Antminer. Все модели

[Maksh]

Всем,привет.Может кто подсказать по поводу прошивки на тестер китайский для s17+ и t17e?

[Daddon]

Доброго всем! Подскажите как по SSH добраться до EEPROM хэшплаты? 

[nick555]

Доброго всем
помогите разобраться в чем корень проблемы
есть 2 асика S15
1 работает стабильно , 2 ой нет (отработал сутки стабильно, потом такое ощущение что постоянно перегружается )

на проблемном обновили прошивку, результата не дало...
лог прикрепляю, заранее благодарен за потраченное время

Скрытый текст

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 196092K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33284K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 20244K (cc73c000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 29/15, WL threshold: 4096, image sequence number: 2095256536
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 14CB8B0C-3A15-4FA0-BC06-0D1A80DB8D4B, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4404/2418, WL threshold: 4096, image sequence number: 1615795518
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 02A7F7F2-F6E7-470B-A537-D1878F1327D9, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
 [2021-05-05 17:21:57.323] start listen on 6060 ...
 [2021-05-05 17:27:34.175] set_start_time_point total_tv_start_sys=407 total_tv_end_sys=408

2021-05-05 17:21:27 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-05-05 17:21:27 driver-btm-soc.c:8125:bitmain_soc_init: S15
2021-05-05 17:21:27 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-05-05 17:21:27 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-05-05 17:21:27 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-05-05 17:21:27 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-05-05 17:21:27 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-05-05 17:21:27 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-05-05 17:21:27 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:35:07 CST 2019 type: Antminer S15
2021-05-05 17:21:27 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:40:49
2021-05-05 17:21:27 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-05-05 17:21:29 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 806ced0618c0885c
2021-05-05 17:21:29 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-05-05 17:21:29 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0xf
2021-05-05 17:21:29 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-05-05 17:21:29 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2021-05-05 17:21:29 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-05-05 17:21:29 driver-btm-soc.c:1104:check_chain: !! chain[3]is exist
2021-05-05 17:21:39 eeprom.c:1418:eeprom_load: done
2021-05-05 17:21:39 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0100
2021-05-05 17:21:39 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0103
2021-05-05 17:21:39 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0100
2021-05-05 17:21:39 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0103
2021-05-05 17:21:39 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0100
2021-05-05 17:21:39 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0103
2021-05-05 17:21:39 driver-btm-soc.c:7431:init_pcb_version: chain[3] PCB Version : 0x0100
2021-05-05 17:21:39 driver-btm-soc.c:7449:init_pcb_version: chain[3] BOM Version : 0x0103
2021-05-05 17:21:40 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-05-05 17:21:44 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-05-05 17:21:45 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2021-05-05 17:21:49 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2021-05-05 17:21:50 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2021-05-05 17:21:55 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2021-05-05 17:21:55 dspic33ep16gs202.c:538:reset_pic: chain[3] ok
2021-05-05 17:22:00 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[3] ok
2021-05-05 17:22:00 power.c:137:power_init: power init ... 
2021-05-05 17:22:00 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 3
2021-05-05 17:22:00 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2021-05-05 17:22:00 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2021-05-05 17:22:00 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2021-05-05 17:22:00 power.c:114:power_on: init gpio907
2021-05-05 17:22:02 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-05-05 17:22:03 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-05-05 17:22:04 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2021-05-05 17:22:04 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=3!
2021-05-05 17:22:07 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2021-05-05 17:22:37 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 18.000000
2021-05-05 17:22:37 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 18.000000
2021-05-05 17:22:37 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 18.000000
2021-05-05 17:22:37 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[3] = 18.000000
2021-05-05 17:22:37 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 18.00, min = 18.00
2021-05-05 17:22:37 power.c:149:set_working_voltage: working_voltage = 18.000000
2021-05-05 17:22:37 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-05-05 17:22:37 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000 
2021-05-05 17:22:38 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:245 IC[001]:245 IC[002]:245 IC[003]:245 IC[004]:235 IC[005]:245 
IC[006]:245 IC[007]:245 IC[008]:235 IC[009]:245 IC[010]:245 IC[011]:245 
IC[012]:245 IC[013]:245 IC[014]:245 IC[015]:245 IC[016]:245 IC[017]:235 
IC[018]:245 IC[019]:245 IC[020]:235 IC[021]:245 IC[022]:245 IC[023]:245 
IC[024]:245 IC[025]:245 IC[026]:245 IC[027]:245 IC[028]:235 IC[029]:245 
IC[030]:245 IC[031]:245 IC[032]:245 IC[033]:245 IC[034]:235 IC[035]:245 
IC[036]:245 IC[037]:245 IC[038]:235 IC[039]:245 IC[040]:245 IC[041]:245 
IC[042]:245 IC[043]:235 IC[044]:245 IC[045]:245 IC[046]:245 IC[047]:245 
IC[048]:245 IC[049]:245 IC[050]:245 IC[051]:245 IC[052]:235 IC[053]:245 
IC[054]:245 IC[055]:235 IC[056]:245 IC[057]:245 IC[058]:245 IC[059]:245 
IC[060]:245 IC[061]:245 IC[062]:245 IC[063]:245 IC[064]:245 IC[065]:235 
IC[066]:235 IC[067]:245 IC[068]:245 IC[069]:245 IC[070]:245 IC[071]:245 
voltage: 16.30 V
hash rate: 04433 GH/s

freq data per ASIC in mode2:
IC[000]:400 IC[001]:400 IC[002]:400 IC[003]:400 IC[004]:385 IC[005]:395 
IC[006]:400 IC[007]:395 IC[008]:385 IC[009]:400 IC[010]:400 IC[011]:400 
IC[012]:400 IC[013]:400 IC[014]:400 IC[015]:400 IC[016]:395 IC[017]:385 
IC[018]:395 IC[019]:400 IC[020]:385 IC[021]:400 IC[022]:400 IC[023]:400 
IC[024]:400 IC[025]:400 IC[026]:400 IC[027]:400 IC[028]:385 IC[029]:395 
IC[030]:400 IC[031]:400 IC[032]:400 IC[033]:400 IC[034]:395 IC[035]:385 
IC[036]:400 IC[037]:400 IC[038]:385 IC[039]:400 IC[040]:400 IC[041]:395 
IC[042]:400 IC[043]:385 IC[044]:395 IC[045]:400 IC[046]:400 IC[047]:400 
IC[048]:400 IC[049]:400 IC[050]:400 IC[051]:400 IC[052]:385 IC[053]:395 
IC[054]:385 IC[055]:395 IC[056]:400 IC[057]:400 IC[058]:400 IC[059]:400 
IC[060]:400 IC[061]:400 IC[062]:400 IC[063]:400 IC[064]:395 IC[065]:385 
IC[066]:385 IC[067]:400 IC[068]:395 IC[069]:400 IC[070]:400 IC[071]:400 
voltage in mode2: 18.00 V
hash rate in mode2: 07280 GH/s

2021-05-05 17:22:38 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:245 IC[001]:245 IC[002]:245 IC[003]:235 IC[004]:245 IC[005]:235 
IC[006]:235 IC[007]:245 IC[008]:235 IC[009]:245 IC[010]:245 IC[011]:245 
IC[012]:245 IC[013]:245 IC[014]:235 IC[015]:235 IC[016]:245 IC[017]:245 
IC[018]:235 IC[019]:245 IC[020]:235 IC[021]:245 IC[022]:245 IC[023]:245 
IC[024]:245 IC[025]:245 IC[026]:245 IC[027]:245 IC[028]:235 IC[029]:235 
IC[030]:245 IC[031]:245 IC[032]:245 IC[033]:235 IC[034]:235 IC[035]:245 
IC[036]:245 IC[037]:245 IC[038]:245 IC[039]:245 IC[040]:235 IC[041]:235 
IC[042]:235 IC[043]:235 IC[044]:245 IC[045]:245 IC[046]:245 IC[047]:245 
IC[048]:245 IC[049]:245 IC[050]:245 IC[051]:245 IC[052]:235 IC[053]:235 
IC[054]:235 IC[055]:245 IC[056]:235 IC[057]:245 IC[058]:245 IC[059]:245 
IC[060]:245 IC[061]:235 IC[062]:245 IC[063]:245 IC[064]:235 IC[065]:245 
IC[066]:245 IC[067]:245 IC[068]:235 IC[069]:245 IC[070]:235 IC[071]:245 
voltage: 16.30 V
hash rate: 04412 GH/s

freq data per ASIC in mode2:
IC[000]:390 IC[001]:390 IC[002]:390 IC[003]:390 IC[004]:390 IC[005]:385 
IC[006]:385 IC[007]:390 IC[008]:390 IC[009]:390 IC[010]:390 IC[011]:390 
IC[012]:390 IC[013]:390 IC[014]:385 IC[015]:390 IC[016]:390 IC[017]:390 
IC[018]:385 IC[019]:390 IC[020]:390 IC[021]:390 IC[022]:390 IC[023]:390 
IC[024]:390 IC[025]:390 IC[026]:390 IC[027]:390 IC[028]:390 IC[029]:385 
IC[030]:390 IC[031]:385 IC[032]:390 IC[033]:390 IC[034]:390 IC[035]:390 
IC[036]:390 IC[037]:390 IC[038]:390 IC[039]:390 IC[040]:390 IC[041]:385 
IC[042]:385 IC[043]:390 IC[044]:390 IC[045]:390 IC[046]:390 IC[047]:390 
IC[048]:390 IC[049]:390 IC[050]:390 IC[051]:390 IC[052]:390 IC[053]:385 
IC[054]:385 IC[055]:390 IC[056]:390 IC[057]:390 IC[058]:390 IC[059]:390 
IC[060]:390 IC[061]:390 IC[062]:390 IC[063]:390 IC[064]:385 IC[065]:390 
IC[066]:390 IC[067]:390 IC[068]:385 IC[069]:390 IC[070]:390 IC[071]:390 
voltage in mode2: 18.00 V
hash rate in mode2: 07115 GH/s

2021-05-05 17:22:38 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:245 IC[001]:245 IC[002]:245 IC[003]:245 IC[004]:245 IC[005]:225 
IC[006]:225 IC[007]:245 IC[008]:245 IC[009]:245 IC[010]:245 IC[011]:245 
IC[012]:245 IC[013]:245 IC[014]:245 IC[015]:225 IC[016]:245 IC[017]:245 
IC[018]:225 IC[019]:245 IC[020]:245 IC[021]:245 IC[022]:245 IC[023]:245 
IC[024]:245 IC[025]:245 IC[026]:245 IC[027]:245 IC[028]:245 IC[029]:225 
IC[030]:225 IC[031]:245 IC[032]:245 IC[033]:245 IC[034]:245 IC[035]:245 
IC[036]:245 IC[037]:245 IC[038]:245 IC[039]:245 IC[040]:245 IC[041]:225 
IC[042]:225 IC[043]:245 IC[044]:245 IC[045]:245 IC[046]:245 IC[047]:245 
IC[048]:245 IC[049]:245 IC[050]:245 IC[051]:245 IC[052]:245 IC[053]:225 
IC[054]:225 IC[055]:245 IC[056]:245 IC[057]:245 IC[058]:245 IC[059]:245 
IC[060]:245 IC[061]:245 IC[062]:225 IC[063]:245 IC[064]:245 IC[065]:245 
IC[066]:245 IC[067]:245 IC[068]:225 IC[069]:245 IC[070]:245 IC[071]:245 
voltage: 16.30 V
hash rate: 04401 GH/s

freq data per ASIC in mode2:
IC[000]:360 IC[001]:360 IC[002]:370 IC[003]:370 IC[004]:380 IC[005]:365 
IC[006]:365 IC[007]:380 IC[008]:370 IC[009]:370 IC[010]:360 IC[011]:360 
IC[012]:360 IC[013]:360 IC[014]:370 IC[015]:370 IC[016]:380 IC[017]:365 
IC[018]:365 IC[019]:380 IC[020]:370 IC[021]:370 IC[022]:360 IC[023]:360 
IC[024]:360 IC[025]:360 IC[026]:370 IC[027]:370 IC[028]:380 IC[029]:365 
IC[030]:365 IC[031]:380 IC[032]:370 IC[033]:370 IC[034]:360 IC[035]:360 
IC[036]:360 IC[037]:360 IC[038]:370 IC[039]:370 IC[040]:380 IC[041]:365 
IC[042]:365 IC[043]:380 IC[044]:370 IC[045]:370 IC[046]:360 IC[047]:360 
IC[048]:360 IC[049]:360 IC[050]:370 IC[051]:370 IC[052]:380 IC[053]:365 
IC[054]:365 IC[055]:380 IC[056]:370 IC[057]:370 IC[058]:360 IC[059]:360 
IC[060]:360 IC[061]:360 IC[062]:370 IC[063]:370 IC[064]:380 IC[065]:365 
IC[066]:365 IC[067]:380 IC[068]:370 IC[069]:370 IC[070]:360 IC[071]:360 
voltage in mode2: 18.00 V
hash rate in mode2: 06742 GH/s

2021-05-05 17:22:38 eeprom.c:840:travel_eeprom_store: chain[3] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:235 IC[001]:235 IC[002]:225 IC[003]:235 IC[004]:225 IC[005]:225 
IC[006]:235 IC[007]:235 IC[008]:235 IC[009]:225 IC[010]:225 IC[011]:225 
IC[012]:225 IC[013]:235 IC[014]:235 IC[015]:235 IC[016]:225 IC[017]:225 
IC[018]:225 IC[019]:225 IC[020]:225 IC[021]:235 IC[022]:235 IC[023]:235 
IC[024]:235 IC[025]:225 IC[026]:235 IC[027]:235 IC[028]:225 IC[029]:225 
IC[030]:225 IC[031]:235 IC[032]:225 IC[033]:225 IC[034]:235 IC[035]:235 
IC[036]:235 IC[037]:225 IC[038]:235 IC[039]:225 IC[040]:225 IC[041]:235 
IC[042]:235 IC[043]:235 IC[044]:235 IC[045]:225 IC[046]:225 IC[047]:225 
IC[048]:235 IC[049]:225 IC[050]:235 IC[051]:225 IC[052]:235 IC[053]:225 
IC[054]:225 IC[055]:225 IC[056]:235 IC[057]:235 IC[058]:225 IC[059]:235 
IC[060]:235 IC[061]:235 IC[062]:235 IC[063]:225 IC[064]:225 IC[065]:225 
IC[066]:235 IC[067]:225 IC[068]:235 IC[069]:235 IC[070]:225 IC[071]:225 
voltage: 16.30 V
hash rate: 04204 GH/s

freq data per ASIC in mode2:
IC[000]:395 IC[001]:385 IC[002]:375 IC[003]:395 IC[004]:395 IC[005]:395 
IC[006]:395 IC[007]:395 IC[008]:385 IC[009]:395 IC[010]:375 IC[011]:395 
IC[012]:395 IC[013]:395 IC[014]:395 IC[015]:395 IC[016]:385 IC[017]:375 
IC[018]:375 IC[019]:385 IC[020]:395 IC[021]:395 IC[022]:395 IC[023]:395 
IC[024]:395 IC[025]:395 IC[026]:385 IC[027]:395 IC[028]:395 IC[029]:375 
IC[030]:375 IC[031]:395 IC[032]:385 IC[033]:395 IC[034]:395 IC[035]:395 
IC[036]:395 IC[037]:395 IC[038]:395 IC[039]:395 IC[040]:385 IC[041]:375 
IC[042]:395 IC[043]:395 IC[044]:385 IC[045]:395 IC[046]:375 IC[047]:395 
IC[048]:395 IC[049]:395 IC[050]:395 IC[051]:385 IC[052]:395 IC[053]:375 
IC[054]:375 IC[055]:385 IC[056]:395 IC[057]:395 IC[058]:395 IC[059]:395 
IC[060]:395 IC[061]:395 IC[062]:395 IC[063]:395 IC[064]:385 IC[065]:375 
IC[066]:395 IC[067]:375 IC[068]:395 IC[069]:385 IC[070]:395 IC[071]:395 
voltage in mode2: 18.00 V
hash rate in mode2: 07156 GH/s

2021-05-05 17:22:38 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-05-05 17:22:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-05-05 17:22:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-05-05 17:22:44 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-05-05 17:22:44 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-05-05 17:22:44 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:22:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-05-05 17:22:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:22:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-05-05 17:22:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:22:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-05-05 17:22:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:22:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-05-05 17:22:47 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-05-05 17:22:50 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-05-05 17:22:53 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 72
2021-05-05 17:22:55 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-05-05 17:22:55 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-05-05 17:22:58 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-05-05 17:23:01 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-05-05 17:23:01 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-05-05 17:23:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-05-05 17:23:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-05-05 17:23:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-05-05 17:23:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-05-05 17:23:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-05-05 17:23:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-05-05 17:23:10 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 72
2021-05-05 17:23:10 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2021-05-05 17:23:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-05-05 17:23:13 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-05-05 17:23:16 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-05-05 17:23:16 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2021-05-05 17:23:16 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-05-05 17:23:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:18 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-05-05 17:23:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:19 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-05-05 17:23:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:19 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-05-05 17:23:19 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-05-05 17:23:22 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-05-05 17:23:26 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 72
2021-05-05 17:23:26 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=3!
2021-05-05 17:23:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-05-05 17:23:29 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:23:32 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-05-05 17:23:32 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 3
2021-05-05 17:23:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-05-05 17:23:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-05-05 17:23:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-05-05 17:23:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-05-05 17:23:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-05-05 17:23:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:23:42 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 3, find asic num = 72
2021-05-05 17:23:42 driver-btm-soc.c:7238:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num.
2021-05-05 17:23:42 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 0
2021-05-05 17:23:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-05-05 17:23:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-05-05 17:23:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:23:48 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 1
2021-05-05 17:23:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-05-05 17:23:49 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-05-05 17:23:52 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:23:55 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 2
2021-05-05 17:23:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:23:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-05-05 17:23:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-05-05 17:23:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:24:02 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 3
2021-05-05 17:24:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:24:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-05-05 17:24:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-05-05 17:24:05 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:24:08 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 0
2021-05-05 17:24:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-05-05 17:24:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-05-05 17:24:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-05-05 17:24:13 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:24:16 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 1
2021-05-05 17:24:16 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-05-05 17:24:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-05-05 17:24:17 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-05-05 17:24:20 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:24:23 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 2
2021-05-05 17:24:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-05-05 17:24:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-05-05 17:24:25 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-05-05 17:24:28 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:24:31 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 3
2021-05-05 17:24:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-05-05 17:24:32 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-05-05 17:24:32 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-05-05 17:24:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:24:38 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 0
2021-05-05 17:24:38 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-05-05 17:24:41 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-05-05 17:24:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff1
2021-05-05 17:24:44 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:24:47 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 1
2021-05-05 17:24:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-05-05 17:24:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-05-05 17:24:50 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff2
2021-05-05 17:24:53 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:24:56 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 2
2021-05-05 17:24:56 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-05-05 17:24:59 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-05-05 17:24:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff4
2021-05-05 17:25:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:25:05 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 3
2021-05-05 17:25:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-05-05 17:25:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-05-05 17:25:08 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-05-05 17:25:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff0
2021-05-05 17:25:33 driver-btm-soc.c:7475:calculate_timeout: dev->timeout = 642
2021-05-05 17:25:33 driver-btm-soc.c:3012:set_baud: set baud=1
2021-05-05 17:25:33 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-05-05 17:25:33 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-05-05 17:25:33 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-05-05 17:25:33 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-05-05 17:25:33 driver-btm-soc.c:3023:set_baud: read bc write is 0x83001a
2021-05-05 17:25:33 driver-btm-soc.c:4076:set_clock_delay_control: core_data = 0x04
2021-05-05 17:25:33 driver-btm-soc.c:8293:bitmain_soc_init: Open 1/4 core for reading temperature.
2021-05-05 17:25:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-05-05 17:25:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-05-05 17:25:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-05-05 17:25:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-05-05 17:25:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 3
2021-05-05 17:25:36 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-05-05 17:25:36 temperature.c:422:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-05-05 17:25:36 temperature.c:448:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98
2021-05-05 17:25:36 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-05-05 17:25:36 temperature.c:531:calibration_sensor_offset: Warning: Chain[0] has no temp info ! we will fix it
2021-05-05 17:25:36 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-05-05 17:25:36 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[17] 
2021-05-05 17:25:37 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[17] get middle temp offset=-5 typeID=55
2021-05-05 17:25:37 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-05-05 17:25:37 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[12] 
2021-05-05 17:25:38 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[12] get middle temp offset=-5 typeID=55
2021-05-05 17:25:38 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-05-05 17:25:38 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[53] 
2021-05-05 17:25:39 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[53] get middle temp offset=-5 typeID=55
2021-05-05 17:25:39 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-05-05 17:25:39 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[48] 
2021-05-05 17:25:40 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[48] get middle temp offset=-5 typeID=55
2021-05-05 17:25:40 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-05-05 17:25:40 temperature.c:422:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-05-05 17:25:40 temperature.c:448:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98
2021-05-05 17:25:40 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-05-05 17:25:40 temperature.c:531:calibration_sensor_offset: Warning: Chain[1] has no temp info ! we will fix it
2021-05-05 17:25:40 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-05-05 17:25:40 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[17] 
2021-05-05 17:25:41 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[17] get middle temp offset=-5 typeID=55
2021-05-05 17:25:41 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-05-05 17:25:41 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[12] 
2021-05-05 17:25:42 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[12] get middle temp offset=-5 typeID=55
2021-05-05 17:25:42 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-05-05 17:25:42 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[53] 
2021-05-05 17:25:43 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[53] get middle temp offset=-5 typeID=55
2021-05-05 17:25:43 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-05-05 17:25:43 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[48] 
2021-05-05 17:25:44 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[48] get middle temp offset=-5 typeID=55
2021-05-05 17:25:44 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-05-05 17:25:44 temperature.c:422:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-05-05 17:25:44 temperature.c:448:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98
2021-05-05 17:25:44 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-05-05 17:25:44 temperature.c:531:calibration_sensor_offset: Warning: Chain[2] has no temp info ! we will fix it
2021-05-05 17:25:44 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-05-05 17:25:44 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[17] 
2021-05-05 17:25:45 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[17] get middle temp offset=-5 typeID=55
2021-05-05 17:25:45 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-05-05 17:25:45 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[12] 
2021-05-05 17:25:46 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[12] get middle temp offset=-5 typeID=55
2021-05-05 17:25:46 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-05-05 17:25:46 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[53] 
2021-05-05 17:25:47 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[53] get middle temp offset=-5 typeID=55
2021-05-05 17:25:47 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-05-05 17:25:47 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[48] 
2021-05-05 17:25:48 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[48] get middle temp offset=-5 typeID=55
2021-05-05 17:25:48 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-05-05 17:25:48 temperature.c:422:calibration_sensor_offset: chain[3] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 18  13  54  49  0  0  0  0 
sensor offset: 0  0  0  0  0  0  0  0 
2021-05-05 17:25:48 temperature.c:448:calibration_sensor_offset: chain[3] temp chip I2C addr=0x98
2021-05-05 17:25:48 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-05-05 17:25:48 temperature.c:531:calibration_sensor_offset: Warning: Chain[3] has no temp info ! we will fix it
2021-05-05 17:25:48 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093318, cmd_buf[1]=0x6131, cmd_buf[2]=0x13000000, misc=0x6131
2021-05-05 17:25:48 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[17] 
2021-05-05 17:25:49 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[17] get middle temp offset=-5 typeID=55
2021-05-05 17:25:49 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092418, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-05-05 17:25:49 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[12] 
2021-05-05 17:25:50 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[12] get middle temp offset=-5 typeID=55
2021-05-05 17:25:50 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099f18, cmd_buf[1]=0x6131, cmd_buf[2]=0x5000000, misc=0x6131
2021-05-05 17:25:50 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[53] 
2021-05-05 17:25:51 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[53] get middle temp offset=-5 typeID=55
2021-05-05 17:25:51 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41099018, cmd_buf[1]=0x6131, cmd_buf[2]=0xf000000, misc=0x6131
2021-05-05 17:25:51 temperature.c:553:calibration_sensor_offset: Chain[3] use default temp chip[48] 
2021-05-05 17:25:52 temperature.c:562:calibration_sensor_offset: Chain[3] Chip[48] get middle temp offset=-5 typeID=55
2021-05-05 17:25:56 temperature.c:589:do_calibration_temperature_sensor: bring up lowest temperature is 32
ENV 31 FAN 4920
2021-05-05 17:26:06 driver-btm-soc.c:8298:bitmain_soc_init: Boot environment temperature is 31
2021-05-05 17:26:06 driver-btm-soc.c:8308:bitmain_soc_init: set TICKET_MASK
2021-05-05 17:26:06 driver-btm-soc.c:4130:open_core_bm1391: Start Open Core!!
2021-05-05 17:26:16 driver-btm-soc.c:4202:open_core_bm1391: End Open Core!!
2021-05-05 17:26:16 freq_tuning.c:312:freq_tuning_get_max_freq: Max freq of tuning is 425
ENV 31 FAN 4920
2021-05-05 17:26:16 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.00 ...
2021-05-05 17:26:16 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[37] = 19.670696
2021-05-05 17:26:16 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.000000 
2021-05-05 17:26:17 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[57] = 19.336982
2021-05-05 17:26:17 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.670696 
2021-05-05 17:26:18 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[77] = 19.003267
2021-05-05 17:26:18 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.336982 
2021-05-05 17:26:19 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[97] = 18.669553
2021-05-05 17:26:19 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.003267 
2021-05-05 17:26:20 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[117] = 18.335839
2021-05-05 17:26:20 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.669553 
2021-05-05 17:26:21 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[125] = 18.202353
2021-05-05 17:26:21 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.335839 
2021-05-05 17:26:22 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[127] = 18.168982
2021-05-05 17:26:22 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.202353 
2021-05-05 17:26:23 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[129] = 18.135610
2021-05-05 17:26:23 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.168982 
2021-05-05 17:26:24 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[131] = 18.102239
2021-05-05 17:26:24 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.135610 
2021-05-05 17:26:25 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[133] = 18.068867
2021-05-05 17:26:26 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.102239 
2021-05-05 17:26:27 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[135] = 18.035496
2021-05-05 17:26:27 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.068867 
2021-05-05 17:26:28 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[136] = 18.018810
2021-05-05 17:26:28 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.035496 
2021-05-05 17:26:29 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[137] = 18.002124
2021-05-05 17:26:29 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.018810 
2021-05-05 17:26:30 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 385
2021-05-05 17:26:30 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-05-05 17:26:31 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-05-05 17:26:32 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-05-05 17:26:33 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-05-05 17:26:34 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-05-05 17:26:35 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-05-05 17:26:36 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-05-05 17:26:37 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-05-05 17:26:38 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-05-05 17:26:39 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-05-05 17:26:40 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-05-05 17:26:41 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 385.00M
2021-05-05 17:26:46 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 385
2021-05-05 17:26:46 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-05-05 17:26:47 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-05-05 17:26:48 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-05-05 17:26:49 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-05-05 17:26:50 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-05-05 17:26:51 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-05-05 17:26:52 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-05-05 17:26:54 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-05-05 17:26:55 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-05-05 17:26:56 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-05-05 17:26:57 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-05-05 17:26:58 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 385.00M
2021-05-05 17:27:03 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 360
2021-05-05 17:27:03 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-05-05 17:27:04 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-05-05 17:27:05 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-05-05 17:27:06 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-05-05 17:27:07 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-05-05 17:27:08 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-05-05 17:27:09 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-05-05 17:27:10 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-05-05 17:27:11 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-05-05 17:27:12 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-05-05 17:27:13 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 360.00M
2021-05-05 17:27:18 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 3. to 375
2021-05-05 17:27:18 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 125.00M
2021-05-05 17:27:19 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 150.00M
2021-05-05 17:27:20 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 175.00M
2021-05-05 17:27:21 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 200.00M
2021-05-05 17:27:22 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 225.00M
2021-05-05 17:27:23 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 250.00M
2021-05-05 17:27:24 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 275.00M
2021-05-05 17:27:25 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 300.00M
2021-05-05 17:27:26 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 325.00M
2021-05-05 17:27:27 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 350.00M
2021-05-05 17:27:28 driver-btm-soc.c:4963:increase_freq_slowly: 

Increase frequency to 375.00M
2021-05-05 17:27:33 driver-btm-soc.c:6051:set_timeout: freq 395 final timeout=447
ENV 31 FAN 5040
2021-05-05 17:27:33 freq_tuning.c:621:freq_tuning_prepare_works: Fail to open test pattern file /dev/91602_pattern_72.txt.
2021-05-05 17:27:33 freq_tuning.c:3090:do_pre_test_for_user_mode: Pre-test cost 0s.
2021-05-05 17:27:34 power.c:458:get_chain_voltage: chain[0], voltage is: 19.98 
2021-05-05 17:27:35 power.c:458:get_chain_voltage: chain[1], voltage is: 20.03 
2021-05-05 17:27:35 power.c:458:get_chain_voltage: chain[2], voltage is: 19.95 
2021-05-05 17:27:36 power.c:458:get_chain_voltage: chain[3], voltage is: 19.97 
2021-05-05 17:27:36 power.c:482:get_average_voltage: average  voltage is: 19.98 
2021-05-05 17:27:36 driver-btm-soc.c:8387:bitmain_soc_init: Init done!
2021-05-05 17:27:36 driver-btm-soc.c:8389:bitmain_soc_init: ideal_hash_rate_fixed 28000
2021-05-05 17:27:36 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-05-05 17:27:36 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-05-05 17:27:37 driver-btm-soc.c:8823:send_job: Version num 2
2021-05-05 17:27:37 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 36
2021-05-05 17:28:03 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-05-05 17:28:05 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-05-05 17:28:06 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-05-05 17:28:08 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-05-05 17:28:10 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-05-05 17:28:12 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-05-05 17:28:14 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-05-05 17:28:15 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-05-05 17:28:17 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-05-05 17:28:19 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-05-05 17:28:20 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2021-05-05 17:28:22 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
ENV 27 FAN 5040

нестаб.txt

Изменено 6 мая 2021, 09:04 пользователем nick555

[kias]

Может кто подскажет, что за LDO (gadsjd) bи где купить чипы на innosilicon t2t? 

[spylexx]

доброго времени!

есть плата bhb07601 s17 pro чипы дохлики поменял,

а вот eeprom пуст , может поделится кто.

[spylexx]

10.05.2021 в 15:49, kias сказал:

gadsjd

это возможно из этого http://www.smdmark.com/en-US/smd-code-GAD.html

[ushba]

Коллеги, подскажите, куда копать....
Есть 10 штук асиков S17 Pro, с заводской прошивкой от апреля 2019 года.
По идее, для перепрошивки нужно только разблокировать SSH.
Но - не получается. Все 10 асиков - "unlock failed"
Может, кто сталкивался с таким их поведением?

Изменено 20 мая 2021, 12:22 пользователем ushba

[kias]

Надо прошивать, через sd прошивка нужна с boot сектором. 

[scopus]

@ushba  не трогайте их и живите спокойно. Зачем шить? Скучно живете и не было давно геморроя? Получите..

У Вас стаж в крипте огого.. не испытывайте судьбу с этим говном. Еле помог избавится от них..

[AlexMu]

Добрый день, специалистам и сочувствующим.

 

Пытаюсь поремонтировать плату на S17+ и Т17+. Есть прибор из Китая, но экран синий без каких-либо надписей.

Лог прикладываю.  Подскажите, как это поправить? Жирным шрифтом выделил моменты которые мне кажутся проблемными.

Quote

1970-01-01 00:01:07 main.c:45:main: Ready for test
1970-01-01 00:01:16 single_board_test.c:2328:get_eeprom_info: EEPROM info not valid!
1970-01-01 00:01:16 single_board_test.c:2330:get_eeprom_info: fixture_header 0000, crc_check1 4ffe, crc_fixture 0000, crc_check2 1b00, crc_test_hashboard_classification 0000
1970-01-01 00:01:16 single_board_test.c:849:dump_eeprom_info: --- dump eeprom info ---
fixture_header:      0x0000
fixture_version:     0x0000
hash_board_sn:       0x0000000000000000000000000000000000000000
pcb_version:                0x0000
bom_version:                0x0000
temp_sensor_type:           0x00
product_id:                 0x00
crc_test_fixture:           0x0000
BIN info:                   BIN0
FT version:                 A0V0
Chip version:               0x00
hashboard_classification:   0
1970-01-01 00:01:16 single_board_test.c:2585:single_board_test: g_test_level 7, pattern_test_time 1
1970-01-01 00:01:16 single_board_test.c:2375:do_single_board_test: Begin test
1970-01-01 00:01:16 fan.c:276:front_fan_power_on: Note: front fan is power on!
1970-01-01 00:01:16 fan.c:288:rear_fan_power_on: Note: rear fan is power on!
1970-01-01 00:01:16 driver-btm-api.c:1165:miner_device_init: Detect 256MB control board of XILINX
1970-01-01 00:01:16 driver-btm-api.c:1106:init_fan_parameter: fan_eft : 0  fan_pwm : 0
1970-01-01 00:01:22 driver-btm-api.c:1090:init_miner_version: miner ID : 813864867510481c
1970-01-01 00:01:22 driver-btm-api.c:1096:init_miner_version: FPGA Version = 0xB023
1970-01-01 00:01:22 single_board_test.c:714:check_fpga: 
FPGA version error, please update it
1970-01-01 00:01:30 single_board_test.c:2108:upload_log_generate: generate result.json done
upload command::/mnt/card/uploadlog.sh BHB07602 unknow PT1 0001 Other-Error /tmp/log
sh: /mnt/card/uploadlog.sh: not found
run upload command failed!
1970-01-01 00:01:48 single_board_test.c:1561:kill_hashboard: ****power off hashboard****
1970-01-01 00:02:00 main.c:90:main: Press 'test' key to continue

 

Изменено 24 мая 2021, 14:09 пользователем AlexMu
.

[Splinter]

19 минут назад, AlexMu сказал:

Лог прикладываю.

Обращайтесь к тому кто вам его продал. Он должен дать файлы для прошивки с SD прошивки FPGA (входит в состав загрузчика BOOT.bin). Для работы тестера под плюсы версия этой прошивки важна, остальным моделям пофиг. Повторюсь - шьется именно в контрольку, это не файлы в составе/для SD с тестовым софтом.

Продаваны берут чистый тестер и комплектуют его SD картой под ту модель, которую вы покупаете, упуская указанный выше момент. Отсюда и проблемы. Только скорее всего продовец будет изображать глухого и будет слать файлы для SD либо с тестером либо с обычной прошивкой ((

[AlexMu]

18 minutes ago, Splinter said:

Он должен дать файлы для прошивки с SD прошивки FPGA (входит в состав загрузчика BOOT.bin)

Спасибо за разъяснения.

А для этого прибора может быть у кого-то найдется необходимая прошивка?

Я конечно написал китайцам, но ответят или нет - большой вопрос.

Как-то хочется запустить его ?

 

Они, кстати, дали ссылки на прошивки, но как-то не помогает... уже раз 100 попробовал, наверное..

Изменено 24 мая 2021, 14:44 пользователем AlexMu

[ushba]

23.05.2021 в 23:56, scopus сказал:

@ushba  не трогайте их и живите спокойно. Зачем шить? Скучно живете и не было давно геморроя? Получите..

У Вас стаж в крипте огого.. не испытывайте судьбу с этим говном. Еле помог избавится от них..

Я бы с асиками вообще не связывался - но я обслуживаю железо одного, скажем так, инвестора.  Ему их подогнали - уж не знаю, за какие ништяки.
Он знает, что у знакомого S17 Pro  выдают 65-70 тх, и хочет так же.... ?

[scopus]

@ushba  не стоит, я так подвязался знакомым помочь, потом,как жара пошла проклял все на свете, как потекли чипы, как начался геморой с этим барахлом, около 50 процентов не меньше вышло из строя и как думаешь на кого смотрели косо?

З/Ы/ да и вообще положите их на бок на блок питания..

[ushba]

1 час назад, scopus сказал:

>> да и вообще положите их на бок на блок питания..

Ну, так и лежат они у меня... ?

[STmeteu]

Добрый день. Можете пожалуйста подсказать, как считаете, по надежности лучше antminer t19 или Avalon 1246?

 

[svm55]

Добрый день! Какая антмайнерская прошивка без подписи, позволяет уменьшать частоту ? Поставил фикс 600М,. (Antminer-S9-all-201705031858-600M-user-Update2UBI-NF.tar.gz), но там не нашёл, как понизить.  А если поставить из последних, то есть способ вернуться назад , хотя бы, например, к той же 600М?

[Splinter]

@svm55 Частоту можно менять только на старых прошивках с фиксированной частотой. На автофрековых нет такой возможности.

Переходите на страницу конфигурирования пулов. Далее в адресной строке добавляете к адресу цифру 1 или 2 (точно не помню, попробуйте оба варианта). Это даст переход на страницу как при первом запуске где можно будет еще раз выбрать частоту 550-600-650,

Есть еще одна страница minerAdvanced.cgi - там вроде любую частоту можно выставить.

[VladimirDR]

Всем привет ?

Ситуация следующая : имеем Antminer DR5 из поднебесной, после изменения url и кошелька, перестал видеть платы ! 
Кто с ними сталкивался ?
Лог имеется, под конец вылазит : local0.notice cgminer[1122]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!

 

Территориально Москва, вдруг кто сможет нормально отдиагностировать, привезу хоть в Люберцы ! )

[bekas7]

Приветствую коллеги.
Ищу старые прошивки на Т17. Интересует 20190924. Может у кого есть архив, поделитесь если не жалко.

[nick555]

и снова здрасте!

S15 раньше запускался в рабочий режим через раз, теперь перестал, если включался мог работать месяц  24/7

смущают эти строки
2021-08-03 16:18:49 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec

.

2021-08-03 16:20:05 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-08-03 16:20:05 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2021-08-03 16:20:06 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!

 

и так происходит по кругу, может час молотить в пустую....
подскажите в каком направлении копать(

заранее спасибо за ответ!

 

 

Новый текстовый документ.txt

Изменено 3 авг 2021, 18:18 пользователем nick555

[bekas7]

13 часов назад, nick555 сказал:

chain 0, find asic num = 0

Копать в этом направлении. Не видит чипы на плате. В ремонт.

[nick555]

на всех платах?

[obelix13]

Доброго времени суток.
Подскажите кто решил такую проблему на Т17+?


random: nonblocking pool is initialized
2021-08-09 08:42:09 driver-btm-api.c:762:init_freq_mode: This is scan-user version
2021-08-09 08:42:09 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version     = 1
2021-08-09 08:42:09 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab        = 1
2021-08-09 08:42:09 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-08-09 08:42:09 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun  2 10:11:10 CST 2020 type: Antminer T17+
2021-08-09 08:42:09 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50
2021-08-09 08:42:09 driver-btm-api.c:2180:show_sn: 806c950618c08854�7
2021-08-09 08:42:09 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 806c950618c08854�7
2021-08-09 08:42:09 fan.c:263:front_fan_power_on: Note: front fan is power on!
2021-08-09 08:42:09 fan.c:273:rear_fan_power_on: Note: rear fan is power on!
2021-08-09 08:42:09 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX
2021-08-09 08:42:09 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2021-08-09 08:42:15 driver-btm-api.c:1281:init_miner_version: miner ID : 806c950618c08854
2021-08-09 08:42:15 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2021-08-09 08:42:21 Fixture CRC check fail.
2021-08-09 08:42:21 Chain 2 data failed.
2021-08-09 08:42:21 eeprom.c:392:check_pattern_test_result: invalid pattern test result. ignore, fill with 0xff
2021-08-09 08:42:21 driver-btm-api.c:222:set_miner_status: ERROR_EEPROM_INFO
2021-08-09 08:42:21 driver-btm-api.c:156:stop_mining: stop mining: Load data failed.

2021-08-09 08:42:21 driver-btm-api.c:142:killall_hashboard: ****power off hashboard****
2021-08-09 09:07:18 driver/driver-btm-api.c:163:stop_mining: stop mining: PIC init failed!
2021-08-09 09:07:18 driver/thread.c:3131:cancel_read_nonce_reg_thread: cancel thread

 

Изменено 9 авг 2021, 09:09 пользователем obelix13

[Splinter]

@obelix13 Перешейте EEPROM на  Chain 2. Целый считайте с соседней платы.