[ALL/Россия/Москва] Ремонт асиков BITMAIN Antminer S17 S15 T15 S11 S9 S9i S9j T9 Ремонт хеш плат асиков от 599! Cервисный центр по ремонту Bitmain!

[Bitsouls]

Работаем с 9 до 21 часа ежедневно

[Bitsouls]

Акция на декабря 10 ый асик будет отремонтирован бесплатно!!!

[firestarter_lg]

Асик Т9+ с одной платой не хочет работать. Вот лог:

Скажите пожалуйста, можно ли починить?
 

Цитата

 

Detect 1GB control board of XILINX
Miner Type = T9+
Miner compile time: Wed May 29 20:36:31 CST 2019 type: Antminer T9+ (vnish 3.8.6)
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Checking fans!
1 fan ok
2 fan ok
set_reset_allhashboard = 0x0000ffff
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] will use voltage=930 [1] to open core
Chain[10] will use voltage=930 [1] to open core
Chain[11] will use voltage=930 [1] to open core
Fix freq=650 Chain[2] voltage_pic=24 value=830
Fix freq=650 Chain[10] voltage_pic=24 value=830
Fix freq=650 Chain[11] voltage_pic=24 value=830
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 2 time
Chain[2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 3 time
Chain[2] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s

Set CHIP PowerOff Temp=105C

Miner fix freq ...
max freq = 100
set baud=1
setStartTimePoint total_tv_start_sys=100 total_tv_end_sys=101
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
FAN PWM: 100
read_temp_func Done!
CRC error counter=54

 

 

[Bitsouls]

ТОлько в декабре скидки дор 30 процентов !!!!

[Bitsouls]

из 100 асиков 1 бесплатно