Jump to content

Daut111

Новички
  • Content Count

    13
  • Joined

  • Last visited

Community Reputation

0 Обычный

About Daut111

  • Rank
    Новичок

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Ребята кто подскажет ? Как сделать чтобы на кашелек бонус догикоина скидывала ? Аппарат л3+ а пул трастпул и кошелек тотолкоин? Лайткоин то сделал но доги не знаю как а они там лежат
  2. Ребята может кто знает прошивку для ремонта т9+ ??
  3. Здраствуйте. Такая проблема контрольная плата на т9+ горит одна зеленая лампочка , думал перепрошить через флешку но при прошивки как обычно загар лампочки и тухнут но после больше не горят.В чем может быть проблема>? Вирус сидит? И лампочки интернета так же не горят
  4. На 37 чипе нету сигнал rst поменял 37 и 38 чип раза 3-4 аж ножки тоже хорошо залудил но все равно 37 чипов показывает. Куда пропал rst ? Куда капать? И сигналы 0.8 и 1.8 присутствуют
  5. прошивка тоже не помогло. как понять какой именно чип не видит темпер? [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Xilinx Zynq [ 0.000000] cma: CMA: reserved 128 MiB at 16800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 126976 [ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768 [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984 [ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB) [ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB) [ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB) [ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ps7-slcr mapped to df802000 [ 0.000000] zynq_clock_init: clkc starts at df802100 [ 0.000000] Zynq clock init [ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns [ 0.000298] ps7-ttc #0 at df804000, irq=43 [ 0.000604] Console: colour dummy device 80x30 [ 0.000634] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096) [ 0.090247] pid_max: default: 32768 minimum: 301 [ 0.090459] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090479] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.092654] CPU: Testing write buffer coherency: ok [ 0.092974] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.093031] Setting up static identity map for 0x4c4af8 - 0x4c4b50 [ 0.093248] L310 cache controller enabled [ 0.093267] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB [ 0.170992] CPU1: Booted secondary processor [ 0.260224] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.260355] Brought up 2 CPUs [ 0.260375] SMP: Total of 2 processors activated. [ 0.260383] CPU: All CPU(s) started in SVC mode. [ 0.261046] devtmpfs: initialized [ 0.263441] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.264624] regulator-dummy: no parameters [ 0.272036] NET: Registered protocol family 16 [ 0.274230] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.276492] cpuidle: using governor ladder [ 0.276506] cpuidle: using governor menu [ 0.283821] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered [ 0.285327] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.285340] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.285453] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000 [ 0.307172] bio: create slab <bio-0> at 0 [ 0.308569] vgaarb: loaded [ 0.309253] SCSI subsystem initialized [ 0.310126] usbcore: registered new interface driver usbfs [ 0.310610] usbcore: registered new interface driver hub [ 0.310854] usbcore: registered new device driver usb [ 0.312179] media: Linux media interface: v0.10 [ 0.312338] Linux video capture interface: v2.00 [ 0.312576] pps_core: LinuxPPS API ver. 1 registered [ 0.312588] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.312711] PTP clock support registered [ 0.313063] EDAC MC: Ver: 3.0.0 [ 0.314097] Advanced Linux Sound Architecture Driver Initialized. [ 0.316811] DMA-API: preallocated 4096 debug entries [ 0.316824] DMA-API: debugging enabled by kernel config [ 0.316899] Switched to clocksource arm_global_timer [ 0.336394] NET: Registered protocol family 2 [ 0.337132] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.337190] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.337275] TCP: Hash tables configured (established 4096 bind 4096) [ 0.337323] TCP: reno registered [ 0.337340] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.337371] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.337601] NET: Registered protocol family 1 [ 0.337942] RPC: Registered named UNIX socket transport module. [ 0.337954] RPC: Registered udp transport module. [ 0.337963] RPC: Registered tcp transport module. [ 0.337971] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.337984] PCI: CLS 0 bytes, default 64 [ 0.338410] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.340401] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.342485] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.342682] msgmni has been set to 967 [ 0.343439] io scheduler noop registered [ 0.343452] io scheduler deadline registered [ 0.343496] io scheduler cfq registered (default) [ 0.354455] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208 [ 0.354474] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.479329] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps [ 1.047382] console [ttyPS0] enabled [ 1.051634] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000 [ 1.059272] [drm] Initialized drm 1.1.0 20060810 [ 1.076100] brd: module loaded [ 1.085415] loop: module loaded [ 1.094759] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.100583] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.108298] libphy: XEMACPS mii bus: probed [ 1.112667] ------------- phy_id = 0x3625e62 [ 1.117574] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54 [ 1.126157] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.132978] ehci-pci: EHCI PCI platform driver [ 1.140287] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing? [ 1.147094] usbcore: registered new interface driver usb-storage [ 1.153912] mousedev: PS/2 mouse device common for all mice [ 1.160027] i2c /dev entries driver [ 1.166883] zynq-edac f8006000.ps7-ddrc: ecc not enabled [ 1.172419] cpufreq_cpu0: failed to get cpu0 regulator: -19 [ 1.178333] Xilinx Zynq CpuIdle Driver started [ 1.183170] sdhci: Secure Digital Host Controller Interface driver [ 1.189294] sdhci: Copyright(c) Pierre Ossman [ 1.193606] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.200501] mmc0: no vqmmc regulator found [ 1.204512] mmc0: no vmmc regulator found [ 1.246922] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA [ 1.255611] usbcore: registered new interface driver usbhid [ 1.261136] usbhid: USB HID core driver [ 1.265812] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 1.272108] nand: Micron MT29F2G08ABAEAWP [ 1.276078] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 1.282027] Bad block table found at page 131008, version 0x01 [ 1.288279] Bad block table found at page 130944, version 0x01 [ 1.294340] 3 ofpart partitions found on MTD device pl353-nand [ 1.300110] Creating 3 MTD partitions on "pl353-nand": [ 1.305211] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel" [ 1.313263] 0x000002000000-0x00000b000000 : "angstram-rootfs" [ 1.320570] 0x00000b000000-0x000010000000 : "upgrade-rootfs" [ 1.329457] TCP: cubic registered [ 1.332689] NET: Registered protocol family 17 [ 1.337404] Registering SWP/SWPB emulation handler [ 1.343284] regulator-dummy: disabling [ 1.347666] UBI: attaching mtd1 to ubi0 [ 1.876478] UBI: scanning is finished [ 1.888159] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0 [ 1.895213] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.902009] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.908686] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.915524] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0 [ 1.921534] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 1.928644] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1217900845 [ 1.937675] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40 [ 1.946872] UBI: background thread "ubi_bgt0d" started, PID 1080 [ 1.946877] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.950804] ALSA device list: [ 1.950808] No soundcards found. [ 1.967237] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082 [ 2.030181] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 2.036111] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.045253] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 2.055211] UBIFS: reserved for root: 0 bytes (0 KiB) [ 2.060201] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 900FB442-B764-4B53-BAFD-C7F3DA3F926F, small LPT model [ 2.071499] VFS: Mounted root (ubifs filesystem) on device 0:11. [ 2.078228] devtmpfs: mounted [ 2.081335] Freeing unused kernel memory: 204K (c06d2000 - c0705000) [ 2.929300] random: dd urandom read with 0 bits of entropy available [ 3.296944] [ 3.296944] bcm54xx_config_init [ 3.906944] [ 3.906944] bcm54xx_config_init [ 7.907773] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz [ 7.913862] xemacps e000b000.ps7-ethernet: link up (100/FULL) [ 24.355387] In axi fpga driver! [ 24.358505] request_mem_region OK! [ 24.361862] AXI fpga dev virtual address is 0xdf9fc000 [ 24.367036] *base_vir_addr = 0xc51a [ 24.391223] In fpga mem driver! [ 24.394300] request_mem_region OK! [ 24.400149] fpga mem virtual address is 0xe2000000 [ 25.196922] [ 25.196922] bcm54xx_config_init [ 25.826948] [ 25.826948] bcm54xx_config_init [ 29.827780] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz [ 29.833800] xemacps e000b000.ps7-ethernet: link up (100/FULL) Detect 512MB control board of XILINX Miner Type = S9 Miner compile time: Tue Aug 27 19:22:53 CST 2019 type: Antminer S9 (vnish 3.8.6) set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x0000ffff Checking fans! 1 fan ok 2 fan ok set_reset_allhashboard = 0x0000ffff Check chain[5] PIC fw version=0x03 Check chain[7] PIC fw version=0x03 Set voltage=176 on chain=5 Fix freq=650 Chain[5] voltage_pic=28 value=176 Set voltage= 176 on chain=7 Fix freq=650 Chain[7] voltage_pic=28 value=176 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 Chain[5] has 63 asic Chain[7] has 63 asic Set freq=600 on chain=5 Chain[5] has no freq in PIC, set default freq=600M Chain[5] has no core num in PIC Set freq=600 on chain=7 Chain[7] has no freq in PIC, set default freq=600M Chain[7] has no core num in PIC Set CHIP PowerOff Temp=105C Miner fix freq ... read PIC voltage=940 on chain[5] Chain:5 chipnum=63 Asic[ 0]:600 Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600 Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600 Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600 Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600 Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600 Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600 Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600 Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 Chain:5 max freq=600 Chain:5 min freq=600 read PIC voltage=940 on chain[7] Chain:7 chipnum=63 Asic[ 0]:600 Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600 Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600 Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600 Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600 Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600 Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600 Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600 Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 Chain:7 max freq=600 Chain:7 min freq=600 max freq = 600 set baud=1 Chain[5] set working voltage=920 [28] Chain[7] set working voltage=920 [28] setStartTimePoint total_tv_start_sys=125 total_tv_end_sys=126 restartNum = 2 , auto-reinit enabled... do read_temp_func once... do check_asic_reg 0x08 get RT hashrate from Chain[5]: (asic index start from 1-63) Asic[01]=80.5640 Asic[02]=68.0310 Asic[03]=71.4700 Asic[04]=70.1450 Asic[05]=68.5010 Asic[06]=73.7520 Asic[07]=63.7030 Asic[08]=65.0450 Asic[09]=68.2660 Asic[10]=71.9910 Asic[11]=67.7460 Asic[12]=61.1360 Asic[13]=70.1110 Asic[14]=69.4240 Asic[15]=68.6520 Asic[16]=66.0850 Asic[17]=64.7930 Asic[18]=73.6010 Asic[19]=73.7350 Asic[20]=68.1650 Asic[21]=71.7720 Asic[22]=69.0040 Asic[23]=70.5310 Asic[24]=67.6120 Asic[25]=70.5640 Asic[26]=65.8500 Asic[27]=72.0410 Asic[28]=69.2890 Asic[29]=65.8670 Asic[30]=69.1890 Asic[31]=67.2590 Asic[32]=71.8400 Asic[33]=67.5280 Asic[34]=69.5750 Asic[35]=70.5140 Asic[36]=71.8060 Asic[37]=70.0110 Asic[38]=66.1690 Asic[39]=66.5550 Asic[40]=67.7460 Asic[41]=66.8230 Asic[42]=65.9340 Asic[43]=68.0980 Asic[44]=63.8870 Asic[45]=66.4540 Asic[46]=65.9170 Asic[47]=59.8770 Asic[48]=72.3260 Asic[49]=71.1850 Asic[50]=66.0350 Asic[51]=66.2360 Asic[52]=69.7260 Asic[53]=68.9370 Asic[54]=70.6990 Asic[55]=72.1080 Asic[56]=69.4740 Asic[57]=67.5950 Asic[58]=66.1860 Asic[59]=60.2130 Asic[60]=70.0610 Asic[61]=69.3060 Asic[62]=69.9940 Asic[63]=73.9370 get RT hashrate from Chain[7]: (asic index start from 1-63) Asic[01]=67.7460 Asic[02]=65.9510 Asic[03]=66.8400 Asic[04]=70.6820 Asic[05]=66.5380 Asic[06]=66.5710 Asic[07]=64.6760 Asic[08]=72.6450 Asic[09]=68.7690 Asic[10]=63.9370 Asic[11]=67.0240 Asic[12]=66.4540 Asic[13]=75.4130 Asic[14]=69.1380 Asic[15]=64.0210 Asic[16]=69.6080 Asic[17]=66.9410 Asic[18]=60.2460 Asic[19]=67.1250 Asic[20]=70.9670 Asic[21]=73.4170 Asic[22]=66.6720 Asic[23]=69.9440 Asic[24]=69.8770 Asic[25]=61.3540 Asic[26]=64.9110 Asic[27]=62.5450 Asic[28]=72.1750 Asic[29]=67.1750 Asic[30]=70.1790 Asic[31]=69.3900 Asic[32]=67.9300 Asic[33]=75.7990 Asic[34]=70.2460 Asic[35]=70.1950 Asic[36]=66.0180 Asic[37]=69.2220 Asic[38]=66.5210 Asic[39]=69.0710 Asic[40]=64.0550 Asic[41]=70.2460 Asic[42]=67.9300 Asic[43]=71.0510 Asic[44]=69.6420 Asic[45]=64.5920 Asic[46]=69.1220 Asic[47]=65.8170 Asic[48]=67.1920 Asic[49]=73.8360 Asic[50]=67.2590 Asic[51]=67.1920 Asic[52]=74.1040 Asic[53]=69.5750 Asic[54]=70.5140 Asic[55]=68.5180 Asic[56]=73.1150 Asic[57]=65.7830 Asic[58]=68.2160 Asic[59]=66.2020 Asic[60]=63.2660 Asic[61]=72.0580 Asic[62]=67.3600 Asic[63]=68.2660 Check Chain[5] ASIC RT error: (asic index start from 1-63) Check Chain[7] ASIC RT error: (asic index start from 1-63) Done check_asic_reg do read temp on Chain[5] Chain[5] Chip[62] TempTypeID=55 middle offset=27 Chain[5] Chip[62] local Temp=0 Chain[5] Chip[62] middle Temp=0 Done read temp on Chain[5] do read temp on Chain[7] Chain[7] Chip[62] TempTypeID=55 middle offset=27 Chain[7] Chip[62] local Temp=0 Chain[7] Chip[62] middle Temp=0 Done read temp on Chain[7] set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0 FAN PWM: 100 read_temp_func Done! CRC error counter=0
  6. При запуски хеш плата две красные лампочки горят, это нормально???
  7. @vovchik этот оставти))) тот через комп захожу
  8. на этой прошивки 10 хеш плат нормально работают именно эти хеш платы оставил в конце поставил все три и вот темп не считывает. может быть что пик не считывает темпер..???
  9. С чем связана такая проблема с темп...? И в статусе майнера нету температуры надо минять датчик темп или же проблема в чипах? Разок показал -4 град Miner fix freq ... read PIC voltage=940 on chain[5] Chain:5 chipnum=63 Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 Chain:5 max freq=650 Chain:5 min freq=650 max freq = 650 set baud=1 Chain[J6] PIC temp offset=62,-4,0,0,0,0,33,0 chain[5] temp chip I2C addr=0x98 Chain[J6] chip[244] use PIC middle temp offset=-4 typeID=55 New offset Chain[5] chip[244] local:61 remote:-126 offset:27 Chain[J6] chip[244] get middle temp offset=27 typeID=55 Chain[J6] set working voltage=870 [125] setStartTimePoint total_tv_start_sys=240 total_tv_end_sys=241 restartNum = 2 , auto-reinit enabled... do read_temp_func once... do check_asic_reg 0x08
  10. Ребята подскажите пожалуйста какую прашивку поставить для ремонта хеш плат repair на т9+ ? поставил одну но на кантрольки начала просить пик потом опять вернулся на вниш и все стало норма. Не успеваю находить испорчины чип так сразу вык питание?
  11. @romariogland Ну для того чтобы хеш платы ремонтировать там без вентилятора запускается а вниш просит вен.... хочу поставить вот эту прошивку 2Repair_s9_t9_fw.tar.gz
  12. Здраствуйте. Как сбросить прошивку т9+ от вниш? Хочу поставить прошивку для тестирование хеш плат
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...