Antminer S19,-pro, S19j,-pro, S19a, S19i, S19 Hyd, S19pro Hyd, S19pro+ Hyd, T19 Hyd

Cherxan · 6 фев 2023, 13:06

@Splinter

Если раньше у людей получалось , значит такого ограничения не было...

Cherxan · 6 фев 2023, 14:21

Как изменить эти значения?

Atom308 · 6 фев 2023, 16:41

@Cherxan Приветствую, Как вы получили доступ к этому файлу. Напишите пожалуйста.

Splinter · 6 фев 2023, 18:25

5 часов назад, Cherxan сказал:

@Splinter

Если раньше у людей получалось , значит такого ограничения не было...

Среди прошивок по моей ссылке есть Antminer-S19-release-202006012026 - это самая первая релизная прошивка на S19, ее получили сервисные инженеры еще до начала поставок майнеров. Старее уже некуда. И в ней также есть файл levels.json. Возможно должна быть какаято другая хитрость.

4 часа назад, Cherxan сказал:

Как изменить эти значения?

Представления не имею. root доступа к файловой системе нет.

Kowex · 7 фев 2023, 13:17

22 часа назад, Cherxan сказал:

Как изменить эти значения?

С помощью специально обученного человека.

Cherxan · 8 фев 2023, 05:23

@Kowex У вас в группе или на форуме нет таких людей?

Zhanazol · 19 фев 2023, 04:25

Подскажите где можно найти архив обновлений для отката к предыдущей версии, или Прошивку для SD карты на S19i?

Cherpak · 21 фев 2023, 08:35

В 19.02.2023 в 11:25, Zhanazol сказал:

Подскажите где можно найти архив обновлений для отката к предыдущей версии, или Прошивку для SD карты на S19i?

напиши в bitmain они там быстро отвечают на сообщения

HattoriHanzo · 25 мар 2023, 19:03

Друзья, нужна помощь, не могу найти нигде какую КПУ использует S19a 96ths

Помогите пожалуйста

Изменено 25 мар 2023, 19:03 пользователем HattoriHanzo

Зевс мининг · 27 мар 2023, 03:09

@HattoriHanzo Здравствуйте, если вам нужна помощь, пожалуйста, свяжитесь с ZEUS MINING для консультации. Мы предоставляем плату управления S19a. Также есть процессорные чипы для 19-й серии.

Или отправьте фотографии нужных вам чипов в отдел продаж.

s19st · 2 апр 2023, 04:25

Всем привет, кто может подсказать какая прошивка на s19 (88), на официальном сайте не могу понять подойдет она или нет. Возможно она на 95th.

Splinter · 2 апр 2023, 07:58

3 часа назад, s19st сказал:

Всем привет, кто может подсказать какая прошивка на s19 (88), на официальном сайте не могу понять подойдет она или нет. Возможно она на 95th.

Во первых, если прошивка не подходит то она не прошьется. Так что метод тыка здесь вполне уместен.

Во вторых. Если я вас правильно понял у вас 88 чипов на плату. Значит это платформа на чипах BM1362. Значит вам надо ставить универсальную версию с присутствием слова merge в название файла прошивки. Например, Antminer-S19-merge-release-20221227070716.bmu

Если же у вас всетаки обычная S19 c 76 чипами BM1398 с платой управления 7007(xilinx), то ее можно прошить файлом как со словом merge так и без него. Есть только один нюанс. Старые прошивки не понимают файлы формата merge. Для того чтобы обновить старую версию, надо сначало прошить последнюю не merge прошивку, а потом уже merge. Т.е. сначала Antminer-S19-release-202111161922.bmu и затем Antminer-S19-merge-release-20221227070716.bmu

S9Bitcoiner · 28 авг 2023, 01:41

Всем привет,

Есть ли у кого-нибудь схема напряжений платы управления AMLOGIC A113D, пожалуйста? Подозреваю, что неисправен блок питания.

Спасибо

Serg Navick · 28 авг 2023, 08:20

6 часов назад, S9Bitcoiner сказал:

Подозреваю, что неисправен блок питания.

Приложи лог, всё расскажу что было что будет по нему)

S9Bitcoiner · 28 авг 2023, 13:59

5 часов назад, Serg Navick сказал:

Приложи лог, всё расскажу что было что будет по нему)

но у меня даже лога нет, после обновления прошивки на карте только тускло горит зеленый, красный и ethernet выключены. Я подозреваю, что это либо NAND BRICK, либо неисправность блока питания. При этом мне удалось загрузить прошивку через microoUSB, и индикатор загорается через 10 с, то есть прошивка загружается, но не запускается.

Изменено 28 авг 2023, 14:00 пользователем S9Bitcoiner

S9Bitcoiner · 30 авг 2023, 13:54

Всем привет,

Итак, я использовал TTL-кабель для анализа выходов карты, и вот лог. Если у кого-то есть идеи, что это была за фатальная ошибка и как ее исправить, спасибо!

AXG:BL1:d1dbf2:a4926f;FEAT:F0DC31BC:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;0.0;CHK:0;
sdio debug board detected
TE: 136410

BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh

set vcck to 1100 mv
set vddee to 950 mv
init panel power
Board ID = 0
CPU clk: 1200MHz
DDR low power enabled
DDR3 chl: Rank0 16bit @ 912MHz
bist_test rank: 0 18 00 30 2b 12 45 1d 01 39 25 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 721   - PASS
Rank0: 256MB-2T-13
AddrBus test pass!
NAND init
Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0
Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b7c00, part: 0
NOTICE:  BL31: v1.3(release):3edeb02
NOTICE:  BL31: Built : 16:43:54, Apr 14 2020
NOTICE:  BL31: AXG secure boot!
NOTICE:  BL31: BL33 decompress pass
OPS=0x23
[Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh]
25 0c 23 00 fc 7e 94 ad 97 9e 5a 72 80 07 60 27
bl30:axg ver: 9 mode: 0
bl30:axg thermal0
[0.015884 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01 (Nov 19 2021 - 22:40:09), Build: jenkins-Antminer_S19j-Pro_AMLCtrl_release_tls-12

DRAM:  256 MiB
Relocation Offset is: 0eeaf000
mmu cfg end: 0x20000000
mmu cfg end: 0x20000000
register usb cfg[0][1] = 000000000ff6cfc8
aml_i2c_init_port init regs for 0
NAND:  get_sys_clk_rate_mtd() 292, clock setting 200!
bus cycle0: 6,timing: 7
NAND device id: 2c da 90 95 6 0
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
get_sys_clk_rate_mtd() 292, clock setting 250!
m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7
oob_fill_cnt =32 oob_size =64, bch_bytes =14
ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
oob avail size 6
Creating 1 MTD partitions on "A revision NAND 2Gib MT29F2G08-A":
0x000000000000-0x000000200000 : "bootloader"
A revision NAND 2Gib MT29F2G08-A initialized ok
get_sys_clk_rate_mtd() 292, clock setting 200!
bus cycle0: 6,timing: 7
NAND device id: 2c da 90 95 6 0
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
get_sys_clk_rate_mtd() 292, clock setting 250!
m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7
oob_fill_cnt =32 oob_size =64, bch_bytes =14
ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
PLANE change!
plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
aml_nand_init :oobmul=1,oobfree.length=8,oob_size=64
oob avail size 8
nbbt=20
nenv=24
nkey=32
ndtb=40
nddr=44
bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44
nbbt: info size=0x800 max_scan_blk=24, start_blk=20
nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
nbbt free list:
blockN=21, ec=-1, dirty_flag=0
blockN=22, ec=-1, dirty_flag=0
blockN=23, ec=-1, dirty_flag=0
aml_nand_scan_rsv_info 1134: page_num=1
aml_nand_scan_rsv_info 1137
nbbt valid addr: 280000
aml_nand_bbt_check 1258 bbt is valid, reading.
aml_nand_read_rsv_info:446,read nbbt info to 280000
nenv: info size=0x10000 max_scan_blk=32, start_blk=24
nenv : phy_blk_addr=25, ec=0, phy_page_addr=0, timestamp=6
nenv free list:
blockN=24, ec=-1, dirty_flag=0
blockN=26, ec=-1, dirty_flag=0
blockN=27, ec=-1, dirty_flag=0
blockN=28, ec=-1, dirty_flag=0
blockN=29, ec=-1, dirty_flag=0
blockN=30, ec=-1, dirty_flag=0
blockN=31, ec=-1, dirty_flag=0
aml_nand_scan_rsv_info 1134: page_num=32
aml_nand_scan_rsv_info 1137
nenv valid addr: 330000
nkey: info size=0x8000 max_scan_blk=40, start_blk=32
nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
nkey free list:
blockN=32, ec=-1, dirty_flag=0
blockN=33, ec=-1, dirty_flag=0
blockN=34, ec=-1, dirty_flag=0
blockN=35, ec=-1, dirty_flag=0
blockN=36, ec=-1, dirty_flag=0
blockN=37, ec=-1, dirty_flag=0
blockN=38, ec=-1, dirty_flag=0
blockN=39, ec=-1, dirty_flag=0
aml_nand_scan_rsv_info 1134: page_num=16
nkey valid addr: fffffffffffe0000
aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist
ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
ndtb : phy_blk_addr=41, ec=0, phy_page_addr=0, timestamp=2
ndtb free list:
blockN=40, ec=-1, dirty_flag=0
blockN=42, ec=-1, dirty_flag=0
blockN=43, ec=-1, dirty_flag=0
aml_nand_scan_rsv_info 1134: page_num=64
aml_nand_scan_rsv_info 1137
ndtb valid addr: 520000
nddr: info size=0x800 max_scan_blk=46, start_blk=44
nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
nddr free list:
blockN=44, ec=-1, dirty_flag=0
blockN=45, ec=-1, dirty_flag=0
aml_nand_scan_rsv_info 1134: page_num=1
nddr valid addr: fffffffffffe0000
aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist
tpl: off 8388608, size 8388608
Creating 6 MTD partitions on "A revision NAND 2Gib MT29F2G08-A":
0x000000800000-0x000001000000 : "tpl"
0x000001000000-0x000001200000 : "misc"
0x000001200000-0x000002200000 : "recovery"
0x000002200000-0x000004200000 : "boot"
0x000004200000-0x000004700000 : "config"
0x000004700000-0x000010000000 : "nvdata"
A revision NAND 2Gib MT29F2G08-A initialized ok
MMC:   aml_priv->desc_buf = 0x000000000dead560
aml_priv->desc_buf = 0x000000000deaf8a0
SDIO Port B: 0, SDIO Port C: 1
uboot env amlnf_env_read : ####
aml_nand_read_rsv_info:446,read nenv info to 330000
In:    serial
Out:   serial
Err:   serial
aml log : internal sys error!
reboot_mode=cold_boot
[store]To run cmd[amlnf dtb_read 0x1000000 0x40000]
sub cmd dtb
new argv[1] dtb_read
do_dtb_ops(): argc 4
arg 0: amlnf
arg 1: dtb_read
arg 2: 0x1000000
arg 3: 0x40000
do_dtb_ops() read
amlnf_dtb_read: ####
warnning!!! amlnf_dtb_read dtd length too much
aml_nand_read_rsv_info:446,read ndtb info to 520000
do_dtb_ops(): 262144 bytes read : OK
aml log : R2048 check pass!
      Amlogic multi-DTB tool
      GZIP format, decompress...
      Multi DTB detected.
      Multi DTB tool version: v2.
      Support 2 DTBS.
debug ddr size: 0x10000000
checkhw board adc:0
      Found DTB for "axg_s400_v03sbr"
gpio: pin GPIOAO_7 (gpio 7) value is 1
[MSG]usb start
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 1000140 NbrPorts 1
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
fail in cmd [fatsize usb 0 aml_sdc_burn.ini], rcode 1
ERR(../drivers/usb/gadget/v2_burning/v2_usb_burn/optimus_usb_burn.c)L41:The [aml_sdc_burn.ini] not exist in udisk
Net:   sysnopsys gmac3.7
Phy 0 not found
dwmac.ff3f0000amlkey_init() enter!
amlnf_key_read: ####
amlnf_key_read key data len too much
aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4
MACADDR:02:97:ad:94:7e:fc(from chipid)

ramdump_init, add:0, size:0
usb_update_flag=
Start read misc partition datas!
[burnup]Rd:Up sz 0x440 to align 0x1000
info->attemp_times = 0
info->active_slot = 0
info->slot_info[0].bootable = 1
info->slot_info[0].online = 1
info->slot_info[1].bootable = 0
info->slot_info[1].online = 0
info->attemp_times = 0
attemp_times = 0
active slot = 0
wipe_data=successful
wipe_cache=successful
recovery_status=
upgrade_step=2
[aml_i2c_xfer] error ret = -5   i2c master b current slave addr is 0x1f
i2c_write: i2c transfer failed
Error writing the chip: -5
[aml_i2c_xfer] error ret = -5   i2c master b current slave addr is 0x1f
i2c_write: i2c transfer failed
Error writing the chip: -5
[aml_i2c_xfer] error ret = -5   i2c master b current slave addr is 0x1f
i2c_write: i2c transfer failed
Error writing the chip: -5
[aml_i2c_xfer] error ret = -5   i2c master b current slave addr is 0x1f
i2c_write: i2c transfer failed
Error writing the chip: -5
s_version: U-Boot 2015.01
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
s_version: U-Boot 2015.01
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
Hit Enter or space or Ctrl+C key to stop autoboot -- :  0
CONFIG_SYSTEM_AS_ROOT: null
system_mode: 0
[imgread]szTimeStamp[2021111922403917]
[imgread]secureKernelImgSz=0xc2c000
aml log : R-2048 check pass!
aml log : R2048 check pass!
aml log : R2048 check pass!
aml log : R2048 check pass!
avb2: 0
save_power_post ...
avb2: 0
## Booting Android Image at 0x01080000 ...
reloc_addr =ded86d0
copy done
Kernel command line: init=/sbin/init
[store]Is good fdt check header, no need decrypt!
load dtb from 0x1000000 ......
      Amlogic multi-DTB tool
      Single DTB detected
   Uncompressing Kernel Image ... OK
   kernel loaded at 0x01080000, end = 0x0203aa00
   Loading Ramdisk to 0d83b000, end 0de9d000 ... OK
   Loading Device Tree to 000000000d82c000, end 000000000d83a188 ... OK
fdt_fixup_memory_banks, reg:0000000000000000

Starting kernel ...

uboot time: 4224925 us
[    0.000000@0] Booting Linux on physical CPU 0x0
[    0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Fri Nov 19 22:32:14 CST 2021
[    0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[    0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[    0.000000@0] bootconsole [aml_uart0] enabled
[    0.000000@0] efi: Getting EFI parameters from FDT:
[    0.000000@0] efi: UEFI not found.
[    0.000000@0]        07400000 - 07500000,     1024 KB, ramoops@0x07400000
[    0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[    0.000000@0]        05000000 - 05400000,     4096 KB, linux,secmon
[    0.000000@0] __reserved_mem_alloc_size, start:0x000000003e000000, end:0x0000000040000000, len:32 MiB
[    0.000000@0] failed to allocate memory for node linux,meson-fb, size:32 MB
[    0.000000@0] cma: Reserved 8 MiB at 0x000000000f800000
[    0.000000@0] psci: probing for conduit method from DT.
[    0.000000@0] psci: PSCIv1.0 detected in firmware.
[    0.000000@0] psci: Using standard PSCI v0.2 function IDs
[    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000@0] psci: SMC Calling Convention v1.1
[    0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00f753000 s64536 r8192 d29672 u102400
[    0.000000@0] Detected VIPT I-cache on CPU0
[    0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64512
[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 rootfstype=ramfs init=/sbin/init
[    0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000@0] Memory: 219920K/262144K available (8764K kernel code, 1194K rwdata, 2428K rodata, 3648K init, 1018K bss, 29936K reserved, 12288K cma-reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000@0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000@0]       .text : 0xffffff8009080000 - 0xffffff8009910000   (  8768 KB)
[    0.000000@0]     .rodata : 0xffffff8009910000 - 0xffffff8009b80000   (  2496 KB)
[    0.000000@0]       .init : 0xffffff8009b80000 - 0xffffff8009f10000   (  3648 KB)
[    0.000000@0]       .data : 0xffffff8009f10000 - 0xffffff800a03aa00   (  1195 KB)
[    0.000000@0]        .bss : 0xffffff800a03aa00 - 0xffffff800a139534   (  1019 KB)
[    0.000000@0]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)
[    0.000000@0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000@0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000@0]               0xffffffbf00000000 - 0xffffffbf00400000   (     4 MB actual)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc010000000   (   256 MB)
[    0.000000@0] can't find symbol:arm_dma_alloc
[    0.000000@0] can't find symbol:__alloc_from_contiguous
[    0.000000@0] can't find symbol:cma_allocator_alloc
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0]        Build-time adjustment of leaf fanout to 64.
[    0.000000@0]        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000@0]
[    0.000000@0] **********************************************************
[    0.000000@0] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000@0] **                                                      **
[    0.000000@0] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000@0] **                                                      **
[    0.000000@0] ** This means that this is a DEBUG kernel and it is     **
[    0.000000@0] ** unsafe for production use.                           **
[    0.000000@0] **                                                      **
[    0.000000@0] ** If you see this message and you are not debugging    **
[    0.000000@0] ** the kernel, report this immediately to your vendor!  **
[    0.000000@0] **                                                      **
[    0.000000@0] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000@0] **********************************************************
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000@0] axg_aoclkc_init: register ao clk ok![    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0] axg_amlogic_init_media: register meson media clk
[    0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[    0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[    0.000000@0] axg_clkc_init initialization complete
[    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[    0.016907@0] Console: colour dummy device 80x25
[    0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.031586@0] pid_max: default: 32768 minimum: 301
[    0.036439@0] thread_stack_cache_init, vmap:ffffffc00edaf600, bitmap:ffffffc00eda3000, cache page:ede0
[    0.045773@0] thread_stack_cache_init, allocation vm area:ffffffc00edd94c0, addr:ffffff8020000000, size:20001000
[    0.056005@0] cpu 0, vmap_stack:[ffffffc00f75c960-ffffffc00f760950]
[    0.062304@0] cpu 0, irq_stack: [ffffffc00f753060-ffffffc00f757050]
[    0.068603@0] cpu 1, vmap_stack:[ffffffc00f775960-ffffffc00f779950]
[    0.074903@0] cpu 1, irq_stack: [ffffffc00f76c060-ffffffc00f770050]
[    0.081203@0] cpu 2, vmap_stack:[ffffffc00f78e960-ffffffc00f792950]
[    0.087503@0] cpu 2, irq_stack: [ffffffc00f785060-ffffffc00f789050]
[    0.093803@0] cpu 3, vmap_stack:[ffffffc00f7a7960-ffffffc00f7ab950]
[    0.100103@0] cpu 3, irq_stack: [ffffffc00f79e060-ffffffc00f7a2050]
[    0.106465@0] Security Framework initialized
[    0.110696@0] SELinux:  Initializing.
[    0.114428@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.121108@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.128873@0] ftrace: allocating 30089 entries in 118 pages
[    0.184510@0] sched-energy: CPU device node has no sched-energy-costs
[    0.185326@0] CPU0: update cpu_capacity 1024
[    0.189652@0] ASID allocator initialised with 32768 entries
[    0.227632@0] secmon: can't fine clear_range
[    0.227841@0] EFI services will not be available.
[    0.231112@0] Meson chip version = RevC (25:C - 23:0)
[    0.264979@1] Detected VIPT I-cache on CPU1
[    0.265040@1] CPU1: update cpu_capacity 1024
[    0.265042@1] CPU1: Booted secondary processor [410fd034]
[    0.293040@2] Detected VIPT I-cache on CPU2
[    0.293096@2] CPU2: update cpu_capacity 1024
[    0.293098@2] CPU2: Booted secondary processor [410fd034]
[    0.321116@3] Detected VIPT I-cache on CPU3
[    0.321169@3] CPU3: update cpu_capacity 1024
[    0.321171@3] CPU3: Booted secondary processor [410fd034]
[    0.321262@0] Brought up 4 CPUs
[    0.360482@0] SMP: Total of 4 processors activated.
[    0.365390@0] CPU features: detected feature: 32-bit EL0 Support
[    0.371427@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.381994@0] CPU: All CPU(s) started at EL2
[    0.383167@0] alternatives: patching kernel code
[    0.388493@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[    0.395698@0] devtmpfs: initialized
[    0.411161@0] DMI not present or invalid.
[    0.411522@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.419546@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.426106@0] pinctrl core: initialized pinctrl subsystem
[    0.432534@0] NET: Registered protocol family 16
[    0.452056@0] cpuidle: using governor menu
[    0.452549@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[    0.458169@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[    0.465578@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.471744@0] clkmsr: clkmsr: driver init
[    0.475764@0] aml_watch_point_probe, in, wp:2
[    0.480363@0] pstore: using zlib compression
[    0.484708@0] console [pstore-1] enabled
[    0.488041@0] pstore: Registered ramoops as persistent store backend
[    0.494454@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
domain-0 init dvfs: 3
[    0.508799@0] aml_iomap: amlogic iomap probe done
[    0.515765@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[    0.517701@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.618064@0] usbcore: registered new interface driver usbfs
[    0.618239@0] usbcore: registered new interface driver hub
[    0.623852@0] usbcore: registered new device driver usb
[    0.629140@0] pps_core: LinuxPPS API ver. 1 registered
[    0.634088@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.643474@0] PTP clock support registered
[    0.647834@0] dmi: Firmware registration failed.
[    0.656640@0] secmon: reserve_mem_size:0x300000
[    0.656784@0] secmon secmon: assigned reserved memory node linux,secmon
[    0.663792@0] secmon: get page:ffffffbf00140000, 5000
[    0.668466@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[    0.676827@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    0.684735@0] NetLabel: Initializing
[    0.686877@0] NetLabel:  domain hash size = 128
[    0.691464@0] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.696718@0] NetLabel:  unlabeled traffic allowed by default
[    0.703305@0] clocksource: Switched to clocksource arch_sys_counter
[    0.832758@0] VFS: Disk quotas dquot_6.6.0
[    0.832906@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.859843@1] NET: Registered protocol family 2
[    0.860944@1] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.866103@1] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[    0.872770@1] TCP: Hash tables configured (established 2048 bind 2048)
[    0.879355@1] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.885304@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.892046@1] NET: Registered protocol family 1
[    0.897021@1] RPC: Registered named UNIX socket transport module.
[    0.902435@1] RPC: Registered udp transport module.
[    0.907326@1] RPC: Registered tcp transport module.
[    0.912214@1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.921441@1] Unpacking initramfs...
[    1.421674@3] Initramfs unpacking failed: junk in compressed archive
[    1.428528@3] Freeing initrd memory: 6536K
[    1.429403@3] hw perfevents: clusterb_enabled = 0
[    1.431780@3] hw perfevents: cpumasks 0xf, 0x0
[    1.436248@3] hw perfevents: cluster A irq = 7
[    1.440814@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.450979@3] audit: initializing netlink subsys (disabled)
[    1.454377@3] audit: type=2000 audit(1.268:1): initialized
[    1.461681@3] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[    1.486533@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.489593@3] NFS: Registering the id_resolver key type
[    1.492263@3] Key type id_resolver registered
[    1.496569@3] Key type id_legacy registered
[    1.501204@3] fuse init (API version 7.26)
[    1.513161@3] NET: Registered protocol family 38
[    1.513219@3] Key type asymmetric registered
[    1.516465@3] Asymmetric key parser 'x509' registered
[    1.521965@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.529162@3] io scheduler noop registered (default)
[    1.534130@3] io scheduler deadline registered
[    1.539030@3] io scheduler cfq registered
[    1.560049@2] random: fast init done
[    1.560149@2] random: crng init done
[    1.560622@3] Unable to detect cache hierarchy for CPU 0
[    1.603337@3] loop: module loaded
[    1.604937@3] zram: Added device: zram0
[    1.605359@3] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.612105@3] libphy: Fixed MDIO Bus: probed
[    1.616634@3] tun: Universal TUN/TAP device driver, 1.6
[    1.621088@3] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.629293@3]  ee eth reset:Addr = ffffff80081fd008
[    1.636806@3] meson6-dwmac ff3f0000.ethernet: no reset control found
[    1.638730@3] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    1.644011@3]  Ring mode enabled
[    1.647210@3]  DMA HW capability register supported[    1.651953@3]  Normal descriptors
[    1.655259@3]  RX Checksum Offload Engine supported
[    1.660184@3]        COE Type 2
[    1.662783@3]  TX Checksum insertion supported
[    1.667262@3]  Wake-Up On Lan supported
[    1.671215@3]  Enable RX Mitigation via HW Watchdog Timer
[    1.679356@3] libphy: stmmac: probed
[    1.680114@3] eth%d: No PHY found

kibob · 21 сен 2023, 11:28

Здравствуйте! Помогите найти контрольную плату на майнер. Или помогите советом что можно сделать...
Ситуация следующая: имеется несколько майнеров, на них написано s19a_100T, но в интернете везде где есть инфа про s19a написано, что он должен иметь БП awp12, потреблять 3400вт, иметь новый интерфейс прошивки как во всех s19, иметь по 72чипа на плате. Мой майнер имеет БП awp9+, потребляет 3000вт, имеет старый интерфейс прошивки как у s17, и 91чип на плате.
Проблема в том, что что есть 3 таких майнера, 1 рабочий и 2 без контрольных плат.

Какую и где купить контрольную плату, если майнер какойто нестандартный и, видимо, "левый"? На моем контролька Ctrl_C52 Vers V2.1030, почти как на s17+ (там Ctrl_C52 Vers V2.1020). То что продается для s19, вроде других версий(Ctrl_C55).

Мне сказали, что мол можно вытащить дамп прошивки с рабочей контрольной платы и зашить его в другую. Возможно ли это? Может кто то подскажет в каком сервисе можно это провернуть.

Спойлер

Изменено 22 сен 2023, 09:28 пользователем kibob
Убрал лишнее

n101 · 27 окт 2023, 11:10

Добрый день, в наличии bitmain s19 pro 110 и s19 105 j pro

С наступлением холодов (около 0) хешрейт всех 105 снизился минимум на 10%, 85-95 TH, причем сразу у всех 105, при этом часть 110 работают стабильно.

В отеле посмотрели и предложили поставить тепловую пушку, объяснив что причина в том, что 105 стоят в самой холодной зоне.

Вопрос: на сколько уместно ставить пушку в месте где и так по идее должно быть тепло, может быть не в рабочем диапазоне, но все же, и кто сталкивался с подобным?

knop · 27 окт 2023, 11:43

@n101 Это ещё с S9 было на оригинальной прошивке. Просто часть асиков разверни и пусть они подогревают входящий воздух.

Powerslide · 8 ноя 2023, 18:01

Чутка статистики по аппаратам, купил 86тх на 88чипах, сейчас можно найти по 660усдт в Москве, и 90тх на 126чипах есть по 1030усдт.

Прошивку брал официальную, с сайта, и просто прошивал ЕЕПРОМ в хэшки, давал поработать 30+ часов, потребление смотрел ваттметром, а хешрейт среднесуточный бинанс показывает, результаты следующие:

90тх/126 сток - 91тх на пуле, 2950вт из розетки, на шитых еепром - 91-92 на пуле при потреблении 2600, в лоу режим не переходит на шитых еепром, мучиться не стал, надо подбирать. Эти же аппараты на вниш выдали такие же результаты, но с учётом комиссии разрабов выходило около 87-88 при потреблении 2600, разве что у вниша есть профиль 67тх, на нем получил чуть больше 65тх на пуле, при 1650вт по ваттметру. Другие ЕЕПРОМ пользовал, но дальше 98тх при 3000вт подняться не получилось, поэтому остановился на даунвольте.

86тх/88 сток - 87тх на пуле при 3100вт, лоу режим 65+тх на пуле при 2100вт, после прошивки ЕЕПРОМ получил 90-91тх на пуле при 3100Вт, в лоу режим выходят и получаем 69+ при 2100вт.

ЕЕПРОМ на для таких аппаратов меньше и с меньшими диапазонами, вниш не накатывал.

Есть более экстремальные прошивки, но их не использую, так как падает соотношение вт/тх.

bvv79 · 20 дек 2023, 16:45

Коллеги хэлп, S19k pro 120th, прошил оф новой merge прошивкой и кирпич. sd recovery не накатывается. Пулы видит, кульки на максимум, горит зеленым-красным, не майнит. Замена на контрольку с рабочего также не помогла. AMLogic, лог в спойлере.

Спойлер

[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Nov 15 15:23:45 CST 2023
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0]    07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0]    05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 211580K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 30084K reserved, 20480K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139034 ( 1018 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0]    Build-time adjustment of leaf fanout to 64.
[ 0.000000@0]    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016906@0] Console: colour dummy device 80x25
[ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031587@0] pid_max: default: 32768 minimum: 301
[ 0.036437@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[ 0.045773@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[ 0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[ 0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[ 0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[ 0.074904@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[ 0.081204@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[ 0.087504@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[ 0.093804@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[ 0.100104@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[ 0.106465@0] Security Framework initialized
[ 0.110697@0] SELinux: Initializing.
[ 0.114388@0] SELinux: Starting in permissive mode
[ 0.114424@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121108@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128840@0] ftrace: allocating 30061 entries in 118 pages
[ 0.186593@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.187401@0] CPU0: update cpu_capacity 1024
[ 0.191730@0] ASID allocator initialised with 32768 entries
[ 0.229867@0] secmon: can't fine clear_range
[ 0.230072@0] EFI services will not be available.
[ 0.233339@0] Meson chip version = RevC (25:C - 23:0)
[ 0.267018@1] Detected VIPT I-cache on CPU1
[ 0.267078@1] CPU1: update cpu_capacity 1024
[ 0.267080@1] CPU1: Booted secondary processor [410fd034]
[ 0.295070@2] Detected VIPT I-cache on CPU2
[ 0.295121@2] CPU2: update cpu_capacity 1024
[ 0.295124@2] CPU2: Booted secondary processor [410fd034]
[ 0.323137@3] Detected VIPT I-cache on CPU3
[ 0.323188@3] CPU3: update cpu_capacity 1024
[ 0.323191@3] CPU3: Booted secondary processor [410fd034]
[ 0.323278@0] Brought up 4 CPUs
[ 0.362495@0] SMP: Total of 4 processors activated.
[ 0.367404@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.373440@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.383996@0] CPU: All CPU(s) started at EL2
[ 0.385180@0] alternatives: patching kernel code
[ 0.390477@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.397704@0] devtmpfs: initialized
[ 0.412764@0] DMI not present or invalid.
[ 0.413152@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.421135@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427706@0] pinctrl core: initialized pinctrl subsystem
[ 0.434100@0] NET: Registered protocol family 16
[ 0.457653@0] cpuidle: using governor menu
[ 0.458161@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.463765@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.471163@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.477322@0] clkmsr: clkmsr: driver init
[ 0.481373@0] aml_watch_point_probe, in, wp:2
[ 0.486801@0] pstore: using zlib compression
[ 0.490202@0] console [pstore-1] enabled
[ 0.493641@0] pstore: Registered ramoops as persistent store backend
[ 0.500041@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.514395@0] aml_iomap: amlogic iomap probe done
[ 0.521213@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.523146@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.623613@0] usbcore: registered new interface driver usbfs
[ 0.623758@0] usbcore: registered new interface driver hub
[ 0.629418@0] usbcore: registered new device driver usb
[ 0.634693@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.639617@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.649006@0] PTP clock support registered
[ 0.653349@0] dmi: Firmware registration failed.
[ 0.658347@0] secmon: reserve_mem_size:0x300000
[ 0.662372@0] secmon secmon: assigned reserved memory node linux,secmon
[ 0.669261@0] secmon: get page:ffffffbf00140000, 5000
[ 0.673987@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.682373@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.690237@0] NetLabel: Initializing
[ 0.692425@0] NetLabel: domain hash size = 128
[ 0.697013@0] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.702241@0] NetLabel: unlabeled traffic allowed by default
[ 0.708878@0] clocksource: Switched to clocksource arch_sys_counter
[ 0.835638@0] VFS: Disk quotas dquot_6.6.0
[ 0.835785@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.862006@0] NET: Registered protocol family 2
[ 0.863057@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.868295@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.874916@0] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.881521@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.887464@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.894203@0] NET: Registered protocol family 1
[ 0.899160@0] RPC: Registered named UNIX socket transport module.
[ 0.904601@0] RPC: Registered udp transport module.
[ 0.909486@0] RPC: Registered tcp transport module.
[ 0.914376@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.923505@0] Unpacking initramfs...
[ 1.432052@3] Initramfs unpacking failed: junk in compressed archive
[ 1.438962@3] Freeing initrd memory: 6680K
[ 1.439902@3] hw perfevents: clusterb_enabled = 0
[ 1.442193@3] hw perfevents: cpumasks 0xf, 0x0
[ 1.446686@3] hw perfevents: cluster A irq = 7
[ 1.451246@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.461447@3] audit: initializing netlink subsys (disabled)
[ 1.464744@3] audit: type=2000 audit(1.276:1): initialized
[ 1.472052@3] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.496295@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.499206@2] NFS: Registering the id_resolver key type
[ 1.502099@2] Key type id_resolver registered
[ 1.506333@2] Key type id_legacy registered
[ 1.510980@2] fuse init (API version 7.26)
[ 1.516309@2] SELinux: Registering netfilter hooks
[ 1.522496@2] NET: Registered protocol family 38
[ 1.522557@2] Key type asymmetric registered
[ 1.525799@2] Asymmetric key parser 'x509' registered
[ 1.531280@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.538504@2] io scheduler noop registered (default)
[ 1.543542@2] io scheduler deadline registered
[ 1.548278@2] io scheduler cfq registered
[ 1.568816@0] random: fast init done
[ 1.568986@0] random: crng init done
[ 1.570359@2] Unable to detect cache hierarchy for CPU 0
[ 1.607706@2] loop: module loaded
[ 1.613235@2] zram: Added device: zram0
[ 1.613692@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.618648@2] libphy: Fixed MDIO Bus: probed
[ 1.623306@2] tun: Universal TUN/TAP device driver, 1.6
[ 1.627670@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.635878@2] ee eth reset:Addr = ffffff80081fd008
[ 1.643370@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.645335@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.650572@2] Ring mode enabled
[ 1.653799@2] DMA HW capability register supported
[ 1.658531@2] Normal descriptors
[ 1.661846@2] RX Checksum Offload Engine supported
[ 1.666755@2]    COE Type 2
[ 1.669371@2] TX Checksum insertion supported
[ 1.673837@2] Wake-Up On Lan supported
[ 1.677784@2] Enable RX Mitigation via HW Watchdog Timer
[ 1.691228@2] libphy: stmmac: probed
[ 1.691280@2] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[ 1.697733@2] PPP generic driver version 2.4.2
[ 1.700662@2] PPP BSD Compression module registered
[ 1.705214@2] PPP Deflate Compression module registered
[ 1.710461@2] PPP MPPE Compression module registered
[ 1.715426@2] NET: Registered protocol family 24
[ 1.720936@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.726813@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.733870@2] usbcore: registered new interface driver cdc_acm
[ 1.739069@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.747506@2] usbcore: registered new interface driver usbserial
[ 1.754158@2] mousedev: PS/2 mouse device common for all mice
[ 1.759598@2] usbcore: registered new interface driver xpad
[ 1.765041@2] i2c /dev entries driver
[ 1.769819@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.774027@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.784974@2] ff803000.serial: clock gate not found
[ 1.786538@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.793747@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.808686@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.811395@2] console [ttyS0] enabled
[ 1.818607@2] bootconsole [aml_uart0] disabled
[ 1.828274@1] ff804000.serial: clock gate not found
[ 1.832399@1] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.839518@1] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.849886@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 1.855991@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.866187@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 1.872472@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 1.883417@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 1.892734@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 1.899218@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 1.914246@0] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.918058@0] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.930387@0] aml_dma ff63e000.aml_dma: Aml dma
[ 1.933530@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 1.938546@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 1.944943@0] efusekeynum: 4
[ 1.947234@0] efusekeyname: mac   offset: 0   size: 6
[ 1.953676@0] efusekeyname: mac_bt   offset: 6   size: 6
[ 1.960086@0] efusekeyname: mac_wifi   offset: 12   size: 6
[ 1.966492@0] efusekeyname: usid   offset: 18   size: 16
[ 1.973329@3] efuse efuse: probe OK!
[ 1.978776@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 1.986041@3] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 1.991072@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 1.996299@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.041020@3] meson-mmc: meson_mmc_probe() : success!
[ 2.041273@3] amlogic mtd driver init
[ 2.045326@3] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.050083@3] bl mode descrete
[ 2.052966@3] fip_copies 4
[ 2.055630@3] fip_size 0x200000
[ 2.058770@3] nand_clk_ctrl 0xffe07000
[ 2.062493@3] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.068161@3] nand_clk_ctrl 0xffe07000
[ 2.071883@3] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.080620@3] plat->aml_nand_device ffffff800a005c10
[ 2.084812@3] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.090858@3] NAND device id: 98 da 90 15 76 16
[ 2.095089@3] NAND device: Manufacturer ID:
[ 2.099156@3] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.106719@3] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.112153@3] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.117702@3] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.123947@3] mtd->oobavail: 0x8
[ 2.127331@3] aml_nand_init 2119: plat-name:bootloader
[ 2.132266@3] Creating 1 MTD partitions on "bootloader":
[ 2.137555@3] 0x000000000000-0x000000200000 : "bootloader"
[ 2.146685@1] bootloader initialized ok
[ 2.146814@1] plat->aml_nand_device ffffff800a005c10
[ 2.151798@1] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.157930@1] NAND device id: 98 da 90 15 76 16
[ 2.162095@1] NAND device: Manufacturer ID:
[ 2.166167@1] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.173723@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.179155@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.184696@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.190949@1] mtd->oobavail: 0x8
[ 2.194418@1] aml_nand_init 2119: plat-name:nandnormal
[ 2.199302@1] bbt_start=20
[ 2.201943@1] env_start=24
[ 2.204607@1] key_start=32
[ 2.207312@1] dtb_start=40
[ 2.209997@1] ddr_start=44
[ 2.212671@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.219209@1] get_free_node 43: bitmap=0
[ 2.222656@1] get_free_node 55: bitmap=1
[ 2.226759@1] get_free_node 43: bitmap=1
[ 2.230454@1] get_free_node 55: bitmap=3
[ 2.234558@1] get_free_node 43: bitmap=3
[ 2.238254@1] get_free_node 55: bitmap=7
[ 2.242154@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.248824@1] nbbt free list:
[ 2.251772@1] blockN=21, ec=-1, dirty_flag=0
[ 2.256019@1] blockN=22, ec=-1, dirty_flag=0
[ 2.260265@1] blockN=23, ec=-1, dirty_flag=0
[ 2.264512@1] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.269948@1] nbbt valid addr: 280000
[ 2.273182@1] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.278814@1] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.285087@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.291528@1] get_free_node 43: bitmap=7
[ 2.295020@1] get_free_node 55: bitmap=f
[ 2.299125@1] get_free_node 43: bitmap=f
[ 2.302820@1] get_free_node 55: bitmap=1f
[ 2.307011@1] get_free_node 43: bitmap=1f
[ 2.310794@1] get_free_node 55: bitmap=3f
[ 2.314985@1] get_free_node 43: bitmap=3f
[ 2.318767@1] get_free_node 55: bitmap=7f
[ 2.322958@1] get_free_node 43: bitmap=7f
[ 2.326740@1] get_free_node 55: bitmap=ff
[ 2.330932@1] get_free_node 43: bitmap=ff
[ 2.334714@1] get_free_node 55: bitmap=1ff
[ 2.338991@1] get_free_node 43: bitmap=1ff
[ 2.342858@1] get_free_node 55: bitmap=3ff
[ 2.346934@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.353604@1] nenv free list:
[ 2.356535@1] blockN=25, ec=-1, dirty_flag=0
[ 2.360799@1] blockN=26, ec=-1, dirty_flag=0
[ 2.365045@1] blockN=27, ec=-1, dirty_flag=0
[ 2.369291@1] blockN=28, ec=-1, dirty_flag=0
[ 2.373538@1] blockN=29, ec=-1, dirty_flag=0
[ 2.377785@1] blockN=30, ec=-1, dirty_flag=0
[ 2.382031@1] blockN=31, ec=-1, dirty_flag=0
[ 2.386278@1] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.404349@1] nenv valid addr: 310000
[ 2.404382@1] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.408757@1] get_free_node 43: bitmap=3ff
[ 2.412627@1] get_free_node 55: bitmap=7ff
[ 2.416917@1] get_free_node 43: bitmap=7ff
[ 2.420755@1] get_free_node 55: bitmap=fff
[ 2.425079@1] get_free_node 43: bitmap=fff
[ 2.428921@1] get_free_node 55: bitmap=1fff
[ 2.433285@1] get_free_node 43: bitmap=1fff
[ 2.437240@1] get_free_node 55: bitmap=3fff
[ 2.441604@1] get_free_node 43: bitmap=3fff
[ 2.445560@1] get_free_node 55: bitmap=7fff
[ 2.449924@1] get_free_node 43: bitmap=7fff
[ 2.453880@1] get_free_node 55: bitmap=ffff
[ 2.458244@1] get_free_node 43: bitmap=ffff
[ 2.462200@1] get_free_node 55: bitmap=1ffff
[ 2.466651@1] get_free_node 43: bitmap=1ffff
[ 2.470693@1] get_free_node 55: bitmap=3ffff
[ 2.474938@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.481611@1] nkey free list:
[ 2.484541@1] blockN=32, ec=-1, dirty_flag=0
[ 2.488805@1] blockN=33, ec=-1, dirty_flag=0
[ 2.493051@1] blockN=34, ec=-1, dirty_flag=0
[ 2.497298@1] blockN=35, ec=-1, dirty_flag=0
[ 2.501544@1] blockN=36, ec=-1, dirty_flag=0
[ 2.505791@1] blockN=37, ec=-1, dirty_flag=0
[ 2.510038@1] blockN=38, ec=-1, dirty_flag=0
[ 2.514284@1] blockN=39, ec=-1, dirty_flag=0
[ 2.518531@1] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.523644@1] nkey valid addr: fffffffffffe0000
[ 2.528152@1] aml_nand_key_check 1251 NO key exist
[ 2.532920@1] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.539566@1] get_free_node 43: bitmap=3ffff
[ 2.543407@1] get_free_node 55: bitmap=7ffff
[ 2.547858@1] get_free_node 43: bitmap=7ffff
[ 2.551900@1] get_free_node 55: bitmap=fffff
[ 2.556352@1] get_free_node 43: bitmap=fffff
[ 2.560394@1] get_free_node 55: bitmap=1fffff
[ 2.564727@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[ 2.571397@1] ndtb free list:
[ 2.574345@1] blockN=41, ec=-1, dirty_flag=0
[ 2.578591@1] blockN=42, ec=-1, dirty_flag=0
[ 2.582838@1] blockN=43, ec=-1, dirty_flag=0
[ 2.587083@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.605156@1] ndtb valid addr: 500000
[ 2.605190@1] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.609652@1] get_free_node 43: bitmap=1fffff
[ 2.613780@1] get_free_node 55: bitmap=3fffff
[ 2.618318@1] get_free_node 43: bitmap=3fffff
[ 2.622446@1] get_free_node 55: bitmap=7fffff
[ 2.626780@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.633450@1] nddr free list:
[ 2.636381@1] blockN=44, ec=-1, dirty_flag=0
[ 2.640645@1] blockN=45, ec=-1, dirty_flag=0
[ 2.644892@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.650004@1] nddr valid addr: fffffffffffe0000
[ 2.654511@1] aml_nand_ddr_check 1281 NO ddr exist
[ 2.659282@1] tpl: off 8388608, size 8388608
[ 2.757277@1] NAND bbt detect factory Bad block at c000000
[ 2.757329@1] aml_nand_add_partition:394 factory bad addr=600
[ 2.763008@1] NAND bbt detect factory Bad block at c020000
[ 2.768508@1] aml_nand_add_partition:394 factory bad addr=601
[ 2.808038@1] Creating 6 MTD partitions on "nandnormal":
[ 2.808085@1] 0x000000800000-0x000001000000 : "tpl"
[ 2.819332@3] 0x000001000000-0x000001200000 : "misc"
[ 2.823081@0] 0x000001200000-0x000002200000 : "recovery"
[ 2.835173@0] 0x000002200000-0x000004200000 : "boot"
[ 2.854940@0] 0x000004200000-0x000004700000 : "config"
[ 2.860484@0] 0x000004700000-0x000010000000 : "nvdata"
[ 2.925032@0] NAND bbt detect factory Bad block at c000000
[ 2.925146@0] NAND bbt detect factory Bad block at c020000
[ 2.966456@0] nandnormal initialized ok
[ 2.966564@0] aml_ubootenv_init: register env chardev
[ 2.970148@0] aml_ubootenv_init: register env chardev OK
[ 2.975134@0] amlnf_dtb_init: register dtb cdev
[ 2.979854@0] amlnf_dtb_init: register dtd cdev OK
[ 2.984305@0] mtd_nand_probe 267 , err = 0
[ 2.989442@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 2.994857@0] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 3.002060@0] unifykey: storage in base: 0xffffffc005000000
[ 3.006490@0] unifykey: storage out base: 0xffffffc005040000
[ 3.012102@0] unifykey: storage block base: 0xffffffc005080000
[ 3.017896@0] unifykey: probe done!
[ 3.022077@0] unifykey: no efuse-version set, use default value: -1
[ 3.027619@0] unifykey: key unify config unifykey-num is 6
[ 3.033149@0] unifykey: key unify fact unifykey-num is 6
[ 3.038356@0] unifykey: unifykey_devno: f200000
[ 3.043345@1] unifykey: device unifykeys created ok
[ 3.047860@1] unifykey: aml_unifykeys_init done!
[ 3.052756@1] sysled: module init
[ 3.056221@1] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.061002@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.068364@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.077244@1] dmc_monitor_probe
[ 3.083453@1] defendkey defendkey: Reserved memory is not enough!
[ 3.083948@1] defendkey: probe of defendkey failed with error -22
[ 3.090368@1] GACT probability NOT on
[ 3.093689@1] Mirror/redirect action on
[ 3.097471@1] u32 classifier
[ 3.100298@1] Actions configured
[ 3.103885@1] Netfilter messages via NETLINK v0.30.
[ 3.109167@1] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.115342@1] ctnetlink v0.93: registering with nfnetlink.
[ 3.121242@1] xt_time: kernel timezone is -0000
[ 3.124936@1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.131593@1] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.136284@1] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.141753@1] Initializing XFRM netlink socket
[ 3.147262@1] NET: Registered protocol family 10
[ 3.153320@1] mip6: Mobile IPv6
[ 3.153824@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.159792@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.167806@1] NET: Registered protocol family 17
[ 3.170073@1] NET: Registered protocol family 15
[ 3.174672@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.187826@1] l2tp_core: L2TP core driver, V2.0
[ 3.192209@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.197137@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.202883@1] l2tp_netlink: L2TP netlink interface
[ 3.207673@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.213750@1] l2tp_debugfs: L2TP debugfs support
[ 3.218284@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.224979@1] NET: Registered protocol family 35
[ 3.229859@1] Key type dns_resolver registered
[ 3.234451@1] Registered swp emulation handler
[ 3.238315@1] Registered cp15_barrier emulation handler
[ 3.243505@1] Registered setend emulation handler
[ 3.248245@1] disable EAS feature
[ 3.252799@0] registered taskstats version 1
[ 3.269434@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.775882@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.775968@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.784253@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.792692@1] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.800150@3] hub 1-0:1.0: USB hub found
[ 3.802654@3] hub 1-0:1.0: 1 port detected
[ 3.807243@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.812266@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.820163@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.829777@1] hub 2-0:1.0: USB hub found
[ 3.832217@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.839554@1] usb usb2: Unsupported the hub
[ 3.844307@1] aml_vrtc rtc: setting system clock to 2023-12-15 19:29:35 UTC (1702668575)
[ 3.852374@1] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d1a3000)
[ 3.852453@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.860345@1] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.860358@1] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00b414800
[ 3.960785@2] dwc_otg: Core Release: 3.10a
[ 3.960837@2] dwc_otg: Setting default values for core params
[ 3.965027@2] dwc_otg: curmode: 0, host_only: 0
[ 3.969530@2] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 3.982039@2] dwc_otg: Using Buffer DMA mode
[ 3.982076@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.985982@2] dwc_otg: Working on port type = SLAVE
[ 3.990839@2] dwc_otg: Dedicated Tx FIFOs mode
[ 3.997881@0] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 4.004532@0] cpucore_cooling_register, max_cpu_core_num:4
[ 4.017188@0] gxbb_pm: enter meson_pm_probe!
[ 4.017246@0] no vddio3v3_en pin
[ 4.018897@0] pm-meson aml_pm: Can't get switch_clk81
[ 4.023988@0] gxbb_pm: meson_pm_probe done
[ 4.028984@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.035311@0] Freeing unused kernel memory: 3648K
[ 4.049620@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.301143@2] ubi0: attaching mtd5
[ 4.320741@2] ubi0: scanning is finished
[ 4.325960@1] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.326088@1] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.333154@1] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.340059@1] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.347167@1] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.353225@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.360601@1] ubi0: max/mean erase counter: 6/2, WL threshold: 4096, image sequence number: 710726911
[ 4.369778@1] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.379042@2] ubi0: background thread "ubi_bgt0d" started, PID 1076
[ 4.392132@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080
[ 4.431083@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.433500@0] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.443536@0] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.453776@0] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.460351@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 950B2183-F094-4EBA-BA99-625C9569A8EE, small LPT model
[ 4.484549@1] ubi2: attaching mtd6
[ 4.951411@1] NAND bbt detect factory Bad block at c000000
[ 4.951537@1] NAND bbt detect factory Bad block at c020000
[ 5.202921@1] ubi2: scanning is finished
[ 5.210566@0] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.210868@0] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.217926@0] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.224908@3] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.231988@3] ubi2: good PEBs: 1478, bad PEBs: 2, corrupted PEBs: 0
[ 5.238193@3] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.245548@3] ubi2: max/mean erase counter: 13/6, WL threshold: 4096, image sequence number: 1061846921
[ 5.254913@3] ubi2: available PEBs: 0, total reserved PEBs: 1478, PEBs reserved for bad PEB handling: 2
[ 5.264365@1] ubi2: background thread "ubi_bgt2d" started, PID 1088
[ 5.277330@2] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1092
[ 5.316160@0] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdada_log"
[ 5.318506@0] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.328525@0] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.339362@0] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.346120@0] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 04F8E51F-964B-479B-B7E9-A2C48855FEC7, small LPT model
[ 5.573813@3] eth0: device MAC address 02:e0:21:4b:4c:e7
[ 5.657986@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.659270@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.907874@3] uart_trans: loading out-of-tree module taints kernel.
[ 5.910260@3] register uart_trans chrdev success.
[ 5.913680@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 5.921260@3] tty port open success [/dev/ttyS3]!
[ 5.926083@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 5.934454@3] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 5.940493@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 5.948143@3] tty port open success [/dev/ttyS2]!
[ 5.952815@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 5.961186@3] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 5.967337@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 5.974993@3] tty port open success [/dev/ttyS1]!
[ 5.979661@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 5.988068@3] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 5.994363@0] create workqueue success!
[ 7.705152@0] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 7.708444@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.149450@0] uart trans dev open.
[ 28.149578@0] uart_buf virt addr = 0xffffffc00b140000
[ 28.152287@0] uart_buf phys addr = 0x0b140000
[ 28.156653@0] uart_buf pfn = 0x0000b140
[ 28.161050@0] uart trans stop send work timer.
[ 28.165689@0] uart trans set chain exist bits:0x7.
[ 28.170334@0] uart trans set work queue count 768.
[ 141.243187@1] uart set baud to: 4098
[ 141.243247@1] uart set baud to: 4098
[ 141.244708@1] uart set baud to: 4098
[ 148.800200@1] uart trans stop send work timer.
[ 164.196027@1] uart trans start send work timer.
[ 190.800222@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.

===========================================Miner log===========================================
2023-12-15 19:29:42 Miner compile time: Wed Nov 15 14:47:56 CST 2023 type: Antminer S19k Pro sn :JYZZAEUBCJHCA0B1H
2023-12-15 19:29:43 This is fix-freq version
2023-12-15 19:29:43 Miner compile time: Wed Nov 15 14:47:56 CST 2023 type: Antminer S19k Pro
2023-12-15 19:29:43 Miner sn: JYZZAEUBCJHCA0B1H
2023-12-15 19:29:43 commit version: 143b498a 2023-11-09 14:37:23, build by: jenkins 2023-11-15 15:11:08
2023-12-15 19:29:43 opt_multi_version = 1
2023-12-15 19:29:43 opt_bitmain_ab = 1
2023-12-15 19:29:43 mid_auto_gen = 1
2023-12-15 19:29:43 opt_bitmain_work_mode = 0
2023-12-15 19:29:43 port 439 already exported
2023-12-15 19:29:43 port 454 already exported
2023-12-15 19:29:43 port 440 already exported
2023-12-15 19:29:43 port 455 already exported
2023-12-15 19:29:43 port 441 already exported
2023-12-15 19:29:43 port 456 already exported
2023-12-15 19:29:44 port 438 already exported
2023-12-15 19:29:44 port 453 already exported
2023-12-15 19:29:44 port 446 already exported
2023-12-15 19:29:44 port 445 already exported
2023-12-15 19:29:44 Note: front fan is power on!
2023-12-15 19:29:44 Note: rear fan is power on!
2023-12-15 19:29:44 start the http log.
2023-12-15 19:29:44 httpListenThread start ret=0
2023-12-15 19:29:44 start listen on 6060 ...
2023-12-15 19:29:44 load machine BHB56902 conf
2023-12-15 19:29:44 machine : BHB56902
2023-12-15 19:29:44 get test_loop_securely_find_asic_num failed
2023-12-15 19:29:44 get high_temp_sub_freq failed,set default high_temp_sub_freq = 10
2023-12-15 19:29:44 abandon mix board!
2023-12-15 19:29:44 get mix boardname[0][BHB56902], name:BHB56902
2023-12-15 19:29:44 bad chain id = 3
2023-12-15 19:29:47 bad chain id = 3
2023-12-15 19:29:49 power off
2023-12-15 19:29:50 ==========================capability start==========================
2023-12-15 19:29:50 board num = 3
2023-12-15 19:29:50 board id = 0, chain num = 1
2023-12-15 19:29:50    chain id = 0
2023-12-15 19:29:50 board id = 1, chain num = 1
2023-12-15 19:29:50    chain id = 1
2023-12-15 19:29:50 board id = 2, chain num = 1
2023-12-15 19:29:50    chain id = 2
2023-12-15 19:29:50 ==========================capability end============================
2023-12-15 19:29:50 chain num = 3
2023-12-15 19:29:53 load chain 0 eeprom data
2023-12-15 19:29:56 load chain 1 eeprom data
2023-12-15 19:30:00 load chain 2 eeprom data
2023-12-15 19:30:00 eeprom load ret:0
2023-12-15 19:30:00 miner:BHB56901,board_name:BHB56902
2023-12-15 19:30:00 miner:BHB56902,board_name:BHB56902
2023-12-15 19:30:00 create thread get_nonce_and_register_thread
2023-12-15 19:30:00 fixed working voltage = 1340
2023-12-15 19:30:00 Chain [0] PCB Version: 0x0300
2023-12-15 19:30:00 Chain [0] BOM Version: 0x0000
2023-12-15 19:30:00 Chain [1] PCB Version: 0x0300
2023-12-15 19:30:00 Chain [1] BOM Version: 0x0000
2023-12-15 19:30:00 Chain [2] PCB Version: 0x0300
2023-12-15 19:30:00 Chain [2] BOM Version: 0x0000
2023-12-15 19:30:00 bad chain id = 3
2023-12-15 19:30:00 Fan check passed.
2023-12-15 19:30:00 init fan pid target=55
2023-12-15 19:30:00 max sensor num = 4
2023-12-15 19:30:00 STATUS_INITED: soc init done!
2023-12-15 19:30:00 temperature_monitor_thread start...
2023-12-15 19:30:04 start to init...
2023-12-15 19:30:04 i2c_sim_init start
2023-12-15 19:30:04 init gpio477
2023-12-15 19:30:04 init gpio476
2023-12-15 19:30:04 i2c_sim_init end
2023-12-15 19:30:05 power open power_version = 0x76
2023-12-15 19:30:09 power is Calibrated
2023-12-15 19:30:09 power sn:OLTT329BCJHJA3518
2023-12-15 19:30:09 enable_power_calibration,calibration date:211208.
2023-12-15 19:30:11 power type version: 0x0076
2023-12-15 19:30:13 disable power watchdog: 0x0000
2023-12-15 19:30:14 Initializing the power, please wait, this may take up to 2 minutes...
2023-12-15 19:31:34 Slept 80 seconds, diff = 1.
2023-12-15 19:31:44 set_voltage_by_steps to 1300.
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 set_voltage_by_steps to 1500.
2023-12-15 19:31:53 start up min temp by 75a = 18
2023-12-15 19:31:55 Chain[0]: find 77 asic, times 0
2023-12-15 19:31:57 Chain[1]: find 0 asic, times 0
2023-12-15 19:31:59 Chain[1]: find 0 asic, times 1
2023-12-15 19:32:00 Chain[1]: find 0 asic, times 2
2023-12-15 19:32:00 Chain 1 only find 0 asic, will power off hash board 1
2023-12-15 19:32:00 ERROR_SOC_INIT: soc init failed!
2023-12-15 19:32:00 stop_mining: soc init failed!
2023-12-15 19:32:00 uninit_temp_info
2023-12-15 19:32:00 do not read temp anymore...
2023-12-15 19:32:00 cancel thread
2023-12-15 19:32:00 ****power off hashboard****
2023-12-15 19:32:00 power off
2023-12-15 19:32:01 temp monitor thread exit
2023-12-15 19:32:16 Version num 65536
2023-12-15 19:32:16 Mask num 0x1fffe000
2023-12-15 19:32:16 Note: addrInterval or corenum is not initialized.

Изменено 20 дек 2023, 16:46 пользователем bvv79

Splinter · 26 дек 2023, 21:36

В 20.12.2023 в 20:45, bvv79 сказал:

Коллеги хэлп, S19k pro 120th, прошил оф новой merge прошивкой и кирпич. sd recovery не накатывается. Пулы видит, кульки на максимум, горит зеленым-красным, не майнит. Замена на контрольку с рабочего также не помогла. AMLogic, лог в спойлере.

Показать контент

[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Nov 15 15:23:45 CST 2023
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0]    07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0]    05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 211580K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 30084K reserved, 20480K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139034 ( 1018 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0]    Build-time adjustment of leaf fanout to 64.
[ 0.000000@0]    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016906@0] Console: colour dummy device 80x25
[ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031587@0] pid_max: default: 32768 minimum: 301
[ 0.036437@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[ 0.045773@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[ 0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[ 0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[ 0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[ 0.074904@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[ 0.081204@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[ 0.087504@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[ 0.093804@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[ 0.100104@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[ 0.106465@0] Security Framework initialized
[ 0.110697@0] SELinux: Initializing.
[ 0.114388@0] SELinux: Starting in permissive mode
[ 0.114424@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121108@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128840@0] ftrace: allocating 30061 entries in 118 pages
[ 0.186593@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.187401@0] CPU0: update cpu_capacity 1024
[ 0.191730@0] ASID allocator initialised with 32768 entries
[ 0.229867@0] secmon: can't fine clear_range
[ 0.230072@0] EFI services will not be available.
[ 0.233339@0] Meson chip version = RevC (25:C - 23:0)
[ 0.267018@1] Detected VIPT I-cache on CPU1
[ 0.267078@1] CPU1: update cpu_capacity 1024
[ 0.267080@1] CPU1: Booted secondary processor [410fd034]
[ 0.295070@2] Detected VIPT I-cache on CPU2
[ 0.295121@2] CPU2: update cpu_capacity 1024
[ 0.295124@2] CPU2: Booted secondary processor [410fd034]
[ 0.323137@3] Detected VIPT I-cache on CPU3
[ 0.323188@3] CPU3: update cpu_capacity 1024
[ 0.323191@3] CPU3: Booted secondary processor [410fd034]
[ 0.323278@0] Brought up 4 CPUs
[ 0.362495@0] SMP: Total of 4 processors activated.
[ 0.367404@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.373440@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.383996@0] CPU: All CPU(s) started at EL2
[ 0.385180@0] alternatives: patching kernel code
[ 0.390477@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.397704@0] devtmpfs: initialized
[ 0.412764@0] DMI not present or invalid.
[ 0.413152@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.421135@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427706@0] pinctrl core: initialized pinctrl subsystem
[ 0.434100@0] NET: Registered protocol family 16
[ 0.457653@0] cpuidle: using governor menu
[ 0.458161@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.463765@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.471163@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.477322@0] clkmsr: clkmsr: driver init
[ 0.481373@0] aml_watch_point_probe, in, wp:2
[ 0.486801@0] pstore: using zlib compression
[ 0.490202@0] console [pstore-1] enabled
[ 0.493641@0] pstore: Registered ramoops as persistent store backend
[ 0.500041@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.514395@0] aml_iomap: amlogic iomap probe done
[ 0.521213@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.523146@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.623613@0] usbcore: registered new interface driver usbfs
[ 0.623758@0] usbcore: registered new interface driver hub
[ 0.629418@0] usbcore: registered new device driver usb
[ 0.634693@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.639617@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.649006@0] PTP clock support registered
[ 0.653349@0] dmi: Firmware registration failed.
[ 0.658347@0] secmon: reserve_mem_size:0x300000
[ 0.662372@0] secmon secmon: assigned reserved memory node linux,secmon
[ 0.669261@0] secmon: get page:ffffffbf00140000, 5000
[ 0.673987@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.682373@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.690237@0] NetLabel: Initializing
[ 0.692425@0] NetLabel: domain hash size = 128
[ 0.697013@0] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.702241@0] NetLabel: unlabeled traffic allowed by default
[ 0.708878@0] clocksource: Switched to clocksource arch_sys_counter
[ 0.835638@0] VFS: Disk quotas dquot_6.6.0
[ 0.835785@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.862006@0] NET: Registered protocol family 2
[ 0.863057@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.868295@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.874916@0] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.881521@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.887464@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.894203@0] NET: Registered protocol family 1
[ 0.899160@0] RPC: Registered named UNIX socket transport module.
[ 0.904601@0] RPC: Registered udp transport module.
[ 0.909486@0] RPC: Registered tcp transport module.
[ 0.914376@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.923505@0] Unpacking initramfs...
[ 1.432052@3] Initramfs unpacking failed: junk in compressed archive
[ 1.438962@3] Freeing initrd memory: 6680K
[ 1.439902@3] hw perfevents: clusterb_enabled = 0
[ 1.442193@3] hw perfevents: cpumasks 0xf, 0x0
[ 1.446686@3] hw perfevents: cluster A irq = 7
[ 1.451246@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.461447@3] audit: initializing netlink subsys (disabled)
[ 1.464744@3] audit: type=2000 audit(1.276:1): initialized
[ 1.472052@3] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.496295@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.499206@2] NFS: Registering the id_resolver key type
[ 1.502099@2] Key type id_resolver registered
[ 1.506333@2] Key type id_legacy registered
[ 1.510980@2] fuse init (API version 7.26)
[ 1.516309@2] SELinux: Registering netfilter hooks
[ 1.522496@2] NET: Registered protocol family 38
[ 1.522557@2] Key type asymmetric registered
[ 1.525799@2] Asymmetric key parser 'x509' registered
[ 1.531280@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.538504@2] io scheduler noop registered (default)
[ 1.543542@2] io scheduler deadline registered
[ 1.548278@2] io scheduler cfq registered
[ 1.568816@0] random: fast init done
[ 1.568986@0] random: crng init done
[ 1.570359@2] Unable to detect cache hierarchy for CPU 0
[ 1.607706@2] loop: module loaded
[ 1.613235@2] zram: Added device: zram0
[ 1.613692@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.618648@2] libphy: Fixed MDIO Bus: probed
[ 1.623306@2] tun: Universal TUN/TAP device driver, 1.6
[ 1.627670@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.635878@2] ee eth reset:Addr = ffffff80081fd008
[ 1.643370@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.645335@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.650572@2] Ring mode enabled
[ 1.653799@2] DMA HW capability register supported
[ 1.658531@2] Normal descriptors
[ 1.661846@2] RX Checksum Offload Engine supported
[ 1.666755@2]    COE Type 2
[ 1.669371@2] TX Checksum insertion supported
[ 1.673837@2] Wake-Up On Lan supported
[ 1.677784@2] Enable RX Mitigation via HW Watchdog Timer
[ 1.691228@2] libphy: stmmac: probed
[ 1.691280@2] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[ 1.697733@2] PPP generic driver version 2.4.2
[ 1.700662@2] PPP BSD Compression module registered
[ 1.705214@2] PPP Deflate Compression module registered
[ 1.710461@2] PPP MPPE Compression module registered
[ 1.715426@2] NET: Registered protocol family 24
[ 1.720936@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.726813@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.733870@2] usbcore: registered new interface driver cdc_acm
[ 1.739069@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.747506@2] usbcore: registered new interface driver usbserial
[ 1.754158@2] mousedev: PS/2 mouse device common for all mice
[ 1.759598@2] usbcore: registered new interface driver xpad
[ 1.765041@2] i2c /dev entries driver
[ 1.769819@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.774027@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.784974@2] ff803000.serial: clock gate not found
[ 1.786538@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.793747@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.808686@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.811395@2] console [ttyS0] enabled
[ 1.818607@2] bootconsole [aml_uart0] disabled
[ 1.828274@1] ff804000.serial: clock gate not found
[ 1.832399@1] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.839518@1] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.849886@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 1.855991@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.866187@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 1.872472@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 1.883417@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 1.892734@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 1.899218@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 1.914246@0] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.918058@0] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.930387@0] aml_dma ff63e000.aml_dma: Aml dma
[ 1.933530@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 1.938546@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 1.944943@0] efusekeynum: 4
[ 1.947234@0] efusekeyname: mac   offset: 0   size: 6
[ 1.953676@0] efusekeyname: mac_bt   offset: 6   size: 6
[ 1.960086@0] efusekeyname: mac_wifi   offset: 12   size: 6
[ 1.966492@0] efusekeyname: usid   offset: 18   size: 16
[ 1.973329@3] efuse efuse: probe OK!
[ 1.978776@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 1.986041@3] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 1.991072@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 1.996299@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.041020@3] meson-mmc: meson_mmc_probe() : success!
[ 2.041273@3] amlogic mtd driver init
[ 2.045326@3] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.050083@3] bl mode descrete
[ 2.052966@3] fip_copies 4
[ 2.055630@3] fip_size 0x200000
[ 2.058770@3] nand_clk_ctrl 0xffe07000
[ 2.062493@3] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.068161@3] nand_clk_ctrl 0xffe07000
[ 2.071883@3] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.080620@3] plat->aml_nand_device ffffff800a005c10
[ 2.084812@3] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.090858@3] NAND device id: 98 da 90 15 76 16
[ 2.095089@3] NAND device: Manufacturer ID:
[ 2.099156@3] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.106719@3] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.112153@3] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.117702@3] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.123947@3] mtd->oobavail: 0x8
[ 2.127331@3] aml_nand_init 2119: plat-name:bootloader
[ 2.132266@3] Creating 1 MTD partitions on "bootloader":
[ 2.137555@3] 0x000000000000-0x000000200000 : "bootloader"
[ 2.146685@1] bootloader initialized ok
[ 2.146814@1] plat->aml_nand_device ffffff800a005c10
[ 2.151798@1] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.157930@1] NAND device id: 98 da 90 15 76 16
[ 2.162095@1] NAND device: Manufacturer ID:
[ 2.166167@1] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.173723@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.179155@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.184696@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.190949@1] mtd->oobavail: 0x8
[ 2.194418@1] aml_nand_init 2119: plat-name:nandnormal
[ 2.199302@1] bbt_start=20
[ 2.201943@1] env_start=24
[ 2.204607@1] key_start=32
[ 2.207312@1] dtb_start=40
[ 2.209997@1] ddr_start=44
[ 2.212671@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.219209@1] get_free_node 43: bitmap=0
[ 2.222656@1] get_free_node 55: bitmap=1
[ 2.226759@1] get_free_node 43: bitmap=1
[ 2.230454@1] get_free_node 55: bitmap=3
[ 2.234558@1] get_free_node 43: bitmap=3
[ 2.238254@1] get_free_node 55: bitmap=7
[ 2.242154@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.248824@1] nbbt free list:
[ 2.251772@1] blockN=21, ec=-1, dirty_flag=0
[ 2.256019@1] blockN=22, ec=-1, dirty_flag=0
[ 2.260265@1] blockN=23, ec=-1, dirty_flag=0
[ 2.264512@1] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.269948@1] nbbt valid addr: 280000
[ 2.273182@1] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.278814@1] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.285087@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.291528@1] get_free_node 43: bitmap=7
[ 2.295020@1] get_free_node 55: bitmap=f
[ 2.299125@1] get_free_node 43: bitmap=f
[ 2.302820@1] get_free_node 55: bitmap=1f
[ 2.307011@1] get_free_node 43: bitmap=1f
[ 2.310794@1] get_free_node 55: bitmap=3f
[ 2.314985@1] get_free_node 43: bitmap=3f
[ 2.318767@1] get_free_node 55: bitmap=7f
[ 2.322958@1] get_free_node 43: bitmap=7f
[ 2.326740@1] get_free_node 55: bitmap=ff
[ 2.330932@1] get_free_node 43: bitmap=ff
[ 2.334714@1] get_free_node 55: bitmap=1ff
[ 2.338991@1] get_free_node 43: bitmap=1ff
[ 2.342858@1] get_free_node 55: bitmap=3ff
[ 2.346934@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.353604@1] nenv free list:
[ 2.356535@1] blockN=25, ec=-1, dirty_flag=0
[ 2.360799@1] blockN=26, ec=-1, dirty_flag=0
[ 2.365045@1] blockN=27, ec=-1, dirty_flag=0
[ 2.369291@1] blockN=28, ec=-1, dirty_flag=0
[ 2.373538@1] blockN=29, ec=-1, dirty_flag=0
[ 2.377785@1] blockN=30, ec=-1, dirty_flag=0
[ 2.382031@1] blockN=31, ec=-1, dirty_flag=0
[ 2.386278@1] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.404349@1] nenv valid addr: 310000
[ 2.404382@1] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.408757@1] get_free_node 43: bitmap=3ff
[ 2.412627@1] get_free_node 55: bitmap=7ff
[ 2.416917@1] get_free_node 43: bitmap=7ff
[ 2.420755@1] get_free_node 55: bitmap=fff
[ 2.425079@1] get_free_node 43: bitmap=fff
[ 2.428921@1] get_free_node 55: bitmap=1fff
[ 2.433285@1] get_free_node 43: bitmap=1fff
[ 2.437240@1] get_free_node 55: bitmap=3fff
[ 2.441604@1] get_free_node 43: bitmap=3fff
[ 2.445560@1] get_free_node 55: bitmap=7fff
[ 2.449924@1] get_free_node 43: bitmap=7fff
[ 2.453880@1] get_free_node 55: bitmap=ffff
[ 2.458244@1] get_free_node 43: bitmap=ffff
[ 2.462200@1] get_free_node 55: bitmap=1ffff
[ 2.466651@1] get_free_node 43: bitmap=1ffff
[ 2.470693@1] get_free_node 55: bitmap=3ffff
[ 2.474938@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.481611@1] nkey free list:
[ 2.484541@1] blockN=32, ec=-1, dirty_flag=0
[ 2.488805@1] blockN=33, ec=-1, dirty_flag=0
[ 2.493051@1] blockN=34, ec=-1, dirty_flag=0
[ 2.497298@1] blockN=35, ec=-1, dirty_flag=0
[ 2.501544@1] blockN=36, ec=-1, dirty_flag=0
[ 2.505791@1] blockN=37, ec=-1, dirty_flag=0
[ 2.510038@1] blockN=38, ec=-1, dirty_flag=0
[ 2.514284@1] blockN=39, ec=-1, dirty_flag=0
[ 2.518531@1] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.523644@1] nkey valid addr: fffffffffffe0000
[ 2.528152@1] aml_nand_key_check 1251 NO key exist
[ 2.532920@1] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.539566@1] get_free_node 43: bitmap=3ffff
[ 2.543407@1] get_free_node 55: bitmap=7ffff
[ 2.547858@1] get_free_node 43: bitmap=7ffff
[ 2.551900@1] get_free_node 55: bitmap=fffff
[ 2.556352@1] get_free_node 43: bitmap=fffff
[ 2.560394@1] get_free_node 55: bitmap=1fffff
[ 2.564727@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[ 2.571397@1] ndtb free list:
[ 2.574345@1] blockN=41, ec=-1, dirty_flag=0
[ 2.578591@1] blockN=42, ec=-1, dirty_flag=0
[ 2.582838@1] blockN=43, ec=-1, dirty_flag=0
[ 2.587083@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.605156@1] ndtb valid addr: 500000
[ 2.605190@1] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.609652@1] get_free_node 43: bitmap=1fffff
[ 2.613780@1] get_free_node 55: bitmap=3fffff
[ 2.618318@1] get_free_node 43: bitmap=3fffff
[ 2.622446@1] get_free_node 55: bitmap=7fffff
[ 2.626780@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.633450@1] nddr free list:
[ 2.636381@1] blockN=44, ec=-1, dirty_flag=0
[ 2.640645@1] blockN=45, ec=-1, dirty_flag=0
[ 2.644892@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.650004@1] nddr valid addr: fffffffffffe0000
[ 2.654511@1] aml_nand_ddr_check 1281 NO ddr exist
[ 2.659282@1] tpl: off 8388608, size 8388608
[ 2.757277@1] NAND bbt detect factory Bad block at c000000
[ 2.757329@1] aml_nand_add_partition:394 factory bad addr=600
[ 2.763008@1] NAND bbt detect factory Bad block at c020000
[ 2.768508@1] aml_nand_add_partition:394 factory bad addr=601
[ 2.808038@1] Creating 6 MTD partitions on "nandnormal":
[ 2.808085@1] 0x000000800000-0x000001000000 : "tpl"
[ 2.819332@3] 0x000001000000-0x000001200000 : "misc"
[ 2.823081@0] 0x000001200000-0x000002200000 : "recovery"
[ 2.835173@0] 0x000002200000-0x000004200000 : "boot"
[ 2.854940@0] 0x000004200000-0x000004700000 : "config"
[ 2.860484@0] 0x000004700000-0x000010000000 : "nvdata"
[ 2.925032@0] NAND bbt detect factory Bad block at c000000
[ 2.925146@0] NAND bbt detect factory Bad block at c020000
[ 2.966456@0] nandnormal initialized ok
[ 2.966564@0] aml_ubootenv_init: register env chardev
[ 2.970148@0] aml_ubootenv_init: register env chardev OK
[ 2.975134@0] amlnf_dtb_init: register dtb cdev
[ 2.979854@0] amlnf_dtb_init: register dtd cdev OK
[ 2.984305@0] mtd_nand_probe 267 , err = 0
[ 2.989442@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 2.994857@0] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 3.002060@0] unifykey: storage in base: 0xffffffc005000000
[ 3.006490@0] unifykey: storage out base: 0xffffffc005040000
[ 3.012102@0] unifykey: storage block base: 0xffffffc005080000
[ 3.017896@0] unifykey: probe done!
[ 3.022077@0] unifykey: no efuse-version set, use default value: -1
[ 3.027619@0] unifykey: key unify config unifykey-num is 6
[ 3.033149@0] unifykey: key unify fact unifykey-num is 6
[ 3.038356@0] unifykey: unifykey_devno: f200000
[ 3.043345@1] unifykey: device unifykeys created ok
[ 3.047860@1] unifykey: aml_unifykeys_init done!
[ 3.052756@1] sysled: module init
[ 3.056221@1] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.061002@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.068364@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.077244@1] dmc_monitor_probe
[ 3.083453@1] defendkey defendkey: Reserved memory is not enough!
[ 3.083948@1] defendkey: probe of defendkey failed with error -22
[ 3.090368@1] GACT probability NOT on
[ 3.093689@1] Mirror/redirect action on
[ 3.097471@1] u32 classifier
[ 3.100298@1] Actions configured
[ 3.103885@1] Netfilter messages via NETLINK v0.30.
[ 3.109167@1] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.115342@1] ctnetlink v0.93: registering with nfnetlink.
[ 3.121242@1] xt_time: kernel timezone is -0000
[ 3.124936@1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.131593@1] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.136284@1] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.141753@1] Initializing XFRM netlink socket
[ 3.147262@1] NET: Registered protocol family 10
[ 3.153320@1] mip6: Mobile IPv6
[ 3.153824@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.159792@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.167806@1] NET: Registered protocol family 17
[ 3.170073@1] NET: Registered protocol family 15
[ 3.174672@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.187826@1] l2tp_core: L2TP core driver, V2.0
[ 3.192209@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.197137@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.202883@1] l2tp_netlink: L2TP netlink interface
[ 3.207673@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.213750@1] l2tp_debugfs: L2TP debugfs support
[ 3.218284@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.224979@1] NET: Registered protocol family 35
[ 3.229859@1] Key type dns_resolver registered
[ 3.234451@1] Registered swp emulation handler
[ 3.238315@1] Registered cp15_barrier emulation handler
[ 3.243505@1] Registered setend emulation handler
[ 3.248245@1] disable EAS feature
[ 3.252799@0] registered taskstats version 1
[ 3.269434@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.775882@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.775968@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.784253@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.792692@1] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.800150@3] hub 1-0:1.0: USB hub found
[ 3.802654@3] hub 1-0:1.0: 1 port detected
[ 3.807243@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.812266@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.820163@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.829777@1] hub 2-0:1.0: USB hub found
[ 3.832217@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.839554@1] usb usb2: Unsupported the hub
[ 3.844307@1] aml_vrtc rtc: setting system clock to 2023-12-15 19:29:35 UTC (1702668575)
[ 3.852374@1] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d1a3000)
[ 3.852453@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.860345@1] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.860358@1] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00b414800
[ 3.960785@2] dwc_otg: Core Release: 3.10a
[ 3.960837@2] dwc_otg: Setting default values for core params
[ 3.965027@2] dwc_otg: curmode: 0, host_only: 0
[ 3.969530@2] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 3.982039@2] dwc_otg: Using Buffer DMA mode
[ 3.982076@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.985982@2] dwc_otg: Working on port type = SLAVE
[ 3.990839@2] dwc_otg: Dedicated Tx FIFOs mode
[ 3.997881@0] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 4.004532@0] cpucore_cooling_register, max_cpu_core_num:4
[ 4.017188@0] gxbb_pm: enter meson_pm_probe!
[ 4.017246@0] no vddio3v3_en pin
[ 4.018897@0] pm-meson aml_pm: Can't get switch_clk81
[ 4.023988@0] gxbb_pm: meson_pm_probe done
[ 4.028984@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.035311@0] Freeing unused kernel memory: 3648K
[ 4.049620@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.301143@2] ubi0: attaching mtd5
[ 4.320741@2] ubi0: scanning is finished
[ 4.325960@1] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.326088@1] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.333154@1] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.340059@1] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.347167@1] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.353225@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.360601@1] ubi0: max/mean erase counter: 6/2, WL threshold: 4096, image sequence number: 710726911
[ 4.369778@1] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.379042@2] ubi0: background thread "ubi_bgt0d" started, PID 1076
[ 4.392132@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080
[ 4.431083@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.433500@0] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.443536@0] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.453776@0] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.460351@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 950B2183-F094-4EBA-BA99-625C9569A8EE, small LPT model
[ 4.484549@1] ubi2: attaching mtd6
[ 4.951411@1] NAND bbt detect factory Bad block at c000000
[ 4.951537@1] NAND bbt detect factory Bad block at c020000
[ 5.202921@1] ubi2: scanning is finished
[ 5.210566@0] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.210868@0] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.217926@0] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.224908@3] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.231988@3] ubi2: good PEBs: 1478, bad PEBs: 2, corrupted PEBs: 0
[ 5.238193@3] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.245548@3] ubi2: max/mean erase counter: 13/6, WL threshold: 4096, image sequence number: 1061846921
[ 5.254913@3] ubi2: available PEBs: 0, total reserved PEBs: 1478, PEBs reserved for bad PEB handling: 2
[ 5.264365@1] ubi2: background thread "ubi_bgt2d" started, PID 1088
[ 5.277330@2] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1092
[ 5.316160@0] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdada_log"
[ 5.318506@0] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.328525@0] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.339362@0] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.346120@0] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 04F8E51F-964B-479B-B7E9-A2C48855FEC7, small LPT model
[ 5.573813@3] eth0: device MAC address 02:e0:21:4b:4c:e7
[ 5.657986@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.659270@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.907874@3] uart_trans: loading out-of-tree module taints kernel.
[ 5.910260@3] register uart_trans chrdev success.
[ 5.913680@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 5.921260@3] tty port open success [/dev/ttyS3]!
[ 5.926083@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 5.934454@3] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 5.940493@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 5.948143@3] tty port open success [/dev/ttyS2]!
[ 5.952815@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 5.961186@3] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 5.967337@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 5.974993@3] tty port open success [/dev/ttyS1]!
[ 5.979661@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 5.988068@3] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 5.994363@0] create workqueue success!
[ 7.705152@0] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 7.708444@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.149450@0] uart trans dev open.
[ 28.149578@0] uart_buf virt addr = 0xffffffc00b140000
[ 28.152287@0] uart_buf phys addr = 0x0b140000
[ 28.156653@0] uart_buf pfn = 0x0000b140
[ 28.161050@0] uart trans stop send work timer.
[ 28.165689@0] uart trans set chain exist bits:0x7.
[ 28.170334@0] uart trans set work queue count 768.
[ 141.243187@1] uart set baud to: 4098
[ 141.243247@1] uart set baud to: 4098
[ 141.244708@1] uart set baud to: 4098
[ 148.800200@1] uart trans stop send work timer.
[ 164.196027@1] uart trans start send work timer.
[ 190.800222@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.

===========================================Miner log===========================================
2023-12-15 19:29:42 Miner compile time: Wed Nov 15 14:47:56 CST 2023 type: Antminer S19k Pro sn :JYZZAEUBCJHCA0B1H
2023-12-15 19:29:43 This is fix-freq version
2023-12-15 19:29:43 Miner compile time: Wed Nov 15 14:47:56 CST 2023 type: Antminer S19k Pro
2023-12-15 19:29:43 Miner sn: JYZZAEUBCJHCA0B1H
2023-12-15 19:29:43 commit version: 143b498a 2023-11-09 14:37:23, build by: jenkins 2023-11-15 15:11:08
2023-12-15 19:29:43 opt_multi_version = 1
2023-12-15 19:29:43 opt_bitmain_ab = 1
2023-12-15 19:29:43 mid_auto_gen = 1
2023-12-15 19:29:43 opt_bitmain_work_mode = 0
2023-12-15 19:29:43 port 439 already exported
2023-12-15 19:29:43 port 454 already exported
2023-12-15 19:29:43 port 440 already exported
2023-12-15 19:29:43 port 455 already exported
2023-12-15 19:29:43 port 441 already exported
2023-12-15 19:29:43 port 456 already exported
2023-12-15 19:29:44 port 438 already exported
2023-12-15 19:29:44 port 453 already exported
2023-12-15 19:29:44 port 446 already exported
2023-12-15 19:29:44 port 445 already exported
2023-12-15 19:29:44 Note: front fan is power on!
2023-12-15 19:29:44 Note: rear fan is power on!
2023-12-15 19:29:44 start the http log.
2023-12-15 19:29:44 httpListenThread start ret=0
2023-12-15 19:29:44 start listen on 6060 ...
2023-12-15 19:29:44 load machine BHB56902 conf
2023-12-15 19:29:44 machine : BHB56902
2023-12-15 19:29:44 get test_loop_securely_find_asic_num failed
2023-12-15 19:29:44 get high_temp_sub_freq failed,set default high_temp_sub_freq = 10
2023-12-15 19:29:44 abandon mix board!
2023-12-15 19:29:44 get mix boardname[0][BHB56902], name:BHB56902
2023-12-15 19:29:44 bad chain id = 3
2023-12-15 19:29:47 bad chain id = 3
2023-12-15 19:29:49 power off
2023-12-15 19:29:50 ==========================capability start==========================
2023-12-15 19:29:50 board num = 3
2023-12-15 19:29:50 board id = 0, chain num = 1
2023-12-15 19:29:50    chain id = 0
2023-12-15 19:29:50 board id = 1, chain num = 1
2023-12-15 19:29:50    chain id = 1
2023-12-15 19:29:50 board id = 2, chain num = 1
2023-12-15 19:29:50    chain id = 2
2023-12-15 19:29:50 ==========================capability end============================
2023-12-15 19:29:50 chain num = 3
2023-12-15 19:29:53 load chain 0 eeprom data
2023-12-15 19:29:56 load chain 1 eeprom data
2023-12-15 19:30:00 load chain 2 eeprom data
2023-12-15 19:30:00 eeprom load ret:0
2023-12-15 19:30:00 miner:BHB56901,board_name:BHB56902
2023-12-15 19:30:00 miner:BHB56902,board_name:BHB56902
2023-12-15 19:30:00 create thread get_nonce_and_register_thread
2023-12-15 19:30:00 fixed working voltage = 1340
2023-12-15 19:30:00 Chain [0] PCB Version: 0x0300
2023-12-15 19:30:00 Chain [0] BOM Version: 0x0000
2023-12-15 19:30:00 Chain [1] PCB Version: 0x0300
2023-12-15 19:30:00 Chain [1] BOM Version: 0x0000
2023-12-15 19:30:00 Chain [2] PCB Version: 0x0300
2023-12-15 19:30:00 Chain [2] BOM Version: 0x0000
2023-12-15 19:30:00 bad chain id = 3
2023-12-15 19:30:00 Fan check passed.
2023-12-15 19:30:00 init fan pid target=55
2023-12-15 19:30:00 max sensor num = 4
2023-12-15 19:30:00 STATUS_INITED: soc init done!
2023-12-15 19:30:00 temperature_monitor_thread start...
2023-12-15 19:30:04 start to init...
2023-12-15 19:30:04 i2c_sim_init start
2023-12-15 19:30:04 init gpio477
2023-12-15 19:30:04 init gpio476
2023-12-15 19:30:04 i2c_sim_init end
2023-12-15 19:30:05 power open power_version = 0x76
2023-12-15 19:30:09 power is Calibrated
2023-12-15 19:30:09 power sn:OLTT329BCJHJA3518
2023-12-15 19:30:09 enable_power_calibration,calibration date:211208.
2023-12-15 19:30:11 power type version: 0x0076
2023-12-15 19:30:13 disable power watchdog: 0x0000
2023-12-15 19:30:14 Initializing the power, please wait, this may take up to 2 minutes...
2023-12-15 19:31:34 Slept 80 seconds, diff = 1.
2023-12-15 19:31:44 set_voltage_by_steps to 1300.
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 bad chain id = 3
2023-12-15 19:31:46 set_voltage_by_steps to 1500.
2023-12-15 19:31:53 start up min temp by 75a = 18
2023-12-15 19:31:55 Chain[0]: find 77 asic, times 0
2023-12-15 19:31:57 Chain[1]: find 0 asic, times 0
2023-12-15 19:31:59 Chain[1]: find 0 asic, times 1
2023-12-15 19:32:00 Chain[1]: find 0 asic, times 2
2023-12-15 19:32:00 Chain 1 only find 0 asic, will power off hash board 1
2023-12-15 19:32:00 ERROR_SOC_INIT: soc init failed!
2023-12-15 19:32:00 stop_mining: soc init failed!
2023-12-15 19:32:00 uninit_temp_info
2023-12-15 19:32:00 do not read temp anymore...
2023-12-15 19:32:00 cancel thread
2023-12-15 19:32:00 ****power off hashboard****
2023-12-15 19:32:00 power off
2023-12-15 19:32:01 temp monitor thread exit
2023-12-15 19:32:16 Version num 65536
2023-12-15 19:32:16 Mask num 0x1fffe000
2023-12-15 19:32:16 Note: addrInterval or corenum is not initialized.

Кирпич - это когда без признаков жизни. А у вас с контролькой похоже все в порядке, но вот средняя хэшплата неисправна - не находятся на ней чипы.

Выбегалло · 10 янв 2024, 19:44

Вопрос - догадайтесь, что изображено на этом фото?

Helber · 10 янв 2024, 19:47

@Выбегалло , дальнобойное плазменное орудие

Kowex · 10 янв 2024, 19:48

3 минуты назад, Выбегалло сказал:

Вопрос - догадайтесь, что изображено на этом фото?

Гиперболоид инженера Гарика.

А на самом деле хрень полная.

Antminer S19,-pro, S19j,-pro, S19a, S19i, S19 Hyd, S19pro Hyd, S19pro+ Hyd, T19 Hyd

Рекомендуемые сообщения

Ссылка на комментарий

Поделиться на другие сайты

Топ авторов темы

Популярные дни

Топ авторов темы

Популярные дни

Популярные посты

Lexis77

feNDer2k5

scopus

Изображения в теме

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Ссылка на комментарий

Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Создать учетную запись

Войти

Последние посетители 0 пользователей онлайн

Similar Topics

Ресурсы

О Форуме

Соц.сети

Почта