Jump to content

minur

Новички
  • Content Count

    3
  • Joined

  • Last visited

Everything posted by minur

  1. Пробовал прошивать оригинальной прошивкой и прошивкой от Vnish. проблема остается
  2. Всем привет. есть проблема на т17 - при запуске появляется ошибка ERROR_FAN_LOST. Видит только два вентилятора из 4х. Пробовал вентиляторы менять местами все равно не видит первый и второй. 2021-11-24 14:08:02 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3 2021-11-24 14:08:03 driver-btm-api.c:252:check_bringup_temp: Bring up temperature is 20 2021-11-24 14:08:03 thread.c:900:create_check_miner_status_thread: create thread 2021-11-24 14:08:03 thread.c:890:create_set_miner_status_thread: create thread 2021-11-24 14:08:03 driver-btm-api.c:613:calculate_timeout: dev->timeout = 392 2021-11-24 14:08:03 thread.c:875:create_temperature_monitor_thread: create thread 2021-11-24 14:08:03 freq_tuning.c:159:freq_tuning_get_max_freq: Max freq of tuning is 760 2021-11-24 14:08:03 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 17.80 ... 2021-11-24 14:08:23 fan.c:103:check_fan_status: Error, fan lost, only find 2 (< 4) 2021-11-24 14:08:23 fan.c:106:check_fan_status: fan_id = 0, fan_speed = 0 2021-11-24 14:08:23 fan.c:106:check_fan_status: fan_id = 1, fan_speed = 0 2021-11-24 14:08:23 fan.c:106:check_fan_status: fan_id = 2, fan_speed = 5760 2021-11-24 14:08:23 fan.c:106:check_fan_status: fan_id = 3, fan_speed = 4680 2021-11-24 14:08:23 fan.c:106:check_fan_status: fan_id = 4, fan_speed = 0 2021-11-24 14:08:23 fan.c:106:check_fan_status: fan_id = 5, fan_speed = 0 2021-11-24 14:08:23 fan.c:106:check_fan_status: fan_id = 6, fan_speed = 0 2021-11-24 14:08:23 fan.c:106:check_fan_status: fan_id = 7, fan_speed = 0 2021-11-24 14:08:23 driver-btm-api.c:205:set_miner_status: ERROR_FAN_LOST 2021-11-24 14:08:23 driver-btm-api.c:146:stop_mining: stop mining: fan lost 2021-11-24 14:08:23 thread.c:946:cancel_check_miner_status_thread: cancel thread 2021-11-24 14:08:23 thread.c:930:cancel_read_nonce_reg_thread: cancel thread 2021-11-24 14:08:23 driver-btm-api.c:131:killall_hashboard: ****power off hashboard**** 2021-11-24 14:08:32 power_api.c:124:check_voltage_multi: retry time: 0 2021-11-24 14:08:34 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.903789 2021-11-24 14:08:34 power_api.c:97:get_average_voltage: aveage voltage is: 17.903789 2021-11-24 14:09:30 driver-btm-api.c:644:set_timeout: freq 720 final timeout=163 2021-11-24 14:09:30 power_api.c:146:set_higher_voltage: higher_voltage = 17.900000 2021-11-24 14:09:30 power_api.c:428:slowly_set_iic_power_to_higher_voltage: slowly setting to voltage: 17.90 ... 2021-11-24 14:09:52 power_api.c:124:check_voltage_multi: retry time: 0 2021-11-24 14:09:54 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.903789 2021-11-24 14:09:54 power_api.c:97:get_average_voltage: aveage voltage is: 17.903789 2021-11-24 14:09:54 frequency.c:654:get_current_min_freq: current min freq 720 2021-11-24 14:09:54 driver-btm-api.c:1693:check_clock_counter: freq 720 clock_counter_limit 92
  3. У меня такая же проблема. С рабочей машины поставил на не рабочую такая же ошибка появилась... Потом вернул эту контрольку на свое место ошибка вентиляторов осталась. теперь у меня 2 не рабочие Т17 не знаю что и делать .
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...