Перейти к публикации

Javdet116

Пользователи
  • Публикации

    53
  • Зарегистрирован

  • Посещение

Репутация

-3 Плохой

О Javdet116

  • Звание
    Пользователь

Посетители профиля

281 просмотр профиля
  1. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    get fan[2] speed=5880 get fan[2] speed=5880 get fan[2] speed=5880 get fan[2] speed=5880 get fan[2] speed=5880 get fan[2] speed=5880 Fatal Error: some Fan lost or Fan speed low! Все таки вентилятор
  2. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    понял, начну копать отсюда. Не подскажете параметры вентилятора что бы купить в магазине Спасибо за ответ
  3. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Подскажите пожалуйста, отключил шлейфы от плат, ребутнул, но ситуация все та же. Что делать? И кто виноват))) заранее спасибо
  4. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Прописал. Теперь ребут. Смотрим. Вам огромное спасибо А как это может повлиять на решение моей проблемы? Имею ввиду замену на статический адрес
  5. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Спасибо) Так правильно?
  6. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    тогда уж обьясните пожалуйста как настроить майнер на статический адрес
  7. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Ха ха, молодец, достойный ответ)))) Я же спросил просто для того что бы понять. Спасибо всем за ответы, вы помогли!
  8. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Спасибо за ваш совет Посмотрел на контрольной плате как подключаются вентиляторы вдува и выдува... на всех асиках по разному...попробую поменять местами штеккеры У меня все майнеры на DHCP зачем этот менять на static? Спасибо
  9. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Делал так вроде... Щас пойду еще раз попробую Спасибо
  10. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Так? [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Xilinx Zynq [ 0.000000] cma: CMA: reserved 128 MiB at 27800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 258048 [ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 496 pages used for memmap [ 0.000000] HighMem zone: 63488 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768 [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528 [ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB) [ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB) [ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB) [ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ps7-slcr mapped to f0004000 [ 0.000000] zynq_clock_init: clkc starts at f0004100 [ 0.000000] Zynq clock init [ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns [ 0.000302] ps7-ttc #0 at f0006000, irq=43 [ 0.000611] Console: colour dummy device 80x30 [ 0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328) [ 0.040206] pid_max: default: 32768 minimum: 301 [ 0.040425] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.040447] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.042572] CPU: Testing write buffer coherency: ok [ 0.042917] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.042976] Setting up static identity map for 0x4c4b00 - 0x4c4b58 [ 0.043202] L310 cache controller enabled [ 0.043221] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB [ 0.121032] CPU1: Booted secondary processor [ 0.210225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.210355] Brought up 2 CPUs [ 0.210375] SMP: Total of 2 processors activated. [ 0.210383] CPU: All CPU(s) started in SVC mode. [ 0.211035] devtmpfs: initialized [ 0.213440] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.214644] regulator-dummy: no parameters [ 0.222316] NET: Registered protocol family 16 [ 0.224558] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.226837] cpuidle: using governor ladder [ 0.226850] cpuidle: using governor menu [ 0.234283] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered [ 0.235803] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.235816] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.235931] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000 [ 0.257353] bio: create slab <bio-0> at 0 [ 0.258753] vgaarb: loaded [ 0.259451] SCSI subsystem initialized [ 0.260485] usbcore: registered new interface driver usbfs [ 0.260671] usbcore: registered new interface driver hub [ 0.260893] usbcore: registered new device driver usb [ 0.261443] media: Linux media interface: v0.10 [ 0.261604] Linux video capture interface: v2.00 [ 0.261846] pps_core: LinuxPPS API ver. 1 registered [ 0.261858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.261991] PTP clock support registered [ 0.262345] EDAC MC: Ver: 3.0.0 [ 0.263387] Advanced Linux Sound Architecture Driver Initialized. [ 0.266226] DMA-API: preallocated 4096 debug entries [ 0.266239] DMA-API: debugging enabled by kernel config [ 0.266315] Switched to clocksource arm_global_timer [ 0.287324] NET: Registered protocol family 2 [ 0.287983] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.288077] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.288236] TCP: Hash tables configured (established 8192 bind 8192) [ 0.288304] TCP: reno registered [ 0.288322] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.288375] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.288629] NET: Registered protocol family 1 [ 0.288976] RPC: Registered named UNIX socket transport module. [ 0.288989] RPC: Registered udp transport module. [ 0.288997] RPC: Registered tcp transport module. [ 0.289006] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.289018] PCI: CLS 0 bytes, default 64 [ 0.289460] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.291465] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.292866] bounce pool size: 64 pages [ 0.293754] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.293955] msgmni has been set to 1486 [ 0.294732] io scheduler noop registered [ 0.294745] io scheduler deadline registered [ 0.294786] io scheduler cfq registered (default) [ 0.306953] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208 [ 0.306973] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.428460] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps [ 1.000760] console [ttyPS0] enabled [ 1.005019] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000 [ 1.012653] [drm] Initialized drm 1.1.0 20060810 [ 1.029643] brd: module loaded [ 1.038987] loop: module loaded [ 1.048610] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.054359] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.062359] libphy: XEMACPS mii bus: probed [ 1.067045] ------------- phy_id = 0x3625e62 [ 1.071787] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54 [ 1.080607] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.087309] ehci-pci: EHCI PCI platform driver [ 1.094516] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing? [ 1.101333] usbcore: registered new interface driver usb-storage [ 1.108200] mousedev: PS/2 mouse device common for all mice [ 1.114279] i2c /dev entries driver [ 1.121221] zynq-edac f8006000.ps7-ddrc: ecc not enabled [ 1.126748] cpufreq_cpu0: failed to get cpu0 regulator: -19 [ 1.132621] Xilinx Zynq CpuIdle Driver started [ 1.137517] sdhci: Secure Digital Host Controller Interface driver [ 1.143615] sdhci: Copyright(c) Pierre Ossman [ 1.148021] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.154756] mmc0: no vqmmc regulator found [ 1.158791] mmc0: no vmmc regulator found [ 1.196333] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA [ 1.205015] usbcore: registered new interface driver usbhid [ 1.210532] usbhid: USB HID core driver [ 1.215232] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 1.221523] nand: Micron MT29F2G08ABAEAWP [ 1.225497] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 1.231441] Bad block table found at page 131008, version 0x01 [ 1.237657] Bad block table found at page 130944, version 0x01 [ 1.243706] 3 ofpart partitions found on MTD device pl353-nand [ 1.249473] Creating 3 MTD partitions on "pl353-nand": [ 1.254579] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel" [ 1.262664] 0x000002000000-0x00000b000000 : "angstram-rootfs" [ 1.269994] 0x00000b000000-0x000010000000 : "upgrade-rootfs" [ 1.278923] TCP: cubic registered [ 1.282161] NET: Registered protocol family 17 [ 1.286893] Registering SWP/SWPB emulation handler [ 1.292772] regulator-dummy: disabling [ 1.297128] UBI: attaching mtd1 to ubi0 [ 1.823390] UBI: scanning is finished [ 1.835020] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0 [ 1.842098] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.848860] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.855525] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.862403] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0 [ 1.868383] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 1.875491] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1134783803 [ 1.884533] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40 [ 1.893751] UBI: background thread "ubi_bgt0d" started, PID 1080 [ 1.893756] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.897702] ALSA device list: [ 1.897705] No soundcards found. [ 1.914125] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082 [ 1.943165] UBIFS: recovery needed [ 2.010729] UBIFS: recovery completed [ 2.014401] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 2.020381] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.029453] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 2.039339] UBIFS: reserved for root: 0 bytes (0 KiB) [ 2.044368] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model [ 2.055660] VFS: Mounted root (ubifs filesystem) on device 0:11. [ 2.063077] devtmpfs: mounted [ 2.066178] Freeing unused kernel memory: 204K (c06d2000 - c0705000) [ 2.906173] random: dd urandom read with 0 bits of entropy available [ 3.296355] [ 3.296355] bcm54xx_config_init [ 3.906368] [ 3.906368] bcm54xx_config_init [ 6.907191] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz [ 6.913280] xemacps e000b000.ps7-ethernet: link up (100/FULL) [ 20.004327] In axi fpga driver! [ 20.007432] request_mem_region OK! [ 20.010791] AXI fpga dev virtual address is 0xf01fe000 [ 20.015896] *base_vir_addr = 0x8c510 [ 20.031909] In fpga mem driver! [ 20.034975] request_mem_region OK! [ 20.038592] fpga mem virtual address is 0xf3000000 [ 20.826334] [ 20.826334] bcm54xx_config_init [ 21.456333] [ 21.456333] bcm54xx_config_init [ 24.457183] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz [ 24.463200] xemacps e000b000.ps7-ethernet: link up (100/FULL) This is XILINX board. Totalram: 1039794176 Detect 1GB control board of XILINX DETECT HW version=0008c510 miner ID : 80008c047025885c Miner Type = S9 AsicType = 1387 real AsicNum = 63 use critical mode to search freq... get PLUG ON=0x000000e0 Find hashboard on Chain[5] Find hashboard on Chain[6] Find hashboard on Chain[7] set_reset_allhashboard = 0x0000ffff Check chain[5] PIC fw version=0x03 Check chain[6] PIC fw version=0x03 Check chain[7] PIC fw version=0x03 chain[5]: [63:22] [63:5] [63:24] [63:33] [63:37] [63:88] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[5] has freq in PIC and will jump over... Chain[5] has core num in PIC Chain[5] ASIC[16] has core num=1 Chain[5] ASIC[23] has core num=1 Chain[5] ASIC[38] has core num=1 Chain[5] ASIC[41] has core num=1 Chain[5] ASIC[60] has core num=2 Check chain[5] PIC fw version=0x03 chain[6]: [63:22] [63:5] [63:24] [63:33] [63:37] [63:82] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[6] has freq in PIC and will jump over... Chain[6] has core num in PIC Chain[6] ASIC[23] has core num=3 Chain[6] ASIC[32] has core num=2 Chain[6] ASIC[60] has core num=3 Check chain[6] PIC fw version=0x03 chain[7]: [63:22] [63:5] [63:24] [63:24] [63:80] [63:70] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[7] has freq in PIC and will jump over... Chain[7] has core num in PIC Chain[7] ASIC[18] has core num=1 Chain[7] ASIC[21] has core num=1 Chain[7] ASIC[38] has core num=6 Chain[7] ASIC[39] has core num=2 Check chain[7] PIC fw version=0x03 get PIC voltage=6 on chain[5], value=940 get PIC voltage=108 on chain[6], value=880 get PIC voltage=108 on chain[7], value=880 set_reset_allhashboard = 0x00000000 chain[5] temp offset record: 62,-5,32,-5,0,0,0,0 chain[5] temp chip I2C addr=0x98 chain[6] temp offset record: 62,-5,32,-6,0,0,0,0 chain[6] temp chip I2C addr=0x98 chain[7] temp offset record: 62,-5,32,-7,0,0,0,0 chain[7] temp chip I2C addr=0x98 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 CRC error counter=0 set command mode to VIL --- check asic number After Get ASIC NUM CRC error counter=0 set_baud=0 The min freq=700 set real timeout 52, need sleep=379392 After TEST CRC error counter=0 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 search freq for 1 times, completed chain = 3, total chain num = 3 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 restart Miner chance num=2 waiting for receive_func to exit! waiting for pic heart to exit! bmminer not found= 1377 root 0:00 grep bmminer bmminer not found, restart bmminer ... This is user mode for mining Detect 1GB control board of XILINX Miner Type = S9 Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 set_reset_allhashboard = 0x0000ffff miner ID : 80008c047025885c set_reset_allhashboard = 0x0000ffff Checking fans!get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880 get fan[5] speed=5880
  11. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Спасибо уважаемый
  12. Javdet116

    Проблема с Asic S9 не горят индикаторы Normal и Fault

    Дружище привет та же проблема и у меня. Ты как решил свою. Спасибо.
  13. Javdet116

    Альтернативная прошивка Antminer S9

    Я это все уже вчера проделал, но до сих пор мониторю и только один Асик проработал более 1,5 часа без перезагрузки
  • Сейчас на странице   0 пользователей

    Нет пользователей, просматривающих эту страницу.

    YoBit.Net
×