Перейти к содержанию

Innosilicon T2T-25T, -29T, T2TH, T2TZ, 30-37 Th/s

Hlorofos

Автор Hlorofos
в ASIC/FPGA майнеры

 Поделиться
Hlorofos
Сообщение добавил Hlorofos

Все полезные ссылки и FAQ можно найти в первом сообщении. Прежде чем задать вопрос, посмотрите там.

Рекомендуемые сообщения

iln5317 Новичок

iln5317

Опубликовано
Опубликовано
3 часа назад, sansche сказал:

Фото старого и нового чипа в студию! 

Фото пришлю как прибуду на работу , но чипы визуально одинаковые ,и маркировка одинаковая ,новый чип сел на плату как родной ,все ножки на своих местах ,возможно что это китайский алиэкспресс и новые могут быть браком ,сегодня вечером закажу чипы бу с донора ,правда ценник там кусается , ещё подскажите пожалуйста,  датчик температуры где находится ,возможно он моросит,вот почему то именно первый чип умер ,хотя на первых чипах температура всегда в норме зелёной показывают ,могу предполагать что это и не чип вовсе мозги делает 

Ссылка на комментарий
Поделиться на другие сайты
  • Ответов 439
  • Создана
  • Последний ответ

Топ авторов темы

Популярные дни

Топ авторов темы

Популярные дни

Популярные посты

Комрад
Комрад

хочешь загубить аппарат-подключи к найсу. Найс-это не пул, а агрегатор мощностей.

lk29
lk29

Ищи в телеграмм N0TScrooge или cubich они умеют это лечить.

Onoprienko Bogdan
Onoprienko Bogdan

Понимаю что поздно, но все же. Тоже столкнулся с такой проблемой. Купил 4 т2т 25тх. Как полагается разобрал, почистил, три собрал обратно. Включаю первый, а там вечный тюнинг. Через /error 0 информаци

Изображения в теме

sansche Новичок

sansche

Опубликовано
Опубликовано
9 минут назад, iln5317 сказал:

Фото пришлю как прибуду на работу , но чипы визуально одинаковые ,и маркировка одинаковая ,новый чип сел на плату как родной ,все ножки на своих местах ,возможно что это китайский алиэкспресс и новые могут быть браком ,сегодня вечером закажу чипы бу с донора ,правда ценник там кусается , ещё подскажите пожалуйста,  датчик температуры где находится ,возможно он моросит,вот почему то именно первый чип умер ,хотя на первых чипах температура всегда в норме зелёной показывают ,могу предполагать что это и не чип вовсе мозги делает 

Всеж к чипу вопрос,  может серия какая особая.  Первый всегда у тешек и накрывается, я уж 5 таких плат видел, работают - и отвал платы, температура 1 гочипа на 392 гр. Чем лечить пока не знаю, давайте думать вместе. 

Ссылка на комментарий
Поделиться на другие сайты
iln5317 Новичок

iln5317

Опубликовано
Опубликовано
1 минуту назад, sansche сказал:

Всеж к чипу вопрос,  может серия какая особая.  Первый всегда у тешек и накрывается, я уж 5 таких плат видел, работают - и отвал платы, температура 1 гочипа на 392 гр. Чем лечить пока не знаю, давайте думать вместе. 

Дождусь я ещё бу чипа снятого с донора,а так может обвязку вокруг него глянуть ,может с ней траблы какие то бывают 

Ссылка на комментарий
Поделиться на другие сайты
sansche Новичок

sansche

Опубликовано
Опубликовано
2 минуты назад, iln5317 сказал:

Дождусь я ещё бу чипа снятого с донора,а так может обвязку вокруг него глянуть ,может с ней траблы какие то бывают 

Дата шит нету, я чёт думаю в силовой части проблема, до чипов.  Во всех платах 1й чип, типовая неисправность. 

Ссылка на комментарий
Поделиться на другие сайты
sansche Новичок

sansche

Опубликовано
Опубликовано

В теме про S17 очень сильно сейчас обсуждают перепайку чипов, особенно площадку термопроводную. Тоже думаю стоит обратить внимание на етот вопрос

 

Ссылка на комментарий
Поделиться на другие сайты
iln5317 Новичок

iln5317

Опубликовано
Опубликовано
1 минуту назад, sansche сказал:

На али есть гайд по ремонту т2т на китайском

Screenshot_20220104_005935_com.alibaba.aliexpresshd.jpg

Я предлагаю сложиться и купить на несколько человек если это устроит ,хотя бы посмотреть что там пишут и как 

Ссылка на комментарий
Поделиться на другие сайты
asics87 Новичок

asics87

Опубликовано
Опубликовано

доброго времени суток, подскажите , есть ли возможность , если да, то как подключить блок питания от одноэтажного  t2t к t2th(двухэтажному)

Ссылка на комментарий
Поделиться на другие сайты
sansche Новичок

sansche

Опубликовано
Опубликовано
27 минут назад, iln5317 сказал:

Я предлагаю сложиться и купить на несколько человек если это устроит ,хотя бы посмотреть что там пишут и как 

Что за софт и тестеры на т2т? Про что пишут

Ссылка на комментарий
Поделиться на другие сайты
iln5317 Новичок

iln5317

Опубликовано
Опубликовано
Только что, sansche сказал:

Что за софт и тестеры на т2т? Про что пишут

Тестер в районе 15 стоит по моему ,точно не помню 

Ссылка на комментарий
Поделиться на другие сайты
sansche Новичок

sansche

Опубликовано
Опубликовано
2 минуты назад, iln5317 сказал:

Тестер в районе 15 стоит по моему ,точно не помню 

Гайд по ремонту, надо у китайца поспрошать что ето.. 

Ссылка на комментарий
Поделиться на другие сайты
Chiyanov Новичок

Chiyanov

Опубликовано
Опубликовано (изменено)

Аппарат Innosilicon T2THF 33T
После перезагрузки отпала одна плата с ошибкой 28 ( ошибка связи )
шлейфы менял местами, плату менял местами, контакты чистил без изменений
Заметил один момент майнер на двух платах стабильнее стал работать) получается пплата глючила уже...
в целом аппарат можно сказать как новый.
Было может такое у вас, как решилось?

---------------------------

Вообщем помогло сброс настроек+ снижение мощности.

Изменено пользователем Chiyanov
Разобрался с вопросом
Ссылка на комментарий
Поделиться на другие сайты
hustle88 Новичок

hustle88

Опубликовано
Опубликовано

Ребят случилась беда. Будьте любезны помочь 

 

В ночь на 2х машинках Слетели пароли 

Не могу зайти в веб морду 

Стандартный пароль не подходит 

Машинки 25тх и 27тх

Кто знает как сбросить пароль? 

Или как прошить через сд карту по порядку? 

Всем добра 

Ссылка на комментарий
Поделиться на другие сайты
sansche Новичок

sansche

Опубликовано
Опубликовано
4 часа назад, hustle88 сказал:

Ребят случилась беда. Будьте любезны помочь 

 

В ночь на 2х машинках Слетели пароли 

Не могу зайти в веб морду 

Стандартный пароль не подходит 

Машинки 25тх и 27тх

Кто знает как сбросить пароль? 

Или как прошить через сд карту по порядку? 

Всем добра 

Попробуй в факю порой, там есть от старых прошивок несколько 

Ссылка на комментарий
Поделиться на другие сайты
Haze_228 Новичок

Haze_228

Опубликовано
Опубликовано

Здравствуйте, не подскажите стоит ли покупать т2т 37Т за 120 тысяч, какие проблемы у него есть если они есть, и актуален ли он на 05.01.2022?

Ссылка на комментарий
Поделиться на другие сайты
iln5317 Новичок

iln5317

Опубликовано
Опубликовано
  • Спойлер
    • Jan 05 17:55:56 InnoMiner cgminer[993]: board_detection_prepare:mcompat_lib compile time:Nov 29 2019 12:28:01
    • Jan 05 17:55:56 InnoMiner cgminer[993]: board_detection_prepare:no_board_test:1
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.769] Invalid config option --force_tune: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.795] Invalid config option --T1VID4: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.799] Invalid config option --T1VID5: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.801] Invalid config option --T1VID6: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.802] Invalid config option --T1VID7: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.808] Invalid config option --T1VID8: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.825] Invalid config option --Volt3_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.839] Invalid config option --Vid3_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt4_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid4_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt5_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid5_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt6_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid6_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.842] Invalid config option --Volt7_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.843] Invalid config option --Vid7_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt8_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Vid8_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt1_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt2_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.850] Invalid config option --Volt3_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.852] Invalid config option --Volt4_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Vid4_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Volt5_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Vid5_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.854] Invalid config option --Volt6_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.856] Invalid config option --Vid6_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.856] Invalid config option --Volt7_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.857] Invalid config option --Vid7_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.858] Invalid config option --Volt8_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.859] Invalid config option --Vid8_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.860] Invalid config option --Volt4_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.860] Invalid config option --Vid4_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt5_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Vid5_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt6_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Vid6_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt7_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.862] Invalid config option --Vid7_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.867] Invalid config option --Volt8_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.869] Invalid config option --Vid8_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.874] Invalid config option --Volt1_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.769] Invalid config option --force_tune: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.795] Invalid config option --T1VID4: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.799] Invalid config option --T1VID5: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.801] Invalid config option --T1VID6: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: Started cgminer 4.10.0
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.802] Invalid config option --T1VID7: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.808] Invalid config option --T1VID8: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.825] Invalid config option --Volt3_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.839] Invalid config option --Vid3_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt4_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid4_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt5_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid5_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt6_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid6_E: Value out of range
    • ange
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.843] Invalid config option --Vid7_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt8_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Vid8_E: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt1_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt2_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.850] Invalid config option --Volt3_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.852] Invalid config option --Volt4_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Vid4_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Volt5_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: Loaded configuration file /etc/cgminer.conf
    • cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Vid5_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.854] Invalid config option --Volt6_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.856] Invalid config option --Vid6_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.856] Invalid config option --Volt7_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.857] Invalid config option --Vid7_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.858] Invalid config option --Volt8_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.859] Invalid config option --Vid8_B: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.860] Invalid config option --Volt4_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.860] Invalid config option --Vid4_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt5_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Vid5_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt6_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Vid6_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt7_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.862] Invalid config option --Vid7_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.867] Invalid config option --Volt8_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.869] Invalid config option --Vid8_F: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.874] Invalid config option --Volt [1970-01-01 00:00:11.877] Invalid config option --Volt2_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.878] Invalid config option --Volt3_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.879] Invalid config option --Volt4_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.879] Invalid config option --Vid4_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: Error in configuration file, partially loaded.
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.879] Invalid config option --Volt5_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.879] Invalid config option --Vid5_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.880] Invalid config option --Volt6_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.880] Invalid config option --Vid6_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.881] Invalid config option --Volt7_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.884] Invalid config option --Vid7_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.885] Invalid config option --Volt8_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.886] Invalid config option --Vid8_P: Value out of range
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.893] poolinfo: url=stratum+tcp://ss.antpool.com:3333
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.902] poolinfo: user=ilnar4ik.002
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.904] poolinfo: url=stratum+tcp://ss.antpool.com:443
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.910] poolinfo: user=ilnar4ik.002
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.910] poolinfo: url=stratum+tcp://ss.antpool.com:25
    • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.917] poolinfo: user=ilnar4ik.002
    • Jan 05 17:55:56 InnoMiner cgminer[993]: check_hostsfile(0):
    • Jan 05 17:55:56 InnoMiner cgminer[993]: mcompat_lib compile time:Nov 29 2019 12:28:03
    • Jan 05 17:55:56 InnoMiner cgminer[993]: sys : platform[16] miner_type[0] chain_num[3] chip_num[140]
    • Jan 05 17:55:56 InnoMiner cgminer[993]: chain0: the plat is inserted
    • Jan 05 17:55:56 InnoMiner cgminer[993]: chain1: the plat is inserted
    • Jan 05 17:55:56 InnoMiner cgminer[993]: chain2: the plat is inserted
    • Jan 05 17:55:56 InnoMiner cgminer[993]: chain3: the plat is not inserted
    • Jan 05 17:55:56 InnoMiner cgminer[993]: chain4: the plat is not inserted
    • Jan 05 17:55:56 InnoMiner cgminer[993]: chain5: the plat is not inserted
    • Jan 05 17:55:56 InnoMiner cgminer[993]: chain6: the plat is not inserted
    • Jan 05 17:55:56 InnoMiner cgminer[993]: chain7: the plat is not inserted
    • Jan 05 17:55:56 InnoMiner cgminer[993]: total chains: 3
    • Jan 05 17:55:56 InnoMiner cgminer[993]: vid type detected: 7, is Vin sync? 1, vendor: hyt
    • Jan 05 17:55:56 InnoMiner cgminer[993]: all chains power down
    • Jan 05 17:55:58 InnoMiner cgminer[993]: spi_hub_register_test success
    • Jan 05 17:55:58 InnoMiner cgminer[993]: I2C fwver: 15.66
    • Jan 05 17:55:58 InnoMiner cgminer[993]: I2C vendor: GP
    • Jan 05 17:55:58 InnoMiner cgminer[993]: psu erorcode: 0
    • Jan 05 17:55:58 InnoMiner cgminer[993]: open psu_info file ok
    • Jan 05 17:55:58 InnoMiner cgminer[993]: psu info:GP
    • 15.66
    • 0
    • Jan 05 17:55:58 InnoMiner cgminer[993]: buf:soc t2tz.soc
    • , prefix:soc, type:t2tz, suffix:soc
    • Jan 05 17:55:58 InnoMiner cgminer[993]: psu_version:15.66, ver_prefix:15, ver_suffix:66
    • Jan 05 17:55:58 InnoMiner cgminer[993]: miner type is match psu version of GP!!!
    • Jan 05 17:55:58 InnoMiner cgminer[993]: sync time success
    • Jan 05 17:55:58 InnoMiner cgminer[993]: events:1 fw_version has changed !
    • Jan 05 17:55:58 InnoMiner cgminer[993]: thread_running_log create success !
    • Jan 05 17:55:58 InnoMiner cgminer[993]: vidmap init, size:32
    • Jan 05 17:55:58 InnoMiner cgminer[993]: Probing for an alive pool
    • Jan 05 17:55:59 InnoMiner cgminer[993]: Pool 1 difficulty changed to 32768
    • Jan 05 17:55:59 InnoMiner cgminer[993]: Pool 0 difficulty changed to 32768
    • Jan 05 17:55:59 InnoMiner cgminer[993]: Switching to pool 2 stratum+tcp://ss.antpool.com:25 - first alive pool
    • Jan 05 17:55:59 InnoMiner cgminer[993]: mcompat_record_params not register !
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->pll: 950
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->vol: 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->vid: 23
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->tuning: 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->bist_pll: 650
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->bist_vid: 11
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->pll: 942
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->vol: 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->vid: 19
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->tuning: 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->bist_pll: 650
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->bist_vid: 9
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->pll: 950
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->vol: 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->vid: 24
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->tuning: 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->bist_pll: 650
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->bist_vid: 13
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 17:56:00 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 17:56:00 InnoMiner cgminer[993]: fan ctrl BYPASS mode enabled
    • Jan 05 17:56:00 InnoMiner cgminer[993]: watchdog state file not found, load NORMAL state for all chains!
    • Jan 05 17:56:00 InnoMiner cgminer[993]: <Message Queue> client key: 1997210419
    • Jan 05 17:56:00 InnoMiner cgminer[993]: <Message Queue> msq id: 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: Pool 2 difficulty changed to 65536
    • Jan 05 17:56:00 InnoMiner cgminer[993]: <Message Queue> pid: 993
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain2: set spi speed 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain2: power down
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain1: set spi speed 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain1: power down
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain1 power down
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain0: set spi speed 0
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain0: power down
    • Jan 05 17:56:00 InnoMiner cgminer[993]: chain0 power down
    • Jan 05 17:56:00 InnoMiner cgminer[993]: Pool 0 stratum+tcp://ss.antpool.com:3333 alive, testing stability
    • Jan 05 17:56:00 InnoMiner cgminer[993]: Switching to pool 0 stratum+tcp://ss.antpool.com:3333
    • Jan 05 17:56:00 InnoMiner cgminer[993]: Network diff set to 24.3T
    • Jan 05 17:56:02 InnoMiner cgminer[993]: all chains: set vid 0
    • Jan 05 17:56:02 InnoMiner cgminer[993]: chain0: failed to set vid 0(16.40V), 0.02V
    • Jan 05 17:56:02 InnoMiner cgminer[993]: chain1: sleep(0)
    • Jan 05 17:56:02 InnoMiner cgminer[993]: chain0: sleep(0)
    • Jan 05 17:56:02 InnoMiner cgminer[993]: chain1: power-on mode 1
    • Jan 05 17:56:02 InnoMiner cgminer[993]: chain0: power-on mode 1
    • Jan 05 17:56:02 InnoMiner cgminer[993]: chain2: sleep(0)
    • Jan 05 17:56:02 InnoMiner cgminer[993]: chain2: power-on mode 1
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain0: startup voltage 1640 (expect 1640)
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: startup voltage 1640 (expect 1640)
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain2: startup voltage 1640 (expect 1640)
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain0: chip type detected: 05
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: chip type detected: 05
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain2: chip type detected: 05
    • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced all chip clk io success
    • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced all chip clk io success
    • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced all chip clk io success
    • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced chip1 spi io success
    • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced chip1 spi io success
    • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced chip1 spi io success
    • Jan 05 17:56:08 InnoMiner cgminer[993]: pll_pre_div:2 pll_fb_div: 80 pll_post_div:80
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1 index: 0 pll:30
    • Jan 05 17:56:08 InnoMiner cgminer[993]: miner subtype is T2TZ
    • Jan 05 17:56:08 InnoMiner cgminer[993]: pll total level: 369
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain2: set tsadc divider
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain0: set tsadc divider
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: set tsadc divider
    • Jan 05 17:56:08 InnoMiner cgminer[993]: s_vin_sync_flag1:1 g_vsync_total_chains:3 line:933
    • Jan 05 17:56:08 InnoMiner cgminer[993]: s_vin_sync_flag1:2 g_vsync_total_chains:3 line:933
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: detected 140 chips
    • Jan 05 17:56:08 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: chip0 set pll 0(30MHz) -> 135(300MHz)
    • Jan 05 17:56:09 InnoMiner cgminer[993]: chain2: detected 140 chips
    • Jan 05 17:56:09 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 17:56:09 InnoMiner cgminer[993]: chain2: chip0 set pll 0(30MHz) -> 135(300MHz)
    • Jan 05 17:56:09 InnoMiner cgminer[993]: chain0: detected 140 chips
    • Jan 05 17:56:09 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 17:56:09 InnoMiner cgminer[993]: chain0: chip0 set pll 0(30MHz) -> 135(300MHz)
    • Jan 05 17:56:14 InnoMiner cgminer[993]: chain1: set spi speed 2
    • Jan 05 17:56:14 InnoMiner cgminer[993]: chain1: chip0 set pll 135(300MHz) -> 185(450MHz)
    • Jan 05 17:56:15 InnoMiner cgminer[993]: chain0: set spi speed 2
    • Jan 05 17:56:15 InnoMiner cgminer[993]: chain2: set spi speed 2
    • Jan 05 17:56:15 InnoMiner cgminer[993]: chain0: chip0 set pll 135(300MHz) -> 185(450MHz)
    • Jan 05 17:56:15 InnoMiner cgminer[993]: chain2: chip0 set pll 135(300MHz) -> 185(450MHz)
    • Jan 05 17:56:16 InnoMiner cgminer[993]: chain1: Vmax=498, Vmin=449, Vavg=470.2
    • Jan 05 17:56:17 InnoMiner cgminer[993]: chain2: Vmax=480, Vmin=461, Vavg=470.9
    • Jan 05 17:56:17 InnoMiner cgminer[993]: chain0: Vmax=491, Vmin=446, Vavg=470.5
    • Jan 05 17:56:17 InnoMiner cgminer[993]: all chains: set vid 0 -> 10
    • Jan 05 17:56:17 InnoMiner cgminer[993]: chain0: set vid 1(16.10V), 16.40V
    • Jan 05 17:56:17 InnoMiner cgminer[993]: chain0: failed to set vid 2(15.80V), 16.17V
    • Jan 05 17:56:17 InnoMiner cgminer[993]: chain0: failed to set vid 3(15.50V), 16.17V
    • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 4(15.20V), 16.17V
    • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 5(14.90V), 16.17V
    • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 6(14.60V), 15.24V
    • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 7(14.30V), 15.24V
    • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 8(14.00V), 15.24V
    • Jan 05 17:56:19 InnoMiner cgminer[993]: chain0: failed to set vid 9(13.70V), 14.25V
    • iner cgminer[993]: chain0: failed to set vid 10(13.40V), 14.25V
    • Jan 05 17:56:22 InnoMiner cgminer[993]: chain1: Vmax=408, Vmin=369, Vavg=384.9
    • Jan 05 17:56:22 InnoMiner cgminer[993]: chain0: Vmax=403, Vmin=365, Vavg=385.5
    • Jan 05 17:56:22 InnoMiner cgminer[993]: chain2: Vmax=393, Vmin=376, Vavg=384.8
    • Jan 05 17:56:22 InnoMiner cgminer[993]: chain1: chip0 set pll 185(450MHz) -> 243(648MHz)
    • Jan 05 17:56:22 InnoMiner cgminer[993]: chain2: chip0 set pll 185(450MHz) -> 243(648MHz)
    • Jan 05 17:56:22 InnoMiner cgminer[993]: chain0: chip0 set pll 185(450MHz) -> 243(648MHz)
    • Jan 05 17:56:24 InnoMiner cgminer[993]: all chains: set vid 10 -> 13
    • Jan 05 17:56:24 InnoMiner cgminer[993]: chain0: set vid 11(13.17V), 13.37V
    • Jan 05 17:56:24 InnoMiner cgminer[993]: chain0: failed to set vid 12(13.10V), 13.37V
    • Jan 05 17:56:24 InnoMiner cgminer[993]: chain0: failed to set vid 13(13.03V), 13.37V
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain1: Vmax=392, Vmin=363, Vavg=373.6
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain0: Vmax=387, Vmin=359, Vavg=374.2
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain2: Vmax=381, Vmin=366, Vavg=373.2
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain2: Vmax=381, Vmin=366, Vavg=373.2
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain0: Vmax=387, Vmin=359, Vavg=374.2
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain1: Vmax=392, Vmin=363, Vavg=373.5
    • Jan 05 17:56:28 InnoMiner cgminer[993]: fan ctrl BYPASS mode disabled
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain2: tmp_avg:26.1 speed:100
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain0: tmp_avg:40.6 speed:100
    • Jan 05 17:56:28 InnoMiner cgminer[993]: chain1: tmp_avg:40.7 speed:100
    • Jan 05 17:56:32 InnoMiner cgminer[993]: chain2: tmp_avg:26.1 speed:10
    • Jan 05 17:56:32 InnoMiner cgminer[993]: chain1: tmp_avg:40.7 speed:10
    • Jan 05 17:56:32 InnoMiner cgminer[993]: chain0: tmp_avg:40.6 speed:10
    • Jan 05 17:56:37 InnoMiner cgminer[993]: chain2: tmp_avg:28.0 speed:10
    • Jan 05 17:56:37 InnoMiner cgminer[993]: chain0: tmp_avg:41.3 speed:10
    • Jan 05 17:56:37 InnoMiner cgminer[993]: chain1: tmp_avg:41.3 speed:10
    • Jan 05 17:56:41 InnoMiner cgminer[993]: chain2: tmp_avg:28.0 speed:10
    • Jan 05 17:56:41 InnoMiner cgminer[993]: chain0: tmp_avg:41.3 speed:10
    • Jan 05 17:56:41 InnoMiner cgminer[993]: chain1: tmp_avg:41.3 speed:10
    • Jan 05 17:56:45 InnoMiner cgminer[993]: chain2: tmp_avg:29.9 speed:10
    • Jan 05 17:56:45 InnoMiner cgminer[993]: chain1: tmp_avg:42.5 speed:10
    • Jan 05 17:56:45 InnoMiner cgminer[993]: chain0: tmp_avg:42.6 speed:10
    • Jan 05 17:56:49 InnoMiner cgminer[993]: chain2: tmp_avg:29.9 speed:10
    • Jan 05 17:56:49 InnoMiner cgminer[993]: chain1: tmp_avg:42.5 speed:10
    • Jan 05 17:56:49 InnoMiner cgminer[993]: chain0: tmp_avg:42.6 speed:10
    • Jan 05 17:56:53 InnoMiner cgminer[993]: chain1: tmp_avg:43.6 speed:10
    • Jan 05 17:56:53 InnoMiner cgminer[993]: chain2: tmp_avg:31.8 speed:10
    • Jan 05 17:56:53 InnoMiner cgminer[993]: chain0: tmp_avg:43.7 speed:10
    • Jan 05 17:56:57 InnoMiner cgminer[993]: chain1: tmp_avg:43.6 speed:10
    • Jan 05 17:56:57 InnoMiner cgminer[993]: chain2: tmp_avg:31.8 speed:10
    • Jan 05 17:56:57 InnoMiner cgminer[993]: chain0: tmp_avg:43.7 speed:10
    • Jan 05 17:57:00 InnoMiner cgminer[993]: chain1: tmp_avg:44.8 speed:10
    • Jan 05 17:57:00 InnoMiner cgminer[993]: chain0: tmp_avg:44.7 speed:10
    • Jan 05 17:57:00 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:04 InnoMiner cgminer[993]: chain1: tmp_avg:44.8 speed:10
    • Jan 05 17:57:04 InnoMiner cgminer[993]: chain0: tmp_avg:44.7 speed:10
    • Jan 05 17:57:04 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:09 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:09 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:09 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:09 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:09 InnoMiner cgminer[993]: chain1: tmp_avg:45.8 speed:10
    • Jan 05 17:57:09 InnoMiner cgminer[993]: chain0: tmp_avg:45.8 speed:10
    • Jan 05 17:57:13 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:13 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:13 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:13 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:13 InnoMiner cgminer[993]: chain1: tmp_avg:45.8 speed:10
    • Jan 05 17:57:13 InnoMiner cgminer[993]: chain0: tmp_avg:45.8 speed:10
    • Jan 05 17:57:17 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:17 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:17 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:17 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:17 InnoMiner cgminer[993]: chain1: tmp_avg:46.8 speed:10
    • Jan 05 17:57:17 InnoMiner cgminer[993]: chain0: tmp_avg:46.6 speed:10
    • Jan 05 17:57:21 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:21 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:21 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:21 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:21 InnoMiner cgminer[993]: chain1: tmp_avg:46.8 speed:10
    • Jan 05 17:57:21 InnoMiner cgminer[993]: chain0: tmp_avg:46.6 speed:10
    • Jan 05 17:57:25 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:25 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:25 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:25 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 17:57:25 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 17:57:25 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:57:25 InnoMiner cgminer[993]: chain1: tmp_avg:47.7 speed:10
    • Jan 05 17:57:25 InnoMiner cgminer[993]: chain0: tmp_avg:47.6 speed:10
    • Jan 05 17:57:26 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:29 InnoMiner cgminer[993]: chain1: tmp_avg:47.7 speed:10
    • Jan 05 17:57:29 InnoMiner cgminer[993]: chain0: tmp_avg:47.6 speed:10
    • Jan 05 17:57:30 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:30 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:30 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:30 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:33 InnoMiner cgminer[993]: chain1: tmp_avg:48.6 speed:10
    • Jan 05 17:57:33 InnoMiner cgminer[993]: chain0: tmp_avg:48.4 speed:10
    • Jan 05 17:57:33 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:33 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:33 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:33 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:37 InnoMiner cgminer[993]: chain1: tmp_avg:48.6 speed:10
    • Jan 05 17:57:37 InnoMiner cgminer[993]: chain0: tmp_avg:48.4 speed:10
    • Jan 05 17:57:37 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:37 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:37 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:37 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:41 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:41 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:41 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:41 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:41 InnoMiner cgminer[993]: chain0: tmp_avg:49.1 speed:10
    • Jan 05 17:57:41 InnoMiner cgminer[993]: chain1: tmp_avg:49.3 speed:10
    • Jan 05 17:57:45 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:45 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:45 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:45 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 17:57:45 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 17:57:45 InnoMiner cgminer[993]: chain0: tmp_avg:49.1 speed:10
    • Jan 05 17:57:45 InnoMiner cgminer[993]: chain1: tmp_avg:49.3 speed:10
    • Jan 05 17:57:45 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:57:46 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:50 InnoMiner cgminer[993]: chain1: tmp_avg:50.0 speed:10
    • Jan 05 17:57:50 InnoMiner cgminer[993]: chain0: tmp_avg:49.7 speed:10
    • Jan 05 17:57:50 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:50 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:50 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:50 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:54 InnoMiner cgminer[993]: chain1: tmp_avg:50.0 speed:10
    • Jan 05 17:57:54 InnoMiner cgminer[993]: chain0: tmp_avg:49.7 speed:10
    • Jan 05 17:57:55 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:55 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:55 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:55 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:59 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain1: enable BISTMASK
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain0: enable BISTMASK
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain1: BISTSTART
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain0: BISTSTART
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain1: BISTCOLLECT
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain0: BISTCOLLECT
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain1: BISTFIX
    • Jan 05 17:57:59 InnoMiner cgminer[993]: chain0: BISTFIX
    • Jan 05 17:58:03 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:03 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:03 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:03 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:06 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:06 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:06 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:06 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 17:58:06 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 17:58:06 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:58:07 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:11 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:11 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:11 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:11 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:11 InnoMiner cgminer[993]: Pool 0 difficulty changed to 8192
    • Jan 05 17:58:15 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:15 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:15 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:15 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:19 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:19 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:19 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:19 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:23 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:23 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:23 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:23 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:27 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:27 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:27 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:27 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 17:58:27 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 17:58:27 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:58:28 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:32 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:32 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:32 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:32 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:36 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:36 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:36 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:36 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:40 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:40 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:40 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:40 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:44 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:44 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:44 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:44 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:48 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:48 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:48 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:48 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 17:58:48 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 17:58:48 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:58:49 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:53 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:53 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:53 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:53 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:58:57 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:58:57 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:58:57 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:58:57 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:01 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:01 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:01 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:01 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:05 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:05 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:05 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:05 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:09 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:09 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:09 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:09 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 17:59:09 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 17:59:09 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:59:10 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:14 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:14 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:14 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:14 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:18 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:18 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:18 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:18 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:22 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:22 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:22 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:22 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:26 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:26 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:26 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:26 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:30 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:30 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:30 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:30 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 17:59:30 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 17:59:30 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:59:31 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:35 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:35 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:35 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:35 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:38 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:38 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:38 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:38 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:42 InnoMiner cgminer[993]: Pool 0 difficulty changed to 2048
    • Jan 05 17:59:42 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:42 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:42 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:42 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:47 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:47 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:47 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:47 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:51 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:51 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:51 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:51 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 17:59:51 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 17:59:51 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 17:59:52 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 17:59:56 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 17:59:56 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 17:59:56 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 17:59:56 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 18:00:00 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 18:00:00 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 18:00:00 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 18:00:00 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 18:00:04 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 18:00:04 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 18:00:04 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 18:00:04 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 18:00:04 InnoMiner cgminer[993]: chain1: Vmax=396, Vmin=361, Vavg=375.5
    • Jan 05 18:00:04 InnoMiner cgminer[993]: chain0: Vmax=393, Vmin=358, Vavg=377.0
    • Jan 05 18:00:04 InnoMiner cgminer[993]: mcompat_chain_set_pll_vid 1370 all chains: set vid 9 -> 19, g_chip_type:5
    • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: failed to set vid 10(13.40V), 13.04V
    • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: set vid 11(13.17V), 13.16V
    • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: set vid 12(13.10V), 13.16V
    • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: set vid 13(13.03V), 13.16V
    • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: set vid 14(12.95V), 13.07V
    • Jan 05 18:00:06 InnoMiner cgminer[993]: chain0: set vid 15(12.88V), 13.07V
    • Jan 05 18:00:06 InnoMiner cgminer[993]: chain0: failed to set vid 16(12.81V), 13.07V
    • Jan 05 18:00:06 InnoMiner cgminer[993]: chain0: set vid 17(12.73V), 12.84V
    • Jan 05 18:00:06 InnoMiner cgminer[993]: chain0: set vid 18(12.66V), 12.84V
    • Jan 05 18:00:07 InnoMiner cgminer[993]: chain0: failed to set vid 19(12.58V), 12.84V
    • Jan 05 18:00:07 InnoMiner cgminer[993]: chain0: chip0 set pll 243(648MHz) -> 293(948MHz)
    • Jan 05 18:00:07 InnoMiner cgminer[993]: chain1: chip0 set pll 243(648MHz) -> 292(942MHz)
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: set tsadc divider
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: set spi speed 3
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: set tsadc divider
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: set spi speed 3
    • Jan 05 18:00:08 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: Vmax=379, Vmin=351, Vavg=361.9
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: Vmax=383, Vmin=349, Vavg=363.8
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: Vmax=377, Vmin=351, Vavg=362.0
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: detect finished
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: Vmax=383, Vmin=349, Vavg=363.9
    • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: detect finished
    • Jan 05 18:00:11 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
    • Jan 05 18:00:11 InnoMiner cgminer[993]: chain2: failed to read chain temperature
    • Jan 05 18:00:11 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
    • Jan 05 18:00:11 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
    • Jan 05 18:00:11 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 18:00:11 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2: RESETBIST failed
    • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2: failed in mcompat_chain_init(), SHUTDOWN
    • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2: failed in mcompat_chain_set_pll_vid()
    • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2: detect failed
    • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2 power down
    • Jan 05 18:00:15 InnoMiner cgminer[993]: miner error code: 33!
    • Jan 05 18:00:15 InnoMiner cgminer[993]: fan ctrl BYPASS mode disabled
    • Jan 05 18:00:15 InnoMiner cgminer[993]: chain detect finished. 2 chains detected.
    • Jan 05 18:00:15 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 18:00:15 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 18:00:15 InnoMiner cgminer[993]: cgminer count file is not existed!
    • Jan 05 18:00:15 InnoMiner cgminer[993]: monitor_time:3600 adjust_time:300 adjust_cnt:9
    • Jan 05 18:00:16 InnoMiner cgminer[993]: chain0: detected 140 chips / 0 inactive cores
    • Jan 05 18:00:16 InnoMiner cgminer[993]: chain1: detected 140 chips / 0 inactive cores
    • Jan 05 18:00:16 InnoMiner cgminer[993]: set i2c timeout to 30s
    • Jan 05 18:00:16 InnoMiner cgminer[993]: apply PLL-VOLT tuning mode for sync output PSU
    • Jan 05 18:00:16 InnoMiner cgminer[993]: ntime feature is enable
    • Jan 05 18:00:16 InnoMiner cgminer[993]: set temperature target to 70
    • Jan 05 18:00:16 InnoMiner cgminer[993]: T1 detect finish
    • Jan 05 18:00:21 InnoMiner cgminer[993]: API running in UNRESTRICTED read access mode on port 4028 (6)
    • Jan 05 18:00:42 InnoMiner cgminer[993]: Pool 0 difficulty changed to 32768
    • Jan 05 18:01:10 InnoMiner cgminer[993]: Stratum from pool 0 detected new block at height 717328

    ————————————в общем вот лог ,может он разъяснит ситуацию ? Правда почему то в логе чейн2 ошибку выдаёт ,а на контрольной плате он подписан как CON3 
Ссылка на комментарий
Поделиться на другие сайты
iln5317 Новичок

iln5317

Опубликовано
Опубликовано

Вот

Только что, iln5317 сказал:

Вот

 

18 минут назад, iln5317 сказал:
  • Jan 05 17:55:56 InnoMiner cgminer[993]: board_detection_prepare:mcompat_lib compile time:Nov 29 2019 12:28:01
  • Jan 05 17:55:56 InnoMiner cgminer[993]: board_detection_prepare:no_board_test:1
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.769] Invalid config option --force_tune: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.795] Invalid config option --T1VID4: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.799] Invalid config option --T1VID5: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.801] Invalid config option --T1VID6: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.802] Invalid config option --T1VID7: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.808] Invalid config option --T1VID8: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.825] Invalid config option --Volt3_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.839] Invalid config option --Vid3_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt4_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid4_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt5_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid5_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt6_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid6_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.842] Invalid config option --Volt7_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.843] Invalid config option --Vid7_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt8_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Vid8_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt1_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt2_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.850] Invalid config option --Volt3_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.852] Invalid config option --Volt4_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Vid4_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Volt5_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Vid5_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.854] Invalid config option --Volt6_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.856] Invalid config option --Vid6_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.856] Invalid config option --Volt7_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.857] Invalid config option --Vid7_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.858] Invalid config option --Volt8_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.859] Invalid config option --Vid8_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.860] Invalid config option --Volt4_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.860] Invalid config option --Vid4_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt5_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Vid5_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt6_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Vid6_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt7_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.862] Invalid config option --Vid7_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.867] Invalid config option --Volt8_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.869] Invalid config option --Vid8_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.874] Invalid config option --Volt1_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.769] Invalid config option --force_tune: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.795] Invalid config option --T1VID4: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.799] Invalid config option --T1VID5: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.801] Invalid config option --T1VID6: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: Started cgminer 4.10.0
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.802] Invalid config option --T1VID7: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.808] Invalid config option --T1VID8: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.825] Invalid config option --Volt3_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.839] Invalid config option --Vid3_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt4_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid4_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt5_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid5_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Volt6_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.841] Invalid config option --Vid6_E: Value out of range
  • ange
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.843] Invalid config option --Vid7_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt8_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Vid8_E: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt1_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.847] Invalid config option --Volt2_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.850] Invalid config option --Volt3_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.852] Invalid config option --Volt4_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Vid4_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Volt5_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: Loaded configuration file /etc/cgminer.conf
  • cgminer[993]: [1970-01-01 00:00:11.853] Invalid config option --Vid5_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.854] Invalid config option --Volt6_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.856] Invalid config option --Vid6_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.856] Invalid config option --Volt7_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.857] Invalid config option --Vid7_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.858] Invalid config option --Volt8_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.859] Invalid config option --Vid8_B: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.860] Invalid config option --Volt4_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.860] Invalid config option --Vid4_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt5_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Vid5_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt6_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Vid6_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.861] Invalid config option --Volt7_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.862] Invalid config option --Vid7_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.867] Invalid config option --Volt8_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.869] Invalid config option --Vid8_F: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.874] Invalid config option --Volt [1970-01-01 00:00:11.877] Invalid config option --Volt2_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.878] Invalid config option --Volt3_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.879] Invalid config option --Volt4_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.879] Invalid config option --Vid4_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: Error in configuration file, partially loaded.
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.879] Invalid config option --Volt5_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.879] Invalid config option --Vid5_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.880] Invalid config option --Volt6_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.880] Invalid config option --Vid6_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.881] Invalid config option --Volt7_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.884] Invalid config option --Vid7_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.885] Invalid config option --Volt8_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.886] Invalid config option --Vid8_P: Value out of range
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.893] poolinfo: url=stratum+tcp://ss.antpool.com:3333
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.902] poolinfo: user=ilnar4ik.002
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.904] poolinfo: url=stratum+tcp://ss.antpool.com:443
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.910] poolinfo: user=ilnar4ik.002
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.910] poolinfo: url=stratum+tcp://ss.antpool.com:25
  • Jan 05 17:55:56 InnoMiner cgminer[993]: [1970-01-01 00:00:11.917] poolinfo: user=ilnar4ik.002
  • Jan 05 17:55:56 InnoMiner cgminer[993]: check_hostsfile(0):
  • Jan 05 17:55:56 InnoMiner cgminer[993]: mcompat_lib compile time:Nov 29 2019 12:28:03
  • Jan 05 17:55:56 InnoMiner cgminer[993]: sys : platform[16] miner_type[0] chain_num[3] chip_num[140]
  • Jan 05 17:55:56 InnoMiner cgminer[993]: chain0: the plat is inserted
  • Jan 05 17:55:56 InnoMiner cgminer[993]: chain1: the plat is inserted
  • Jan 05 17:55:56 InnoMiner cgminer[993]: chain2: the plat is inserted
  • Jan 05 17:55:56 InnoMiner cgminer[993]: chain3: the plat is not inserted
  • Jan 05 17:55:56 InnoMiner cgminer[993]: chain4: the plat is not inserted
  • Jan 05 17:55:56 InnoMiner cgminer[993]: chain5: the plat is not inserted
  • Jan 05 17:55:56 InnoMiner cgminer[993]: chain6: the plat is not inserted
  • Jan 05 17:55:56 InnoMiner cgminer[993]: chain7: the plat is not inserted
  • Jan 05 17:55:56 InnoMiner cgminer[993]: total chains: 3
  • Jan 05 17:55:56 InnoMiner cgminer[993]: vid type detected: 7, is Vin sync? 1, vendor: hyt
  • Jan 05 17:55:56 InnoMiner cgminer[993]: all chains power down
  • Jan 05 17:55:58 InnoMiner cgminer[993]: spi_hub_register_test success
  • Jan 05 17:55:58 InnoMiner cgminer[993]: I2C fwver: 15.66
  • Jan 05 17:55:58 InnoMiner cgminer[993]: I2C vendor: GP
  • Jan 05 17:55:58 InnoMiner cgminer[993]: psu erorcode: 0
  • Jan 05 17:55:58 InnoMiner cgminer[993]: open psu_info file ok
  • Jan 05 17:55:58 InnoMiner cgminer[993]: psu info:GP
  • 15.66
  • 0
  • Jan 05 17:55:58 InnoMiner cgminer[993]: buf:soc t2tz.soc
  • , prefix:soc, type:t2tz, suffix:soc
  • Jan 05 17:55:58 InnoMiner cgminer[993]: psu_version:15.66, ver_prefix:15, ver_suffix:66
  • Jan 05 17:55:58 InnoMiner cgminer[993]: miner type is match psu version of GP!!!
  • Jan 05 17:55:58 InnoMiner cgminer[993]: sync time success
  • Jan 05 17:55:58 InnoMiner cgminer[993]: events:1 fw_version has changed !
  • Jan 05 17:55:58 InnoMiner cgminer[993]: thread_running_log create success !
  • Jan 05 17:55:58 InnoMiner cgminer[993]: vidmap init, size:32
  • Jan 05 17:55:58 InnoMiner cgminer[993]: Probing for an alive pool
  • Jan 05 17:55:59 InnoMiner cgminer[993]: Pool 1 difficulty changed to 32768
  • Jan 05 17:55:59 InnoMiner cgminer[993]: Pool 0 difficulty changed to 32768
  • Jan 05 17:55:59 InnoMiner cgminer[993]: Switching to pool 2 stratum+tcp://ss.antpool.com:25 - first alive pool
  • Jan 05 17:55:59 InnoMiner cgminer[993]: mcompat_record_params not register !
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->pll: 950
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->vol: 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->vid: 23
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->tuning: 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->bist_pll: 650
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:0 param->bist_vid: 11
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->pll: 942
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->vol: 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->vid: 19
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->tuning: 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->bist_pll: 650
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:1 param->bist_vid: 9
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->pll: 950
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->vol: 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->vid: 24
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->tuning: 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->bist_pll: 650
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cid:2 param->bist_vid: 13
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 17:56:00 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 17:56:00 InnoMiner cgminer[993]: fan ctrl BYPASS mode enabled
  • Jan 05 17:56:00 InnoMiner cgminer[993]: watchdog state file not found, load NORMAL state for all chains!
  • Jan 05 17:56:00 InnoMiner cgminer[993]: <Message Queue> client key: 1997210419
  • Jan 05 17:56:00 InnoMiner cgminer[993]: <Message Queue> msq id: 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: Pool 2 difficulty changed to 65536
  • Jan 05 17:56:00 InnoMiner cgminer[993]: <Message Queue> pid: 993
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain2: set spi speed 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain2: power down
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain1: set spi speed 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain1: power down
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain1 power down
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain0: set spi speed 0
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain0: power down
  • Jan 05 17:56:00 InnoMiner cgminer[993]: chain0 power down
  • Jan 05 17:56:00 InnoMiner cgminer[993]: Pool 0 stratum+tcp://ss.antpool.com:3333 alive, testing stability
  • Jan 05 17:56:00 InnoMiner cgminer[993]: Switching to pool 0 stratum+tcp://ss.antpool.com:3333
  • Jan 05 17:56:00 InnoMiner cgminer[993]: Network diff set to 24.3T
  • Jan 05 17:56:02 InnoMiner cgminer[993]: all chains: set vid 0
  • Jan 05 17:56:02 InnoMiner cgminer[993]: chain0: failed to set vid 0(16.40V), 0.02V
  • Jan 05 17:56:02 InnoMiner cgminer[993]: chain1: sleep(0)
  • Jan 05 17:56:02 InnoMiner cgminer[993]: chain0: sleep(0)
  • Jan 05 17:56:02 InnoMiner cgminer[993]: chain1: power-on mode 1
  • Jan 05 17:56:02 InnoMiner cgminer[993]: chain0: power-on mode 1
  • Jan 05 17:56:02 InnoMiner cgminer[993]: chain2: sleep(0)
  • Jan 05 17:56:02 InnoMiner cgminer[993]: chain2: power-on mode 1
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain0: startup voltage 1640 (expect 1640)
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: startup voltage 1640 (expect 1640)
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain2: startup voltage 1640 (expect 1640)
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain0: chip type detected: 05
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: chip type detected: 05
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain2: chip type detected: 05
  • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced all chip clk io success
  • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced all chip clk io success
  • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced all chip clk io success
  • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced chip1 spi io success
  • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced chip1 spi io success
  • Jan 05 17:56:08 InnoMiner cgminer[993]: enhanced chip1 spi io success
  • Jan 05 17:56:08 InnoMiner cgminer[993]: pll_pre_div:2 pll_fb_div: 80 pll_post_div:80
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1 index: 0 pll:30
  • Jan 05 17:56:08 InnoMiner cgminer[993]: miner subtype is T2TZ
  • Jan 05 17:56:08 InnoMiner cgminer[993]: pll total level: 369
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain2: set tsadc divider
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain0: set tsadc divider
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: set tsadc divider
  • Jan 05 17:56:08 InnoMiner cgminer[993]: s_vin_sync_flag1:1 g_vsync_total_chains:3 line:933
  • Jan 05 17:56:08 InnoMiner cgminer[993]: s_vin_sync_flag1:2 g_vsync_total_chains:3 line:933
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: detected 140 chips
  • Jan 05 17:56:08 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 17:56:08 InnoMiner cgminer[993]: chain1: chip0 set pll 0(30MHz) -> 135(300MHz)
  • Jan 05 17:56:09 InnoMiner cgminer[993]: chain2: detected 140 chips
  • Jan 05 17:56:09 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 17:56:09 InnoMiner cgminer[993]: chain2: chip0 set pll 0(30MHz) -> 135(300MHz)
  • Jan 05 17:56:09 InnoMiner cgminer[993]: chain0: detected 140 chips
  • Jan 05 17:56:09 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 17:56:09 InnoMiner cgminer[993]: chain0: chip0 set pll 0(30MHz) -> 135(300MHz)
  • Jan 05 17:56:14 InnoMiner cgminer[993]: chain1: set spi speed 2
  • Jan 05 17:56:14 InnoMiner cgminer[993]: chain1: chip0 set pll 135(300MHz) -> 185(450MHz)
  • Jan 05 17:56:15 InnoMiner cgminer[993]: chain0: set spi speed 2
  • Jan 05 17:56:15 InnoMiner cgminer[993]: chain2: set spi speed 2
  • Jan 05 17:56:15 InnoMiner cgminer[993]: chain0: chip0 set pll 135(300MHz) -> 185(450MHz)
  • Jan 05 17:56:15 InnoMiner cgminer[993]: chain2: chip0 set pll 135(300MHz) -> 185(450MHz)
  • Jan 05 17:56:16 InnoMiner cgminer[993]: chain1: Vmax=498, Vmin=449, Vavg=470.2
  • Jan 05 17:56:17 InnoMiner cgminer[993]: chain2: Vmax=480, Vmin=461, Vavg=470.9
  • Jan 05 17:56:17 InnoMiner cgminer[993]: chain0: Vmax=491, Vmin=446, Vavg=470.5
  • Jan 05 17:56:17 InnoMiner cgminer[993]: all chains: set vid 0 -> 10
  • Jan 05 17:56:17 InnoMiner cgminer[993]: chain0: set vid 1(16.10V), 16.40V
  • Jan 05 17:56:17 InnoMiner cgminer[993]: chain0: failed to set vid 2(15.80V), 16.17V
  • Jan 05 17:56:17 InnoMiner cgminer[993]: chain0: failed to set vid 3(15.50V), 16.17V
  • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 4(15.20V), 16.17V
  • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 5(14.90V), 16.17V
  • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 6(14.60V), 15.24V
  • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 7(14.30V), 15.24V
  • Jan 05 17:56:18 InnoMiner cgminer[993]: chain0: failed to set vid 8(14.00V), 15.24V
  • Jan 05 17:56:19 InnoMiner cgminer[993]: chain0: failed to set vid 9(13.70V), 14.25V
  • iner cgminer[993]: chain0: failed to set vid 10(13.40V), 14.25V
  • Jan 05 17:56:22 InnoMiner cgminer[993]: chain1: Vmax=408, Vmin=369, Vavg=384.9
  • Jan 05 17:56:22 InnoMiner cgminer[993]: chain0: Vmax=403, Vmin=365, Vavg=385.5
  • Jan 05 17:56:22 InnoMiner cgminer[993]: chain2: Vmax=393, Vmin=376, Vavg=384.8
  • Jan 05 17:56:22 InnoMiner cgminer[993]: chain1: chip0 set pll 185(450MHz) -> 243(648MHz)
  • Jan 05 17:56:22 InnoMiner cgminer[993]: chain2: chip0 set pll 185(450MHz) -> 243(648MHz)
  • Jan 05 17:56:22 InnoMiner cgminer[993]: chain0: chip0 set pll 185(450MHz) -> 243(648MHz)
  • Jan 05 17:56:24 InnoMiner cgminer[993]: all chains: set vid 10 -> 13
  • Jan 05 17:56:24 InnoMiner cgminer[993]: chain0: set vid 11(13.17V), 13.37V
  • Jan 05 17:56:24 InnoMiner cgminer[993]: chain0: failed to set vid 12(13.10V), 13.37V
  • Jan 05 17:56:24 InnoMiner cgminer[993]: chain0: failed to set vid 13(13.03V), 13.37V
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain1: Vmax=392, Vmin=363, Vavg=373.6
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain0: Vmax=387, Vmin=359, Vavg=374.2
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain2: Vmax=381, Vmin=366, Vavg=373.2
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain2: Vmax=381, Vmin=366, Vavg=373.2
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain0: Vmax=387, Vmin=359, Vavg=374.2
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain1: Vmax=392, Vmin=363, Vavg=373.5
  • Jan 05 17:56:28 InnoMiner cgminer[993]: fan ctrl BYPASS mode disabled
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain2: tmp_avg:26.1 speed:100
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain0: tmp_avg:40.6 speed:100
  • Jan 05 17:56:28 InnoMiner cgminer[993]: chain1: tmp_avg:40.7 speed:100
  • Jan 05 17:56:32 InnoMiner cgminer[993]: chain2: tmp_avg:26.1 speed:10
  • Jan 05 17:56:32 InnoMiner cgminer[993]: chain1: tmp_avg:40.7 speed:10
  • Jan 05 17:56:32 InnoMiner cgminer[993]: chain0: tmp_avg:40.6 speed:10
  • Jan 05 17:56:37 InnoMiner cgminer[993]: chain2: tmp_avg:28.0 speed:10
  • Jan 05 17:56:37 InnoMiner cgminer[993]: chain0: tmp_avg:41.3 speed:10
  • Jan 05 17:56:37 InnoMiner cgminer[993]: chain1: tmp_avg:41.3 speed:10
  • Jan 05 17:56:41 InnoMiner cgminer[993]: chain2: tmp_avg:28.0 speed:10
  • Jan 05 17:56:41 InnoMiner cgminer[993]: chain0: tmp_avg:41.3 speed:10
  • Jan 05 17:56:41 InnoMiner cgminer[993]: chain1: tmp_avg:41.3 speed:10
  • Jan 05 17:56:45 InnoMiner cgminer[993]: chain2: tmp_avg:29.9 speed:10
  • Jan 05 17:56:45 InnoMiner cgminer[993]: chain1: tmp_avg:42.5 speed:10
  • Jan 05 17:56:45 InnoMiner cgminer[993]: chain0: tmp_avg:42.6 speed:10
  • Jan 05 17:56:49 InnoMiner cgminer[993]: chain2: tmp_avg:29.9 speed:10
  • Jan 05 17:56:49 InnoMiner cgminer[993]: chain1: tmp_avg:42.5 speed:10
  • Jan 05 17:56:49 InnoMiner cgminer[993]: chain0: tmp_avg:42.6 speed:10
  • Jan 05 17:56:53 InnoMiner cgminer[993]: chain1: tmp_avg:43.6 speed:10
  • Jan 05 17:56:53 InnoMiner cgminer[993]: chain2: tmp_avg:31.8 speed:10
  • Jan 05 17:56:53 InnoMiner cgminer[993]: chain0: tmp_avg:43.7 speed:10
  • Jan 05 17:56:57 InnoMiner cgminer[993]: chain1: tmp_avg:43.6 speed:10
  • Jan 05 17:56:57 InnoMiner cgminer[993]: chain2: tmp_avg:31.8 speed:10
  • Jan 05 17:56:57 InnoMiner cgminer[993]: chain0: tmp_avg:43.7 speed:10
  • Jan 05 17:57:00 InnoMiner cgminer[993]: chain1: tmp_avg:44.8 speed:10
  • Jan 05 17:57:00 InnoMiner cgminer[993]: chain0: tmp_avg:44.7 speed:10
  • Jan 05 17:57:00 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:04 InnoMiner cgminer[993]: chain1: tmp_avg:44.8 speed:10
  • Jan 05 17:57:04 InnoMiner cgminer[993]: chain0: tmp_avg:44.7 speed:10
  • Jan 05 17:57:04 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:09 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:09 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:09 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:09 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:09 InnoMiner cgminer[993]: chain1: tmp_avg:45.8 speed:10
  • Jan 05 17:57:09 InnoMiner cgminer[993]: chain0: tmp_avg:45.8 speed:10
  • Jan 05 17:57:13 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:13 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:13 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:13 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:13 InnoMiner cgminer[993]: chain1: tmp_avg:45.8 speed:10
  • Jan 05 17:57:13 InnoMiner cgminer[993]: chain0: tmp_avg:45.8 speed:10
  • Jan 05 17:57:17 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:17 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:17 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:17 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:17 InnoMiner cgminer[993]: chain1: tmp_avg:46.8 speed:10
  • Jan 05 17:57:17 InnoMiner cgminer[993]: chain0: tmp_avg:46.6 speed:10
  • Jan 05 17:57:21 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:21 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:21 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:21 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:21 InnoMiner cgminer[993]: chain1: tmp_avg:46.8 speed:10
  • Jan 05 17:57:21 InnoMiner cgminer[993]: chain0: tmp_avg:46.6 speed:10
  • Jan 05 17:57:25 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:25 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:25 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:25 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 17:57:25 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 17:57:25 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:57:25 InnoMiner cgminer[993]: chain1: tmp_avg:47.7 speed:10
  • Jan 05 17:57:25 InnoMiner cgminer[993]: chain0: tmp_avg:47.6 speed:10
  • Jan 05 17:57:26 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:29 InnoMiner cgminer[993]: chain1: tmp_avg:47.7 speed:10
  • Jan 05 17:57:29 InnoMiner cgminer[993]: chain0: tmp_avg:47.6 speed:10
  • Jan 05 17:57:30 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:30 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:30 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:30 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:33 InnoMiner cgminer[993]: chain1: tmp_avg:48.6 speed:10
  • Jan 05 17:57:33 InnoMiner cgminer[993]: chain0: tmp_avg:48.4 speed:10
  • Jan 05 17:57:33 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:33 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:33 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:33 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:37 InnoMiner cgminer[993]: chain1: tmp_avg:48.6 speed:10
  • Jan 05 17:57:37 InnoMiner cgminer[993]: chain0: tmp_avg:48.4 speed:10
  • Jan 05 17:57:37 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:37 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:37 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:37 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:41 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:41 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:41 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:41 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:41 InnoMiner cgminer[993]: chain0: tmp_avg:49.1 speed:10
  • Jan 05 17:57:41 InnoMiner cgminer[993]: chain1: tmp_avg:49.3 speed:10
  • Jan 05 17:57:45 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:45 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:45 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:45 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 17:57:45 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 17:57:45 InnoMiner cgminer[993]: chain0: tmp_avg:49.1 speed:10
  • Jan 05 17:57:45 InnoMiner cgminer[993]: chain1: tmp_avg:49.3 speed:10
  • Jan 05 17:57:45 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:57:46 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:50 InnoMiner cgminer[993]: chain1: tmp_avg:50.0 speed:10
  • Jan 05 17:57:50 InnoMiner cgminer[993]: chain0: tmp_avg:49.7 speed:10
  • Jan 05 17:57:50 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:50 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:50 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:50 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:54 InnoMiner cgminer[993]: chain1: tmp_avg:50.0 speed:10
  • Jan 05 17:57:54 InnoMiner cgminer[993]: chain0: tmp_avg:49.7 speed:10
  • Jan 05 17:57:55 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:55 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:55 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:55 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:59 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain1: enable BISTMASK
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain0: enable BISTMASK
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain1: BISTSTART
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain0: BISTSTART
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain1: BISTCOLLECT
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain0: BISTCOLLECT
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain1: BISTFIX
  • Jan 05 17:57:59 InnoMiner cgminer[993]: chain0: BISTFIX
  • Jan 05 17:58:03 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:03 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:03 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:03 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:06 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:06 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:06 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:06 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 17:58:06 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 17:58:06 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:58:07 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:11 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:11 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:11 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:11 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:11 InnoMiner cgminer[993]: Pool 0 difficulty changed to 8192
  • Jan 05 17:58:15 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:15 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:15 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:15 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:19 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:19 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:19 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:19 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:23 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:23 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:23 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:23 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:27 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:27 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:27 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:27 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 17:58:27 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 17:58:27 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:58:28 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:32 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:32 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:32 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:32 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:36 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:36 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:36 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:36 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:40 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:40 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:40 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:40 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:44 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:44 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:44 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:44 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:48 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:48 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:48 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:48 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 17:58:48 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 17:58:48 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:58:49 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:53 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:53 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:53 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:53 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:58:57 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:58:57 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:58:57 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:58:57 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:01 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:01 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:01 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:01 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:05 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:05 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:05 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:05 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:09 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:09 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:09 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:09 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 17:59:09 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 17:59:09 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:59:10 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:14 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:14 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:14 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:14 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:18 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:18 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:18 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:18 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:22 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:22 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:22 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:22 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:26 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:26 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:26 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:26 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:30 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:30 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:30 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:30 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 17:59:30 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 17:59:30 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:59:31 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:35 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:35 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:35 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:35 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:38 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:38 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:38 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:38 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:42 InnoMiner cgminer[993]: Pool 0 difficulty changed to 2048
  • Jan 05 17:59:42 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:42 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:42 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:42 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:47 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:47 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:47 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:47 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:51 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:51 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:51 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:51 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 17:59:51 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 17:59:51 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 17:59:52 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 17:59:56 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 17:59:56 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 17:59:56 InnoMiner cgminer[993]: chain2: error temperature ignored(0): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 17:59:56 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 18:00:00 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 18:00:00 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 18:00:00 InnoMiner cgminer[993]: chain2: error temperature ignored(1): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 18:00:00 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 18:00:04 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 18:00:04 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 18:00:04 InnoMiner cgminer[993]: chain2: error temperature ignored(2): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 18:00:04 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 18:00:04 InnoMiner cgminer[993]: chain1: Vmax=396, Vmin=361, Vavg=375.5
  • Jan 05 18:00:04 InnoMiner cgminer[993]: chain0: Vmax=393, Vmin=358, Vavg=377.0
  • Jan 05 18:00:04 InnoMiner cgminer[993]: mcompat_chain_set_pll_vid 1370 all chains: set vid 9 -> 19, g_chip_type:5
  • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: failed to set vid 10(13.40V), 13.04V
  • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: set vid 11(13.17V), 13.16V
  • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: set vid 12(13.10V), 13.16V
  • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: set vid 13(13.03V), 13.16V
  • Jan 05 18:00:05 InnoMiner cgminer[993]: chain0: set vid 14(12.95V), 13.07V
  • Jan 05 18:00:06 InnoMiner cgminer[993]: chain0: set vid 15(12.88V), 13.07V
  • Jan 05 18:00:06 InnoMiner cgminer[993]: chain0: failed to set vid 16(12.81V), 13.07V
  • Jan 05 18:00:06 InnoMiner cgminer[993]: chain0: set vid 17(12.73V), 12.84V
  • Jan 05 18:00:06 InnoMiner cgminer[993]: chain0: set vid 18(12.66V), 12.84V
  • Jan 05 18:00:07 InnoMiner cgminer[993]: chain0: failed to set vid 19(12.58V), 12.84V
  • Jan 05 18:00:07 InnoMiner cgminer[993]: chain0: chip0 set pll 243(648MHz) -> 293(948MHz)
  • Jan 05 18:00:07 InnoMiner cgminer[993]: chain1: chip0 set pll 243(648MHz) -> 292(942MHz)
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: set tsadc divider
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: set spi speed 3
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: set tsadc divider
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: set spi speed 3
  • Jan 05 18:00:08 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain2: error temperature ignored(3): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain2: tmp_avg:33.4 speed:10
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: Vmax=379, Vmin=351, Vavg=361.9
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: Vmax=383, Vmin=349, Vavg=363.8
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: Vmax=377, Vmin=351, Vavg=362.0
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain1: detect finished
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: Vmax=383, Vmin=349, Vavg=363.9
  • Jan 05 18:00:08 InnoMiner cgminer[993]: chain0: detect finished
  • Jan 05 18:00:11 InnoMiner cgminer[993]: failed to read temperature for chain2 chip1
  • Jan 05 18:00:11 InnoMiner cgminer[993]: chain2: failed to read chain temperature
  • Jan 05 18:00:11 InnoMiner cgminer[993]: chain2: error temperature ignored(4): Tmax=9999, Tmin=9999, Tavg=9999.0
  • Jan 05 18:00:11 InnoMiner cgminer[993]: chain2: failed to read temperature for 5 times, SHUTDOWN
  • Jan 05 18:00:11 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 18:00:11 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2: RESETBIST failed
  • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2: failed in mcompat_chain_init(), SHUTDOWN
  • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2: failed in mcompat_chain_set_pll_vid()
  • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2: detect failed
  • Jan 05 18:00:12 InnoMiner cgminer[993]: chain2 power down
  • Jan 05 18:00:15 InnoMiner cgminer[993]: miner error code: 33!
  • Jan 05 18:00:15 InnoMiner cgminer[993]: fan ctrl BYPASS mode disabled
  • Jan 05 18:00:15 InnoMiner cgminer[993]: chain detect finished. 2 chains detected.
  • Jan 05 18:00:15 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 18:00:15 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 18:00:15 InnoMiner cgminer[993]: cgminer count file is not existed!
  • Jan 05 18:00:15 InnoMiner cgminer[993]: monitor_time:3600 adjust_time:300 adjust_cnt:9
  • Jan 05 18:00:16 InnoMiner cgminer[993]: chain0: detected 140 chips / 0 inactive cores
  • Jan 05 18:00:16 InnoMiner cgminer[993]: chain1: detected 140 chips / 0 inactive cores
  • Jan 05 18:00:16 InnoMiner cgminer[993]: set i2c timeout to 30s
  • Jan 05 18:00:16 InnoMiner cgminer[993]: apply PLL-VOLT tuning mode for sync output PSU
  • Jan 05 18:00:16 InnoMiner cgminer[993]: ntime feature is enable
  • Jan 05 18:00:16 InnoMiner cgminer[993]: set temperature target to 70
  • Jan 05 18:00:16 InnoMiner cgminer[993]: T1 detect finish
  • Jan 05 18:00:21 InnoMiner cgminer[993]: API running in UNRESTRICTED read access mode on port 4028 (6)
  • Jan 05 18:00:42 InnoMiner cgminer[993]: Pool 0 difficulty changed to 32768
  • Jan 05 18:01:10 InnoMiner cgminer[993]: Stratum from pool 0 detected new block at height 717328
    ————————————в общем вот лог ,может он разъяснит ситуацию ? Правда почему то в логе чейн2 ошибку выдаёт ,а на контрольной плате он подписан как CON3 

Вот 

Лог ниже

Ссылка на комментарий
Поделиться на другие сайты
RamTS Новичок

RamTS

Опубликовано
Опубликовано
В 04.01.2022 в 16:51, hustle88 сказал:

Ребят случилась беда. Будьте любезны помочь 

 

В ночь на 2х машинках Слетели пароли 

Не могу зайти в веб морду 

Стандартный пароль не подходит 

Машинки 25тх и 27тх

Кто знает как сбросить пароль? 

Или как прошить через сд карту по порядку? 

Всем добра 

В мануале же написано. Возврат к заводским настройкам: зажать ip set на 5-15 сек. на включенной машинке. 

Ссылка на комментарий
Поделиться на другие сайты
sansche Новичок

sansche

Опубликовано
Опубликовано

Народ, у кого с перепайкой чипов все получилось? Есть мнение что серии чипов (не номер название чипа) под ревизии идут хеш плат. 41, 50, 51.

Ссылка на комментарий
Поделиться на другие сайты
iln5317 Новичок

iln5317

Опубликовано
Опубликовано

Tmp_avg последние строчки лога отличаются ,на двух платках один диапазон а как раз таки на другой незапучкающейся меньше показания ,сегодня ещё раз разобрал (провались новые прокладки ?) пропаял первые две линии питания ,собрал и запустилась плата ,решил выключить и включить ,но чуда не случилось ?

789022A0-F33B-4E0C-A269-BB16E8DC463A.png

Ссылка на комментарий
Поделиться на другие сайты
hustle88 Новичок

hustle88

Опубликовано
Опубликовано
19 часов назад, RamTS сказал:

В мануале же написано. Возврат к заводским настройкам: зажать ip set на 5-15 сек. на включенной машинке. 

Позже нашёл 

Ссылка на комментарий
Поделиться на другие сайты
sansche Новичок

sansche

Опубликовано
Опубликовано
11 часов назад, iln5317 сказал:

Tmp_avg последние строчки лога отличаются ,на двух платках один диапазон а как раз таки на другой незапучкающейся меньше показания ,сегодня ещё раз разобрал (провались новые прокладки ?) пропаял первые две линии питания ,собрал и запустилась плата ,решил выключить и включить ,но чуда не случилось ?

789022A0-F33B-4E0C-A269-BB16E8DC463A.png

То есть после про пайки всеж стартанула плата, хоть и ненадолго?  Все признаки отвала чипа.  Новые надо впаивать, однозначно. 

Ссылка на комментарий
Поделиться на другие сайты
scopus Продвинутый пользователь

scopus

Опубликовано
Опубликовано (изменено)
В 06.01.2022 в 07:25, RamTS сказал:

В мануале же написано. Возврат к заводским настройкам: зажать ip set на 5-15 сек. на включенной машинке. 

Да ни фига не помогает вот так и сразу. У нас в четырех местах именно силиконы в эту ночь хакнули. Знакомый после 100500 попыток все таки т2тz на 30ТН вернул к жизни,а вот т3+ и на 26тн ни как.

Не могу найти,как их прошить с флешки, то ли ни как, то ли молчат все в тряпочку, то ли прошло мимо.

11 часов назад, hustle88 сказал:

Позже нашёл 

 

У меня вообще был прикол в одной сети стояли Т3+ и Т2ТZ , Т3+ хакнули, эти Т2ТZ пронесло и работают...

Изменено пользователем scopus
Ссылка на комментарий
Поделиться на другие сайты
hustle88 Новичок

hustle88

Опубликовано
Опубликовано
7 часов назад, scopus сказал:

Да ни фига не помогает вот так и сразу. У нас в четырех местах именно силиконы в эту ночь хакнули. Знакомый после 100500 попыток все таки т2тz на 30ТН вернул к жизни,а вот т3+ и на 26тн ни как.

Не могу найти,как их прошить с флешки, то ли ни как, то ли молчат все в тряпочку, то ли прошло мимо.

 

У меня вообще был прикол в одной сети стояли Т3+ и Т2ТZ , Т3+ хакнули, эти Т2ТZ пронесло и работают...

Стоял рядом t2thf+ с другим паролем 

 

Всё чики бамбони 

Ссылка на комментарий
Поделиться на другие сайты
Дмитрий 3 Новичок

Дмитрий 3

Опубликовано
Опубликовано

Всем привет! Проблема такая: сдохла контролька от T2THF+, есть в наличии контролька от T2TH+. Внимание вопрос заменяемые ли эти 2 контрольки?

IMG_1022-1.jpg

Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
 Поделиться
Перейти к списку тем

  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу

  • Similar Topics

    • Innosilicon S11 SiaMaster

      Innosilicon S11   Алгоритм:    Blake 2b Хешрейт:    3.83 tH/s ±8% Энергопотребление:    1380W ±8% Подключение к сети:    Ethernet Рабочая температура:   0°C—85°C Размеры:    290мм(д) x 130мм(ш) x 155мм(в) Вес:    3.7 kg     www.innosilicon.com

      в ASIC/FPGA майнеры

    • Ремонт innosilicon a4+/a6

      Помогите с ремонтом. Долго пытаюсь понять в чем причина. На платах прыгают сигналы en и rst. Соответственно плата не определяется 

      в ASIC/FPGA майнеры

    • Innosilicon A10,- pro, 500 Mh/s, Ethereum

      Официальный сайт | Manual и прошивка (официальный сайт) | Прошивка (bits.media)   В теме действуют все Правила форума! Перед тем как задать вопрос, посмотрите НОВИЧКИ Bits.Media, все сюда,  F.A.Q по майнингу. Уважайте своё и чужое время. Для обсуждения и поиска программ/драйверов пользуйтесь разделом Файлы. Сообщения, не относящиеся к теме обсуждения (оффтоп), удаляются без предупреждения.   Технические характеристики:   Статьи на Bits.me

      в ASIC/FPGA майнеры

    • Innosilicon A11

      Доброго времени суток! Подскажите, где взять прошивку на А11 (слетела)?

      в Прошивки

    • Innosilicon A4+ LTC Master

      Официальный сайт | Manual | Прошивка (официальный сайт)   В теме действуют все Правила форума! Перед тем как задать вопрос, посмотрите НОВИЧКИ Bits.Media, все сюда,  F.A.Q по майнингу. Уважайте своё и чужое время. Для обсуждения и поиска программ/драйверов пользуйтесь разделом Файлы. Сообщения, не относящиеся к теме обсуждения (оффтоп), удаляются без предупреждения.   Обзор:   Технические характеристики:   Фото:   Обзо

      в ASIC/FPGA майнеры

Ресурсы

Крипто новости
Мониторинг обменников
Календарь мероприятий
Калькулятор майнинга
Блоги

О Форуме

Правила форума
Администрация
Поиск по форуму
Файлы
Замечания и предложения

Соц.сети

Twitter
Facebook
VKontakte
Telegram
YouTube

Почта

Администратор
Реклама на Bits.media
Редакция Bits.media
Мониторинг обменников
События и мероприятия
×
×
  • Создать...