Перейти к содержанию

Antminer. Все модели


Lexis77

Рекомендуемые сообщения

Собственно новые асики, s9j новые, прошивки последние 10 инюня и 31июля. Прошиться на стороннюю прошивку через веб интерфейс не даёт(cannot find signature), с сд карты прошиться на t9+ -SD Tools не даёт(изначально  при включение горят оба светодиода красный и зелёный), доступ по ssh закрыт. Как можно прошиться на кастомную прошивку ? 

Ссылка на комментарий
Поделиться на другие сайты

  • Ответов 21,3 тыс
  • Создана
  • Последний ответ

Топ авторов темы

здраствуйте, мною были приобретены их Китая б/у Т9+, БП исправные, на других работают отлично.

основная проблема это  их  хешрейт, из 10,5 они выдают только 4, на всех лезвиях светят диоды - незнаю как должно быть

прикладываю скрин, и надеюсь на вашу помощь!

его корпус кстати чуть меньше чем у новых Т9+, плата управления как и у всех ксилинг

какие варианты вообще нужно сделать? от пыли я почистил, может сделать рекавери?  кернел лог выложить?

трабла.jpg

Ссылка на комментарий
Поделиться на другие сайты

22 минуты назад, glycerinum сказал:

мною были приобретены их Китая б/у Т9+

 

Что приобрели, то и получили. Все претензии  к продавцу.

Ссылка на комментарий
Поделиться на другие сайты

я понимаю конечно, но хотелось бы разобраться, работали сначало отлично  (в гараже), потом на утро стало так...

Ссылка на комментарий
Поделиться на другие сайты

1 hour ago, glycerinum said:

я понимаю конечно, но хотелось бы разобраться, работали сначало отлично  (в гараже), потом на утро стало так...

Можете скинуть кернел лог, наши мастера глянут. Вообще такое может быть так же из за плохих шлейфов, можете их поменять местами, и заново рестарт сделать при включении

Ссылка на комментарий
Поделиться на другие сайты

Следующая проблема S15 в лоуповер режиме майнит, в обычном перестает через 3-5 минут после старта.

Лог такой, нагуглил похожу проблему https://bitcointalk.org/index.php?topic=5134752.0 но у парня продолжает майнить, у меня хеш падает на 0.

Температура чипа 71, самый горячий, битых нет.

 

Скрытый текст

 

2019-11-26 19:02:02 power.c:381:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 18.20 ...
2019-11-26 19:02:02 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[35] = 19.704067
2019-11-26 19:02:02 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 20.000000 
2019-11-26 19:02:03 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[53] = 19.403724
2019-11-26 19:02:04 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.704067 
2019-11-26 19:02:05 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[71] = 19.103382
2019-11-26 19:02:05 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.403724 
2019-11-26 19:02:06 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[89] = 18.803039
2019-11-26 19:02:06 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.103382 
2019-11-26 19:02:07 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[107] = 18.502696
2019-11-26 19:02:07 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.803039 
2019-11-26 19:02:08 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[115] = 18.369210
2019-11-26 19:02:08 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.502696 
2019-11-26 19:02:09 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[117] = 18.335839
2019-11-26 19:02:09 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.369210 
2019-11-26 19:02:10 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[119] = 18.302467
2019-11-26 19:02:10 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.335839 
2019-11-26 19:02:11 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[121] = 18.269096
2019-11-26 19:02:11 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.302467 
2019-11-26 19:02:12 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[123] = 18.235724
2019-11-26 19:02:12 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.269096 
2019-11-26 19:02:13 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[124] = 18.219039
2019-11-26 19:02:13 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.235724 
2019-11-26 19:02:14 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[125] = 18.202353
2019-11-26 19:02:14 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.219039 
2019-11-26 19:02:15 driver-btm-soc.c:6596:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 400
2019-11-26 19:02:15 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 125.00M
2019-11-26 19:02:16 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 150.00M
2019-11-26 19:02:17 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 175.00M
2019-11-26 19:02:18 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 200.00M
2019-11-26 19:02:19 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 225.00M
2019-11-26 19:02:20 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 250.00M
2019-11-26 19:02:22 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 275.00M
2019-11-26 19:02:23 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 300.00M
2019-11-26 19:02:24 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 325.00M
2019-11-26 19:02:25 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 350.00M
2019-11-26 19:02:26 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 375.00M
2019-11-26 19:02:27 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 400.00M
2019-11-26 19:02:28 driver-btm-soc.c:6596:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 355
2019-11-26 19:02:28 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 125.00M
2019-11-26 19:02:29 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 150.00M
2019-11-26 19:02:30 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 175.00M
2019-11-26 19:02:31 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 200.00M
2019-11-26 19:02:32 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 225.00M
2019-11-26 19:02:33 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 250.00M
2019-11-26 19:02:34 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 275.00M
2019-11-26 19:02:35 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 300.00M
2019-11-26 19:02:36 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 325.00M
2019-11-26 19:02:37 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 350.00M
2019-11-26 19:02:38 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 355.00M
2019-11-26 19:02:43 driver-btm-soc.c:6596:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 380
2019-11-26 19:02:43 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 125.00M
2019-11-26 19:02:44 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 150.00M
2019-11-26 19:02:45 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 175.00M
2019-11-26 19:02:46 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 200.00M
2019-11-26 19:02:47 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 225.00M
2019-11-26 19:02:48 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 250.00M
2019-11-26 19:02:49 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 275.00M
2019-11-26 19:02:50 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 300.00M
2019-11-26 19:02:51 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 325.00M
2019-11-26 19:02:52 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 350.00M
2019-11-26 19:02:53 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 375.00M
2019-11-26 19:02:54 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 380.00M
2019-11-26 19:02:59 driver-btm-soc.c:6596:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 3. to 390
2019-11-26 19:02:59 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 125.00M
2019-11-26 19:03:00 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 150.00M
2019-11-26 19:03:01 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 175.00M
2019-11-26 19:03:03 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 200.00M
2019-11-26 19:03:04 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 225.00M
2019-11-26 19:03:05 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 250.00M
2019-11-26 19:03:06 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 275.00M
2019-11-26 19:03:07 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 300.00M
2019-11-26 19:03:08 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 325.00M
2019-11-26 19:03:09 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 350.00M
2019-11-26 19:03:10 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 375.00M
2019-11-26 19:03:11 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 390.00M
2019-11-26 19:03:16 driver-btm-soc.c:5996:set_timeout: freq 395 final timeout=447
2019-11-26 19:03:17 power.c:439:get_chain_voltage: chain[0], voltage is: 18.06 
2019-11-26 19:03:18 power.c:439:get_chain_voltage: chain[1], voltage is: 18.00 
2019-11-26 19:03:18 power.c:439:get_chain_voltage: chain[2], voltage is: 17.97 
2019-11-26 19:03:19 power.c:439:get_chain_voltage: chain[3], voltage is: 18.10 
2019-11-26 19:03:19 power.c:462:get_average_voltage: average  voltage is: 18.03 
2019-11-26 19:03:19 driver-btm-soc.c:7898:bitmain_soc_init: Init done!
2019-11-26 19:03:20 temperature.c:941:read_temp_func: bring_up_pcb_temp = 30
2019-11-26 19:03:25 util.c:2196:process_version_mask: Pool 0 Verion num is 2
2019-11-26 19:03:26 driver-btm-soc.c:8271:send_job: Version num 2
2019-11-26 19:03:46 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-11-26 19:03:48 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-11-26 19:03:49 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-11-26 19:03:51 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-11-26 19:03:53 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-11-26 19:03:55 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-11-26 19:03:56 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2019-11-26 19:03:58 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2019-11-26 19:04:00 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2019-11-26 19:04:01 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2019-11-26 19:04:04 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2019-11-26 19:04:05 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!

 


 

Ссылка на комментарий
Поделиться на другие сайты

12 hours ago, frta said:

Следующая проблема S15 в лоуповер режиме майнит, в обычном перестает через 3-5 минут после старта.

Лог такой, нагуглил похожу проблему https://bitcointalk.org/index.php?topic=5134752.0 но у парня продолжает майнить, у меня хеш падает на 0.

Температура чипа 71, самый горячий, битых нет.

 

  Hide contents

 

2019-11-26 19:02:02 power.c:381:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 18.20 ...
2019-11-26 19:02:02 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[35] = 19.704067
2019-11-26 19:02:02 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 20.000000 
2019-11-26 19:02:03 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[53] = 19.403724
2019-11-26 19:02:04 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.704067 
2019-11-26 19:02:05 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[71] = 19.103382
2019-11-26 19:02:05 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.403724 
2019-11-26 19:02:06 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[89] = 18.803039
2019-11-26 19:02:06 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.103382 
2019-11-26 19:02:07 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[107] = 18.502696
2019-11-26 19:02:07 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.803039 
2019-11-26 19:02:08 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[115] = 18.369210
2019-11-26 19:02:08 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.502696 
2019-11-26 19:02:09 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[117] = 18.335839
2019-11-26 19:02:09 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.369210 
2019-11-26 19:02:10 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[119] = 18.302467
2019-11-26 19:02:10 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.335839 
2019-11-26 19:02:11 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[121] = 18.269096
2019-11-26 19:02:11 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.302467 
2019-11-26 19:02:12 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[123] = 18.235724
2019-11-26 19:02:12 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.269096 
2019-11-26 19:02:13 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[124] = 18.219039
2019-11-26 19:02:13 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.235724 
2019-11-26 19:02:14 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[125] = 18.202353
2019-11-26 19:02:14 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 18.219039 
2019-11-26 19:02:15 driver-btm-soc.c:6596:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 400
2019-11-26 19:02:15 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 125.00M
2019-11-26 19:02:16 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 150.00M
2019-11-26 19:02:17 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 175.00M
2019-11-26 19:02:18 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 200.00M
2019-11-26 19:02:19 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 225.00M
2019-11-26 19:02:20 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 250.00M
2019-11-26 19:02:22 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 275.00M
2019-11-26 19:02:23 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 300.00M
2019-11-26 19:02:24 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 325.00M
2019-11-26 19:02:25 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 350.00M
2019-11-26 19:02:26 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 375.00M
2019-11-26 19:02:27 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 400.00M
2019-11-26 19:02:28 driver-btm-soc.c:6596:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 355
2019-11-26 19:02:28 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 125.00M
2019-11-26 19:02:29 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 150.00M
2019-11-26 19:02:30 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 175.00M
2019-11-26 19:02:31 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 200.00M
2019-11-26 19:02:32 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 225.00M
2019-11-26 19:02:33 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 250.00M
2019-11-26 19:02:34 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 275.00M
2019-11-26 19:02:35 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 300.00M
2019-11-26 19:02:36 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 325.00M
2019-11-26 19:02:37 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 350.00M
2019-11-26 19:02:38 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 355.00M
2019-11-26 19:02:43 driver-btm-soc.c:6596:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 380
2019-11-26 19:02:43 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 125.00M
2019-11-26 19:02:44 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 150.00M
2019-11-26 19:02:45 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 175.00M
2019-11-26 19:02:46 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 200.00M
2019-11-26 19:02:47 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 225.00M
2019-11-26 19:02:48 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 250.00M
2019-11-26 19:02:49 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 275.00M
2019-11-26 19:02:50 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 300.00M
2019-11-26 19:02:51 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 325.00M
2019-11-26 19:02:52 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 350.00M
2019-11-26 19:02:53 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 375.00M
2019-11-26 19:02:54 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 380.00M
2019-11-26 19:02:59 driver-btm-soc.c:6596:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 3. to 390
2019-11-26 19:02:59 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 125.00M
2019-11-26 19:03:00 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 150.00M
2019-11-26 19:03:01 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 175.00M
2019-11-26 19:03:03 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 200.00M
2019-11-26 19:03:04 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 225.00M
2019-11-26 19:03:05 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 250.00M
2019-11-26 19:03:06 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 275.00M
2019-11-26 19:03:07 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 300.00M
2019-11-26 19:03:08 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 325.00M
2019-11-26 19:03:09 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 350.00M
2019-11-26 19:03:10 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 375.00M
2019-11-26 19:03:11 driver-btm-soc.c:4931:increase_freq_slowly: 

Increase frequency to 390.00M
2019-11-26 19:03:16 driver-btm-soc.c:5996:set_timeout: freq 395 final timeout=447
2019-11-26 19:03:17 power.c:439:get_chain_voltage: chain[0], voltage is: 18.06 
2019-11-26 19:03:18 power.c:439:get_chain_voltage: chain[1], voltage is: 18.00 
2019-11-26 19:03:18 power.c:439:get_chain_voltage: chain[2], voltage is: 17.97 
2019-11-26 19:03:19 power.c:439:get_chain_voltage: chain[3], voltage is: 18.10 
2019-11-26 19:03:19 power.c:462:get_average_voltage: average  voltage is: 18.03 
2019-11-26 19:03:19 driver-btm-soc.c:7898:bitmain_soc_init: Init done!
2019-11-26 19:03:20 temperature.c:941:read_temp_func: bring_up_pcb_temp = 30
2019-11-26 19:03:25 util.c:2196:process_version_mask: Pool 0 Verion num is 2
2019-11-26 19:03:26 driver-btm-soc.c:8271:send_job: Version num 2
2019-11-26 19:03:46 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-11-26 19:03:48 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-11-26 19:03:49 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-11-26 19:03:51 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-11-26 19:03:53 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-11-26 19:03:55 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-11-26 19:03:56 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2019-11-26 19:03:58 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2019-11-26 19:04:00 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2019-11-26 19:04:01 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2019-11-26 19:04:04 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!
2019-11-26 19:04:05 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[3], b[0] = 254, b[2] = 254!

 


 

Для начала попробуйте поставить последнюю актуальную прошивку, поставить нормальный режим, и возможно поменять пул. После этих манипуляций, если не будет работать дайте знать

Ссылка на комментарий
Поделиться на другие сайты

@gorserg за много лет тут, положительного ответа тут мне не попадалось..

Ссылка на комментарий
Поделиться на другие сайты

10 часов назад, AsicFox сказал:

Для начала попробуйте поставить последнюю актуальную прошивку, поставить нормальный режим, и возможно поменять пул. После этих манипуляций, если не будет работать дайте знать

Не помогает, проблема началсь после того как родные кулера в БП дали клина, разлетелись подшипники, в качестве временной меры стоят, https://www.dns-shop.ru/product/1b8a50e47bae3330/ventilator-5bites-f4010s-2/ но бп не перегревается точно, выносил на холодный балкон, проблема не ушла, температура чипов максимум 72.

 

019-11-27 18:45:04 power.c:462:get_average_voltage: average  voltage is: 19.73 


2019-11-27 18:45:04 driver-btm-soc.c:3790:check_system_work: low environment handler!
2019-11-27 18:45:04 driver-btm-soc.c:3791:check_system_work: low temperature reopen core and increase voltage 2 times!
2019-11-27 18:49:08 driver-btm-soc.c:3740:check_system_work: latest PCB temp = 1000, delta_vol = 0.90, AVG_rate = 18605...

 

Ссылка на комментарий
Поделиться на другие сайты

20 hours ago, frta said:

Не помогает, проблема началсь после того как родные кулера в БП дали клина, разлетелись подшипники, в качестве временной меры стоят, https://www.dns-shop.ru/product/1b8a50e47bae3330/ventilator-5bites-f4010s-2/ но бп не перегревается точно, выносил на холодный балкон, проблема не ушла, температура чипов максимум 72.

 

 

  Hide contents

019-11-27 18:45:04 power.c:462:get_average_voltage: average  voltage is: 19.73 


2019-11-27 18:45:04 driver-btm-soc.c:3790:check_system_work: low environment handler!
2019-11-27 18:45:04 driver-btm-soc.c:3791:check_system_work: low temperature reopen core and increase voltage 2 times!
2019-11-27 18:49:08 driver-btm-soc.c:3740:check_system_work: latest PCB temp = 1000, delta_vol = 0.90, AVG_rate = 18605...

 

 

посоветуемся с мастерами что может быть

Ссылка на комментарий
Поделиться на другие сайты

Может Т17 выдавать 30 тх, вместо 42 из за низкого напряжения сети? 

 

Ссылка на комментарий
Поделиться на другие сайты

1 час назад, Заклинатель BTC сказал:

Может Т17 выдавать 30 тх, вместо 42 из за низкого напряжения сети? 

 

Если на MRR настроен, то меняй. На нем не работают нормально 17-е модели.

Ссылка на комментарий
Поделиться на другие сайты

20 минут назад, gorserg сказал:

Если на MRR настроен, то меняй. На нем не работают нормально 17-е модели.

Извиняюсь, что есть MRR?

И что нужно менять если он не настроен?

Ссылка на комментарий
Поделиться на другие сайты

1 минуту назад, Заклинатель BTC сказал:

Извиняюсь, что есть MRR?

И что нужно менять если он не настроен?

На какой пул сейчас настроен?

MRR=miningrigrentals

Ссылка на комментарий
Поделиться на другие сайты

4 минуты назад, gorserg сказал:

На какой пул сейчас настроен?

MRR=miningrigrentals

Antpool. 

Аппарат стоит в отеле, неделю небыло ЭЭ. Как включили, то началась такая фигня.

Вот и думаю, может перебросили линию на более низкое качество ээ.

Ссылка на комментарий
Поделиться на другие сайты

Одна из плат в общем не загружается.

 

Правда если 10-15 раз подряд перезагрузить, то 1 раз она все таки работает. Плавающий отказ получается.

 

Закономерности какой то нет, иногда через выдергивание розетки, иногда рестарт с консоли.

Ссылка на комментарий
Поделиться на другие сайты

Здравствуйте товарищи! Подскажите пожалуйста, есть ли уже прошивка без комиссии для S9+ (два S9 подключенные одной контролькой и одним блоком питания, 20Тх/1600Вт) Или только с комиссией? Спасибо.

Ссылка на комментарий
Поделиться на другие сайты

2 часа назад, m777x сказал:

два S9 подключенные одной контролькой и одним блоком питания, 20Тх/1600Вт

 

Сказок не бывает..

Изменено пользователем scopus
Ссылка на комментарий
Поделиться на другие сайты

2 hours ago, m777x said:

Подскажите пожалуйста, есть ли уже прошивка без комиссии для S9+

 

так там комиссия 1% всего

Ссылка на комментарий
Поделиться на другие сайты

23 minutes ago, scopus said:

 

Сказок не бывает..

А в чем сказки то? Даунвольт до 9,5Тх потребляет 780 Вт, на одном приборе. Плюс такой связки - одна розетка и один БП. Плюс два кулера в запас, блок и одна контролька. Правда распайка контрольки под 6 плат - 10-20 баксов с шнурками.

13 minutes ago, sergwayne said:

 

так там комиссия 1% всего

Жадность, жадность ?

Изменено пользователем m777x
Ссылка на комментарий
Поделиться на другие сайты

26.11.2019 в 15:23, AsicFox сказал:

Можете скинуть кернел лог, наши мастера глянут. Вообще такое может быть так же из за плохих шлейфов, можете их поменять местами, и заново рестарт сделать при включении

Скрытый текст

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000299] ps7-ttc #0 at f0006000, irq=43
[    0.000604] Console: colour dummy device 80x30
[    0.000641] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040203] pid_max: default: 32768 minimum: 301
[    0.040425] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040447] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042590] CPU: Testing write buffer coherency: ok
[    0.042933] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042993] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043216] L310 cache controller enabled
[    0.043235] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121030] CPU1: Booted secondary processor
[    0.210223] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210352] Brought up 2 CPUs
[    0.210372] SMP: Total of 2 processors activated.
[    0.210380] CPU: All CPU(s) started in SVC mode.
[    0.211027] devtmpfs: initialized
[    0.213444] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214651] regulator-dummy: no parameters
[    0.222325] NET: Registered protocol family 16
[    0.224607] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226873] cpuidle: using governor ladder
[    0.226886] cpuidle: using governor menu
[    0.234284] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235793] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235807] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235920] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.257347] bio: create slab <bio-0> at 0
[    0.258750] vgaarb: loaded
[    0.259437] SCSI subsystem initialized
[    0.260480] usbcore: registered new interface driver usbfs
[    0.260662] usbcore: registered new interface driver hub
[    0.260884] usbcore: registered new device driver usb
[    0.261446] media: Linux media interface: v0.10
[    0.261605] Linux video capture interface: v2.00
[    0.261846] pps_core: LinuxPPS API ver. 1 registered
[    0.261857] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.261988] PTP clock support registered
[    0.262338] EDAC MC: Ver: 3.0.0
[    0.263382] Advanced Linux Sound Architecture Driver Initialized.
[    0.266218] DMA-API: preallocated 4096 debug entries
[    0.266231] DMA-API: debugging enabled by kernel config
[    0.266308] Switched to clocksource arm_global_timer
[    0.287365] NET: Registered protocol family 2
[    0.288030] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.288125] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.288284] TCP: Hash tables configured (established 8192 bind 8192)
[    0.288341] TCP: reno registered
[    0.288361] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.288413] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288679] NET: Registered protocol family 1
[    0.289037] RPC: Registered named UNIX socket transport module.
[    0.289049] RPC: Registered udp transport module.
[    0.289058] RPC: Registered tcp transport module.
[    0.289066] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289079] PCI: CLS 0 bytes, default 64
[    0.289522] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291525] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292898] bounce pool size: 64 pages
[    0.293790] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293993] msgmni has been set to 1486
[    0.294774] io scheduler noop registered
[    0.294787] io scheduler deadline registered
[    0.294829] io scheduler cfq registered (default)
[    0.305796] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.305816] dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.429069] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.001292] console [ttyPS0] enabled
[    1.005567] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.013210] [drm] Initialized drm 1.1.0 20060810
[    1.030252] brd: module loaded
[    1.039585] loop: module loaded
[    1.049290] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.055037] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.062871] libphy: XEMACPS mii bus: probed
[    1.067360] ------------- phy_id = 0x3625e62
[    1.072091] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.080692] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.087439] ehci-pci: EHCI PCI platform driver
[    1.094658] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.101522] usbcore: registered new interface driver usb-storage
[    1.108408] mousedev: PS/2 mouse device common for all mice
[    1.114488] i2c /dev entries driver
[    1.121426] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.126951] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.132817] Xilinx Zynq CpuIdle Driver started
[    1.137705] sdhci: Secure Digital Host Controller Interface driver
[    1.143798] sdhci: Copyright(c) Pierre Ossman
[    1.148164] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.154934] mmc0: no vqmmc regulator found
[    1.159043] mmc0: no vmmc regulator found
[    1.196327] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205016] usbcore: registered new interface driver usbhid
[    1.210533] usbhid: USB HID core driver
[    1.215235] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221533] nand: Micron MT29F2G08ABAEAWP
[    1.225498] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231442] Bad block table found at page 131008, version 0x01
[    1.237667] Bad block table found at page 130944, version 0x01
[    1.243719] 3 ofpart partitions found on MTD device pl353-nand
[    1.249507] Creating 3 MTD partitions on "pl353-nand":
[    1.254597] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262642] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.269954] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.278916] TCP: cubic registered
[    1.282153] NET: Registered protocol family 17
[    1.286863] Registering SWP/SWPB emulation handler
[    1.292738] regulator-dummy: disabling
[    1.297091] UBI: attaching mtd1 to ubi0
[    1.823935] UBI: scanning is finished
[    1.835540] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842621] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849382] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.856047] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.862924] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.868905] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876012] UBI: max/mean erase counter: 11/6, WL threshold: 4096, image sequence number: 862493722
[    1.885055] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894272] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.894277] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898241] ALSA device list:
[    1.898244]   No soundcards found.
[    1.914618] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.943562] UBIFS: recovery needed
[    2.159604] UBIFS: recovery completed
[    2.163286] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.169234] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.178337] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.188226] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.193256] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[    2.204564] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.211539] devtmpfs: mounted
[    2.214641] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.057034] random: dd urandom read with 0 bits of entropy available
[    3.456331] 
[    3.456331] bcm54xx_config_init
[    4.066322] 
[    4.066322] bcm54xx_config_init
[    7.067169] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.073256] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.218734] In axi fpga driver!
[   20.221805] request_mem_region OK!
[   20.225197] AXI fpga dev virtual address is 0xf01fe000
[   20.230334] *base_vir_addr = 0xc510
[   20.245367] In fpga mem driver!
[   20.248676] request_mem_region OK!
[   20.252186] fpga mem virtual address is 0xf3000000
[   21.146366] 
[   21.146366] bcm54xx_config_init
[   22.136417] 
[   22.136417] bcm54xx_config_init
[   25.137183] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   25.143199] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  166.533362] random: nonblocking pool is initialized
This is XILINX board. Totalram:       1039794176
Detect 1GB control board of XILINX
DETECT HW version=8000c510
miner ID : 8138c5cc6880881c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x03
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x03
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x03
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[1]: [22:5] [24:25] [51:80] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[2]: [22:5] [24:25] [52:17] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[3]: [22:5] [24:24] [88:51] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,-4,0,0,0,0,0,0
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: 1,-4,0,0,0,0,0,0
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: 1,-3,0,0,0,0,0,0
chain[12] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1743 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8138c5cc6880881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=4680
get fan[2] speed=5880
get fan[5] speed=4680
get fan[2] speed=5880
get fan[5] speed=4680
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x03
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[1]: [22:5] [24:25] [51:80] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x03
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[2]: [22:5] [24:25] [52:17] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x03
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[3]: [22:5] [24:24] [88:51] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 17 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 2 time
Chain[J2] has 17 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 3 time
Chain[J2] has 16 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 4 time
Chain[J2] has 16 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 5 time
Chain[J2] has 16 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 6 time
Chain[J2] has 16 asic
Chain[J2] has core num in PIC
Chain[J3] has core num in PIC
Chain[J4] has core num in PIC
Chain[J9] has core num in PIC
Chain[J10] has core num in PIC
Chain[J11] has core num in PIC
Chain[J12] has core num in PIC
Chain[J13] has core num in PIC
Chain[J14] has core num in PIC
miner total rate=10619GH/s fixed rate=10500GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=16
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:1 max freq=575
Chain:1 min freq=575

read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:2 max freq=575
Chain:2 min freq=575

read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:3 max freq=575
Chain:3 min freq=575

read PIC voltage=930 on chain[8]
Chain:8 chipnum=16
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:8 max freq=575
Chain:8 min freq=575

read PIC voltage=930 on chain[9]
Chain:9 chipnum=16
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:9 max freq=575
Chain:9 min freq=575

read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:10 max freq=575
Chain:10 min freq=575

read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:11 max freq=575
Chain:11 min freq=575

read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:12 max freq=575
Chain:12 min freq=575

read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:13 max freq=575
Chain:13 min freq=575


Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=16
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:1 max freq=575
Chain:1 min freq=575

read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:2 max freq=575
Chain:2 min freq=575

read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:3 max freq=575
Chain:3 min freq=575

read PIC voltage=930 on chain[8]
Chain:8 chipnum=16
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:8 max freq=575
Chain:8 min freq=575

read PIC voltage=930 on chain[9]
Chain:9 chipnum=16
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:9 max freq=575
Chain:9 min freq=575

read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:10 max freq=575
Chain:10 min freq=575

read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:11 max freq=575
Chain:11 min freq=575

read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:12 max freq=575
Chain:12 min freq=575

read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:13 max freq=575
Chain:13 min freq=575

max freq = 575
set baud=1
Chain[J11] PIC temp offset=1,-4,0,0,0,0,0,0
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
Chain[J11] chip[0] use PIC middle temp offset=-4 typeID=55
New offset Chain[10] chip[0] local:26 remote:29 offset:27 
Chain[J11] chip[0] get middle temp offset=27 typeID=55
Chain[J13] PIC temp offset=1,-3,0,0,0,0,0,0
chain[12] temp chip I2C addr=0x98
chain[12] has no middle temp, use special fix mode.
Chain[J13] chip[0] use PIC middle temp offset=-3 typeID=55
New offset Chain[12] chip[0] local:28 remote:31 offset:27 
Chain[J13] chip[0] get middle temp offset=27 typeID=55
single board rate=1179 voltage limit=870 on chain[1]
get PIC voltage=870 on chain[1], check: must be < 870
single board rate=1179 voltage limit=870 on chain[2]
get PIC voltage=870 on chain[2], check: must be < 870
single board rate=1179 voltage limit=870 on chain[3]
get PIC voltage=870 on chain[3], check: must be < 870
single board rate=1179 voltage limit=870 on chain[8]
get PIC voltage=870 on chain[8], check: must be < 870
single board rate=1179 voltage limit=870 on chain[9]
get PIC voltage=870 on chain[9], check: must be < 870
single board rate=1179 voltage limit=870 on chain[10]
get PIC voltage=870 on chain[10], check: must be < 870
single board rate=1179 voltage limit=870 on chain[11]
get PIC voltage=870 on chain[11], check: must be < 870
single board rate=1179 voltage limit=870 on chain[12]
get PIC voltage=870 on chain[12], check: must be < 870
single board rate=1179 voltage limit=870 on chain[13]
get PIC voltage=870 on chain[13], check: must be < 870
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
setStartTimePoint total_tv_start_sys=210 total_tv_end_sys=211
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=0.00000 
get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=3.62300 Asic[02]=1.94600 Asic[03]=2.01300 Asic[04]=7.14700 Asic[05]=3.35500 Asic[06]=1.54300 Asic[07]=6.49200 Asic[08]=335.544 
Asic[09]=6.97900 Asic[10]=3.20400 Asic[11]=1.52600 Asic[12]=0.00000 Asic[13]=10.2340 Asic[14]=939.524 Asic[15]=2.56600 Asic[16]=838.860 
Asic[17]=2.11300 Asic[18]=1.54300 

get RT hashrate from Chain[3]: (asic index start from 1-18)
Asic[01]=1.62700 Asic[02]=5.10000 Asic[03]=7.31400 Asic[04]=0.00000 Asic[05]=5.51900 Asic[06]=1.30800 Asic[07]=671.088 Asic[08]=6.66000 
Asic[09]=4.76400 Asic[10]=0.00000 Asic[11]=1.49300 Asic[12]=7.98500 Asic[13]=1.22400 Asic[14]=12.1630 Asic[15]=553.648 Asic[16]=4.19400 
Asic[17]=0.00000 Asic[18]=754.974 

get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 
get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 
get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=3.30500 Asic[02]=989.855 Asic[03]=1.54300 Asic[04]=0.00000 Asic[05]=989.855 Asic[06]=1.10700 Asic[07]=6.37500 Asic[08]=2.34800 
Asic[09]=1.35800 Asic[10]=7.83400 Asic[11]=6.03900 Asic[12]=1.27500 Asic[13]=8.60600 Asic[14]=402.653 Asic[15]=9.04200 Asic[16]=8.20400 
Asic[17]=2.33200 Asic[18]=637.534 

get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=1.91200 Asic[02]=654.311 Asic[03]=8.74000 Asic[04]=12.4150 Asic[05]=2.91900 Asic[06]=1.15700 Asic[07]=8.58900 Asic[08]=6.57600 
Asic[09]=3.80800 Asic[10]=788.529 Asic[11]=4.81500 Asic[12]=503.316 Asic[13]=1.97900 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=738.197 
Asic[17]=5.20000 Asic[18]=1.04000 

get RT hashrate from Chain[12]: (asic index start from 1-18)
Asic[01]=1.29100 Asic[02]=738.197 Asic[03]=7.28100 Asic[04]=2.09700 Asic[05]=4.16000 Asic[06]=9.64600 Asic[07]=7.78400 Asic[08]=9.09300 
Asic[09]=7.44900 Asic[10]=721.420 Asic[11]=4.52900 Asic[12]=335.544 Asic[13]=21.2560 Asic[14]=5.63700 Asic[15]=5.28400 Asic[16]=4.89800 
Asic[17]=603.979 Asic[18]=369.098 

get RT hashrate from Chain[13]: (asic index start from 1-18)
Asic[01]=13.7400 Asic[02]=8.32100 Asic[03]=9.24400 Asic[04]=26.5410 Asic[05]=1.52600 Asic[06]=1.02300 Asic[07]=5.01600 Asic[08]=5.97200 
Asic[09]=22.3970 Asic[10]=10.0150 Asic[11]=13.2370 Asic[12]=10.6870 Asic[13]=0.00000 Asic[14]=4.78100 Asic[15]=26.8260 Asic[16]=23.8900 
Asic[17]=23.9740 Asic[18]=31.8930 
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Asic[08]=335.544000
Asic[14]=939.524000
Asic[16]=838.860000
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Asic[07]=671.088000
Asic[15]=553.648000
Asic[18]=754.974000
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Asic[02]=989.855000
Asic[05]=989.855000
Asic[14]=402.653000
Asic[18]=637.534000
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Asic[02]=654.311000
Asic[10]=788.529000
Asic[12]=503.316000
Asic[16]=738.197000
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Asic[02]=738.197000
Asic[10]=721.420000
Asic[12]=335.544000
Asic[17]=603.979000
Asic[18]=369.098000
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=55 middle offset=27
Chain[10] Chip[1] local Temp=34
Chain[10] Chip[1] middle Temp=33
Special fix Chain[10] Chip[1] middle Temp = 49
Done read temp on Chain[10]
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=55 middle offset=27
Chain[12] Chip[1] local Temp=40
Chain[12] Chip[1] middle Temp=40
Special fix Chain[12] Chip[1] middle Temp = 55
Done read temp on Chain[12]
set FAN speed according to: temp_highest=40 temp_top1[PWM_T]=40 temp_top1[TEMP_POS_LOCAL]=40 temp_change=1 fix_fan_steps=0
FAN PWM: 28
read_temp_func Done!
CRC error counter=9399
 

помогите пожалста или скажите в чем причина

dsfg.jpg

wwrs.jpg

Ссылка на комментарий
Поделиться на другие сайты

On 12/7/2019 at 4:28 PM, glycerinum said:
  Reveal hidden contents

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000299] ps7-ttc #0 at f0006000, irq=43
[    0.000604] Console: colour dummy device 80x30
[    0.000641] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040203] pid_max: default: 32768 minimum: 301
[    0.040425] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040447] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042590] CPU: Testing write buffer coherency: ok
[    0.042933] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042993] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043216] L310 cache controller enabled
[    0.043235] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121030] CPU1: Booted secondary processor
[    0.210223] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210352] Brought up 2 CPUs
[    0.210372] SMP: Total of 2 processors activated.
[    0.210380] CPU: All CPU(s) started in SVC mode.
[    0.211027] devtmpfs: initialized
[    0.213444] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214651] regulator-dummy: no parameters
[    0.222325] NET: Registered protocol family 16
[    0.224607] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226873] cpuidle: using governor ladder
[    0.226886] cpuidle: using governor menu
[    0.234284] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235793] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235807] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235920] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.257347] bio: create slab <bio-0> at 0
[    0.258750] vgaarb: loaded
[    0.259437] SCSI subsystem initialized
[    0.260480] usbcore: registered new interface driver usbfs
[    0.260662] usbcore: registered new interface driver hub
[    0.260884] usbcore: registered new device driver usb
[    0.261446] media: Linux media interface: v0.10
[    0.261605] Linux video capture interface: v2.00
[    0.261846] pps_core: LinuxPPS API ver. 1 registered
[    0.261857] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.261988] PTP clock support registered
[    0.262338] EDAC MC: Ver: 3.0.0
[    0.263382] Advanced Linux Sound Architecture Driver Initialized.
[    0.266218] DMA-API: preallocated 4096 debug entries
[    0.266231] DMA-API: debugging enabled by kernel config
[    0.266308] Switched to clocksource arm_global_timer
[    0.287365] NET: Registered protocol family 2
[    0.288030] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.288125] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.288284] TCP: Hash tables configured (established 8192 bind 8192)
[    0.288341] TCP: reno registered
[    0.288361] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.288413] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288679] NET: Registered protocol family 1
[    0.289037] RPC: Registered named UNIX socket transport module.
[    0.289049] RPC: Registered udp transport module.
[    0.289058] RPC: Registered tcp transport module.
[    0.289066] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289079] PCI: CLS 0 bytes, default 64
[    0.289522] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291525] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292898] bounce pool size: 64 pages
[    0.293790] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293993] msgmni has been set to 1486
[    0.294774] io scheduler noop registered
[    0.294787] io scheduler deadline registered
[    0.294829] io scheduler cfq registered (default)
[    0.305796] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.305816] dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.429069] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.001292] console [ttyPS0] enabled
[    1.005567] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.013210] [drm] Initialized drm 1.1.0 20060810
[    1.030252] brd: module loaded
[    1.039585] loop: module loaded
[    1.049290] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.055037] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.062871] libphy: XEMACPS mii bus: probed
[    1.067360] ------------- phy_id = 0x3625e62
[    1.072091] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.080692] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.087439] ehci-pci: EHCI PCI platform driver
[    1.094658] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.101522] usbcore: registered new interface driver usb-storage
[    1.108408] mousedev: PS/2 mouse device common for all mice
[    1.114488] i2c /dev entries driver
[    1.121426] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.126951] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.132817] Xilinx Zynq CpuIdle Driver started
[    1.137705] sdhci: Secure Digital Host Controller Interface driver
[    1.143798] sdhci: Copyright(c) Pierre Ossman
[    1.148164] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.154934] mmc0: no vqmmc regulator found
[    1.159043] mmc0: no vmmc regulator found
[    1.196327] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205016] usbcore: registered new interface driver usbhid
[    1.210533] usbhid: USB HID core driver
[    1.215235] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221533] nand: Micron MT29F2G08ABAEAWP
[    1.225498] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231442] Bad block table found at page 131008, version 0x01
[    1.237667] Bad block table found at page 130944, version 0x01
[    1.243719] 3 ofpart partitions found on MTD device pl353-nand
[    1.249507] Creating 3 MTD partitions on "pl353-nand":
[    1.254597] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262642] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.269954] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.278916] TCP: cubic registered
[    1.282153] NET: Registered protocol family 17
[    1.286863] Registering SWP/SWPB emulation handler
[    1.292738] regulator-dummy: disabling
[    1.297091] UBI: attaching mtd1 to ubi0
[    1.823935] UBI: scanning is finished
[    1.835540] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842621] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849382] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.856047] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.862924] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.868905] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876012] UBI: max/mean erase counter: 11/6, WL threshold: 4096, image sequence number: 862493722
[    1.885055] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894272] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.894277] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898241] ALSA device list:
[    1.898244]   No soundcards found.
[    1.914618] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.943562] UBIFS: recovery needed
[    2.159604] UBIFS: recovery completed
[    2.163286] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.169234] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.178337] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.188226] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.193256] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[    2.204564] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.211539] devtmpfs: mounted
[    2.214641] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.057034] random: dd urandom read with 0 bits of entropy available
[    3.456331] 
[    3.456331] bcm54xx_config_init
[    4.066322] 
[    4.066322] bcm54xx_config_init
[    7.067169] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.073256] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.218734] In axi fpga driver!
[   20.221805] request_mem_region OK!
[   20.225197] AXI fpga dev virtual address is 0xf01fe000
[   20.230334] *base_vir_addr = 0xc510
[   20.245367] In fpga mem driver!
[   20.248676] request_mem_region OK!
[   20.252186] fpga mem virtual address is 0xf3000000
[   21.146366] 
[   21.146366] bcm54xx_config_init
[   22.136417] 
[   22.136417] bcm54xx_config_init
[   25.137183] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   25.143199] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  166.533362] random: nonblocking pool is initialized
This is XILINX board. Totalram:       1039794176
Detect 1GB control board of XILINX
DETECT HW version=8000c510
miner ID : 8138c5cc6880881c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x03
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x03
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x03
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[1]: [22:5] [24:25] [51:80] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[2]: [22:5] [24:25] [52:17] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[3]: [22:5] [24:24] [88:51] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,-4,0,0,0,0,0,0
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: 1,-4,0,0,0,0,0,0
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: 1,-3,0,0,0,0,0,0
chain[12] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1743 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8138c5cc6880881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=4680
get fan[2] speed=5880
get fan[5] speed=4680
get fan[2] speed=5880
get fan[5] speed=4680
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x03
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[1]: [22:5] [24:25] [51:80] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x03
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[2]: [22:5] [24:25] [52:17] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x03
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[3]: [22:5] [24:24] [88:51] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 17 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 2 time
Chain[J2] has 17 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 3 time
Chain[J2] has 16 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 4 time
Chain[J2] has 16 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 5 time
Chain[J2] has 16 asic
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 6 time
Chain[J2] has 16 asic
Chain[J2] has core num in PIC
Chain[J3] has core num in PIC
Chain[J4] has core num in PIC
Chain[J9] has core num in PIC
Chain[J10] has core num in PIC
Chain[J11] has core num in PIC
Chain[J12] has core num in PIC
Chain[J13] has core num in PIC
Chain[J14] has core num in PIC
miner total rate=10619GH/s fixed rate=10500GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=16
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:1 max freq=575
Chain:1 min freq=575

read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:2 max freq=575
Chain:2 min freq=575

read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:3 max freq=575
Chain:3 min freq=575

read PIC voltage=930 on chain[8]
Chain:8 chipnum=16
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:8 max freq=575
Chain:8 min freq=575

read PIC voltage=930 on chain[9]
Chain:9 chipnum=16
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:9 max freq=575
Chain:9 min freq=575

read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:10 max freq=575
Chain:10 min freq=575

read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:11 max freq=575
Chain:11 min freq=575

read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:12 max freq=575
Chain:12 min freq=575

read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:13 max freq=575
Chain:13 min freq=575


Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=16
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:1 max freq=575
Chain:1 min freq=575

read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:2 max freq=575
Chain:2 min freq=575

read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:3 max freq=575
Chain:3 min freq=575

read PIC voltage=930 on chain[8]
Chain:8 chipnum=16
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:8 max freq=575
Chain:8 min freq=575

read PIC voltage=930 on chain[9]
Chain:9 chipnum=16
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 
Chain:9 max freq=575
Chain:9 min freq=575

read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:10 max freq=575
Chain:10 min freq=575

read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:11 max freq=575
Chain:11 min freq=575

read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:12 max freq=575
Chain:12 min freq=575

read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:13 max freq=575
Chain:13 min freq=575

max freq = 575
set baud=1
Chain[J11] PIC temp offset=1,-4,0,0,0,0,0,0
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
Chain[J11] chip[0] use PIC middle temp offset=-4 typeID=55
New offset Chain[10] chip[0] local:26 remote:29 offset:27 
Chain[J11] chip[0] get middle temp offset=27 typeID=55
Chain[J13] PIC temp offset=1,-3,0,0,0,0,0,0
chain[12] temp chip I2C addr=0x98
chain[12] has no middle temp, use special fix mode.
Chain[J13] chip[0] use PIC middle temp offset=-3 typeID=55
New offset Chain[12] chip[0] local:28 remote:31 offset:27 
Chain[J13] chip[0] get middle temp offset=27 typeID=55
single board rate=1179 voltage limit=870 on chain[1]
get PIC voltage=870 on chain[1], check: must be < 870
single board rate=1179 voltage limit=870 on chain[2]
get PIC voltage=870 on chain[2], check: must be < 870
single board rate=1179 voltage limit=870 on chain[3]
get PIC voltage=870 on chain[3], check: must be < 870
single board rate=1179 voltage limit=870 on chain[8]
get PIC voltage=870 on chain[8], check: must be < 870
single board rate=1179 voltage limit=870 on chain[9]
get PIC voltage=870 on chain[9], check: must be < 870
single board rate=1179 voltage limit=870 on chain[10]
get PIC voltage=870 on chain[10], check: must be < 870
single board rate=1179 voltage limit=870 on chain[11]
get PIC voltage=870 on chain[11], check: must be < 870
single board rate=1179 voltage limit=870 on chain[12]
get PIC voltage=870 on chain[12], check: must be < 870
single board rate=1179 voltage limit=870 on chain[13]
get PIC voltage=870 on chain[13], check: must be < 870
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
setStartTimePoint total_tv_start_sys=210 total_tv_end_sys=211
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=0.00000 
get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=3.62300 Asic[02]=1.94600 Asic[03]=2.01300 Asic[04]=7.14700 Asic[05]=3.35500 Asic[06]=1.54300 Asic[07]=6.49200 Asic[08]=335.544 
Asic[09]=6.97900 Asic[10]=3.20400 Asic[11]=1.52600 Asic[12]=0.00000 Asic[13]=10.2340 Asic[14]=939.524 Asic[15]=2.56600 Asic[16]=838.860 
Asic[17]=2.11300 Asic[18]=1.54300 

get RT hashrate from Chain[3]: (asic index start from 1-18)
Asic[01]=1.62700 Asic[02]=5.10000 Asic[03]=7.31400 Asic[04]=0.00000 Asic[05]=5.51900 Asic[06]=1.30800 Asic[07]=671.088 Asic[08]=6.66000 
Asic[09]=4.76400 Asic[10]=0.00000 Asic[11]=1.49300 Asic[12]=7.98500 Asic[13]=1.22400 Asic[14]=12.1630 Asic[15]=553.648 Asic[16]=4.19400 
Asic[17]=0.00000 Asic[18]=754.974 

get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 
get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 
get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=3.30500 Asic[02]=989.855 Asic[03]=1.54300 Asic[04]=0.00000 Asic[05]=989.855 Asic[06]=1.10700 Asic[07]=6.37500 Asic[08]=2.34800 
Asic[09]=1.35800 Asic[10]=7.83400 Asic[11]=6.03900 Asic[12]=1.27500 Asic[13]=8.60600 Asic[14]=402.653 Asic[15]=9.04200 Asic[16]=8.20400 
Asic[17]=2.33200 Asic[18]=637.534 

get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=1.91200 Asic[02]=654.311 Asic[03]=8.74000 Asic[04]=12.4150 Asic[05]=2.91900 Asic[06]=1.15700 Asic[07]=8.58900 Asic[08]=6.57600 
Asic[09]=3.80800 Asic[10]=788.529 Asic[11]=4.81500 Asic[12]=503.316 Asic[13]=1.97900 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=738.197 
Asic[17]=5.20000 Asic[18]=1.04000 

get RT hashrate from Chain[12]: (asic index start from 1-18)
Asic[01]=1.29100 Asic[02]=738.197 Asic[03]=7.28100 Asic[04]=2.09700 Asic[05]=4.16000 Asic[06]=9.64600 Asic[07]=7.78400 Asic[08]=9.09300 
Asic[09]=7.44900 Asic[10]=721.420 Asic[11]=4.52900 Asic[12]=335.544 Asic[13]=21.2560 Asic[14]=5.63700 Asic[15]=5.28400 Asic[16]=4.89800 
Asic[17]=603.979 Asic[18]=369.098 

get RT hashrate from Chain[13]: (asic index start from 1-18)
Asic[01]=13.7400 Asic[02]=8.32100 Asic[03]=9.24400 Asic[04]=26.5410 Asic[05]=1.52600 Asic[06]=1.02300 Asic[07]=5.01600 Asic[08]=5.97200 
Asic[09]=22.3970 Asic[10]=10.0150 Asic[11]=13.2370 Asic[12]=10.6870 Asic[13]=0.00000 Asic[14]=4.78100 Asic[15]=26.8260 Asic[16]=23.8900 
Asic[17]=23.9740 Asic[18]=31.8930 
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Asic[08]=335.544000
Asic[14]=939.524000
Asic[16]=838.860000
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Asic[07]=671.088000
Asic[15]=553.648000
Asic[18]=754.974000
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Asic[02]=989.855000
Asic[05]=989.855000
Asic[14]=402.653000
Asic[18]=637.534000
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Asic[02]=654.311000
Asic[10]=788.529000
Asic[12]=503.316000
Asic[16]=738.197000
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Asic[02]=738.197000
Asic[10]=721.420000
Asic[12]=335.544000
Asic[17]=603.979000
Asic[18]=369.098000
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=55 middle offset=27
Chain[10] Chip[1] local Temp=34
Chain[10] Chip[1] middle Temp=33
Special fix Chain[10] Chip[1] middle Temp = 49
Done read temp on Chain[10]
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=55 middle offset=27
Chain[12] Chip[1] local Temp=40
Chain[12] Chip[1] middle Temp=40
Special fix Chain[12] Chip[1] middle Temp = 55
Done read temp on Chain[12]
set FAN speed according to: temp_highest=40 temp_top1[PWM_T]=40 temp_top1[TEMP_POS_LOCAL]=40 temp_change=1 fix_fan_steps=0
FAN PWM: 28
read_temp_func Done!
CRC error counter=9399
 

помогите пожалста или скажите в чем причина

dsfg.jpg

wwrs.jpg

Сразу видно что одну плату не видит. Сколько + тх стоит на прошивке? 10,5-12.5?

Ссылка на комментарий
Поделиться на другие сайты

Сильно отличаются s9k,s9j,s9i  потребление и живучесть зверька.

И есть ли смысл "переплачивать" за s9se ? 

Изменено пользователем thekozhin1
Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу
  • Similar Topics

    • Новички bits.media - все сюда !

      Обновлено 15 марта 2017 Всем привет. Если вы зашли в эту тему значит либо вы еще не в "теме", либо в теме но хотите узнать что-то новое. Возможно вы услышали про биток в одной из многочисленных новостей или с форумов. А может даже пришли с грабительского Рублика. Этой темой я хочу разрешить регулярные вопросы, которые рано или поздно возникают у всех кто решил влится в тему заработка на криптовалютах. Я не буду останавливаться на технических подробностях, и потому что сам не до конца пон

      в Общий

    • Antminer L3, L3+

      Доброй ночи! пожалуйста помогите кто знает с antminer l3+  работает 1.5 недели, все было хорошо.  В один момент вижу, что он выключен пришел его перезагрузил и началось   Вообщем выдает ошибку socket connect failed. connection refused то иногда включается и показывает на второй плате 21 чип место 71  много раз перезагружал, перекинул с другого асика блок питания он все равно так   не майнит уходит в ошибку   что делать подскажите пожалуйста, асику всего полторы недели скрины приложил

      в ASIC/FPGA майнеры

    • Виталик Бутерин: «Токены SHIB превзошли все мои ожидания»

      Сооснователь Эфириума Виталик Бутерин признал, что мемкоины, которые он жертвовал на благотворительность, выросли в цене вопреки его собственным прогнозам. Виталик Бутерин ответил на твит директора Frostwork Натана Янга (Nathan Young). Бизнесмен упомянул некоммерческую организацию Future of Life Institute (FLI), которая специализируется на исследованиях в области искусственного интеллекта (ИИ). Натан Янг удивился, что пожертвования в токенах SHIB для этой организации оцениваются почти в $60

      в Новости криптовалют

    • Ремонт: Bitmain Antminer s7, s9, l3+

      Официальный сайт | Antminer. Все модели. Вопросы, помощь, обсуждение.   В теме действуют все Правила форума! Перед тем как задать вопрос, посмотрите НОВИЧКИ Bits.Media, все сюда Уважайте своё и чужое время. Для обсуждения и поиска программ/драйверов пользуйтесь разделом Файлы.   Статьи на bits.media:   Полезное:   (!) FAQ (часто задаваемые вопросы)   -Как найти в продаже разъемы питания, какая маркировка

      в ASIC/FPGA майнеры

    • блок питания Antminer T21

      Нужен ваш совет . Есть ли какой то способ подключить Bitcoin Miner T21 190T Power supply AC Input voltage  380~415 3610W к одной фазной сети 200 - 230 вольт !? Векторный преобразователь частоты 220 > 380В сможет !? Например - https://spc.com.ua/ru/products/nietz-splc-nz2200-15gs2-vector-frequency-inverter-15kw-ip20-1phase-220v-to-3phase-380v

      в Блоки питания, ИБП, силовая часть

×
×
  • Создать...