC[031]:255 IC[032]:255 IC[033]:255 IC[034]:255 IC[035]:255 
IC[036]:255 IC[037]:255 IC[038]:255 IC[039]:255 IC[040]:245 IC[041]:255 
IC[042]:255 IC[043]:255 IC[044]:255 IC[045]:255 IC[046]:245 IC[047]:255 
IC[048]:255 IC[049]:255 IC[050]:255 IC[051]:255 IC[052]:245 IC[053]:255 
IC[054]:255 IC[055]:255 IC[056]:255 IC[057]:245 IC[058]:255 IC[059]:255 
IC[060]:255 IC[061]:255 IC[062]:255 IC[063]:255 IC[064]:255 IC[065]:245 
IC[066]:255 IC[067]:255 IC[068]:255 IC[069]:255 IC[070]:245 IC[071]:255 
voltage: 16.50 V
hash rate: 04644 GH/s

freq data per ASIC in mode2:
IC[000]:395 IC[001]:395 IC[002]:395 IC[003]:395 IC[004]:395 IC[005]:395 
IC[006]:395 IC[007]:395 IC[008]:395 IC[009]:395 IC[010]:395 IC[011]:395 
IC[012]:395 IC[013]:395 IC[014]:395 IC[015]:395 IC[016]:395 IC[017]:395 
IC[018]:395 IC[019]:395 IC[020]:395 IC[021]:395 IC[022]:395 IC[023]:395 
IC[024]:395 IC[025]:395 IC[026]:395 IC[027]:395 IC[028]:395 IC[029]:395 
IC[030]:395 IC[031]:395 IC[032]:395 IC[033]:395 IC[034]:395 IC[035]:395 
IC[036]:395 IC[037]:395 IC[038]:395 IC[039]:395 IC[040]:395 IC[041]:395 
IC[042]:395 IC[043]:395 IC[044]:395 IC[045]:395 IC[046]:395 IC[047]:395 
IC[048]:395 IC[049]:395 IC[050]:395 IC[051]:395 IC[052]:395 IC[053]:395 
IC[054]:395 IC[055]:395 IC[056]:395 IC[057]:395 IC[058]:395 IC[059]:395 
IC[060]:395 IC[061]:395 IC[062]:395 IC[063]:395 IC[064]:395 IC[065]:395 
IC[066]:395 IC[067]:395 IC[068]:395 IC[069]:395 IC[070]:395 IC[071]:395 
voltage in mode2: 18.20 V
hash rate in mode2: 07268 GH/s

2021-11-21 19:35:18 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:240 IC[001]:230 IC[002]:240 IC[003]:240 IC[004]:240 IC[005]:240 
IC[006]:240 IC[007]:240 IC[008]:240 IC[009]:240 IC[010]:230 IC[011]:240 
IC[012]:240 IC[013]:240 IC[014]:240 IC[015]:240 IC[016]:240 IC[017]:230 
IC[018]:240 IC[019]:240 IC[020]:230 IC[021]:240 IC[022]:240 IC[023]:240 
IC[024]:240 IC[025]:240 IC[026]:240 IC[027]:240 IC[028]:240 IC[029]:230 
IC[030]:240 IC[031]:240 IC[032]:240 IC[033]:230 IC[034]:240 IC[035]:240 
IC[036]:240 IC[037]:240 IC[038]:240 IC[039]:240 IC[040]:240 IC[041]:230 
IC[042]:230 IC[043]:240 IC[044]:240 IC[045]:240 IC[046]:240 IC[047]:240 
IC[048]:240 IC[049]:240 IC[050]:240 IC[051]:240 IC[052]:240 IC[053]:230 
IC[054]:240 IC[055]:230 IC[056]:240 IC[057]:240 IC[058]:240 IC[059]:240 
IC[060]:240 IC[061]:240 IC[062]:240 IC[063]:230 IC[064]:240 IC[065]:240 
IC[066]:240 IC[067]:240 IC[068]:240 IC[069]:230 IC[070]:240 IC[071]:240 
voltage: 16.50 V
hash rate: 04355 GH/s

freq data per ASIC in mode2:
IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:380 
IC[006]:380 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 
IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:380 
IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:380 
IC[024]:385 IC[025]:385 IC[026]:380 IC[027]:385 IC[028]:385 IC[029]:385 
IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:380 IC[034]:385 IC[035]:385 
IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:380 
IC[042]:380 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 
IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:380 
IC[054]:385 IC[055]:380 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 
IC[060]:385 IC[061]:385 IC[062]:385 IC[063]:380 IC[064]:385 IC[065]:385 
IC[066]:385 IC[067]:385 IC[068]:385 IC[069]:380 IC[070]:385 IC[071]:385 
voltage in mode2: 18.20 V
hash rate in mode2: 07041 GH/s

2021-11-21 19:35:18 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:230 IC[001]:240 IC[002]:240 IC[003]:240 IC[004]:240 IC[005]:240 
IC[006]:240 IC[007]:240 IC[008]:240 IC[009]:240 IC[010]:240 IC[011]:230 
IC[012]:240 IC[013]:240 IC[014]:230 IC[015]:240 IC[016]:240 IC[017]:240 
IC[018]:240 IC[019]:230 IC[020]:240 IC[021]:240 IC[022]:240 IC[023]:240 
IC[024]:240 IC[025]:240 IC[026]:240 IC[027]:240 IC[028]:240 IC[029]:230 
IC[030]:240 IC[031]:240 IC[032]:240 IC[033]:240 IC[034]:240 IC[035]:230 
IC[036]:240 IC[037]:240 IC[038]:240 IC[039]:240 IC[040]:240 IC[041]:230 
IC[042]:230 IC[043]:240 IC[044]:240 IC[045]:240 IC[046]:240 IC[047]:240 
IC[048]:240 IC[049]:240 IC[050]:240 IC[051]:240 IC[052]:240 IC[053]:230 
IC[054]:230 IC[055]:240 IC[056]:240 IC[057]:240 IC[058]:240 IC[059]:240 
IC[060]:240 IC[061]:230 IC[062]:240 IC[063]:240 IC[064]:240 IC[065]:240 
IC[066]:230 IC[067]:240 IC[068]:240 IC[069]:240 IC[070]:240 IC[071]:240 
voltage: 16.50 V
hash rate: 04356 GH/s

freq data per ASIC in mode2:
IC[000]:355 IC[001]:355 IC[002]:365 IC[003]:365 IC[004]:375 IC[005]:375 
IC[006]:375 IC[007]:375 IC[008]:365 IC[009]:365 IC[010]:355 IC[011]:355 
IC[012]:355 IC[013]:355 IC[014]:365 IC[015]:365 IC[016]:375 IC[017]:375 
IC[018]:375 IC[019]:375 IC[020]:365 IC[021]:365 IC[022]:355 IC[023]:355 
IC[024]:355 IC[025]:355 IC[026]:365 IC[027]:365 IC[028]:375 IC[029]:375 
IC[030]:375 IC[031]:375 IC[032]:365 IC[033]:365 IC[034]:355 IC[035]:355 
IC[036]:355 IC[037]:355 IC[038]:365 IC[039]:365 IC[040]:375 IC[041]:375 
IC[042]:375 IC[043]:375 IC[044]:365 IC[045]:365 IC[046]:355 IC[047]:355 
IC[048]:355 IC[049]:355 IC[050]:365 IC[051]:365 IC[052]:375 IC[053]:375 
IC[054]:375 IC[055]:375 IC[056]:365 IC[057]:365 IC[058]:355 IC[059]:355 
IC[060]:355 IC[061]:355 IC[062]:365 IC[063]:365 IC[064]:375 IC[065]:375 
IC[066]:375 IC[067]:375 IC[068]:365 IC[069]:365 IC[070]:355 IC[071]:355 
voltage in mode2: 18.20 V
hash rate in mode2: 06692 GH/s

2021-11-21 19:35:18 eeprom.c:840:travel_eeprom_store: chain[3] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:260 IC[001]:250 IC[002]:240 IC[003]:260 IC[004]:260 IC[005]:260 
IC[006]:260 IC[007]:240 IC[008]:260 IC[009]:260 IC[010]:250 IC[011]:260 
IC[012]:260 IC[013]:260 IC[014]:260 IC[015]:250 IC[016]:260 IC[017]:240 
IC[018]:250 IC[019]:240 IC[020]:260 IC[021]:260 IC[022]:260 IC[023]:260 
IC[024]:260 IC[025]:250 IC[026]:260 IC[027]:260 IC[028]:260 IC[029]:240 
IC[030]:260 IC[031]:250 IC[032]:240 IC[033]:260 IC[034]:260 IC[035]:260 
IC[036]:260 IC[037]:260 IC[038]:250 IC[039]:260 IC[040]:260 IC[041]:240 
IC[042]:240 IC[043]:260 IC[044]:260 IC[045]:250 IC[046]:260 IC[047]:260 
IC[048]:260 IC[049]:260 IC[050]:260 IC[051]:250 IC[052]:240 IC[053]:260 
IC[054]:260 IC[055]:240 IC[056]:260 IC[057]:250 IC[058]:260 IC[059]:260 
IC[060]:260 IC[061]:260 IC[062]:260 IC[063]:250 IC[064]:260 IC[065]:240 
IC[066]:240 IC[067]:260 IC[068]:260 IC[069]:250 IC[070]:260 IC[071]:260 
voltage: 16.50 V
hash rate: 04661 GH/s

freq data per ASIC in mode2:
IC[000]:395 IC[001]:395 IC[002]:395 IC[003]:395 IC[004]:395 IC[005]:395 
IC[006]:395 IC[007]:395 IC[008]:395 IC[009]:395 IC[010]:395 IC[011]:395 
IC[012]:395 IC[013]:395 IC[014]:395 IC[015]:395 IC[016]:395 IC[017]:395 
IC[018]:395 IC[019]:395 IC[020]:395 IC[021]:395 IC[022]:395 IC[023]:395 
IC[024]:395 IC[025]:395 IC[026]:395 IC[027]:395 IC[028]:395 IC[029]:395 
IC[030]:395 IC[031]:395 IC[032]:395 IC[033]:395 IC[034]:395 IC[035]:395 
IC[036]:395 IC[037]:395 IC[038]:395 IC[039]:395 IC[040]:395 IC[041]:395 
IC[042]:395 IC[043]:395 IC[044]:395 IC[045]:395 IC[046]:395 IC[047]:395 
IC[048]:395 IC[049]:395 IC[050]:395 IC[051]:395 IC[052]:395 IC[053]:395 
IC[054]:395 IC[055]:395 IC[056]:395 IC[057]:395 IC[058]:395 IC[059]:395 
IC[060]:395 IC[061]:395 IC[062]:395 IC[063]:395 IC[064]:395 IC[065]:395 
IC[066]:395 IC[067]:395 IC[068]:395 IC[069]:395 IC[070]:395 IC[071]:395 
voltage in mode2: 18.20 V
hash rate in mode2: 07264 GH/s

2021-11-21 19:35:19 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-11-21 19:35:19 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 19:35:22 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:35:25 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 19:35:25 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-11-21 19:35:25 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 19:35:26 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 19:35:26 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:27 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 19:35:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:28 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 19:35:28 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 19:35:31 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:35:34 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 72
2021-11-21 19:35:35 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-11-21 19:35:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 19:35:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:35:41 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 19:35:41 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-11-21 19:35:41 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 19:35:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 19:35:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 19:35:43 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:44 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 19:35:44 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 19:35:47 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:35:50 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 72
2021-11-21 19:35:51 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2021-11-21 19:35:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 19:35:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:35:57 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 19:35:57 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2021-11-21 19:35:57 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:57 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 19:35:57 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 19:35:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:35:59 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 19:35:59 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:00 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 19:36:00 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 19:36:03 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:36:06 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 72
2021-11-21 19:36:07 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=3!
2021-11-21 19:36:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 19:36:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:36:13 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 19:36:13 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 3
2021-11-21 19:36:13 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:13 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 19:36:13 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 19:36:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 19:36:15 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 19:36:16 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 19:36:19 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:36:22 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 3, find asic num = 72
2021-11-21 19:36:22 driver-btm-soc.c:7238:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num.
2021-11-21 19:36:22 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 0
2021-11-21 19:36:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 19:36:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 19:36:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:36:29 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 1
2021-11-21 19:36:29 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:29 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 19:36:29 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 19:36:32 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:36:35 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 2
2021-11-21 19:36:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 19:36:36 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 19:36:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:36:42 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 3
2021-11-21 19:36:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:36:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 19:36:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 19:36:46 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:36:49 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 0
2021-11-21 19:36:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 19:36:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 19:36:50 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 19:36:53 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:36:56 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 1
2021-11-21 19:36:56 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 19:36:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 19:36:58 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 19:37:01 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:37:04 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 2
2021-11-21 19:37:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 19:37:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 19:37:05 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 19:37:08 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:37:11 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 3
2021-11-21 19:37:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 19:37:12 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 19:37:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 19:37:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:37:18 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 0
2021-11-21 19:37:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 19:37:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 19:37:21 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 19:37:24 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:37:27 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 1
2021-11-21 19:37:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 19:37:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 19:37:30 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 19:37:33 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:37:36 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 2
2021-11-21 19:37:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 19:37:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 19:37:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 19:37:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:37:45 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 3
2021-11-21 19:37:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 19:37:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 19:37:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 19:37:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 19:38:13 driver-btm-soc.c:7475:calculate_timeout: dev->timeout = 642
2021-11-21 19:38:13 driver-btm-soc.c:3012:set_baud: set baud=1
2021-11-21 19:38:13 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 19:38:13 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 19:38:13 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 19:38:13 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 19:38:13 driver-btm-soc.c:3023:set_baud: read bc write is 0x83001a
2021-11-21 19:38:13 driver-btm-soc.c:4076:set_clock_delay_control: core_data = 0x04
2021-11-21 19:38:13 driver-btm-soc.c:8293:bitmain_soc_init: Open 1/4 core for reading temperature.
2021-11-21 19:38:13 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 19:38:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 19:38:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 19:38:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 19:38:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 19:38:16 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 19:38:16 temperature.c:422:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 19:38:16 temperature.c:448:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98
2021-11-21 19:38:16 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 19:38:16 temperature.c:531:calibration_sensor_offset: Warning: Chain[0] has no temp info ! we will fix it
2021-11-21 19:38:16 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 19:38:17 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[17] 
2021-11-21 19:38:17 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 19:38:17 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 19:38:18 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[12] 
2021-11-21 19:38:18 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 19:38:18 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 19:38:19 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[53] 
2021-11-21 19:38:19 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 19:38:19 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 19:38:20 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[48] 
2021-11-21 19:38:20 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 19:38:20 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 19:38:20 temperature.c:422:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 19:38:20 temperature.c:448:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98
2021-11-21 19:38:20 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 19:38:20 temperature.c:531:calibration_sensor_offset: Warning: Chain[1] has no temp info ! we will fix it
2021-11-21 19:38:20 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 19:38:21 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[17] 
2021-11-21 19:38:21 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 19:38:21 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 19:38:22 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[12] 
2021-11-21 19:38:22 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 19:38:22 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 19:38:23 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[53] 
2021-11-21 19:38:23 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 19:38:23 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 19:38:24 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[48] 
2021-11-21 19:38:24 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 19:38:24 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 19:38:24 temperature.c:422:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 19:38:24 temperature.c:448:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98
2021-11-21 19:38:24 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 19:38:24 temperature.c:531:calibration_sensor_offset: Warning: Chain[2] has no temp info ! we will fix it
2021-11-21 19:38:24 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 19:38:25 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[17] 
2021-11-21 19:38:25 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 19:38:25 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 19:38:26 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[12] 
2021-11-21 19:38:26 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 19:38:26 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 19:38:26 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[53] 
2021-11-21 19:38:27 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 19:38:27 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 19:38:27 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[48] 
2021-11-21 19:38:28 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 19:38:28 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 19:38:28 temperature.c:422:calibration_sensor_offset: chain[3] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 19:38:28 temperature.c:448:calibration_sensor_offset: chain[3] temp chip I2C addr=0x98
2021-11-21 19:38:28 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 19:38:28 temperature.c:531:calibration_sensor_offset: Warning: Chain[3] has no temp info ! we will fix it
2021-11-21 19:38:28 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 19:38:28 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[17] 
2021-11-21 19:38:29 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 19:38:29 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 19:38:29 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[12] 
2021-11-21 19:38:30 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 19:38:30 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 19:38:30 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[53] 
2021-11-21 19:38:31 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 19:38:31 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 19:38:31 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[48] 
2021-11-21 19:38:32 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 19:38:36 temperature.c:589:do_calibration_temperature_sensor: bring up lowest temperature is 22
ENV 22 FAN 5280
2021-11-21 19:38:46 driver-btm-soc.c:8298:bitmain_soc_init: Boot environment temperature is 22
2021-11-21 19:38:46 driver-btm-soc.c:8308:bitmain_soc_init: set TICKET_MASK
2021-11-21 19:38:46 driver-btm-soc.c:4130:open_core_bm1391: Start Open Core!!
2021-11-21 19:38:56 driver-btm-soc.c:4202:open_core_bm1391: End Open Core!!
2021-11-21 19:38:56 freq_tuning.c:312:freq_tuning_get_max_freq: Max freq of tuning is 425
ENV 22 FAN 5280
2021-11-21 19:38:56 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.20 ...
2021-11-21 19:38:56 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[35] = 19.704067
2021-11-21 19:38:56 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.000000 
2021-11-21 19:38:57 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[53] = 19.403724
2021-11-21 19:38:57 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.704067 
2021-11-21 19:38:58 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[71] = 19.103382
2021-11-21 19:38:58 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.403724 
2021-11-21 19:38:59 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[89] = 18.803039
2021-11-21 19:38:59 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.103382 
2021-11-21 19:39:00 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[107] = 18.502696
2021-11-21 19:39:00 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.803039 
2021-11-21 19:39:01 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[115] = 18.369210
2021-11-21 19:39:01 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.502696 
2021-11-21 19:39:02 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[117] = 18.335839
2021-11-21 19:39:02 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.369210 
2021-11-21 19:39:03 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[119] = 18.302467
2021-11-21 19:39:03 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.335839 
2021-11-21 19:39:04 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[121] = 18.269096
2021-11-21 19:39:04 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.302467 
2021-11-21 19:39:05 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[123] = 18.235724
2021-11-21 19:39:06 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.269096 
2021-11-21 19:39:07 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[124] = 18.219039
2021-11-21 19:39:07 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.235724 
2021-11-21 19:39:08 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[125] = 18.202353
2021-11-21 19:39:08 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.219039 
2021-11-21 19:39:09 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 395
2021-11-21 19:39:09 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 19:39:10 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 19:39:11 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 19:39:12 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 19:39:13 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 19:39:14 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 19:39:15 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 19:39:16 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 19:39:17 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 19:39:18 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 19:39:19 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 19:39:20 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 395.00M
2021-11-21 19:39:21 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 380
2021-11-21 19:39:21 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 19:39:22 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 19:39:23 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 19:39:25 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 19:39:26 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 19:39:27 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 19:39:28 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 19:39:29 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 19:39:30 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 19:39:31 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 19:39:32 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 19:39:33 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 380.00M
2021-11-21 19:39:38 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 355
2021-11-21 19:39:38 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 19:39:39 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 19:39:40 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 19:39:41 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 19:39:42 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 19:39:43 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 19:39:44 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 19:39:45 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 19:39:46 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 19:39:47 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 19:39:49 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 355.00M
2021-11-21 19:39:53 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 3. to 395
2021-11-21 19:39:53 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 19:39:54 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 19:39:55 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 19:39:56 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 19:39:57 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 19:39:58 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 19:39:59 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 19:40:00 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 19:40:01 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 19:40:02 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 19:40:03 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 19:40:04 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 395.00M
2021-11-21 19:40:06 driver-btm-soc.c:6051:set_timeout: freq 395 final timeout=447
ENV 22 FAN 5280
2021-11-21 19:40:06 freq_tuning.c:621:freq_tuning_prepare_works: Fail to open test pattern file /dev/91602_pattern_72.txt.
2021-11-21 19:40:06 freq_tuning.c:3090:do_pre_test_for_user_mode: Pre-test cost 0s.
2021-11-21 19:40:07 power.c:458:get_chain_voltage: chain[0], voltage is: 18.89 
2021-11-21 19:40:07 power.c:458:get_chain_voltage: chain[1], voltage is: 18.83 
2021-11-21 19:40:08 power.c:458:get_chain_voltage: chain[2], voltage is: 18.83 
2021-11-21 19:40:08 power.c:458:get_chain_voltage: chain[3], voltage is: 18.84 
2021-11-21 19:40:08 power.c:482:get_average_voltage: average  voltage is: 18.85 
2021-11-21 19:40:08 driver-btm-soc.c:8387:bitmain_soc_init: Init done!
2021-11-21 19:40:08 driver-btm-soc.c:8389:bitmain_soc_init: ideal_hash_rate_fixed 28000
2021-11-21 19:40:08 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 19:40:08 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 19:40:09 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-21 19:40:10 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 26
2021-11-21 19:40:36 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 19:40:37 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 19:40:39 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 19:40:40 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 19:40:43 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 19:40:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 19:40:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 19:40:48 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 19:40:49 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 19:40:51 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 19:40:53 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 19:40:55 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
ENV 21 FAN 5280
ENV 21 FAN 5280
ENV 21 FAN 5340
ENV 21 FAN 5340
ENV 21 FAN 5340
2021-11-21 20:09:09 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-21 20:10:55 driver-btm-soc.c:3731:check_system_work: The avg rate is 28380 in 30 mins, PCB temperature between 33 ~ 59 ideal_hash_rate_fixed 28000
ENV 22 FAN 5280
2021-11-21 20:14:20 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 20:14:20 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 20:14:20 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 20:14:29 driver-btm-soc.c:8823:send_job: Version num 2
ENV 22 FAN 5340
ENV 22 FAN 5340
ENV 22 FAN 5340
ENV 22 FAN 5280
2021-11-21 20:31:41 util.c:2200:process_version_mask: Pool 0 Verion num is 2
ENV 24 FAN 5340
2021-11-21 20:36:58 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 20:36:58 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 20:36:58 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 20:36:58 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 20:36:58 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 20:36:58 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 20:36:58 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 20:37:36 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-21 20:41:26 driver-btm-soc.c:3731:check_system_work: The avg rate is 28265 in 30 mins, PCB temperature between 34 ~ 61 ideal_hash_rate_fixed 28000
ENV 23 FAN 5340
ENV 23 FAN 5340
ENV 23 FAN 5340
ENV 23 FAN 5340
ENV 23 FAN 5280
ENV 23 FAN 5280
2021-11-21 21:11:56 driver-btm-soc.c:3731:check_system_work: The avg rate is 28556 in 30 mins, PCB temperature between 34 ~ 61 ideal_hash_rate_fixed 28000
ENV 23 FAN 5280
ENV 23 FAN 5280
2021-11-21 21:19:04 util.c:2200:process_version_mask: Pool 0 Verion num is 2
ENV 23 FAN 5340
2021-11-21 21:24:18 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 21:24:18 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 21:24:18 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 21:24:18 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 21:24:18 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 21:24:31 driver-btm-soc.c:8823:send_job: Version num 2
ENV 24 FAN 5340
ENV 24 FAN 5340
ENV 24 FAN 5340
2021-11-21 21:42:27 driver-btm-soc.c:3731:check_system_work: The avg rate is 28275 in 30 mins, PCB temperature between 34 ~ 62 ideal_hash_rate_fixed 28000
ENV 23 FAN 5340
ENV 23 FAN 5340
ENV 23 FAN 5340
ENV 24 FAN 5340
2021-11-21 22:00:59 util.c:2200:process_version_mask: Pool 0 Verion num is 2
ENV 24 FAN 5340
2021-11-21 22:06:14 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 22:06:14 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 22:06:14 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 22:06:14 driver-btm-soc.c:8823:send_job: Version num 2
ENV 23 FAN 5280
2021-11-21 22:12:57 driver-btm-soc.c:3731:check_system_work: The avg rate is 28362 in 30 mins, PCB temperature between 35 ~ 61 ideal_hash_rate_fixed 28000
ENV 24 FAN 5340
ENV 24 FAN 5340
ENV 24 FAN 5340
ENV 24 FAN 5280
ENV 24 FAN 5340
ENV 24 FAN 5340
2021-11-21 22:38:55 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-21 22:43:28 driver-btm-soc.c:3731:check_system_work: The avg rate is 28271 in 30 mins, PCB temperature between 36 ~ 63 ideal_hash_rate_fixed 28000
ENV 25 FAN 5280
2021-11-21 22:44:13 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 22:44:13 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 22:44:13 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-21 22:44:13 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 22:44:13 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 22:44:13 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 22:44:13 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 22:44:45 driver-btm-soc.c:8823:send_job: Version num 2
ENV 24 FAN 5340
ENV 24 FAN 5340
ENV 24 FAN 5340
ENV 24 FAN 5340
ENV 24 FAN 5340
2021-11-21 23:13:58 driver-btm-soc.c:3731:check_system_work: The avg rate is 28245 in 30 mins, PCB temperature between 35 ~ 62 ideal_hash_rate_fixed 28000
ENV 24 FAN 5280
ENV 24 FAN 5280
ENV 24 FAN 5340
2021-11-21 23:27:51 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-21 23:27:55 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:27:58 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:01 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:05 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:08 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:11 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:15 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:18 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:21 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:24 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:28 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:31 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:34 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:38 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:41 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:44 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:47 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:51 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:28:54 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:28:57 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:29:00 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-21 23:29:04 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-21 23:29:07 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
ENV 24 FAN 5340
2021-11-21 23:30:40 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 23:30:40 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 23:30:57 driver-btm-soc.c:8823:send_job: Version num 2
ENV 24 FAN 5340
ENV 24 FAN 5340
2021-11-21 23:44:29 driver-btm-soc.c:3731:check_system_work: The avg rate is 24551 in 30 mins, PCB temperature between 35 ~ 62 ideal_hash_rate_fixed 28000
2021-11-21 23:44:29 driver-btm-soc.c:3743:check_system_work: In 30 mins, the avg rate is lower than min target.
ENV 24 FAN 5340
2021-11-21 23:44:29 driver-btm-soc.c:3747:check_system_work: Unknown reason, the avg rate is falling, lastet rate is 24551 in 30 mins, reboot!
2021-11-21 23:44:40 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-11-21 23:44:40 driver-btm-soc.c:8125:bitmain_soc_init: S15
2021-11-21 23:44:40 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-11-21 23:44:40 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-11-21 23:44:40 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-11-21 23:44:40 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-11-21 23:44:40 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-11-21 23:44:40 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-11-21 23:44:40 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:35:07 CST 2019 type: Antminer S15
2021-11-21 23:44:40 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:40:49
2021-11-21 23:44:40 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-11-21 23:44:42 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8102f54e57408854
2021-11-21 23:44:42 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-11-21 23:44:42 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0xf
2021-11-21 23:44:42 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-11-21 23:44:42 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2021-11-21 23:44:42 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-11-21 23:44:42 driver-btm-soc.c:1104:check_chain: !! chain[3]is exist
2021-11-21 23:44:52 eeprom.c:1418:eeprom_load: done
2021-11-21 23:44:52 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0100
2021-11-21 23:44:52 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0103
2021-11-21 23:44:52 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0100
2021-11-21 23:44:52 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0103
2021-11-21 23:44:52 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0100
2021-11-21 23:44:52 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0103
2021-11-21 23:44:52 driver-btm-soc.c:7431:init_pcb_version: chain[3] PCB Version : 0x0100
2021-11-21 23:44:52 driver-btm-soc.c:7449:init_pcb_version: chain[3] BOM Version : 0x0103
2021-11-21 23:44:53 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-11-21 23:44:57 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-11-21 23:44:58 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2021-11-21 23:45:02 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2021-11-21 23:45:03 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2021-11-21 23:45:07 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2021-11-21 23:45:08 dspic33ep16gs202.c:538:reset_pic: chain[3] ok
2021-11-21 23:45:12 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[3] ok
2021-11-21 23:45:12 power.c:137:power_init: power init ... 
2021-11-21 23:45:12 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 3
2021-11-21 23:45:12 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2021-11-21 23:45:12 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2021-11-21 23:45:12 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2021-11-21 23:45:15 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-11-21 23:45:16 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-11-21 23:45:16 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2021-11-21 23:45:17 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=3!
2021-11-21 23:45:20 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2021-11-21 23:45:50 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 18.200000
2021-11-21 23:45:50 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 18.200000
2021-11-21 23:45:50 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 18.200000
2021-11-21 23:45:50 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[3] = 18.200000
2021-11-21 23:45:50 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 18.20, min = 18.20
2021-11-21 23:45:50 power.c:149:set_working_voltage: working_voltage = 18.200000
2021-11-21 23:45:50 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-11-21 23:45:50 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000 
2021-11-21 23:45:50 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:255 IC[001]:255 IC[002]:255 IC[003]:245 IC[004]:255 IC[005]:255 
IC[006]:245 IC[007]:255 IC[008]:255 IC[009]:255 IC[010]:255 IC[011]:255 
IC[012]:255 IC[013]:245 IC[014]:255 IC[015]:255 IC[016]:255 IC[017]:255 
IC[018]:255 IC[019]:255 IC[020]:255 IC[021]:255 IC[022]:245 IC[023]:255 
IC[024]:255 IC[025]:255 IC[026]:255 IC[027]:245 IC[028]:255 IC[029]:255 
IC[030]:245 IC[031]:255 IC[032]:255 IC[033]:255 IC[034]:255 IC[035]:255 
IC[036]:255 IC[037]:255 IC[038]:255 IC[039]:255 IC[040]:245 IC[041]:255 
IC[042]:255 IC[043]:255 IC[044]:255 IC[045]:255 IC[046]:245 IC[047]:255 
IC[048]:255 IC[049]:255 IC[050]:255 IC[051]:255 IC[052]:245 IC[053]:255 
IC[054]:255 IC[055]:255 IC[056]:255 IC[057]:245 IC[058]:255 IC[059]:255 
IC[060]:255 IC[061]:255 IC[062]:255 IC[063]:255 IC[064]:255 IC[065]:245 
IC[066]:255 IC[067]:255 IC[068]:255 IC[069]:255 IC[070]:245 IC[071]:255 
voltage: 16.50 V
hash rate: 04644 GH/s

freq data per ASIC in mode2:
IC[000]:395 IC[001]:395 IC[002]:395 IC[003]:395 IC[004]:395 IC[005]:395 
IC[006]:395 IC[007]:395 IC[008]:395 IC[009]:395 IC[010]:395 IC[011]:395 
IC[012]:395 IC[013]:395 IC[014]:395 IC[015]:395 IC[016]:395 IC[017]:395 
IC[018]:395 IC[019]:395 IC[020]:395 IC[021]:395 IC[022]:395 IC[023]:395 
IC[024]:395 IC[025]:395 IC[026]:395 IC[027]:395 IC[028]:395 IC[029]:395 
IC[030]:395 IC[031]:395 IC[032]:395 IC[033]:395 IC[034]:395 IC[035]:395 
IC[036]:395 IC[037]:395 IC[038]:395 IC[039]:395 IC[040]:395 IC[041]:395 
IC[042]:395 IC[043]:395 IC[044]:395 IC[045]:395 IC[046]:395 IC[047]:395 
IC[048]:395 IC[049]:395 IC[050]:395 IC[051]:395 IC[052]:395 IC[053]:395 
IC[054]:395 IC[055]:395 IC[056]:395 IC[057]:395 IC[058]:395 IC[059]:395 
IC[060]:395 IC[061]:395 IC[062]:395 IC[063]:395 IC[064]:395 IC[065]:395 
IC[066]:395 IC[067]:395 IC[068]:395 IC[069]:395 IC[070]:395 IC[071]:395 
voltage in mode2: 18.20 V
hash rate in mode2: 07268 GH/s

2021-11-21 23:45:50 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:240 IC[001]:230 IC[002]:240 IC[003]:240 IC[004]:240 IC[005]:240 
IC[006]:240 IC[007]:240 IC[008]:240 IC[009]:240 IC[010]:230 IC[011]:240 
IC[012]:240 IC[013]:240 IC[014]:240 IC[015]:240 IC[016]:240 IC[017]:230 
IC[018]:240 IC[019]:240 IC[020]:230 IC[021]:240 IC[022]:240 IC[023]:240 
IC[024]:240 IC[025]:240 IC[026]:240 IC[027]:240 IC[028]:240 IC[029]:230 
IC[030]:240 IC[031]:240 IC[032]:240 IC[033]:230 IC[034]:240 IC[035]:240 
IC[036]:240 IC[037]:240 IC[038]:240 IC[039]:240 IC[040]:240 IC[041]:230 
IC[042]:230 IC[043]:240 IC[044]:240 IC[045]:240 IC[046]:240 IC[047]:240 
IC[048]:240 IC[049]:240 IC[050]:240 IC[051]:240 IC[052]:240 IC[053]:230 
IC[054]:240 IC[055]:230 IC[056]:240 IC[057]:240 IC[058]:240 IC[059]:240 
IC[060]:240 IC[061]:240 IC[062]:240 IC[063]:230 IC[064]:240 IC[065]:240 
IC[066]:240 IC[067]:240 IC[068]:240 IC[069]:230 IC[070]:240 IC[071]:240 
voltage: 16.50 V
hash rate: 04355 GH/s

freq data per ASIC in mode2:
IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:380 
IC[006]:380 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 
IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:380 
IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:380 
IC[024]:385 IC[025]:385 IC[026]:380 IC[027]:385 IC[028]:385 IC[029]:385 
IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:380 IC[034]:385 IC[035]:385 
IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:380 
IC[042]:380 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 
IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:380 
IC[054]:385 IC[055]:380 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 
IC[060]:385 IC[061]:385 IC[062]:385 IC[063]:380 IC[064]:385 IC[065]:385 
IC[066]:385 IC[067]:385 IC[068]:385 IC[069]:380 IC[070]:385 IC[071]:385 
voltage in mode2: 18.20 V
hash rate in mode2: 07041 GH/s

2021-11-21 23:45:50 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:230 IC[001]:240 IC[002]:240 IC[003]:240 IC[004]:240 IC[005]:240 
IC[006]:240 IC[007]:240 IC[008]:240 IC[009]:240 IC[010]:240 IC[011]:230 
IC[012]:240 IC[013]:240 IC[014]:230 IC[015]:240 IC[016]:240 IC[017]:240 
IC[018]:240 IC[019]:230 IC[020]:240 IC[021]:240 IC[022]:240 IC[023]:240 
IC[024]:240 IC[025]:240 IC[026]:240 IC[027]:240 IC[028]:240 IC[029]:230 
IC[030]:240 IC[031]:240 IC[032]:240 IC[033]:240 IC[034]:240 IC[035]:230 
IC[036]:240 IC[037]:240 IC[038]:240 IC[039]:240 IC[040]:240 IC[041]:230 
IC[042]:230 IC[043]:240 IC[044]:240 IC[045]:240 IC[046]:240 IC[047]:240 
IC[048]:240 IC[049]:240 IC[050]:240 IC[051]:240 IC[052]:240 IC[053]:230 
IC[054]:230 IC[055]:240 IC[056]:240 IC[057]:240 IC[058]:240 IC[059]:240 
IC[060]:240 IC[061]:230 IC[062]:240 IC[063]:240 IC[064]:240 IC[065]:240 
IC[066]:230 IC[067]:240 IC[068]:240 IC[069]:240 IC[070]:240 IC[071]:240 
voltage: 16.50 V
hash rate: 04356 GH/s

freq data per ASIC in mode2:
IC[000]:355 IC[001]:355 IC[002]:365 IC[003]:365 IC[004]:375 IC[005]:375 
IC[006]:375 IC[007]:375 IC[008]:365 IC[009]:365 IC[010]:355 IC[011]:355 
IC[012]:355 IC[013]:355 IC[014]:365 IC[015]:365 IC[016]:375 IC[017]:375 
IC[018]:375 IC[019]:375 IC[020]:365 IC[021]:365 IC[022]:355 IC[023]:355 
IC[024]:355 IC[025]:355 IC[026]:365 IC[027]:365 IC[028]:375 IC[029]:375 
IC[030]:375 IC[031]:375 IC[032]:365 IC[033]:365 IC[034]:355 IC[035]:355 
IC[036]:355 IC[037]:355 IC[038]:365 IC[039]:365 IC[040]:375 IC[041]:375 
IC[042]:375 IC[043]:375 IC[044]:365 IC[045]:365 IC[046]:355 IC[047]:355 
IC[048]:355 IC[049]:355 IC[050]:365 IC[051]:365 IC[052]:375 IC[053]:375 
IC[054]:375 IC[055]:375 IC[056]:365 IC[057]:365 IC[058]:355 IC[059]:355 
IC[060]:355 IC[061]:355 IC[062]:365 IC[063]:365 IC[064]:375 IC[065]:375 
IC[066]:375 IC[067]:375 IC[068]:365 IC[069]:365 IC[070]:355 IC[071]:355 
voltage in mode2: 18.20 V
hash rate in mode2: 06692 GH/s

2021-11-21 23:45:50 eeprom.c:840:travel_eeprom_store: chain[3] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:260 IC[001]:250 IC[002]:240 IC[003]:260 IC[004]:260 IC[005]:260 
IC[006]:260 IC[007]:240 IC[008]:260 IC[009]:260 IC[010]:250 IC[011]:260 
IC[012]:260 IC[013]:260 IC[014]:260 IC[015]:250 IC[016]:260 IC[017]:240 
IC[018]:250 IC[019]:240 IC[020]:260 IC[021]:260 IC[022]:260 IC[023]:260 
IC[024]:260 IC[025]:250 IC[026]:260 IC[027]:260 IC[028]:260 IC[029]:240 
IC[030]:260 IC[031]:250 IC[032]:240 IC[033]:260 IC[034]:260 IC[035]:260 
IC[036]:260 IC[037]:260 IC[038]:250 IC[039]:260 IC[040]:260 IC[041]:240 
IC[042]:240 IC[043]:260 IC[044]:260 IC[045]:250 IC[046]:260 IC[047]:260 
IC[048]:260 IC[049]:260 IC[050]:260 IC[051]:250 IC[052]:240 IC[053]:260 
IC[054]:260 IC[055]:240 IC[056]:260 IC[057]:250 IC[058]:260 IC[059]:260 
IC[060]:260 IC[061]:260 IC[062]:260 IC[063]:250 IC[064]:260 IC[065]:240 
IC[066]:240 IC[067]:260 IC[068]:260 IC[069]:250 IC[070]:260 IC[071]:260 
voltage: 16.50 V
hash rate: 04661 GH/s

freq data per ASIC in mode2:
IC[000]:395 IC[001]:395 IC[002]:395 IC[003]:395 IC[004]:395 IC[005]:395 
IC[006]:395 IC[007]:395 IC[008]:395 IC[009]:395 IC[010]:395 IC[011]:395 
IC[012]:395 IC[013]:395 IC[014]:395 IC[015]:395 IC[016]:395 IC[017]:395 
IC[018]:395 IC[019]:395 IC[020]:395 IC[021]:395 IC[022]:395 IC[023]:395 
IC[024]:395 IC[025]:395 IC[026]:395 IC[027]:395 IC[028]:395 IC[029]:395 
IC[030]:395 IC[031]:395 IC[032]:395 IC[033]:395 IC[034]:395 IC[035]:395 
IC[036]:395 IC[037]:395 IC[038]:395 IC[039]:395 IC[040]:395 IC[041]:395 
IC[042]:395 IC[043]:395 IC[044]:395 IC[045]:395 IC[046]:395 IC[047]:395 
IC[048]:395 IC[049]:395 IC[050]:395 IC[051]:395 IC[052]:395 IC[053]:395 
IC[054]:395 IC[055]:395 IC[056]:395 IC[057]:395 IC[058]:395 IC[059]:395 
IC[060]:395 IC[061]:395 IC[062]:395 IC[063]:395 IC[064]:395 IC[065]:395 
IC[066]:395 IC[067]:395 IC[068]:395 IC[069]:395 IC[070]:395 IC[071]:395 
voltage in mode2: 18.20 V
hash rate in mode2: 07264 GH/s

2021-11-21 23:45:51 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-11-21 23:45:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 23:45:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:45:57 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 23:45:57 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-11-21 23:45:57 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:45:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 23:45:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:45:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 23:45:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:45:59 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 23:45:59 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:00 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 23:46:00 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 23:46:03 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:46:06 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 72
2021-11-21 23:46:07 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-11-21 23:46:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 23:46:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:46:13 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 23:46:13 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-11-21 23:46:13 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 23:46:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 23:46:15 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 23:46:16 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 23:46:16 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 23:46:19 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:46:23 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 72
2021-11-21 23:46:23 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2021-11-21 23:46:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 23:46:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:46:29 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 23:46:29 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2021-11-21 23:46:29 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 23:46:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 23:46:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 23:46:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:32 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 23:46:32 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 23:46:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:46:38 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 72
2021-11-21 23:46:39 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=3!
2021-11-21 23:46:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 23:46:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:46:45 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-11-21 23:46:45 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 3
2021-11-21 23:46:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 23:46:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 23:46:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 23:46:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 23:46:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 23:46:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:46:54 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 3, find asic num = 72
2021-11-21 23:46:54 driver-btm-soc.c:7238:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num.
2021-11-21 23:46:54 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 0
2021-11-21 23:46:54 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:46:55 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 23:46:55 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 23:46:58 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:47:01 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 1
2021-11-21 23:47:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:47:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 23:47:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 23:47:05 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:47:08 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 2
2021-11-21 23:47:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:47:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 23:47:08 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 23:47:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:47:14 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 3
2021-11-21 23:47:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:47:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 23:47:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 23:47:18 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:47:21 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 0
2021-11-21 23:47:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 23:47:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 23:47:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 23:47:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:47:29 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 1
2021-11-21 23:47:29 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 23:47:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 23:47:30 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 23:47:33 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:47:36 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 2
2021-11-21 23:47:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 23:47:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 23:47:37 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 23:47:40 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:47:44 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 3
2021-11-21 23:47:44 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-11-21 23:47:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 23:47:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 23:47:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:47:51 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 0
2021-11-21 23:47:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 23:47:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 23:47:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-11-21 23:47:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:48:00 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 1
2021-11-21 23:48:00 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 23:48:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 23:48:03 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-11-21 23:48:06 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:48:09 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 2
2021-11-21 23:48:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 23:48:12 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 23:48:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-11-21 23:48:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:48:18 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 3
2021-11-21 23:48:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-11-21 23:48:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 23:48:21 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-11-21 23:48:24 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-11-21 23:48:46 driver-btm-soc.c:7475:calculate_timeout: dev->timeout = 642
2021-11-21 23:48:46 driver-btm-soc.c:3012:set_baud: set baud=1
2021-11-21 23:48:46 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 23:48:46 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 23:48:46 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 23:48:46 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-11-21 23:48:46 driver-btm-soc.c:3023:set_baud: read bc write is 0x83001a
2021-11-21 23:48:46 driver-btm-soc.c:4076:set_clock_delay_control: core_data = 0x04
2021-11-21 23:48:46 driver-btm-soc.c:8293:bitmain_soc_init: Open 1/4 core for reading temperature.
2021-11-21 23:48:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-11-21 23:48:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-11-21 23:48:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-11-21 23:48:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-11-21 23:48:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-11-21 23:48:49 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 23:48:49 temperature.c:422:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 23:48:49 temperature.c:448:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98
2021-11-21 23:48:49 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 23:48:49 temperature.c:531:calibration_sensor_offset: Warning: Chain[0] has no temp info ! we will fix it
2021-11-21 23:48:49 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 23:48:49 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[17] 
2021-11-21 23:48:50 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 23:48:50 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 23:48:50 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[12] 
2021-11-21 23:48:51 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 23:48:51 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 23:48:51 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[53] 
2021-11-21 23:48:52 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 23:48:52 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 23:48:52 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[48] 
2021-11-21 23:48:53 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 23:48:53 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 23:48:53 temperature.c:422:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 23:48:53 temperature.c:448:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98
2021-11-21 23:48:53 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 23:48:53 temperature.c:531:calibration_sensor_offset: Warning: Chain[1] has no temp info ! we will fix it
2021-11-21 23:48:53 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 23:48:53 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[17] 
2021-11-21 23:48:54 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 23:48:54 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 23:48:54 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[12] 
2021-11-21 23:48:55 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 23:48:55 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 23:48:55 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[53] 
2021-11-21 23:48:56 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 23:48:56 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 23:48:56 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[48] 
2021-11-21 23:48:57 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 23:48:57 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 23:48:57 temperature.c:422:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 23:48:57 temperature.c:448:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98
2021-11-21 23:48:57 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 23:48:57 temperature.c:531:calibration_sensor_offset: Warning: Chain[2] has no temp info ! we will fix it
2021-11-21 23:48:57 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 23:48:57 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[17] 
2021-11-21 23:48:58 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 23:48:58 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 23:48:58 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[12] 
2021-11-21 23:48:58 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 23:48:58 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 23:48:59 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[53] 
2021-11-21 23:48:59 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 23:48:59 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 23:49:00 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[48] 
2021-11-21 23:49:00 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 23:49:00 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 23:49:00 temperature.c:422:calibration_sensor_offset: chain[3] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-11-21 23:49:00 temperature.c:448:calibration_sensor_offset: chain[3] temp chip I2C addr=0x98
2021-11-21 23:49:00 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-11-21 23:49:00 temperature.c:531:calibration_sensor_offset: Warning: Chain[3] has no temp info ! we will fix it
2021-11-21 23:49:00 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-11-21 23:49:01 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[17] 
2021-11-21 23:49:01 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[17] get middle temp offset=-5 typeID=55
2021-11-21 23:49:01 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-11-21 23:49:02 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[12] 
2021-11-21 23:49:02 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[12] get middle temp offset=-5 typeID=55
2021-11-21 23:49:02 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-11-21 23:49:03 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[53] 
2021-11-21 23:49:03 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[53] get middle temp offset=-5 typeID=55
2021-11-21 23:49:03 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-11-21 23:49:04 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[48] 
2021-11-21 23:49:04 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[48] get middle temp offset=-5 typeID=55
2021-11-21 23:49:08 temperature.c:589:do_calibration_temperature_sensor: bring up lowest temperature is 25
ENV 25 FAN 5280
2021-11-21 23:49:18 driver-btm-soc.c:8298:bitmain_soc_init: Boot environment temperature is 25
2021-11-21 23:49:18 driver-btm-soc.c:8308:bitmain_soc_init: set TICKET_MASK
2021-11-21 23:49:18 driver-btm-soc.c:4130:open_core_bm1391: Start Open Core!!
2021-11-21 23:49:28 driver-btm-soc.c:4202:open_core_bm1391: End Open Core!!
2021-11-21 23:49:28 freq_tuning.c:312:freq_tuning_get_max_freq: Max freq of tuning is 425
ENV 25 FAN 5280
2021-11-21 23:49:28 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.20 ...
2021-11-21 23:49:28 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[35] = 19.704067
2021-11-21 23:49:29 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.000000 
2021-11-21 23:49:30 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[53] = 19.403724
2021-11-21 23:49:30 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.704067 
2021-11-21 23:49:31 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[71] = 19.103382
2021-11-21 23:49:31 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.403724 
2021-11-21 23:49:32 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[89] = 18.803039
2021-11-21 23:49:32 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.103382 
2021-11-21 23:49:33 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[107] = 18.502696
2021-11-21 23:49:33 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.803039 
2021-11-21 23:49:34 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[115] = 18.369210
2021-11-21 23:49:34 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.502696 
2021-11-21 23:49:35 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[117] = 18.335839
2021-11-21 23:49:35 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.369210 
2021-11-21 23:49:36 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[119] = 18.302467
2021-11-21 23:49:36 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.335839 
2021-11-21 23:49:37 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[121] = 18.269096
2021-11-21 23:49:37 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.302467 
2021-11-21 23:49:38 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[123] = 18.235724
2021-11-21 23:49:38 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.269096 
2021-11-21 23:49:39 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[124] = 18.219039
2021-11-21 23:49:39 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.235724 
2021-11-21 23:49:40 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[125] = 18.202353
2021-11-21 23:49:40 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.219039 
2021-11-21 23:49:41 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 395
2021-11-21 23:49:41 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 23:49:42 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 23:49:43 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 23:49:44 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 23:49:45 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 23:49:47 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 23:49:48 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 23:49:49 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 23:49:50 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 23:49:51 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 23:49:52 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 23:49:53 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 395.00M
2021-11-21 23:49:54 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 380
2021-11-21 23:49:54 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 23:49:55 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 23:49:56 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 23:49:57 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 23:49:58 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 23:49:59 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 23:50:00 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 23:50:01 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 23:50:02 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 23:50:03 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 23:50:04 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 23:50:06 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 380.00M
2021-11-21 23:50:11 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 355
2021-11-21 23:50:11 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 23:50:12 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 23:50:13 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 23:50:14 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 23:50:15 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 23:50:16 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 23:50:17 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 23:50:18 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 23:50:19 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 23:50:20 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 23:50:21 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 355.00M
2021-11-21 23:50:25 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 3. to 395
2021-11-21 23:50:25 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-11-21 23:50:26 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-11-21 23:50:28 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-11-21 23:50:29 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-11-21 23:50:30 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-11-21 23:50:31 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-11-21 23:50:32 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-11-21 23:50:33 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-11-21 23:50:34 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-11-21 23:50:35 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-11-21 23:50:36 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-11-21 23:50:37 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 395.00M
2021-11-21 23:50:38 driver-btm-soc.c:6051:set_timeout: freq 395 final timeout=447
ENV 25 FAN 5340
2021-11-21 23:50:38 freq_tuning.c:621:freq_tuning_prepare_works: Fail to open test pattern file /dev/91602_pattern_72.txt.
2021-11-21 23:50:38 freq_tuning.c:3090:do_pre_test_for_user_mode: Pre-test cost 0s.
2021-11-21 23:50:39 power.c:458:get_chain_voltage: chain[0], voltage is: 17.91 
2021-11-21 23:50:40 power.c:458:get_chain_voltage: chain[1], voltage is: 17.87 
2021-11-21 23:50:40 power.c:458:get_chain_voltage: chain[2], voltage is: 17.87 
2021-11-21 23:50:41 power.c:458:get_chain_voltage: chain[3], voltage is: 17.89 
2021-11-21 23:50:41 power.c:482:get_average_voltage: average  voltage is: 17.89 
2021-11-21 23:50:41 driver-btm-soc.c:8387:bitmain_soc_init: Init done!
2021-11-21 23:50:41 driver-btm-soc.c:8389:bitmain_soc_init: ideal_hash_rate_fixed 28000
2021-11-21 23:50:41 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 23:50:41 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-21 23:50:41 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 23:50:41 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-21 23:50:42 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-21 23:50:42 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 29
2021-11-21 23:51:08 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 23:51:10 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 23:51:11 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 23:51:13 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 23:51:15 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 23:51:17 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 23:51:19 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 23:51:20 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 23:51:22 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 23:51:24 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 23:51:26 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 23:51:28 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
ENV 23 FAN 5280
ENV 23 FAN 5340
2021-11-22 00:05:36 temperature.c:1126:update_error_status: Fatal Error: network connection lost!
2021-11-22 00:05:36 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2
2021-11-22 00:05:50 temperature.c:1126:update_error_status: Fatal Error: network connection lost!
2021-11-22 00:05:50 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2
2021-11-22 00:05:53 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-22 00:06:03 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:07 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:10 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:13 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:17 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:20 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:23 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:26 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:30 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:33 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:36 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:40 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:43 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:46 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:49 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:53 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:56 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:59 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:07:02 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:07:06 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:07:09 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:07:12 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:07:15 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:08:33 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-22 00:08:33 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-22 00:08:33 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 00:08:33 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 00:08:45 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-22 00:28:53 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-22 00:34:11 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-22 00:34:11 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-22 00:34:11 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-22 00:34:12 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 00:34:12 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 00:34:28 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-22 01:06:48 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-22 01:12:04 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-22 01:12:04 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-22 01:12:04 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-22 01:12:04 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-22 01:12:04 util.c:2200:process_version_mask: Pool 3 Verion num is 2
2021-11-22 01:12:05 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 01:12:05 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 01:12:12 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-22 01:38:55 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-22 01:44:11 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-22 01:44:11 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 01:44:11 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 01:44:18 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-22 02:20:22 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-22 02:25:40 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-22 02:25:40 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 02:25:40 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 02:26:08 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-22 02:46:16 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-11-22 02:51:34 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-22 02:51:34 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-22 02:51:34 util.c:2200:process_version_mask: Pool 2 Verion num is 2
2021-11-22 02:51:34 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 02:51:34 util.c:2200:process_version_mask: Pool 1 Verion num is 2
2021-11-22 02:51:39 driver-btm-soc.c:8823:send_job: Version num 2
 

 

Но также меня смущает история про вольтаж на платах тем, что есть такой кусок в логах, в котором одна и та же ошибка на всех платах, но при этом пропали (конкретно из данного лога) только 1 и 3 платы (ch 0 и ch 2 получается)

 

Скрытый текст

2021-11-21 23:50:42 driver-btm-soc.c:8823:send_job: Version num 2
2021-11-21 23:50:42 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 29
2021-11-21 23:51:08 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 23:51:10 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 23:51:11 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-11-21 23:51:13 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 23:51:15 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 23:51:17 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-11-21 23:51:19 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 23:51:20 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 23:51:22 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-11-21 23:51:24 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 23:51:26 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-11-21 23:51:28 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
ENV 23 FAN 5280
ENV 23 FAN 5340

 

Больше почему-то меня заинтересовал кусок лога, который пошел дальше - что-то про температуру, буфер и т.п.

Скрытый текст

2021-11-22 00:05:36 temperature.c:1126:update_error_status: Fatal Error: network connection lost!
2021-11-22 00:05:36 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2
2021-11-22 00:05:50 temperature.c:1126:update_error_status: Fatal Error: network connection lost!
2021-11-22 00:05:50 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2
2021-11-22 00:05:53 driver-btm-soc.c:8823:send_job: Version num 1
2021-11-22 00:06:03 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:07 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:10 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:13 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:17 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:20 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:23 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:26 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:30 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:33 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:36 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:40 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:43 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:46 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:49 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:53 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:06:56 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:06:59 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:07:02 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:07:06 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:07:09 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:07:12 chip1391.c:613:read_asic_register: Error: clement debug: wait BC ready timeout, PLUG ON=0x0000000f..
2021-11-22 00:07:15 znyq.c:438:set_BC_write_command: Error: set_BC_write_command wait buffer ready timeout!
2021-11-22 00:08:33 util.c:2200:process_version_mask: Pool 2 Verion num is 2

 

 

В общем очень надеюсь на помощь. Заранее благодарен!

 

Это я скидывал из лога Kernel los S1500CJ-2, но приложу и по двум другим S15 с аналогичной проблемой.

Kernel log S15014R.txt Kernel log S15028E.txt Kernel los S1500CJ-2.txt

Share this post


Link to post
Share on other sites
08.07.2020 в 15:28, Vlad_V сказал:

eeprom программатор за 5 минут из подручных материалов: Программатор CH341A цена 2$ шлейф от S9 бесплатно.

IMG_20200708_132040.thumb.jpg.63a5896f6fc4cfae3d74dd07d4345fc2.jpg

Доброго дня!

Если вас не затруднит можно распиновку данного девайса?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Topics

    • Ремонт: Antminer s17/t17

      Кто-нибудь ремонтировал хэшплаты Antminer T17 или S17? Долго ли они работают после ремонта? У меня вот такой опыт: Antminer T17 После почти что года работы на стандартной прошивке сдохла одна хэшплата. При инициализации определялись только 24 чипа из 30. Асик стоял на балконе в шумопоглощающем ящике, что продают на Авито. От ящика до балконного окна с антикомариной сеткой были проложены 2 алюминиевые гофры чтобы горячий воздух выдувался за борт. Зимой при морозах асик тоже о

      in ASIC/FPGA майнеры

    • Bitmain Antminer s9, s9k, s9j - 13,5-14,0 Th/s

      Частенько натыкаюсь на китайских поставщиков Antminer S9, предлагающих б/у машинки. Предложения самые разные, ну и размышления по этому поводу соответственно тоже. Интересно мнение форумчан - опыт таких покупок, ну и насколько это рискованно и оправдано.  

      in ASIC/FPGA майнеры

    • Antminer L3, L3+

      Доброй ночи! пожалуйста помогите кто знает с antminer l3+  работает 1.5 недели, все было хорошо.  В один момент вижу, что он выключен пришел его перезагрузил и началось   Вообщем выдает ошибку socket connect failed. connection refused то иногда включается и показывает на второй плате 21 чип место 71  много раз перезагружал, перекинул с другого асика блок питания он все равно так   не майнит уходит в ошибку   что делать подскажите пожалуйста, асику всего полторы недели скрины приложил

      in ASIC/FPGA майнеры

    • Новички bits.media - все сюда !

      Обновлено 15 марта 2017 Всем привет. Если вы зашли в эту тему значит либо вы еще не в "теме", либо в теме но хотите узнать что-то новое. Возможно вы услышали про биток в одной из многочисленных новостей или с форумов. А может даже пришли с грабительского Рублика. Этой темой я хочу разрешить регулярные вопросы, которые рано или поздно возникают у всех кто решил влится в тему заработка на криптовалютах. Я не буду останавливаться на технических подробностях, и потому что сам не до конца пон

      in Общий

    • Ремонт: Bitmain Antminer s7, s9, l3+

      Официальный сайт | Antminer. Все модели. Вопросы, помощь, обсуждение.   В теме действуют все Правила форума! Перед тем как задать вопрос, посмотрите НОВИЧКИ Bits.Media, все сюда Уважайте своё и чужое время. Для обсуждения и поиска программ/драйверов пользуйтесь разделом Файлы.   Статьи на bits.media:   Полезное:   (!) FAQ (часто задаваемые вопросы)   -Как найти в продаже разъемы питания, какая маркировка

      in ASIC/FPGA майнеры

×
×
  • Create New...